legrand Y4652M2 Basic Control BUS 2 Modules
Katerangan
Two-module flush mounted control, capable of handling functions up to: 4 ON/ OFF lights and dimmer, 2 shutter up/down and advanced features such as 4 scenario activations and VDE floor call functions, staircase light switch-on and lock activation.
To be completed with 1 or 2-module covers.
In case of management of groups of lights, this device support the return state (please check the production date starting from 26W17).
Hareupeun view
data teknis
| Catu daya tina SCS BUS: | 18 – 27 Vdc |
| nyerep: | 6 mA (stand-by) 7 mA (max) |
| Suhu operasi: | 0 – 40 °C |
Hareupeun view without protective shell
Data diménsi
| A | B | C | D |
| 45 mm | 45 mm | 16.7 mm | 6.9 mm |
Katerangan
- Cangkang pelindung
- Bewara status LED
Y4652M2:
Blue steady = load ON
White steady = load OFF
Blue flashing = object not configured
MX5222/MX5222C:
Purple steady = load ON
Blue steady = load OFF
Purple flashing = object not configured - Kadali kenop
- LED pushbutton (*)
Tukangeun view
Katerangan
- BUS clamp
- Kasalametan jeung sealing cap jelas
Awas: do not delete - Configurator socket:
A1 = area 1
PL1 = light point 1
M1 = mode 1
A2 = area 2
PL2 = light point 2
M2 = mode 2
Daptar fungsi
The device create the following functions:
- Kadali cahaya
- Kontrol otomatis
- Plus programmed scenario activation
- Video door entry controls
- Commands only available with virtual configuration
Konfigurasi
For device configuration and installation and for any other information, refer to the App or documentation that can be downloaded from the on-line catalogue of the device.
|
Unduh Aplikasi |
|
|
Imah + Kontrol |
Home + Project |
The apps can be downloaded from their respective stores.
It is recommended to update the smartphone or tablet operating systems to the latest available version.
In addition, PHYSICAL CONFIGURATION will continue to be guaranteed by inserting the configurators in the appropriate housings (*).
The configuration using Home + Project has the advantage of offering many more options when compared with the physical configuration.
For the list of modes and the corresponding meanings refer to the indications of this technical sheet and the Home + Project app.
(*) Physical configuration
Kadali cahaya
Alamat
| Address type | Configurators | |
| Titik-ka-titik | Kamar | A1, A2=1-9 |
| Light point | PL1, PL2=1-9 | |
| Kamar | A1, A2=AMB, PL1, PL2=1-9 | |
| Grup | A1, A2=GR, PL1, PL2=1-9 | |
| Umum | A1, A2=GEN, PL1, PL2=0 | |
Modus
ON / OFF kontrol
Here is the data extracted from the image:
| Fungsi | Parameter / setting | Configurators | |||
| Siklik | M1, M2=0 | ||||
| ON | M1, M2=ON | ||||
| Pareum | M1, M2=OFF | ||||
| Tombol | M1, M2=PUL | ||||
| Timed ON* | 0,5 detik | M=8 | |||
| 30 detik | M=7 | ||||
| 1 mnt | M=1 | ||||
| 2 mnt | M=2 | ||||
ON/OFF control and ADJUSTMENT (Point-to-Point only):
| Fungsi | Configurators |
|
Cyclical ON/OFF and ADJUSTMENT. |
M1, M2=0 |
| ON with upper button, OFF with lower button and DIMMER when held down | M1, M2=0/I |
Kontrol otomatis
Alamat
| Address type | Configurators | |
| Titik-ka-titik | Kamar | A1, A2=1-9 |
| Light point | PL1, PL2=1-9 | |
| Kamar | A1, A2=AMB, PL1, PL2=1-9 | |
| Grup | A1, A2=GR, PL1, PL2=1-9 | |
| Umum | A1, A2=GEN, PL1, PL2=0 | |
Modus
| Fungsi | Configurators |
| Bistable control | M1, M2=↑↓ |
| Monostable control | M1, M2= ↑↓ M |
| Monostable when pressing briefly and bistable when holding down | M1, M2=6 |
fungsi Éntri panto video
Door lock release control
Alamat
| Addressing type | Configurators |
| Entrance panel address | A=1-9 PL=1-9 1) |
Catetan 1): Set the P address (two digits) of the entrance panel from which to control the door lock using the bottom left module.
The bottom right module controls the door lock of entrance panel P+1 se A2=PL2=M2=0.
Type of function
| Fungsi | Configurators |
| Door lock release control | M1, M2=3 |
Floor call control
Alamat
Define the address (two digits) of the internal unit to be called using the control device.
| Addressing type | Configurators |
| Internal unit address | A=1-9 PL=1-9 |
| Umum | A=GEN A/PL=0 |
Type of function:
| Fungsi | Configurators |
| Floor call control | M=4 |
Staircase lights control
Alamat
The device takes on the function of push button for switching on the lights of the internal unit identified by its own address (two digits).
| Addressing type | Configurators |
| Internal unit address | A=1-9 PL=1-9 |
Type of function:
| Fungsi | Configurators |
| Staircase lights control | M=5 |
Rojongan Palanggan
Dokumén / Sumberdaya
 | Y4652M2 Basic Control BUS 2 Modules |
Rujukan
- legrand.comwww.bticino.comwww.legrand.comwww.bticino.com
- Manual pamakémanual.tools