THINKWARE ARC700 Dash Camera
Power the Dash Cam
Use one of the following options
The included cable options vary depending on the dash cam model purchased.
*To enable Parking Surveillance mode, the dash cam needs to be powered by either the 0B0-11 Cable or Hardwiring Cable (professional installation recommended).
We strongly recommend professional installation by a trained mechanic. Contact an authorized service center to connect the hardwiring cable to the vehicle. If the product is not installed properly, the product may be damaged, or an electrical fire or electrocution may occur.
Download the App
Download the THINKWARE DASHCAM LINK App
On your smartphone, open the Google Play Store or Apple App Store and download and install THINKWARE DASH CAM LINK .
Connect to the App
Follow the on-screen instructions
- Press the Wi-Fi
button on the Dash Cam for at least 3 seconds.
- Hold for more than 3 sec
- Wi-Fi LED Blue Flickers
Won’t Connect to the App? 
Install the Front Camera
Selecting an installation location
Install the front camera at the center of the windshield without blocking the driver’s view while driving.
Remove the protective film from the dash cam lens.
Open Live View in the app
- Blue line with the center
- Green line with the front edge of the hood
Dash Cam Settings in the App
Default settings out of the box
The default settings are as follows, and you have the option to adjust them according to your preference.
FAQ & Help Desk
Still have questions or issues?
For further assistance or to report any issues, please contact our support team.
- North America (844) 865-9273 support@thinkware.com
- United Kingdom 44 (o) 333-121-0008 support.eu@thinkware.com
- European Union (+49) 69-943-22200 support@thinkware.com
Please refer to CS Information QR in the box for other countries.
Documents / Resources
 | ARC700 Dash Camera |
References
- User Manualmanual.tools