FLEX Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for FLEX products.

Tip: include the full model number printed on your FLEX label for the best match.

FLEX manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

FLEX HG 650 2000 Heat Gun Instruction Manual

December 13, 2024

FLEX HG 650 2000 Heat Gun Specifications Tool Type: Heat Gun Model: HG 650 2000 Rated Voltage: 220-240V Frequency: 50/60Hz Input Power: 2000W Air Flow: Level 1: 500 l/min, Level 2: 250 l/min, Level 3: 500 l/min Temperature: Level 3:…

Brand: FLEX

FLEX 17-11 125 Power Tools Instruction Manual

December 8, 2024

Symbols used in this manual WARNING! Denotes impending danger. Nonobservance of this warning may result in death or extremely severe injuries. CAUTION! Denotes a possibly dangerous situation. Non-observance of this warning may result in slight injury or damage to property.…

Brand: FLEX

FLEX DWL 2500 LED Battery Powered Work Light Instruction Manual

December 8, 2024

FLEX DWL 2500 LED Battery Powered Work Light FAQs What should I do if the light source stops working? If the lamp stops functioning due to a defect or reaching its maximum lifespan, replace the entire lamp as the light…

Brand: FLEX

FLEX DCG L 26-6 230 G Diamond Cutting System Owner’s Manual

December 6, 2024

FLEX DCG L 26-6 230 G Diamond Cutting System Product Information Specifications Power Consumption: 2600 W Power Output: 1800 W Voltage: 230 V Frequency: 50/60 Hz Max. Disc Diameter: 230 mm No-load Speed: 6500 rpm Tool Holder: M14 Cable Length:…

Brand: FLEX

clover Flex Handheld POS System User Guide

December 5, 2024

clover Flex Handheld POS System USER GUIDE clover.com/help Included Inclus Im Lieferumfangs Se incluye Inclusief Incluído Select regions Observe the following safety precautions. Failure to do so may result in equipment failure, damage, or heat-induced burns. 1.…

Brand: clover

LEDALITE Tru Groove Micro Flex Installation Guide

November 26, 2024

Architectural Linear TruGroove Micro Flex ID – TM Flex Suspended IMPORTANT: Read all instructions including fixture/sensor wiring AND mechanical details before beginning installation. ATTENTION: Install in accordance with local and national building and electrical codes Install Instructions This equipment has…

Brand: LEDALITE

FLEX FX7221 24V Table Saw Instruction Manual

November 9, 2024

FLEX FX7221 24V Table Saw Specifications Model: FX7221 Model Number: 833-FLEX-496 (833-3539-496) Website: www.Registermyflex.com Safety Symbols and Alerts The purpose of safety symbols is to attract your attention to possible dangers. It is important to understand and follow all safety…

Brand: FLEX

FLEX 531335 Slender Seal User Guide

November 8, 2024

FLEX 531335 Slender Seal FLEX Accessories Slender Seal Model: 531335 / GRF-LS VL Maximum Load: 60 kg Installation Instructions Prepare the surface by ensuring it is clean and free of debris. Diagram 1: Shows the initial position of the seal.…

Brand: FLEX

FLEX 531333 Standard Seal Instruction Manual

November 8, 2024

FLEX 531333 Standard Seal Standard seal Brace seal Rock seal FLEX-Elektrowerkzeuge GmbH Bahnhofstr. 15 71711 Steinheim/Murr Tel. +49 (0) 7144 828-0 Fax +49 (0) 7144 25899 info@flex-tools.com www.flex-tools.com

Brand: FLEX

FLEX FX4311B 24V 15GA Angled Nailer Instruction Manual

November 5, 2024

FLEX FX4311B 24V 15GA Angled Nailer Specifications: Model: FX4311B Model Number: 833-FLEX-496 (833-3539-496) Website: www.Registermyflex.com Language: English Product Information: The FX4311B is a power tool designed for various applications. It comes with safety symbols and warnings to ensure user safety…

Brand: FLEX

FLEX GPH 18-EC Kombimotor Bedienungsanleitung

Operating Instructions • December 28, 2025

Umfassende Bedienungsanleitung und Sicherheitshinweise für den FLEX GPH 18-EC Kombimotor, einschließlich Montage, Verwendung, Wartung und Entsorgung.

