Wireless Thermostat Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Wireless Thermostat products.

Tip: include the full model number printed on your Wireless Thermostat label for the best match.

Wireless Thermostat manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

SKYTECH TS-R-2A Wireless Thermostat Instruction Manual

March 12, 2026
SKYTECH TS-R-2A Wireless Thermostat Specifications Batteries Wall Transmitter 6V – 2ea. (CR2032) 3.0 volt lithium button cell batteries Remote Receiver 6V – 4ea. AA 1.5 Alkaline Operating Frequency 303.8MHZ FCC ID No.'s Transmitter – (K9L TS-R-2A); Receiver – (K9L 3301RX)…

AURATON Heat Monitor Wireless Thermostat Owner’s Manual

February 9, 2026
AURATON Heat Monitor Wireless Thermostat Specifications Specification Details Working temperature range 0 – 45°C Temperature measurement range 0 – 45°C Temperature control range 0 – 40°C Hysteresis ±0.2°C Temperature setting accuracy 0.1°C Temperature measurement accuracy 0.1°C Default temperature setting 21°C…

Beok BOT-506 Wireless Thermostat User Guide

October 12, 2025
BOT-506 Wireless Thermostat User Guide ◼ Application The wireless intelligent one - to - one temperature controller for underfloor heating systems controls gas - fired wall - hung boilers and electric valves. It compares ambient and set temperatures to regulate…

beok R15X Tuya Wifi Wireless Thermostat User Manual

October 6, 2025
beok R15X Tuya Wifi Wireless Thermostat Product Information Specifications: Default Temperature for Home Mode: 16°C Language Options: English, Spanish, French Product Usage Instructions Operating Modes: The product has different modes for different settings: Home Mode: Default temperature is set to…

DIGITEN WTC1001 Wireless Thermostat User Manual

September 19, 2025
DIGITEN WTC1001 Wireless Thermostat Product Usage Instructions Turning On/Off and Pairing: To manually turn on or off the product, short-press the power button. For pairing with a remote, long-press the power button. Setting Temperature: To set the desired temperature, use…