KPERFORMANCE be O2 Kidhibiti Kidogo cha EGT KINAWEZA Mwongozo wa Mtumiaji wa Basi
Yaliyomo kwenye Kifurushi
EGT Ndogo inapaswa kujumuisha Vipengee vifuatavyo:
- 1x bodi ya mzunguko na vipengele vya mlima wa soldered
- 1x Kiunganishi cha MicroMolex
- Vipokezi vya 12x vya MicroMolex
- 1x kipochi kilichochapishwa cha 3D
Viunganisho vya umeme
| C1 | Kazi | |
| 1 | SUPU | CanBus HIGH |
| 2 | Tc2 | Tc2 Analogi OUT AU Spare Analogi 2 IN |
| 3 | Tc4 | Tc4 Analogi OUT AU Spare Analogi 4 IN |
| 4 | Tc6 | Tc6 Analogi OUT AU Spare Analogi 6 IN |
| 5 | 5V | +5V Ugavi OUT |
| 6 | GND | Ardhi |
| 7 | CANL | CanBus CHINI |
| 8 | Tc1 | Tc1 Analogi OUT AU Spare Analogi 1 IN |
| 9 | Tc3 | Tc3 Analogi OUT AU Spare Analogi 3 IN |
| 10 | Tc5 | Tc5 Analogi OUT AU Spare Analogi 5 IN |
| 11 | 12v | Nguvu ya Kuingiza |
| 12 | GND | Ardhi |
Viunganishi vya Tc vinavyotazamana na Molex-Notch
Hali iliyoongozwa na uendeshaji
| LED | Hali | Kazi |
| 1 | Nguvu | Kidhibiti Kimeanza |
| Imezimwa | Kitengo Hakuna Nguvu | |
| 2 | Kufumba/Washa | Shughuli/Muunganisho wa Canbus ni sawa CAN-unganisho au mipangilio NOK |
| Imezimwa | ||
Usanidi wa basi wa CAN
Anwani maalum ya CAN-ID (Si lazima)
Tumia kamili kwa watumiaji ambao tayari wana vifaa vingi vya CAN vilivyounganishwa; kusababisha migogoro ya vitambulisho rudufu.
Kitambulisho chaguo-msingi = 5
Chagua kitambulisho maalum kupitia madaraja ya solder S1&S2 kwenye bottm
| CAN-ID | S1 | S2 |
| 8 | wazi | imefungwa |
| 7 | imefungwa | imefungwa |
| 6 | imefungwa | wazi |
| 5 (chaguo-msingi) | wazi | wazi |
Data ndogo ya EGT CanBus:
| Kipengee | Kazi | Maelezo |
| INAWEZA Kasi | 500 Kbit | Kasi Chaguomsingi |
| CAN ID | 5/ 6 / 7 / 8 | CAN-Basi ID |
Usanidi wa Tunerstudio
EGT AU (Vipuri vya ADC) INAWEZA-Ingizo:
CAN ADC 17-20 inatumika kwa EGT 1-4:
Kitambulisho chako cha CanBus ulichochagua, Jedwali la 7 lenye kifaa cha 34
CAN ADC 21-22 inatumika kwa EGT 5-6:
CAN ADC 23-24 hutumika kwa ufuatiliaji PowerInput na toleo.
Kitambulisho chako cha CanBus ulichochagua, Jedwali la 7 lenye kifaa cha 42
6x Ingizo za CAN EGT:
Ingizo za EGT ambazo hazijatumika kama vipuri vya Ingizo za Analogi za CAN:
ONYO
USIunganishe zaidi ya 5V kwenye pini za kuingiza
ADC 23-24 INAWEZA KUTUMIA tena
Nyaraka / Rasilimali
 |
KPERFORMANCE be O2 Kidhibiti Kidogo cha EGT UNAWEZA Basi [pdf] Mwongozo wa Mtumiaji CAN-bus v1, CAN-bus v1.2, O2 Kidhibiti Kidogo cha EGT CAN Bus, O2, Kidhibiti Kidogo cha EGT CAN Bus, Kidhibiti cha EGT CAN Bus, Kidhibiti CAN Bus |