Brand: FLEX

FLEX FX4311B 24V 15GA Angled Nailer Operator's Manual

Operator's Manual • December 24, 2025

This operator's manual provides essential safety instructions, operating procedures, assembly details, and maintenance guidelines for the FLEX FX4311B 24V 15GA Angled Nailer. Learn how to safely use and care for your FLEX nailer.

Brand: FLEX

FLEX DCG AG 230 Concrete Grinder/Cutter - User Manual & Specifications

instruction guide • December 23, 2025

User manual and technical specifications for the FLEX DCG AG 230 electric concrete grinder/cutter (model 471.895). Details assembly, safety precautions, disc specifications, and usage with dust extraction and cutting guides.

Brand: FLEX

FLEX GBC-A Motorsense-Anbauwerkzeug: Bedienungsanleitung und Sicherheitshinweise

Operating Instructions • December 10, 2025

Umfassende Bedienungsanleitung und Sicherheitshinweise für das FLEX GBC-A Motorsense-Anbauwerkzeug. Enthält Montage-, Bedienungs-, Wartungs- und Sicherheitsempfehlungen für den professionellen Einsatz.

Brand: FLEX

FLEX LBE 20-11 125-EC Szlifierka Kątowa 2000W - Specyfikacja Techniczna

Product Overview • December 10, 2025

Szczegółowy opis szlifierki kątowej FLEX LBE 20-11 125-EC z silnikiem 2000W, zmienną prędkością, hamulcem i średnicą tarczy 125 mm. Zawiera dane techniczne, funkcje i wyposażenie podstawowe.

Brand: FLEX

FLEX ORE 2-125 18-EC, OSE 2-80 18-EC, ODE 2-100 18-EC Akku-Schleifer Bedienungsanleitung

manual • November 28, 2025

Entdecken Sie die Bedienungsanleitung für die leistungsstarken Akku-Schleifer von FLEX: Modelle ORE 2-125 18-EC, OSE 2-80 18-EC und ODE 2-100 18-EC. Erfahren Sie mehr über sichere Anwendung, Wartung und technische Daten.

Brand: FLEX

FLEX XFE 15 18.0-EC / XCE 8 18.0-EC Cordless Orbital Polisher Manual

Instruction Manual • November 25, 2025

Comprehensive instruction manual for FLEX XFE 15 18.0-EC and XCE 8 18.0-EC cordless orbital polishers, covering safety, operation, technical specifications, and maintenance.

Brand: FLEX

FLEX GPS-A Hochentaster-Anbauwerkzeug Bedienungsanleitung

User Manual • November 8, 2025

Die offizielle Bedienungsanleitung für das FLEX GPS-A Hochentaster-Anbauwerkzeug. Enthält wichtige Sicherheitshinweise, Bedienungsanleitungen, Montageanweisungen, Wartungstipps und technische Daten für den gewerblichen Einsatz.

Brand: FLEX

FLEX DD 4G 18.0-EC/5.0 Set 18V Cordless Drill/Driver - 4-Speed Technical Specifications

Technical Specification • November 4, 2025

Comprehensive technical specifications and features for the FLEX DD 4G 18.0-EC/5.0 Set, an 18V cordless drill/driver with 4-speed transmission, brushless motor, EMS, and included accessories like batteries and charger. Details include performance data, dimensions, and equipment.

Brand: FLEX

FLEX DD 2G 18.0-EC LD C Trapano Avvitatore a Batteria - Panoramica Tecnica

Product Overview • November 3, 2025

Scopri il FLEX DD 2G 18.0-EC LD C, un trapano avvitatore compatto a batteria da 18V con 2 velocità. Caratteristiche includono EMS, motore brushless, mandrino a sgancio rapido e luce LED. Ideale per uso professionale. Include specifiche tecniche e dotazione.

Brand: FLEX

FLEX DD 2G 18.0-EC LD/2.5 Set Akkuporakone Tekniset Tiedot

Technical Specification • November 3, 2025

Kompakti 2-nopeuksinen 18 V FLEX DD 2G 18.0-EC LD/2.5 Set akkuporakoneen tekniset tiedot, ominaisuudet ja toimitusvarustus. Ihanteellinen työkalu monipuolisiin töihin.

Brand: FLEX

FLEX DD 2G 18.0-EC LD C 18V Cordless Drill - Features and Technical Specifications

Technical Specification • November 3, 2025

Comprehensive details on the FLEX DD 2G 18.0-EC LD C 18V cordless drill, highlighting its compact design, brushless motor, 2-speed functionality, and key technical specifications for professional use. Includes delivery contents.

Brand: FLEX