Itron ACT2 Meter Module User Guide

Pamasangan profésional
modul ieu dimaksudkeun pikeun instalasi profésional ku integrator nu. Integrator OEM masih tanggung jawab sarat minuhan FCC produk ahir, nu integrates modul ieu.

Modifikasi sarta Perbaikan
To ensure FCC compliance and system performance, this device, antenna and/or coaxial assembly shall not be changed or modified without the express written approval of Itron. Any unauthorized modification will void the user’s authority to operate the equipment. WARNING! This device contains no user serviceable parts. Attempts to repair this device by unauthorized personnel may subject the person to shock hazard if removal of protective covers is attempted. Unauthorized repair will void the warranty and/or maintenance contract with your company.

Katerangan Umum
The Itron ACT2 is an electricity metering module which includes a 902.4 MHz to 927.6 MHz transmitter as well as WiFi.
The module operates on AC as well as DC voltage nu disadiakeun ku alat host.

Ngeunaan Manual ieu
This technical reference guide describes the installation of the ACT2 for the Itron OPENWAY RIVA CENTRON meter.

Pamasangan

The ACT2 module will be installed in the Itron OPENWAY RIVA CENTRON electric meter.
Shown are the meter base with metrology board, the board to board connector, the ACT2 module, the display and the inner and outer cover.

Pasang tampilan dina modul ACT2 ku ngadorong pin logam tina tampilan kana konektor modul.

Selapkeun modul kana bagian luhur panutup jero tur sambungkeun dua konektor kabel ka modul.

Sambungkeun metrologi sareng modul ACT2 nganggo papan pikeun konektor dewan.

Pasang panutup jero handap.

Pasang panutup luar.

Émbaran daur ulang

Produk anu anjeun mésér ngandung papan sirkuit. Dina ahir modul hirup mangpaat, dina sagala rupa hukum kaayaan sarta lokal, éta bisa jadi ilegal mun dispose komponén tangtu kana sistem runtah kota. Pariksa ku pajabat runtah padet lokal Anjeun pikeun detil ngeunaan pilihan daur ulang atawa pembuangan ditangtoskeun.

Labeling

The following requirements will be applied to any products that use this module:
The end product or host label will include the following text:

ngandung:

ID FCC: SK9ACT2
IC: 864G-ACT2, modél: ACT2

Buku manual pikeun produk naon waé anu ngandung modul ieu bakal ngandung téks di handap ieu. Upami alatna cukup ageung, maka ieu ogé bakal disimpen dina labél.

Pamatuhan pangaturan

Manual pamaké pikeun produk naon waé anu ngandung modul ieu bakal ngandung téks ieu:

FCC Bagéan 15, Kelas B
Alat ieu geus diuji sarta kapanggih matuh ka wates pikeun alat digital Kelas B, nurutkeun Bagian 15 Aturan FCC. Watesan ieu dirarancang pikeun nyayogikeun panyalindungan anu wajar tina gangguan anu ngabahayakeun dina pamasangan padumukan. Alat ieu ngahasilkeun panggunaan sareng tiasa mancarkeun énergi frekuensi radio sareng, upami henteu dipasang sareng dianggo saluyu sareng petunjuk, tiasa nyababkeun gangguan anu ngabahayakeun kana komunikasi radio. Nanging, teu aya jaminan yén gangguan moal lumangsung dina pamasangan khusus. Upami alat ieu nyababkeun gangguan anu ngabahayakeun kana panarimaan radio atanapi televisi, anu tiasa dipastikeun ku cara mareuman sareng ngaktipkeun alat, pangguna didorong pikeun nyobian ngabenerkeun gangguan ku salah sahiji atanapi langkung tina ukuran ieu:

Reorient atawa mindahkeun anteneu panarima.
Ningkatkeun separation antara alat jeung panarima.
Sambungkeun alat-alat kana stop kontak dina sirkuit béda ti nu disambungkeun ka panarima.
Taroskeun ka dealer atanapi teknisi radio/TV anu berpengalaman pikeun pitulung.

Parobahan atawa modifikasi alat ieu teu dinyatakeun disatujuan ku Itron, Inc. bisa batal wewenang pamaké pikeun beroperasi alat.

Inovasi, Élmu sareng Pangembangan Ékonomi Kanada (ISED)

Aparatur digital Kelas B ieu nyumponan sadayana sarat tina Peraturan Peralatan Campuran Kanada. Operasi tunduk kana dua kaayaan ieu:

Alat ieu moal ngabalukarkeun gangguan anu ngabahayakeun, sareng
Alat ieu kedah nampi sagala gangguan anu katampi, kalebet gangguan anu tiasa nyababkeun operasi anu teu dipikahoyong.

Under Innovation, Science and Economic Development Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Innovation, Science and Economic Development Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

Paparan RF (FCC/ISED)
“This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.”

Riwayat révisi

Tabel di handap ieu ngajelaskeun perobahan kana dokumén ieu pikeun tiap révisi modul méter ACT2:

Révisi	titimangsa	Katerangan ngeunaan Robah
A	Juni, 2018	Kaluaran Awal

FAQ

What should I do if I encounter interference issues with the ACT2 Meter Module?

If interference occurs, ensure that the antenna type and gain are approved for use by regulatory authorities. Adjust the settings to minimize interference with other devices.

Can I modify or repair the ACT2 Meter Module myself?

The module is intended for professional installation by an integrator. Modifications or repairs not approved by Itron, Inc. may void the user's authority to operate the equipment.

Dokumén / Sumberdaya

Itron ACT2 Meter Module [pdf] Pituduh pamaké
SK9ACT2, ACT2, ACT2 Meter Module, Meter Module, Module

Rujukan

Manual pamaké

Itron ACT2 Meter Module

spésifikasi

Rupa-rupa