EPLO E16 Remote Control

spésifikasi

• Pamasangan kadali jauh
• Pamasangan batré
• Rear/Front cleaning operation
• Drying/Dryer temperature
• Pangaturan volume cai
• Nyemprot posisi nozel penyesuaian
• Hemat énergi
• Pangaturan suhu cai
• Pangaturan suhu korsi
• Cahaya peuting
• Full flush/Half flush
• adjustment volume siram tank cai
• Operasi séjén

Persiapan instalasi

1. Bor liang diaméterna 6 mm dina témbok ka jero ngeunaan 35 mm.
2. Copot stiker napel dua sisi dina tonggong gantungan.
3. Install the expansion pipe into the wall hole and align it with the hanger hole.
4. Attach the double-sided adhesive sticker on the back of the hanger to the wall, lock the screw, and tear off the double-sided adhesive sticker on the back of the patch and stick it on.

Pamasangan batré

1. Pasang batré anyar kana kadali jauh sareng tutup panutup batré.
2. Nempatkeun kadali jauh dina gantungan.

Parentah Pamakéan

Rear/Front Cleaning Operation

• For rear/front cleaning operation, follow the instructions on the remote control to activate and adjust as needed.

Drying/Dryer Temperature Adjustment

• Adjust the dryer temperature by selecting the desired level on the remote control. The indicator light will display the current air temperature range. It will stop drying automatically after a cycle or after the user leaves the seat.

BUBUKA

• Hatur nuhun pikeun milih produk kami. Punten baca pitunjukna saksama sateuacan dipasang sareng jaga supados sayogi pikeun pangropéa atanapi rujuk ka payun.

Persiapan instalasi

Pamasangan kadali jauh

Remote control hanger installation 1

1. Bor liang diaméterna 6 mm dina témbok ka jero ngeunaan 35 mm.
2. Copot stiker napel dua sisi dina tonggong gantungan.
3. Pasang pipa ékspansi kana liang témbok, teras sajajarkeun sareng liang gantungan. Pasangkeun stiker perekat dua sisi di tukang gantungan kana témbok, koncikeun sekrupna, teras copot stiker perekat dua sisi di tukang tambalan teras tempelkeun.

Remote control hanger installation 2

1. Beresih sareng usap garing daérah anu tos dipasang dina gantungan kadali jauh dina témbok.
2. Copot stiker napel dua sisi dina tonggong gantungan.
3. Lengket kana témbok sacara vertikal, cobek stiker napel dua sisi dina tonggong patch sareng lengket.

Pamasangan batré:

1. Pasang batré anyar kana kadali jauh sareng tutup panutup batré.
2. Nempatkeun kadali jauh dina gantungan.

bewara:

1. When determining the installation position, it is necessary to ensure that the remote control can be reached by hand when the person is sitting on the seat.
2. It is forbidden to install and use the product in the bathroom and other wet places. And do not put it in a place where it is easy to be drenched by water.

Pamasangan kadali jauh

Parentah Pamakéan

bewara:

• The body should touch the seat, and the buzzer rings “CLICK”, which means the functions of front cleaning, rear cleaning, and drying are in operation.
• Please stay backward when sitting on the seat. So that the cleansing position can be easily aligned, and there will be no splash.
• The nozzle will continue to spray for 1-2 seconds after the user stands up during spray operation, so please press the “STOP” button before standing up.

BEUREU|MÉDAH

• Pencét "” button, the indicator light is on showing the current water temperature level, it starts rear washing; Press again “” button to shift to moving washing (nozzle moves forward and backward to expand washing area).
• The washing will last for a circle and stop automatically, while it will stop immediately if the user presses “"tombol.

Hareupna|NGGERAK

• Pencét "” button, the indicator light is on, showing the current water temperature level. It starts front washing; Press again “” button to shift to moving washing (nozzle moves forward and backward to expand washing area).
• The washing will last for a circle and stop automatically, while it will stop immediately if the user presses “"tombol.

