TECH sinum CR-01 Wireless Multi Sensor
Setup
- Open a web browser and go to the address of your Sinum Central device; log in.
- In the main control panel, navigate to Settings > Devices > Wireless devices > +.
- Briefly press the registration button (①) on the CR-01 sensor.
- Wait for a successful registration confirmation message on the screen.
- Name the device and assign it to a specific room.
PRODUCT INFO
The CR-01 motion sensor is a wireless and multifunctional device which detects movement in a room. The design of the device allows it to be put in any place or mounted on a wall. The movable head makes it possible to adjust its direction.
The CR-01 sensor communicates with the Sinum central device wirelessly and it allows you to increase security, e.g. by switching on the light, alarm or other pre-programmed scenes.
Built-in sensors: motion sensor, temperature sensor, humidity sensor, light sensor
How to register the device in the sinum system
Enter the address of the Sinum central device in the browser and log in to the device.
In the main panel, click the Settings > Devices > Wireless devices > + . Then briefly press the registration button 1 on the device. After a properly completed registration process, an appropriate message will appear on the screen. Additionally, the user can name the device and assign it to a specific room.
In the main panel, click the Settings > Devices > Wireless devices > + . Then briefly press the registration button 1 on the device. After a properly completed registration process, an appropriate message will appear on the screen. Additionally, the user can name the device and assign it to a specific room.
Technical data
- Power Supply: 1 × CR123A battery
- Operation Temperature: 5°C to 50°C
- Measurement Error: ±0.5°C
- Humidity Measurement Range: 10% to 95% RH
- IP Rating: IP20
- Operation Frequency: 868 MHz
- Maximum Transmission Power: 25 mW
INSTALLATION
SAFETY
Notes
- TECH Controllers is not responsible for any damages resulting from improper use of the system.
- The range depends on the conditions in which the device is used and the structure and materials used in the object construction.
- The manufacturer reserves the right to improve devices, update software and related documentation.
- The graphics are provided for illustration purposes only and may differ slightly from the actual look.
- The diagrams serve as examples. All changes are updated on an ongoing basis on the manufacturer’s website.
- Before using the device for the first time, read the following regulations carefully.
- Not obeying these instructions may lead to personal injuries or controller damage.
- The device should be installed by a qualified person. It is not intended to be operated by children.
- It is a live electrical device.
- Make sure the device is disconnected from the mains before performing any activities involving the power supply (plugging cables, installing the device etc.).
- The device is not water resistant.
The product may not be disposed of to household waste containers.
The user is obliged to transfer their used equipment to a collection point where all electric and electronic components will be recycled.
The user is obliged to transfer their used equipment to a collection point where all electric and electronic components will be recycled.
EU Declaration of conformity
Tech Sterowniki II Sp. z o.o. , ul. Biała Droga 34, Wieprz (34-122)
Hereby, we declare under our sole responsibility that the motion sensor CR-01 is compliant with Directive 2014/53/EU.
Hereby, we declare under our sole responsibility that the motion sensor CR-01 is compliant with Directive 2014/53/EU.
- Wieprz, 01.06.2023
The full text of the EU declaration of conformity and the user manual are available after scanning the QR code or at www.tech-controllers.com/manuals
Troubleshooting
- No successful registration / no confirmation message: Ensure you follow the registration sequence in the Sinum Central interface (Settings > Devices > Wireless devices > +) and briefly press the CR-01 sensor’s registration button (①.
- Unreliable wireless communication: Wireless transmission range depends on environmental conditions, building design, and structural materials—relocation or improved placement may be necessary.
- Protection from moisture: The device is not waterproof (IP20). Keep it protected from moisture and direct water exposure.
MORE INFO
www.tech-controllers.com/manuals
- tel: +48 33 875 93 80
- serwis.sinum@techsterowniki.pl
Documents / Resources
 | CR-01 Wireless Multi Sensor |
References
- families_no_addresswww.tech-controllers.com
- families_no_addresswww.tech-controllers.com
- families_no_addresswww.tech-controllers.com
- TECH Controllers - Teplo ve Vašem doměwww.tech-controllers.cz
- Intelligens fűtés-hűtés, fűtési-hűtési megoldások - TECH vezérlők gyártója | TECH vezérlőkwww.tech-controllers.hu
- Tech Controllerswww.tech-controllers.ro
- TECH Controllers - Teplo vo Vašom domewww.tech-reg.sk
- User Manualmanual.tools
Published: October 9, 2026