MB-T16-RCF Rotatable Circular Filter Tray for Tilta Mirage User Manual

HOW TO USE THE ROTATABLE CIRCULAR FILTER TRAY

The circular filter tray is for installing a 95mm circular filter. It is compatible with all major filter manufactuers 95mm circular filters, such as MD filters star cross filters, black mist filters, white mist filters, etc.

INSTALLATION

1. PLACE THE FILTER INTO
   1. the filter tray slot. Pull
   2. the locking toggle  to allow the filter to fit into
   3. the filter tray. Release the locking toggle to complete the installation.
2. PULL
   1. the locking toggleto releae the filter holder, and slide
   2. THE FILTER TRAY WITH FILTER into the slot.

MANUAL CONTROL

Toggle the adjustment wheel on the top right of the rotatable circular filter tray to control the filter to the desired setting.

PAIRING WITH 95mm STACKABLE CIRCULAR FILTER TRAY AND 93mm VARIABLE ND

SLIDE

1. the 95mm circular filter tray with filter into the 95mm stackable circular filter tray.
   MOUNT
2. the variable ND and
3. the matte box body.
4. tighten the tie sown screws.

Documents / Resources

TILTA MB-T16-RCF Rotatable Circular Filter Tray for Tilta Mirage [pdf] User Manual MB-T16-RCF Rotatable Circular Filter Tray for Tilta Mirage, MB-T16-RCF, Rotatable Circular Filter Tray for Tilta Mirage, Circular Filter Tray for Tilta Mirage, Filter Tray for Tilta Mirage, Tray for Tilta Mirage, Tilta Mirage, Mirage

References

• User Manual