Tech4u T29 Wireless Controller User Manual

Turn on your P4 console.
Connect the controller using a Micro-USB cable.
Press the ‘Home’ button on the controller and select a
pamaké.
When the light bar flashes white and then stays in blue or
other colors, you can remove the cable and use the controller
sacara nirkabel.

Nyambungkeun ka Alat PC:

Gamepad tiasa disambungkeun kana alat PC ku dua cara:

Sambungan kabel: Nyambung ka komputer kalawan
kabel USB.
Sambungan Bluetooth: Dina modeu pareum, pencét
buttons SHARE and HOME to enter Bluetooth pairing mode. Milarian pikeun
Bluetooth devices on the computer, click ‘Wireless Controller’ in
the Available Devices list to connect.

Sleep State and Reconnection:

If the controller fails to connect with the console for over 30
seconds, it will enter sleep state.
In the connected state, if there is no button operation for
about 10 minutes and the Left/Right Stick does not move greatly,
the handle enters sleep state.
To reconnect, press the ‘HOME’ button to turn on the
controller; it will automatically reconnect to the P4/P5
sistem.

Ngeusi batre:

The controller battery charges when connected to your P4/P5
console with a USB cable (console must be turned on or in rest
mode).
The charge level appears on-screen when you press and hold the
PS button. While in rest mode, the light bar blinks orange. When
charging is complete, the light bar turns off.
It takes approximately 3 hours to charge the controller when
the battery has no remaining charges.

Patarosan anu Sering Ditaroskeun (FAQ):

Q: How do I pair the controller with my P4 console?

A: Turn on your P4 console, connect the controller using a
Micro-USB cable, press the ‘Home’ button on the controller, and
follow on-screen instructions to select a user.

Q: How can I check the battery level of the controller?

A: Press and hold the PS button to display the battery level
on-screen. The light bar also indicates charging status.

“`

View Fullscreen

Wireless Controller pikeun P4
1′-vv > — —
Manual pamaké
Wireless Controller pikeun P4
1′-vv y
Manual pamaké

T his product is a P4 controller, which belongs to wireless Bluetooth controller (using wireless Bluetooth technology). It Built-in TURBO and Key mapping function , It can remotely contoller,wh,ch is easy to operate. It can be used f or P4 console, P4 Pro and P4 Slim.It compatible with Smartphone and PC gamessuch asD-input and X-input{PC360) are also supported.

When you use the controller for the first time, you need to connect it with the P4 console: Turn on your P4 console, connect the contrailus,ng a M,cro-USB cable, and then press the’Home’button on the controller, select a user.When the controller is connecting to the console,the light bar flashes in white oolor and then s1ay in Blue o other colors channel lights, you can emove the cable and use the controller wirelessly.

‘”‘”
L1y

.,..,

c-,d Lft ,u,,
., y
F(2Fol
Voltage:DC 5V Working Current: <60mA Sleep Current: OuA Battery Capacity: 800mAh Usage time: About 10 hours Weight: 251g

AOr
.,,,, “”’
ll Fly IF,I

When you use the controller for 1he first time, you need to connect it with the PS console: Tum on your P5 console, connect the controller using a Typ-C USB cable, and then press the’Home’button on the controller, select a user.When the controller is connecting to the consothe tight bar flashes in white color and then stay in blue or other colors channel tights, you can remove the cable and use the controllewirelessty.

Bluetooth 4.2 TransmissionDistance: < 10m Vibration Current: 1 OmA Charging Current: About 450mA
Charging time: About 3 hours STANDYBY: 30Days Dimensions: 16.0 x 11.0 x 6.5 cm

N OTED: The controller just can be use to play the P4 game in P5 console. Then use this controller to play the P5 game in P5 console that system Would Prompt you to change other controller.

71P4y bluetooth TURBO7″r(/)(/)- r-LI. P4. P4PRO. P4SUM tttrè<. d-inpu x-input(PC360)(l)PClf1,,1… 7y l!.1tcLI

I:::I(/){r· USB·-rræP4L.,rL., HomL., LED::,Il.,rå 1L., I::.. USB-rI::. r u::,

Ll,. >
D-pod <>,, ”

ARE LED OPTIONS

“‘>
AOr . , <.,.

R2>

F2>
(Fn) DC 5V <60mA , OuA TI: 8 0 0mAh 1 2 H 2512g

“> (Fe)
Bluetooth ( 4.2 ) <lOm lSOmA 45 0mA 3H 30 4 16.0 x 11.0 x 6.5cm

T 1g(l)f;t

Typ-C USB-rPSL,L,Home,::,L,I::

LED>rrç<l)L, kL,

us O

LLLL Un- –

(J)::i:.,Cl-PS-1.,. “t'(J)IJ.P 4’7′-J… (J)::i:., – “t’P 5J.,.”t’P 5,. L,-{!}J.,.f tJ)y “L

