Contents
hide
SuperLightingLED V5-M+RT5 RGB+CCT LED Strip Controller Kit
Product Information
- Product Name: RGB+CCT LED Strip Controller Kit
- Model No.: V5-M + RT5
Features
- 5 channels constant voltage
- Touch color wheel
- Step-less dimming
- Wireless remote with 30m distance
Features
- Mini-style controller with 5 channel constant voltage output.
- Ultra-sensitive color adjustment touch wheel.
- Smooth dimming and switch without any flickering.
- Built in 10 dynamic mode, include jump or gradual change style.
- Independent dimming function of each R, G, B, W channel to achieve millions of colors.
- 2 scene memory.
- Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
- Synchronize on multiple controllers.
- Light on/off fade time 3s selectable.
Technical Parameters
| Input and Output | |
| Input voltage | 12-24VDC |
| Input current | 15.5A |
| Output voltage | 5 x (12-24)VDC |
| Output current | 5CH,3A/CH |
| Output power | 5 x (36-72)W |
| Output type | Constant voltage |
| Dimming data | |
| Input signal | RF 2.4GHz |
| Dimming range | 0 -100% |
| Dimming curve | Logarithmic |
| PWM Frequency | 1000Hz (default) |
Warranty
| Warranty and Protection | |
| Warranty | 5 years |
| Protection | Reverse Polarity |
| LED Remote’s Input and Output | |
| Output signal | RF(2.4GHz) |
| Working voltage | 3VDC(AAAx2) |
| Working current | ＜5mA |
| Standby current | ＜10μA |
| Standby time | 2 year |
| Remote distance | 30m |
| Safety and EMC | |
| EMC standard (EMC) | ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4 |
| Safety standard(LVD) | EN 62368-1:2020+A11:2020 |
| Radio Equipment(RED) | ETSI EN 300 328 V2.2.2 |
| Certification | CE,EMC,LVD,RED |
Environment
- Operation temperature: Ta: -30 OC ~ +55 OC
- Case temperature (Max.): T c: +85OC
- IP rating: IP20
Mechanical Structures and Installations
Wiring Diagram
Remote function
- : Turn on/off light.
- : Touch to change RGB color or color temperature.
- Press RGB or CCT key to switch between RGB wheel and CCT wheel.
- : Adjust RGB or color temperature brightness, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
- : Adjust color temperature by WW/CW channel, short press 11 levels, long press adjust WW+CW brightness continuously.
: Short press get 24 kinds static RGB color.
- : Short press run next dynamic mode, long press 2s run mode-cycle.
- : For dynamic RGB mode, adjust speed, short press 10 levels, long press 2s get the default speed.
- For static RGB color, adjust saturation, namely change current static RGB color to mixed white slowly, short press 11 levels, long press 1-6s for continuous 256 levels adjustment.
- Short press get red, green or blue color directly. long press 1-6s to adjust R/G/B brightness continuously to achieve millions of colors.
- Short press turn on/off white(WW/CW), long press 1-6s to adjust white(WW+CW) brightness continuously, namely change saturation by adding white color slowly.
- Short press recall the scene, long press 2s save current color into S1/S2. the LED indicator display green when save OK.
When turn on light, the indicator display blue. when turn off light, the indicator display red.
When touch the color wheel, the indicator will display the same color.
When press or touch operation is invalid (If the light is off), the indicator display red.
To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
Light on/off fade time
- Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, the indicator light blink 3 times.
- Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s.
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match
- Short press match key, immediately press on/off key of the remote.
Delete
- Press and hold match key for 5s to delete all match,
- The light blinks 5 times means all matched remotes were deleted.
Use Power Restart
Match
- Switch off the power, then switch on power, repeat again.
- Immediately short press on/off key 3 times on the remote.
- The light blinks 3 times means match is successful.
Delete
- Switch off the power, then switch on power, repeat again.
- Immediately short press on/off key 5 times on the remote.
- The light blinks 5 times means all matched remote controls were deleted.
Application notes
All the receivers are matched with one RF remote.
- Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be extended.
- Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote, under same dynamic mode and with same speed. Receiver placement may offer up to 30m communication distance. However, we recommend for indoor applications that receiver placements should be no further apart than 15m.
Dynamic mode list
| No. | Name | No. | Name |
| 1 | RGB jump | 6 | RGB fade in and out |
| 2 | RGB smooth | 7 | Red fade in and out |
| 3 | 6 color jump | 8 | Green fade in and out |
| 4 | 6 color smooth | 9 | Blue fade in and out |
| 5 | Color temperature smooth | 10 | White fade in and out |
Dual color control
- CH4=Warm white LED
- CH5=Cool white LED
Each channel can supply up to 72W(@24V) and white balance can be controlled as such:
| Color temperature | Cool white | Neutral white | Warm white |
| Power distribution | CH4=0W,CH5=72W | CH4=72W,CH5=72W | CH4=72W,CH5=0W |
Documents / Resources
 |
SuperLightingLED V5-M+RT5 RGB+CCT LED Strip Controller Kit [pdf] Owner's Manual V5-M, RT5, V5-M RT5 RGB CCT LED Strip Controller Kit, RGB CCT LED Strip Controller Kit, LED Strip Controller Kit, Strip Controller Kit, Controller Kit |
