Generic Motorcycle Side Panel
spésifikasi
| Spésifikasi | Rincian |
|---|---|
| Model kasaluyuan | Kawasaki Z900/Z900 SE |
| Bahan | Serat Karbon |
| Parabot Instalasi | Screwdriver, Soft Cloth, Plastic Pry Tool |
Usage Instructions & Restrictions
Léngkah-léngkah Instalasi
ngaran: FOR Kawasaki Z900/Z900 SE Motorcycle Side Frame Trim Panel Engine Body Guard Cover
- Persiapan: Gather the new frame side panels, original mounting screws, a soft cloth, and a screwdriver.
- Remove Stock Panels: Gently detach the original side panels using the screwdriver, and keep the screws safely.
- Clean & Align: Wipe the frame’s mounting area clean with the cloth. Align the new panels with the original holes and mounting points.
- Pamasangan Aman: Fasten the panels with the saved screws, tightening them evenly (avoid overtightening).
- Cék ahir: Confirm the panels are firmly fixed, flush with the frame, and free of gaps or looseness.
Correct Usage & Restrictions
- Clean regularly with a soft cloth and water; avoid corrosive cleaners or sharp objects.
- Do not modify panel size/shape; do not remove or loosen during riding.
- Do not use if cracked, deformed, discolored, or loosely fixed.
- For civilian motorcycles only; match the side body structure of your motorcycle.
- Check firmness regularly, especially after riding on bumpy roads or minor impacts.
Warning / Safety Information
- Install only compatible, intact side panel parts.
- Ensure motorcycle stability during installation; use a plastic pry tool to avoid scratching.
- Ensure no interference with vehicle components; check firmness before riding.
- Comply with local EU traffic regulations for motorcycle modifications; user bears penalties for non-compliance.
Applicable EU Regulations & Harmonized Standards
This motorcycle side panel complies with the following EU regulations and harmonized standards, meeting EU road safety and quality requirements for civilian motorcycles (excluding police, military, and racing models):
- Regulation (EU) 2018/858 (Jul 1, 2020): Ensures no interference with vehicle parts and sufficient stability to prevent falling off.
- EN 13595-2:2021 (Jun 15, 2021): Requires adequate structural strength, impact resistance, and compatibility with motorcycle side body.
- EN ISO 3833:2019 (Feb 20, 2019): Clarifies applicability and compatibility with applicable motorcycle models.
FAQs
Can I use these panels on a different motorcycle model?
No, these panels are specifically designed for the Kawasaki Z900/Z900 SE models.
What should I do if the panels become loose?
Check the screws and ensure they are tightened properly. If the issue persists, consult a professional.
Are there any cleaning restrictions?
Yes, clean only with a soft cloth and water. Avoid using corrosive cleaners or sharp objects.
Dokumén / Sumberdaya
 |
Generic Motorcycle Side Panel [pdf] Pituduh instalasi Sb50271bf67ce4fd6b3bfef8836900400d, Motorcycle Side Panel, Side Panel, Panel |