–
Bluetooth connection:ln the off mode, first press button “S HARE” and”HOME”, the gamepad enters Bluetooth pairing mode when the light is flashing quickly, search the Bluetooth devices on the Smartphone 1.iOS Bluetooth Connection: Open the Bluetooth on the iOS devices -> Search the
Bluetooth devices,in the “AvailableDevices” list, click”DUALSHOCK 4 Wireless Controlle’ to connect. LED lightkeepsonwhenthebluetoothis connected. 2. Android Bluetooth Connection: Open the Bluetooth on the Android devices -> Search the Bluetooth devices,in the “AvailableDevices” list,Click ” Wireless Controller ” to connect. LED lightkeepsonwhenthebluetoothis connected

The gamepad can be connected to PC devices in two ways 1. Wired connection: Connect to the computer with a USB cable . 2. Bluetooth connection:ln the off mode, firdt press button”S HARE” and ” HOME”,
the gamepad enters Bluetooth pairing mode when the light is flashing quickly, search the Bluelooth devices on the computer, and click the”AvailableDevices” l1srWireless Controller”to connect. LED light keeps on when the bluetooth is connected

If the Controller fails to connect with console over 30 seconds in seah sla it will enter sleep state. In the connected state, there is no button operation for about 10 minutes, and the
Left/Right Stick does not move greaUy, and the handle enterd the sleep state;
Press the’HOME’button to tum on your controller, it will reconnect to P4/P5 system automatically.
1.Press the’HOME’button to tum on the controller.
2.Turn off the controller, press the PS button until the lightbaturned off or log out of the P4 /P5 system.
3.When the controller is in re-connecting status, ii will be turned off if it failed to connect over 60 seconds
1 The controller battery charges when you connect the controller to your P4/P5 console with a USB cable.The console must be turned on or in rest mode
The charge level of the battery appears on-screen when you press and hold the PS button. While the system is in rest mode. the light bar slowly blinks orange. When charging ,s complete, the light bar tums off 2.11 takes approximately 3 hours to charge the controller when the battery
has no remaining charges.
To activate the tubo hold turbo and press the button you want to assign it to, then let go of turbo, now when you hold the button it will act as if you were repeatedly pressing the button. Generally, a turbo button will switch a button on and off really quickly.Like if you assign turbo to A, it’d have the effect of pressing the button really quickly if you just hold it down. Clear or stops turbo setting: hold ‘turbo’ key and press the button that you want to clea. The turbo function is available for the fire buttons{x,o,o ,.6., Ll,L2,Rl,R2)

Bluetooth7″SHARE””HOME”li’LIt Bluetooth

IJ:., ,=,)IJ) LED,:L1=. ,,_7:.,

1.iOS.B,_luetoBoluthe tooth,O/S(,(“I J)Bluetoo.t”DUALSHO CK 4Wirele,sControlle””

‘)”L”t”:.,L LED41L

2.Android BluetoothAndroid 1<-{IJ)Bfuetooth

“j. “t’Bluetooth ,J”L::,:.,

L4ile L,ED”Wifrele1ssControlL ler· Ii’

yI’/1;1:2-,IJ
lUSB1,-c:::i::, l,

2. Bluetooth7’SHARE'”HOME”l,e,::, Bluetooth

7I1;H::,l,U ‘Wirele11s)sCo.ntrLoEllDer”‘(‘(l,-CL:::J/

::, l,

LEOl,,,

1. Bluetooth PC 7:::i:, 2..J.Bluetoolhl,/!

t:tl.>71-7

3.l,;, UDXL

L :., 131 P41=9 E 71;:.,L-t= 1 01:., < 3D(;I:[Iv 0 ) 1.’HOME LIf::
} 17LED-:,:.,71;1: t,:.,;JUJO
-:,(YL 1LED :.,71 PS-8-1UL LED4i 71!
1L ;,,?-(‘>I.,,y 2 ,:,;,, 71L ;,,1< PS;,,L
P4,,-L, 3,:,;,, L, 1 600
6l;I:7 9
1.:::,:, /::p4/p5;,’j u,b ‘.:,’..)l,f::,/)U 7 f<IJ f..,f;tps::,>n ::,1..,::,s; f;:111)::,<I’.) 714 C-l,
2.3’IJ

y 7lil: O (x, O,D,6,l1,L2,R1,R2)1Turbo (X,O,D,t,,,l1,L.2,R1,R2) >L,Turbo> Tuo
IL,L,
TURBOO (x,o,o ,”‘ ,L1,L2,R1,R2) L,Turbo TURBO

·Mapping setting: 1. Press & hold the ‘TURBO·key until the light bar flashes to activate the mapping setting. 2.Press the button which you want to assign to 3.Press the’Fn’key to save setting.4.The Fn will replace the button(The one you designated)
, Clear mapping:Press and hold the TURBO until the lightbar fashes to tum off the mapping setting, Fn keys are back to default setting(F1=L3,F2=R3)
, Cancel programming:Press and hold the Option+Turbo until the lighter flashes and stays on.It stops the mappiing setting.Press Option+ Turbo key combination once
moe,it reactivate programming setting to be default mode.
· Mappable button: The following buttons can be mappable: A,0X(Up), (Down), (Left),(Right),L3,R3, L1,R1,L2,R2
If your controller won’t pair, won’t respond, or is displaying a flashin light, You’ll need to reset the controller. To do that just use a small toot and push the reset button.
I f I The reset button is In the hole Where The back of the controller. Theck of controller

