Sunricher SR-2833T2 RF Single Color Wall Mounted Controller
Important: Read All Instructions Prior to Installation
Function introduction
Front side
Back side
Product Data
- Touch-sensitive
- Glass interface(white & black)
- Compatible with all universal series RF receivers, radio frequency: 868/869.5/434MHz
- Control single color
- Control 4 zone of RF receiver synchronously and separately
- Backlighting for finding in the dark
- Waterproof grade: Ip20
Safety & Warnings
- DO NOT install with power applied to device.
- DO NOT expose the device to moisture.
Wiring diagram
Pair with RF receiver
- Step 1:Do wiring the wall panel & RF receiver according to the wiring diagram (please refer to the instructions of RF receiver that you would like to pair with)
- Step 2:Click the “Learning Key” button on RF receiver or re-power on the receiver three times continuously to set it into pairing status.
- Step 3:Choose one zone and touch
the button of the zone(e.g. zone 4), LED lights connected with the RF receiver flicker once means the receiver is paired with zone 4 successfully.
Installation
Documents / Resources
 |
Sunricher SR-2833T2 RF Single Color Wall Mounted Controller [pdf] User Guide SR-2833T2, 09.283T2.04213, SR-2833T2 RF Single Color Wall Mounted Controller, SR-2833T2, RF Single Color Wall Mounted Controller, Color Wall Mounted Controller, Wall Mounted Controller, Controller |
