ENTTEC 73539 DIN PIXIE

Émbaran produk

spésifikasi:

• Panungtun Nyiptakeun Protokol Adat
• Compatible with ENTTEC pixel controllers: DIN PIXIE, PIXELATOR MINI, PIXELATOR MINI MK2, OCTO MK2, OCTO MK3
• Firmware Version Requirements: V1.0 or above for some models, V2.0 or above for others, V4.0 or above for OCTO MK2

Parentah Pamakéan Produk

bubuka:
ENTTEC Pixel controllers support over 20 default pixel protocols. The custom protocol feature allows users to create a custom protocol for pixel fixtures not covered by default protocols without the need for new firmware.

Syarat Setup:

• Datasheet of the desired pixel fixture
• Computer to access the device settings page
• For ENTTEC Ethernet Controller: Device IP address (DHCP or static)
• For DIN PIXIE: EMU Software for configuration

Guide to Custom Protocol Creation:

1. Verify datasheet for compatible pixel protocol
2. Navigate to the Device’s User Interface to enablethe  custom protocol feature
3. Adjustthe  pixel fixture’s data voltage timing viathe  web interface based othe n datasheet

Step 1: Verify Datasheet for Compatible Protocol

1. Check the data transmission method from the datasheet
2. Identify data transmission method (e.g., D1-D2-D3…Dn or C1-C2-D1-D2…Dn)
3. Choose a supported protocol with a similar data transmission method

Firmware cocog

Nyiptakeun protokol khusus dipidangkeun dina pangendali piksel ENTTEC ieu:

SKU	produk	Vérsi firmware
73539	DIN PIXIE	V2.0 atanapi saluhureuna
70067	PIXELATOR MINI	V2.0 atanapi saluhureuna
70068	PIXELATOR MINI MK2	V1.0 atanapi saluhureuna
71521	OCTO MK2	V4.0 atanapi saluhureuna
71522	OCTO MK3	V1.0 atanapi saluhureuna

BUBUKA

• ENTTEC Pixel controllers support more than 20 pixel protocols by default. In the event of missing protocol, this custom feature allows users to create a custom protocol for the desired pixel fixture anytime without having to submit a support request for new firmware.
• Fitur ieu ngamungkinkeun pamaké pikeun nyaluyukeun voltagwaktos dumasar kana protokol anu dirojong upami metode pangiriman data cocog sareng salah sahiji protokol anu dirojong kami.
• Dokumén ieu nyayogikeun pitunjuk pangaturan pikeun nyiptakeun protokol piksel khusus sareng pariksa kriteria.

SYARAT SETUP

Di handap ieu diperlukeun pikeun nyieun protokol custom:

1. Lembar data: Obtain the datasheet of the desired pixel fixture to gather necessary information. Contact the dealer or manufacturer for this document.
2. Alat: Use a computer to access the device settings page.
3. For the TEC Ethernet Controller: Obtain the device IP address, which can be either DHCP or static, based on your network settings. Discover the IP using the ENTTEC EMU app.
4. For DIN PIXIE: Use the EMU Software for configuration.

Pituduh Pikeun Nyiptakeun Protokol Adat

Fitur ieu ngamungkinkeun pamaké pikeun nyaluyukeun data voltage timing to meet specific protocol needs. To create a custom protocol:

1. Pariksa lembar data pikeun protokol piksel anu cocog.
2. Arahkeun ka Antarmuka Pamaké Alat pikeun ngaktipkeun fitur protokol khusus.
3. Saluyukeun vol data fixture pikseltage timing via éta web panganteur sakumaha per datasheet produsén urang.

Lengkah 1: Verifikasi lembar data pikeun protokol anu cocog

1. Pariksa metode pangiriman data tina protokol anu dipikahoyong tina lembar data.
   1. The data transmission method implies how the data is forwarded. Below are demonstrated the common data transmission methods:
      • Metoda nu paling umum ngirimkeun data tanpa bit tambahan (misalna, D1-D2-D3…Dn).
        Example: Émbaran direbut tina datasheet WB2812B urang

        

      • Sababaraha protokol, sapertos TM1814, kalebet data tambahan di payun (contona, C1-C2-D1-D2…Dn).
        Example: Émbaran direbut tina datasheet TM1814 urang

        
2. Nyalonkeun protokol anu cocog anu dirojong ku alat (atanapi pilih tina conto di luhurample) that shares the same data transmission method as your desired pixel protocol.
3. Teraskeun kana Lengkah 2 pikeun konfigurasi salajengna.

