KPERFORMANCE bE O2 Tiny EGT Controller CAN Bus User Manual
Package Contents
Tiny EGT should include the following Items:
- 1x circuit board with soldered surface mount components
- 1x MicroMolex connector
- 12x MicroMolex receptacles
- 1x 3D printed case
Electrical connections
| C1 | Function | |
| 1 | CANH | CanBus HIGH |
| 2 | Tc2 | Tc2 Analog OUT OR Spare Analog 2 IN |
| 3 | Tc4 | Tc4 Analog OUT OR Spare Analog 4 IN |
| 4 | Tc6 | Tc6 Analog OUT OR Spare Analog 6 IN |
| 5 | 5V | +5V Supply OUT |
| 6 | GND | Ground |
| 7 | CANL | CanBus LOW |
| 8 | Tc1 | Tc1 Analog OUT OR Spare Analog 1 IN |
| 9 | Tc3 | Tc3 Analog OUT OR Spare Analog 3 IN |
| 10 | Tc5 | Tc5 Analog OUT OR Spare Analog 5 IN |
| 11 | 12v | Input Power |
| 12 | GND | Ground |
Molex-Notch facing Tc connections
Operational led Status
| LED | Status | Function |
| 1 | Power | Controller Started |
| Off | Unit No Power | |
| 2 | Blinking/On | Canbus Activity/Connection OK CAN-connection or settings NOK |
| Off | ||
CAN-bus Setup
Custom CAN-ID addressing(Optional)
Use full for users who already have multiple CAN-devices connected; resulting in duplicate ID conflicts.
Default ID = 5
Select custom ID via solder bridges S1&S2 on the bottm
| CAN-ID | S1 | S2 |
| 8 | open | closed |
| 7 | closed | closed |
| 6 | closed | open |
| 5(default) | open | open |
The Tiny EGT CanBus data:
| Item | Function | Detail |
| CAN Speed | 500 Kbit | Default Speed |
| CAN ID | 5/6/7/8 | CAN-Bus ID |
Tunerstudio Setup
EGT OR (Spare ADC) CAN-Inputs:
CAN ADC 17-20 are used for EGT 1-4:
Your selected CanBus ID, Table 7 with offset 34
CAN ADC 21-22 are used for EGT 5-6:
CAN ADC 23-24 are used for monitoring PowerInput and version.
Your selected CanBus ID, Table 7 with offset 42
6x CAN EGT Inputs:
Unused EGT Inputs as spare CAN Analog Inputs:
WARNING
Do NOT connect more than 5V on input pins
CAN ADC 23-24 can NOT be re-used
Documents / Resources
 |
KPERFORMANCE bE O2 Tiny EGT Controller CAN Bus [pdf] User Manual CAN-bus v1, CAN-bus v1.2, O2 Tiny EGT Controller CAN Bus, O2, Tiny EGT Controller CAN Bus, EGT Controller CAN Bus, Controller CAN Bus |