Fungsi pulsa flushing

• This function only applies to product with pulse cleaning mode.
• During front/rear cleaning, long press “"atawa""Tombol pikeun ngaktipkeun / mareuman mode beberesih pulsa.

KERING|SUHU PENGERING

(Ngan lumaku pikeun nerapkeun kalayan fungsi drying)

1. Pencét "", lampu indikator bakal hurung, nunjukkeun rentang suhu hawa ayeuna. Éta bakal eureun garing sacara otomatis saatos hiji siklus atanapi saatos awak manusa ninggalkeun korsi.
2. Dina prosés pangeringan, pencét tombol ""Tombol pikeun nyaluyukeun suhu hawa, sareng lampu indikator bakal hurung pikeun nampilkeun kisaran suhu angin.
   • When the indicator light is not on, it is 0 degrees (normal temperature range), and the range adjustment mode is 0-5 degrees in turn.

Pangaturan volume cai

• Press the “+” or “- ” button when it is under the function of rear washing or front washing, the indicator light will be on, showing the current water volume level. Adjust the water volume by 3 levels.

Nyemprot posisi nozel penyesuaian

Press “∧” or “∨” button when it is under the function of rear washing or front washing, the indicator light will be on, showing the current nozzle position. Adjust the nozzle position by 5 levels.

Hemat énergi

• Pencét panjang""Tombol pikeun asup kana mode hemat energi, pencét panjang"Tombol deui pikeun kaluar tina mode hemat energi.

Hemat énergi

• Under energy saving mode, the seat temperature is low(level 1) to achieve energy saving.
• Catetan: If the seat temperature before energy saving is neutral, keep the neutral after energy saving

Nyarios

• Energy saving mode will be suspended and go to function mode if someone uses the seat in the middle of energy saving mode.
• The seat starts to heat immediately (without closing the seat temperature), and the energy saving mode is restored after the human body leaves the seat.

Pangaturan suhu cai

• Pencét "” button to adjust the water temperature. The indicator will show the water temperature level if it’s on.
• When the indicator is off, the water level is 0. Press this button to adjust the water temperature level from 0 to 5 in a cycle.

Pangaturan suhu korsi

• Pencét "” button to adjust the seat temperature. The indicator will show the seat temperature level if it’s on. When the indicator is off, the seat level is 0. Press this button to adjust sthe eat temperature level from 0 to 5 in a cycle.

Cahaya peuting

• Only for a toilet with a night light function
• adjustment lampu wengi: Pencét lila button to turn on/off the night light.
• Modeu pinter: Pencét lila button to enter intelligent mode ( Night light will be on or off by detecting the lightness of surroundings).
• If the product is in intelligent mode, long press “"Tombol pikeun kaluar tina modeu calakan. (Setélan standar pabrik lampu wengi nyaéta modeu calakan)

Satengah siram / siram pinuh

Only for the toilet with auto flush function

• Pencét pondok “ ” kancing, jamban mimiti satengah siram.
• Pencét pondok “” kancing, jamban mimiti pinuh ku siram.
• Pencét lila “” button to turn on/off the auto flush function
• When the auto flush function is turned on, the toilet will automatically flush after detecting the user leaving the seat.

adjustment volume siram tank cai

• Only for toilets with water tank flush volume adjustment function
• Pencét jeung tahan "tombol ", sarta pencét volume cai" + "tombol pikeun ngasupkeun volume siram pinuh ditambah 1 adjustment gear;
• Pencét jeung tahan "” button, and press the water volume ” – ” button to enter the full flush volume, reduce 1 gear adjustment;
• Pencét jeung tahan "tombol ", sarta pencét volume cai" + "tombol pikeun ngasupkeun volume satengah siram tambah 1 adjustment gear;
• Pencét jeung tahan ""tombol, sarta pencét volume cai" - "tombol pikeun ngasupkeun satengah volume siram ngurangan 1 adjustment gear.

