ESP32-PICO-D4 BalaC PLUS Dalawang-Gulong
Balanse Car PID Programming Pag-aaral ng Smart Car Graphics
User Manual

ESP32-PICO-D4 BalaC PLUS Dalawang-Gulong Balanse ng Sasakyan PID Programming Pag-aaral ng Smart Car Graphics

1. Alisin ang adhesive tape sa main board.
2. Idikit ang servo sa ipinahiwatig na posisyon, ang direksyon ng motor ay tulad ng ipinapakita.
   
3. Ang rubber band ay ginagamit upang ayusin ang pangunahing board at ang servo.
4. Ang rubber band ay ginagamit upang ayusin ang pangunahing board, Red ay kumakatawan sa positibo, itim ay kumakatawan sa negatibo, tulad ng ipinapakita.
5. Magtipon ng MSStickC Plus
6. Magtipon ng Gulong
7. Pag-install Better

Lahat ng bahagi

www.M5Stark.com

Mga Dokumento / Mga Mapagkukunan

M5STACK ESP32-PICO-D4 BalaC PLUS Two-Wheeled Balance PID Programming ng Sasakyan Pag-aaral ng Smart Car Graphics [pdf] User Manual ESP32-PICO-D4 BalaC PLUS Two-Wheeled Balance Car PID Programming Learning Smart Car Graphics, ESP32-PICO-D4, BalaC PLUS Two-Wheeled Balance Car PID Programming Learning Smart Car Graphics, PLUS Two-Wheeled Balance Car PID Programming Learning Smart Car Graphics, Wheeled Balance Car PID Programming Learning Smart Car Graphics, Balance Car PID Programming Learning Smart Car Graphics, PID Programming Learning Smart Car Graphics, Learning Smart Car Graphics, Car Graphics, Graphics

Mga sanggunian

• User Manual