ENGO CONTROLS specializes in modern heating control systems, smart thermostats, and home automation devices designed for energy efficiency and comfort.
ENGO CONTROLS is a manufacturer of advanced heating control solutions and smart home devices. Their product lineup includes wireless and wired thermostats, smart plugs, relays, and solar-powered cameras, all designed to integrate seamlessly into modern homes.
Leveraging ZigBee 3.0 and Wi-Fi technologies, ENGO CONTROLS provides users with precise temperature management and remote access via the ENGO Smart mobile application. The brand focuses on energy savings, ease of installation, and reliable performance for underfloor heating, radiator systems, and general electrical control.
Selected manuals from manuals+ curated for this brand.
Featured manuals are a limited selection. Search for more manuals.
Additional documents are a limited selection. Search all manuals.
Common questions about manuals, registration, and support for this brand.
To perform a factory reset on most ENGO thermostats, hold down the minus (–) and plus (+) buttons simultaneously until the 'FA' message appears on the display. Then follow the on-screen prompts to confirm the reset.
ENGO devices are controlled via the ENGO Smart app, which is available on Google Play and the Apple App Store. The app is also compatible with the Tuya ecosystem.
Yes, for ZigBee-based devices like the E25 thermostat or smart plugs, an internet gateway (such as the EGATEZB) is required to control them remotely via the mobile app and to enable binding functions.
Yes, many ENGO thermostats support both heating and cooling modes. You can typically switch between modes by holding a specific button combination (e.g., minus and checkmark) for 3 seconds.
Most controllers and thermostats are for indoor use only. However, specific products like the ECAM-SOLAR camera are IP65 rated and designed for outdoor environments.