Controllerx1

Kabel USB Tipe-C x1

USE R GUIDE x1

,-:1c’:- 1 Lt ,,-1=:,’7{7’1::L. · 2.),tc,, y 3.fnJ l., 4 . Fnl:, {O(1))
“”}): :,7′”P 1 ‘”7L Fn 7 { Fl=L3 F2=R3 ) I::
7’} 4 Tl..IHoption· LIt ‘”}l., Option+ TurboL 7′:,7 I-<7′ L
,,7′:-: A,0 X L3 R3 Ll, R2 R2rnt,,7’

:::i::, D 7S,:, Ut. :::i::,1-IJL,

tJ’Y-clJy::,. ::i::,0-

> -5

1””‘- …

:::,::., xl

Tipe-C1

(] xl

(S) Do not use this product near the fire source; (S) Do not put the product in a damp or dusty environment, (S) Do not be exposed to direct sunlight or high temperature; (S) Do not use chemicals such as gasoline or thinner, (S) Do not hit the product or make it fall off due to strong impact, (S) Do not bend or pull the cable components strongly; (S) Do not disassemble, repair or refit.

Power off/Charge/Low BatteryAlarm/Reset

S Pcwercff

Dasc,iption To tum onntrb11e,,pss and the HOME button5S until the lndlcato,s llghtoff When thf’! contrbller is inconnectingtus, it will be turnf’!d off if it failed to connectr 30 seconds

Cho,ge

When the controller;, connecting with the console, It will enter Into sleep mode wnen there is no operation over S minutes When chargiin the por-off, the LED indicators flashes;When thebattis full, The LED indicators tum off; Wheach”g;n the powe,-oa, the LEO;ndfla,When thebariecy ;,full, the LED indicators stblue.

Low BarierAla,m

wnen the LED indic:01’$ continuesflah.it wilI l’Ulr out of poon, and needs to be charg

Pernyataan Patuh FCC Alat ieu saluyu sareng Bagian 15 Aturan FCC. Operasi tunduk kana dua kaayaan di handap ieu: (1) alat ieu moal ngabalukarkeun gangguan anu ngabahayakeun, sareng (2) alat ieu kedah nampi gangguan anu ditampi, kalebet gangguan anu tiasa nyababkeun operasi anu teu dipikahoyong. Awas: Parobahan atanapi modifikasi anu henteu disatujuan sacara dinyatakeun ku pihak anu tanggung jawab pikeun patuh tiasa ngabatalkeun wewenang pangguna pikeun ngoperasikeun alat. Catetan: Alat ieu geus diuji sarta kapanggih sasuai jeung wates pikeun alat digital Kelas B, nurutkeun Bagian 15 tina Aturan FCC. Watesan ieu dirarancang pikeun nyayogikeun panyalindungan anu wajar tina gangguan anu ngabahayakeun dina pamasangan padumukan. Alat ieu ngahasilkeun, ngagunakeun sareng tiasa mancarkeun énergi frekuensi radio sareng, upami henteu dipasang sareng dianggo saluyu sareng petunjuk, tiasa nyababkeun gangguan anu ngabahayakeun kana komunikasi radio. Nanging, teu aya jaminan yén gangguan moal lumangsung dina pamasangan khusus. Upami alat-alat ieu nyababkeun gangguan anu ngabahayakeun kana panarimaan radio atanapi televisi, anu tiasa ditangtukeun ku cara mareuman sareng ngaktipkeun alat, pangguna didorong pikeun ngusahakeun ngabenerkeun gangguan ku salah sahiji atanapi langkung tina ukuran ieu: - Reorient atanapi mindahkeun anteneu anu nampi. - Ningkatkeun separation antara alat jeung panarima. - Sambungkeun alat-alat kana stop kontak dina sirkuit béda ti nu disambungkeun ka panarima. - Taroskeun ka dealer atanapi teknisi radio/TV anu berpengalaman pikeun pitulung.

OO<TL,tJ.,,; OIJCI.),1:CC; OP O’.l’)::…f>’o-::…-tJ. OL,L,’ OIL,IJ UT< OIJIN-:, IJL,,\,; OL,Tc.lJ L,IJ, L,tclJL,l;t.,,;
A0)IO)j{lj(al, CgL, A0)L, R.:’.”

/ b./1)y

-b.

:::i:, o-;.,7 –;JICl, }5

y o -I:.}0-.1,)’l, U L3 Iy’)D- ” U -,. ;en,:. LU

ft ·?al t·TIt

7 ::,7 L
::,

fll ?l-.llTt:,71::,7U

“LILED1QJU:.,7 <‘IC

Dokumén / Sumberdaya

Tech4u T29 Wireless Controller [pdf] Manual pamaké
T29, T29 Wireless Controller, Wireless Controller, Controller

Rujukan

Manual pamaké

Tech4u T29 Wireless Controller User Manual

T29 Wireless Controller

Émbaran produk

spésifikasi:

Parentah Pamakéan Produk:

Connecting to P4 Console: