Owner's Manual for SuperLightingLED models including: V5-M, RT5, V5-M RT5 RGB CCT LED Strip Controller Kit, RGB CCT LED Strip Controller Kit, LED Strip Controller Kit, Strip Controller Kit, Controller Kit
RT5 V5-M 12/24V RF RGBCCT LED Strip Controller Set - superlightingled.com
RGB+CCT LED Strip Controller Kit Model No.: V5-M + RT5 5 channels constant voltage/Touch color wheel/Step-less dimming/Wireless remote 30m distance Features LVD RED Mini style controller with 5 channel constant voltage output. Ultra sensitive color adjustment touch wheel. Smooth dimming and switch without any ickering. Built in 10 dynamic mode, include jump or gradual change style. Independent dimming function of each R, G, B, W channel to achieve millions of colors. 2 scene memory. Auto-transmitting function: Controller automaticly transmit signal to another controller with 30m control distance. Synchronize on multiple number of controllers. Light on/off fade time 3s selectable. Technical Parameters Input and Output Input voltage Input current Output voltage Output current Output power Output type 12-24VDC 15.5A 5 x (12-24)VDC 5CH,3A/CH 5 x (36-72)W Constant voltage Dimming data Input signal Dimming range Dimming curve PWM Frequency RF 2.4GHz 0 -100% Logarithmic 1000Hz (default) Warranty and Protection Warranty 5 years Protection Reverse Polarity User Manual Ver 1.0.4 LED Remote's Input and Output Output signal RF(2.4GHz) Working voltage 3VDC(AAAx2) Working current 5mA Standby current 10A Standby time 2 year Remote distance 30m Safety and EMC EMC standard (EMC) Safety standard(LVD) Radio Equipment(RED) Certification ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 EN 62368-1:2020+A11:2020 ETSI EN 300 328 V2.2.2 CE,EMC,LVD,RED Environment Operation temperature Case temperature (Max.) IP rating Ta: -30 OC ~ +55 OC T c: +85OC IP20 Mechanical Structures and Installations Power input + Power input - Installation rack + DC socket input LED indicator Match key - + INPUT 12-24VDC 53.00 mm 17.50 mm 122.00 mm - + INPUT 12-24VDC Wiring Diagram + Power Adapter 12-24VDC OUTPUT W5 W4 + + OUTPUT W5 W4 + + V5-M + RT5 RGB+CCT LED Strip Controller Kit Output LED + Output Red LED Output Green LED Installation rack Output Blue LED Output Warm White LED Output Cold White LED - 114.00 mm 20.00 mm 38.00 mm RGB+CCT LED strip WW CW RGB+CCT Remote Page 1 Remote function :Turn on/off light. CCT RGB R G BW :Touch to change RGB color or color temperature. Press RGB or CCT key to switch between RGB wheel and CCT wheel. : Adjust RGB or color temperature brightness, short press 10 levels, long press 1-6s for continuous 256 levels adjustment. CCT : Adjust color temperature by WW/CW channel, short press 11 levels, long press adjust WW+CW brightness continuously. S1 S2 1 Warm White WW 100% CW 0% 6 Natural White WW 100% CW 100% 11 Cool White WW 0% CW 100% RGB : Short press get 24 kinds static RGB color. 1 R 100% 5 R 100% G 100% 9 G 100% 17 B 100% 13 G 100% B 100% 21 R 100% B 100% 25(1) R 100% : Short press run next dynamic mode, long press 2s run mode-cycle. : For dynamic RGB mode, adjust speed, short press 10 levels, long press 2s get the default speed. For static RGB color, adjust saturation, namely change current static RGB color to mixed white slowly, short press 11 levels, long press 1-6s for continuous 256 levels adjustment. R G B : Short press get red, green or blue color directly. long press 1-6s to adjust R/G/B brightness continuously to achieve millions of colors. W : Short press turn on/off white(WW/CW), long press 1-6s to adjust white(WW+CW) brightness continuously, namely change saturation by adding white color slowly. S1 S2 : Short press recall the scene, long press 2s save current color into S1/S2. the LED indicator display green when save OK. * When turn on light, the indicator display blue. when turn off light, the indicator display red. * When touch the color wheel, the indicator will display the same color. * When press or touch operation is invalid (If the light is off), the indicator display red. * To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state. Light on/off fade time Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, the indicator light blink 3 times. Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s. User Manual Ver 1.0.4 Match Remote Control (two match ways) V5-M + RT5 RGB+CCT LED Strip Controller Kit End user can choose the suitable match/delete ways. Two options are offered for selection: Use the controller's Match key Use Power Restart Match: Short press match key, immediately press on/off key of the remote. Delete: Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted. Match: Switch off the power, then switch on power, repeat again. Immediately short press on/off key 3 times on the remote. The light blinks 3 times means match is successful. Delete: .Switch off the power, then switch on power, repeat again. Immediately short press on/off key 5 times on the remote. The light blinks 5 times means all matched remote controls were deleted. Application notes All the receivers are matched with one RF remote. 30m 30m 30m RF remote Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be extended. Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote, under same dynamic mode and with same speed. Receiver placement may offer up to 30m communication distance. However, we recommend for indoor applications that receiver placements should be no further apart than15m. Dynamic mode list No. Name 1 RGB jump 2 RGB smooth 3 6 color jump 4 6 color smooth 5 Color temperature smooth No. Name 6 RGB fade in and out 7 Red fade in and out 8 Green fade in and out 9 Blue fade in and out 10 White fade in and out Dual color control CH4=Warm white LED CH5=Cool white LED Each channel can supply up to 72W(@24V) and white balance can be controlled as such: Color temperature Power distribution Cool white CH4=0W,CH5=72W Neutral white CH4=72W,CH5=72W Warm white CH4=72W,CH5=0W Page 2Corel PDF Engine Version 16.1.0.843 CorelDRAW X6