Operasi séjén

Kodeu pangguna

kadali jauh frékuénsi radio

1. Unplug to cut off the power supply to the toilet
2. Pencét heula"tombol ", teras pencét""Tombol, lampu indikator bakal hurung.
3. Plug in the toilet and press the “reset” button.
4. The indicator stops flashing and is on for 2s, which means the remote control and the toilet are matched successfully. The self-inspection of the main unit is finished when it beeps once. Then the remote control is ready for use.

IR kadali jauh

1. Nyolok kana wc. Éta bakal ngalaksanakeun pamariksaan diri. Nalika réngsé, bip sakali.
2. Pencét heula"tombol ", teras pencét""tombol; lampu indikator bakal hurung.
3. Press the Pressure ” + ” or ” – ” button to select user 1-9 (as shown in the figure below). The indicator light displays the corresponding user code and flashes.
4. Pencét "tombol ", teras pencét"” button. The main unit beeps once, which means the remote control and the toilet are matched successfully.

Deodorisasi otomatis

• Pencét jeung tahan ""tombol sareng pencét" ” button to turn on/off the auto deodorization function.
• While the auto deodorization function is on, when it’s detected that the user is seated, it’ll start deodorizing and stops when user leaves. When warm air is working on, deodorization function is off.
• (This function only applies to product with auto deodorization function. This function is set to on by default.)

Modeu sepi

• Pencét jeung tahan ""Tombol sareng pencét""Tombol pikeun ngaktipkeun / mareuman mode sepi.

Fungsi sterilisasi

• Nalika pangguna henteu calik sareng ngumbah/ngagaringkeun pareum, pencét panjang "” button to turn on plasma sterilization function.This function will stop automatically after 2 hours. During this mode, if any other button is pressed or user is seated, it’ll stop automatically. (This function only applies to product with sterilization function.)

Tombol pre-wetting otomatis

• Press and hold the ” ” button and press the ” ” button to turn on or off the automatic pre-wetting function.
• After the automatic pre-wetting function is turned on, the pre-wetting function is performed when the user is detected to be seated. (This button combination is only for toilets with automatic pre-wetting function.)

Saklar rasa suku

• Pencét panjang"” button to turn the foot sense function on or off.In the seated status, foot sense function is invalid. (This function only applies to product with foot sense function.)

Lampu indikator sensitipitas suku

• Pencét"” button first, and then press “” button to turn on/off the foot-sensing indicator light.
• This combination button only applies to the toilet with the foot-sensing indicator.

Kode APP cocog

• Tahan tombol ""jeung"” simultaneously to start APP code matching. (This button combination only applies to product with APP)

Flush by the water tank with an electronic cover

• Tahan tombol ""jeung" ” simultaneously to start the flush by water tank with electronic cover. (This button combination is only for the toilets with flush by water tank with electronic cover.)

Tips:

• Buzzer bakal disada "BIP" nalika pangguna mencét hiji tombol anu hartosna unit utama nampi sinyal sareng ngalaksanakeun operasi saluyu sareng éta. Upami buzzer henteu disada, éta hartosna unit utama henteu nampi sinyal, mangga saluyukeun arah kadali jauh sareng pencét tombolna.
• In case of power cut during nozzle spray operation, the nozzle cannot go back to place,please wait until the power is reset. In case of a power cut for a long period, please push the nozzle softly back by hand.
• Ulah nyorong teuas, pikeun nyegah karuksakan mun nozzle jeung mesin listrik.
• Gambar produk tiasa henteu sapinuhna konsisten sareng penampilan sareng warna anu saleresna kusabab perbaikan produk, punten anu langkung saé.

FAQ

How do I adjust the water volume?

To adjust the water volume, use the corresponding controls on the remote control to increase or decrease the flow as needed.

How do I activate energy saver mode?

To activate energy saver mode, long-press the designated button on the remote control. Press the same button again to exit energy saver mode.

Dokumén / Sumberdaya

EPLO E16 Remote Control [pdf] Instruksi Manual E16BP, E16 Remote Control, E16, Remote Control, Remote

Rujukan

• Manual pamaké