tp-link UH9120C USB Type-C Hub User Guide

When not in use, unplug external peripherals before disconnecting the hub from your host device.
If using a PD charger to charge your host device:
- A) The USB-C PD port is for charging only, no data transfer.
- B) Use an original or certified PD charger that meets the port’s input specifications.

FAQ

Q: Do I need to install drivers for all the ports on the hub?
- A: Most ports, including USB, HDMI, and card slots, support Plug and Play on common operating systems. However, the gigabit Ethernet port may require installing a driver for compatibility with certain older systems. Visit our official website for driver downloads.
Q: Can I use this hub with gaming consoles like Nintendo Switch?
- A: Yes, this hub is compatible with Nintendo OS and can be used with devices like Nintendo Switch for additional connectivity options.
Q: Is this hub compatible with mobile devices like iPads and Android phones?
- A: Yes, this hub is compatible with various mobile operating systems such as iPad OS, iOS, and Android OS for expanding connectivity and data transfer capabilities.

Quick Installation Guide

USB Type-C Hub

Product Overview

USB-C Connector	For connecting to your host device.
USB-C PD (Power Delivery) Port*	For unidirectionally charging your host device when connected to a PD charger. PD 3.0; Up to 100W Does not support data transfer.
USB-C Port	USB 3.0; 5 Gbps data transfer
HDMI Port	Up to 4K@60Hz (backward compatible)
TF (microSD) Card Slot SD Card Slot	SD 3.0; UHS-I, 104 MB/s Supports simultaneously reading and writing two cards
Gigabit Ethernet Port	For connecting to a wired network provided by a router, modem, etc.
USB-A Ports ×3	USB 3.0; 5 Gbps data transfer

Note: The ports’ actual performance may vary based on your host device specifications.

Input	PD: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A USB-C Connector 5V/3A
Supported Systems	Windows, Mac OS, iPad OS, iOS, Google Chrome OS, Linux OS, Nintendo OS, Android OS
Plug and Play	USB-C PD port, USB-C port, HDMI port, TF (microSD) card slot, SD card slot, USB-A ports, gigabit Ethernet port.* The gigabit Ethernet port may require installing a driver for compatibility with certain older operating systems. Please visit our official website at www.tp-link.com to download the necessary driver for these systems Windows 7/8 Mac OS X 10.9 to 10.15

Using the Hub
This hub supports the Plug and Play feature. Plug the USB-C connector into your host device, then plug in your external peripheral into the corresponding port of the hub.

Note: A PD charger (not included) is not required. If you wish to use a PD charger to charge your host device, please refer to Tips (2B).

Tips:

When not in use, please unplug or remove the external peripherals from the hub first, and then unplug the hub from your host device.
If you need to connect a PD charger to the hub’s USB-C PD port, please:
- Notice that it only has the charging function and is input only.
- Use an original or certified PD charger to charge your host device. The output of the PD charger should meet the input specifications of the USB-C PD port.

Safety Information

When the product has a power button, the power button is one of the ways to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Keep the device away from water, fire, humidity or hot environments.
This equipment can be powered only by equipments that comply with Power Source Class 2 (PS2) or Limited Power Source (LPS) defined in the standard of IEC 62368-1.

Recycling

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/