Surmountor IR Door Hand Sensor Switch User Guide

Features: Ideal for wardrobes with three doors or sliding doors.
Function: When all three detectors detect target objects, the LED light switches on. When none of the detectors detect any target object, the LED light switches off.

Installation: Ensure all detectors are covered before powering on.

Hand Mode

Features: Suitable for applications requiring hand detection.

Function: When a hand passes over any detector within 10cm range, the LED light turns on. Passing the hand over the detector again within the range turns off the LED light.

Mounting Options

Surface Mounted: Install on the surface of the desired location

Recessed Mounted: Install in a recessed manner for a more integrated look

Frequently Asked Questions (FAQ)

Q: Can I use this sensor switch for automatic lighting control?
A: Yes, you can utilize this sensor switch for automatic lighting control based on the detection of objects or hands within the specified range.
Q: What is the power supply requirement for this product?
A: The IR Door/Hand Sensor Switch requires a power supply of 12-24V DC and accepts input of 110V/220V AC.

IR Door/Hand Sensor Switch

Door Mode

Features

1, 2 or 3 detectors in the sensor unit.
Perfect for using in wardrobes with three doors or sliding doors.

Function descriptions

When there are target objects in the detecting range of all of three detectors, the LED light switches on.
When there are no target object in the detecting range of any of the detectors, the LED light switches oﬀ.

Warning : All detectors must be covered before switching on input power.

Surface mounted

Recessed Mounted

Hand Mode

Features
1, 2 or 3 detectors in the sensor unit.

Function descriptions

When hand passes over any of the detectors within the detective range (less than 10cm), the LED light switch on.
When hand passes over any of the detectors again within the detective range (less than 10cm), the LED light switches oﬀ.

Surface mounted