ESP32-PICO-D4 BalaC PLUS Two-Wheeled
Balance Car PID Programming Learje Smart Car Graphics
User Manual

ESP32-PICO-D4 BalaC PLUS Twa-Wheel Balance Car PID-programmearring Learje Smart Car Graphics

1. Fuortsmite de adhesive tape op de wichtichste bestjoer.
2. Plak de servo op 'e oantsjutte posysje, de rjochting fan' e motor is lykas werjûn.
   
3. De rubberen band wurdt brûkt om fêst te stellen it haadboerd en de servo.
4. De rubberen band wurdt brûkt om fêst te stellen de wichtichste bestjoer, Red stiet foar posityf, swart stiet foar negatyf, as shown.
5. Meitsje MSStickC Plus gear
6. Sammelje Wheel
7. Ynstallaasje Bettery

ALLE dielen

www.M5Stark.com

Dokuminten / Resources

M5STACK ESP32-PICO-D4 BalaC PLUS Twa-Wheel Balance Car PID-programmearring Learje Smart Car Graphics [pdf] Brûkershânlieding ESP32-PICO-D4 BalaC PLUS Twa-Wheel Balance Car PID Programming Learje Smart Car Graphics, ESP32-PICO-D4, BalaC PLUS Twa-Wheel Balance Car PID Programming Learje Smart Car Graphics, PLUS Twa-Wheel Balance Car PID Programming Learje Smart Car Graphics, Wheeled Balance Car PID Programming Learning Smart Car Graphics, Balance Car PID Programming Learning Smart Car Graphics, PID Programming Learning Smart Car Graphics, Learning Smart Car Graphics, Auto Graphics, Graphics

Referinsjes

• User Manual