T LED HN2K 4 Key Panel RF Remote Controller
Product Information
Specifications
- Model: HN2K
- Dimensions:
- Length: 86.00 mm
- Width: 14.00 mm
- Height: 12.00 mm
- Baseplate: 50.00 mm
- Features:
- Apply to single color
- Each remote can match one or more receiver
- CR2032 battery powered
- Removable and easy to stick anywhere or mount on a wall using a panel base
- Technical Parameters:
- Input and Output: RF(2.4GHz)
- Output signal: 3VDC(CR2032)
- Working voltage: 5mA
- Standby current: 2A
- Standby time: 2 years
- Remote distance: 30m (Barrier-free space)
- Environment:
- Operation temperature: -30°C to +55°C
- IP rating: IP20
- Safety and EMC:
- EMC standard: ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-17 V3.2.4
- Safety standard: EN 62368-1:2020+A11:2020
- Radio Equipment: ETSI EN 300 328 V2.2.2, CE, EMC, LVD, REDCertification
- Warranty: 3 years
- Weight:
- Net weight: 0.057kg
- Gross weight: 0.075kg
Product Usage Instructions
Replace Battery:
Before the first use, remove the protective film on the battery.
Installation Diagram:
To fix the panel:
Two options are offered for selection:
- Fix it on the wall with two screws.
- Adhere it to the wall with a plaster.
Key Functions:
Zone1:
- Zone1 on / Zone1 off
- Zone2 on / Zone2 off
- Zone 1-2 on: Short press to turn on zone light, long press (1-6s) to increase brightness continuously.
- Zone 1-2 off: Short press to turn off zone light, long press (1-6s) to decrease brightness continuously.
Match Remote Control (Two Match Ways):
Option 1:
Match:
- Short press match key, immediately press on/off key on the remote. The LED indicator fast flashes a few times means match is successful.
Delete:
- Press and hold match key for 5s to delete all matches. The LED indicator fast flashes a few times means all matched remotes were deleted.
Frequently Asked Questions
Q: What should I do if there is no response from the receiver?
A: Please re-match the remote control with the receiver.
Model No.: HN2K
2 Zone Dimming
Features
- Apply to single color
- Each remote can match one or more receiver.
- CR2032 battery powered.
- Removeable and stick anywhere easily, or mount on wall use panel base.
Technical Parameters
| Input and Output | |
| Output signal | RF(2.4GHz) |
| Working voltage | 3VDC(CR2032) |
| Working current | ＜5mA |
| Standby current | ＜2μA |
| Standby time | 2 years |
| Remote distance | 30m(Barrier-free space) |
| Environment | |
| Operation temperature | Ta: -30 OC ~ +55 OC |
| IP rating | IP20 |
| Safety and EMC | |
| EMC standard (EMC) | ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4 |
| Safety standard(LVD) | EN 62368-1:2020+A11:2020 |
| Radio Equipment(RED) | ETSI EN 300 328 V2.2.2 |
| Certification | CE,EMC,LVD,RED |
| Weight | |
| Net weight | 0.057kg |
| Gross weight | 0.075kg |
Mechanical Structures and Installations
To fix the panel, two options are offered for selection:
- Option 1: fix it on the wall with two screws.
- Option 2: adhere it to the wall with paster.
Key function
Zone 1 2 on: Short press turn on zone light,long press 1-6s to increase brightness continuously.
Zone 1-2 off: Short press turn off zone light,long press 1-6s to decrease brightness continuously.
Match Remote Control
(two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match:
Short press match key, immediately press on/off key on the remote.
The LED indicator fast flash a few times means match is successful.
Delete:
Press and hold match key for 5s to delete all match,The LED indicator fast flash a few times means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Safety information
- Read all instructions carefully before you begin this installation.
- When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery. - If no response from the receiver, please re-match the remote.
- Gently handle remote, beware of falling.
- For indoor and dry location use only.
Documents / Resources
 |
T LED HN2K 4 Key Panel RF Remote Controller [pdf] Owner's Manual HN2K, HN2K 4 Key Panel RF Remote Controller, HN2K, 4 Key Panel RF Remote Controller, Key Panel RF Remote Controller, Panel RF Remote Controller, RF Remote Controller, Remote Controller, Controller |
