MB-T16-DCF Dual Circular Filter Tray for Tilta Mirage
The circular filter tray is for installing a 95mm circular filter. It is compatible with all major filter manufacturers 95mm circular filters, such as ND filters, streak filters, star-cross filters, black mist filters, white mist filters, etc.
INSTALLATION
- Place the filter into 1 the filter tray slot. Pull2 the locking toggle to allow the filter to fit into 3 the filter tray. Release the locking toggle to complete the installation.
- Pull 4 the locking toggleto release the filter holder, and slide 5 the filter tray with filter into the slot.
Installing 95mm Circular Filter
- Pull the locking toggle to release the filter holder.
Pairing
Pairing with 95mm Stackable Circular Filter Tray & 95mm Variable ND
- Slide 1 the 95mm circular filter tray with filter into the 95mm stackable circular filter tray.
- Mount 2 the variable ND and 3 the matte box body. Tighten the tie down screws.
Documents / Resources
 |
TILTA MB-T16-DCF Dual Circular Filter Tray for Tilta Mirage [pdf] Instructions MB-T16-DCF Dual Circular Filter Tray for Tilta Mirage, MB-T16-DCF, Dual Circular Filter Tray for Tilta Mirage, Filter Tray for Tilta Mirage, Tray for Tilta Mirage, Tilta Mirage, Mirage |
