TKH SECURITY BL2026M 6MP IP Bullet Camera

TKH SECURITY BL2026M 6MP IP Bullet Camera

Unpack

  • Camera Unit
    Unpack
  • Mounting Adapter
    Unpack
  • Quick Start Guide
    Unpack
  • CAT-6 RJ45 conduit & Pin pusher
    Unpack
  • Screws(4x) & Plastic Screw Anchors (4x
    Unpack
  • Security Torx
    Unpack

Subject to modification. Actual product and accessories may differ in appearance.

Connector Definition

Table 1 Connector definition 

No. Connector Definition
1 Alarm I/O Alarm I/O connection
2 Audio I/O Line In and Line Out connection
3 RJ-45 Port For network and PoE connections. Please contact Siqura for a compatible PoE injecter.
4 Power(DC 12V) Power Connection
5 Micro SD Card Slot Insert the SD card into the card slot to store videos and snapshots. Do not remove the SD card when the camera is powered on.
6 Reset Button To restore camera to factory defaults, power up with Reset button pressed for at least 10s.

Installation Notices

Symbol Caution installation shall be performed by qualified personnel only. Installation shall be in accordance with local procedures. The camera contains batteries. Battery replacement shall not be applied in view of the risk of explosion. Dispose of used batteries according to the instructions.

For “PoE” input connection, use only with UL listed I.T.E. with “PoE” output. Description for the “PoE” is intended to be connected to not exposed (outside plant) networks or equivalent statement in installation instructions.

Camera Cabling

  • Figure 2 Cabling
    Camera Cabling

Connectors

  • Figure 1 Camera Connectors
    Connectors

Waterproof Notice

Bullet camera is suggested to be mounted either by wall/pole mount or ceiling mount. Other mounting may cause potential water leakage at camera, which is not covered in warranty.

  • Figure 3 Wall/Pole Mount
    Waterproof Notice
  • Figure 4 Ceiling Mount
    Waterproof Notice

Accessing the Camera – DHCP

Accessing the Camera - DHCP

1st time camera login

Set a strong password

1st time camera login

Accessing the camera – Fixed IP

Accessing the camera – Fixed IP

1st time camera login

1st time camera login

Auto detect with SDM2

Auto detect with SDM2

QR Code
Enter to the camera product page.

Auto detect with SDM2
Auto detect with SDM2

Browser-based Viewer

Symbol It is not recommended to continuously (24/7) record with the micro-SD card, as the camera may not support long-term continuous data read/write. Contact the manufacturer of the micro-SD card for information regarding the reliability and the life expectancy.

Customer Support

Symbol Find additional manuals, the datasheet, the EU Declaration of Conformity, and the latest firmware for this product at:  tkhsecurity.com

QR Code

Manufacturer information: 

Name:  TKH Security B.V.
Address: Werner von Siemensstraat 7, 2712PN, Netherlands
Email: info.nl@tkhsecurity.com

Symbol

© TKH Security B.V. 2024 | Version 2 (20241209) | BL2026M-QS-EN

Documents / Resources

TKH SECURITY BL2026M 6MP IP Bullet Camera [pdf] User Guide
BL2026M 6MP IP Bullet Camera, BL2026M, 6MP IP Bullet Camera, Bullet Camera, Camera

References

Leave a comment

Your email address will not be published. Required fields are marked *