Matteo Chair Assembly Instructions
This document provides assembly instructions for the Matteo chair by XXXLutz KG.
Parts List
Please ensure all parts are present before beginning assembly.
| Part | Description | Quantity |
|---|---|---|
| 1 | Chair Seat/Back Unit | x1 |
| 2 | Gas Lift Column and Base Connector | x1 |
| 3 | Star Base Legs | x1 |
| A | M6x25mm Bolt | x2 |
| B | M6x18mm Bolt | x4 |
| C | M5 Allen Key | x1 |
| D | M6x18mm Bolt | x2 |
| E | Washer | x2 |
| F | M8x40mm Bolt | x1 |
| G | Base Cap | x1 |
Assembly Steps
Step 1: Attach the star base legs (3) to the gas lift column and base connector (2). Secure using two M6x18mm bolts (B) and two washers (E) for each leg, totaling four M6x18mm bolts (B) and four washers (E). Use the M5 Allen key (C) to tighten.
Step 2: Place the base cap (G) onto the top of the gas lift column and base connector (2).
Step 3: Align the chair seat/back unit (1) with the top of the gas lift column and base connector (2). Secure the seat/back unit to the base connector using two M6x25mm bolts (A) and two M6x18mm bolts (D). Tighten with the M5 Allen key (C).
Step 4: For the final connection of the seat to the base, use the M8x40mm bolt (F) to secure the central column to the underside of the chair seat. Tighten using the provided Allen key (C).
Final Check: Ensure all bolts are securely tightened. The chair has a weight capacity of 140 Kg.
Important Information
Manufacturer: XXXLutz KG
Address: Römerstraße 39 A-4600 Wels Austria
Model Number: 10780070/01/02/03 MATTEO
Weight Limit: 140 Kg [weight-scale-emoji]
Tools Required: M5 Allen Key (provided) [allen-key-emoji]
Assembly Time: Approximately 15 minutes [clock-emoji]
Assistance: Recommended to have assistance for assembly [people-emoji]