Step 2: Navigate to the Device’s Settings page to enable the custom protocol feature
In this step, the OCTO/PIXELATOR MINI Series and Din PIXIE are guided accordingly due to their distinct interfaces.
For ENTTEC Ethernet Controllers (OCTO/PIXELATOR MINI Series)

1. Access to the OCTO/PIXELATOR MINI web panganteur
   1. Google Chrome disarankeun salaku web browser to access the OCTO/PIXELATOR MINI’s web panganteur.
   2. Free ENTTEC app, EMU can be used to discover OCTO/PIXELATOR MINI’s IP address. See the ENTTEC websitus www.enttec.com pikeun ngundeur aplikasi.
   3. After entering the IP address of OCTO/PIXELATOR MINI, the user will land on the Home page of OCTO/PIXELATOR MINI’s User Interface.

      
      Example of the OCTO homepage in Figure 1 indicates IP address 10.10.3.31, which was assigned by the DHCP server. For the out-of-box OCTO/PIXELATOR MINI that is connected directly to a computer (no DHCP server), the default IP address is 192.168.0.10.
      See OCTO/PIXELATOR MINI User Manual ‘Networking’ section for more information.
2. Navigate to the Settings page – Output Setting.
   Pindah ka kaluaran dimana fixture piksel anu dipikahoyong disambungkeun. Pilih protokol piksel tina daptar dropdown anu ngabagi metode pangiriman anu sami anu diverifikasi dina Lengkah 1.

   

3. Enable Custom protocol (Continue to Step 3)
   Aktipkeun kotak centang 'Custom' pikeun ngakses data voltage setelan timing. Pupus centang pikeun nganonaktipkeun protokol khusus.

   

Pikeun DIN PIXIE

1. Sambungkeun DIN PIXIE ka komputer nganggo USB Type-B.
2. Ngajalankeun Software EMU.
3. Nyeken alat teras klik dina Conf tina kapanggih DIN PIXIE.

   

4. Enable Custom Protocol (Continue to Step 3)
   Pick a pixel protocol from the dropdown list that shares the same transmission method verified in tp,1, and enable Custom.

   

Lengkah 3: Setel vol customtage waktos

1. Cocog jeung voltage timing dina datasheet tina protokol nu Anjeun hoyongkeun. Custom Protocol merlukeun 4 inputs pikeun ngalengkepan data voltage adjustment waktos:
   

   Voltage Timing Definition
   Bit 0 High Time (T0H)	Voltage waktos tinggi diperlukeun pikeun kode 0.
   Bit 1 High Time (T1H)	Voltage waktos tinggi diperlukeun pikeun kode 1.
   Overall Bit Time:	Jumlahna voltage time for a single bit. Lower limit = T0H+T0L Upper limit = T1H+T1L
   Reset Waktos	Jumlahna voltage waktos low diperlukeun pikeun ngareset pangiriman data antara unggal bets data.

   

2. Lembar Data - Data voltage info waktos Example
   Tina datasheet WB2818B
   • Locate the ‘Sequence Time’ table in WB2818B’s datasheet for the voltage rentang waktu.
   • Eusian voltage rentang waktu dina widang custom di Setélan Kaluaran.

     

PENTING

• ENTTEC recommends taking the median value of the range for the start.
• Pamaké kedah SAVE setélan supados nilai anu dirobih tiasa dianggo.
• Fine adjustment of value required, followed by actual output test to optimise custom protocol for pixel fixture control.
• ENTTEC recommends a trial run on the actual setup before finalising the custom protocol setup.
• Typical issues of incorrect setup include, including and not limited to, failure to light up and output flickering.

PANUTUP

• Pituduh ieu nunjukkeun kumaha cara nyetél protokol khusus pikeun alat ENTTEC anu layak sareng masihan pangaweruh téknis ngeunaan pariksa lembar data tina fixtures piksel anu dipikahoyong.
• Ku nuturkeun léngkah-léngkah ieu, pangguna tiasa nyiptakeun protokol piksel khusus anu henteu kapendak dina daptar turun-handap tanpa ngantosan dukungan téknis atanapi sékrési firmware énggal. Upami anjeun gaduh patarosan atanapi sesah milarian inpormasi anu leres, hubungi tim dukungan anu ramah di kantor lokal.

FAQ

How do I access the device settings page on my computer?

You can access the device settings page by connecting your computer to the device's network and entering the IP address in a web browser.

Can I create a custom protocol without the datasheet?

It is recommended to have the datasheet to ensure accurate customization of the protocol based on the pixel fixture's specifications.

Dokumén / Sumberdaya

ENTTEC 73539 DIN PIXIE [pdf] Instruksi Manual DIN PIXIE, PIXELATOR MINI, PIXELATOR MINI MK2, OCTO MK2, OCTO MK3, 73539 DIN PIXIE, 73539, DIN PIXIE, PIXIE

Rujukan

• Manual pamaké