Timer Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Timer products.

Tip: include the full model number printed on your Timer label for the best match.

Timer manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

EZAIoT WT702-WF-NH-FM Solar WiFi Water Timer User Manual

July 14, 2026
Smart Dual-Outlet Wi-Fi Solar Water Timer User Manual Wi-Fi 71.04.00814 Version:1.1.2 Accessory List Important Notice Please read and follow the important guidelines below: For outdoor use only; Install it in a location with good sunlight for optimal solar charging. Keep…

Diivoo DI-WT23M1 0ut Let Water Timer User Manual

June 29, 2026
Diivoo DI-WT23M1 0ut Let Water Timer PRODUCT SPECIFICATIONS Water Timer Temperature operating range 4.5°°C-45°°C/40.1°F-113°F Pressure operating range Power supply 7.25~116PSI/0.5~8bar Alkaline battery AA*4 (not included) Important Information Do not allow the timer to freeze. Drain the water, remove batteries, and…

G-Homa HU02M Daily Mechanical Timer Instruction Manual

June 25, 2026
G-Homa HU02M Daily Mechanical Timer Specifications Type: Mechanical Timer Timing Interval: Daily Minimum Setting Unit: Typically 15 or 30 minutes (refer to dial markings) Maximum Settings Per Day: Varies by model, usually 24-48 ON/OFF cycles Power Rating: (e.g., 125V AC,…

Baccara SGW02 Smart Dual Water Timer User Manual

June 24, 2026
Baccara SGW02 Smart Dual Water Timer Meet the Smart Dual Water Timer Specification NOTE: Water Timer and Gateway should be placed at an appropriate distance according to the actual usage nviromt. Please find the best placement to ensure e the…

Ymlike SWV002 Bluetooth Smart Sprinkler Water Timer User Manual

June 16, 2026
Ymlike SWV002 Bluetooth Smart Sprinkler Water Timer PRODUCT OVERVIEW Specifications Working Pressure: 0.5bar-8bar (7.25 psi-116 psi) Flow Rate: 5L/Min-35L/Min Working Temperature: 2-50℃ Waterproof: IP54 Inlet: NH(US) for 3/4" faucet/hose; BSP (EU) for 1" or 3/4" faucet/hose Outlet: For 3/4" standard…