User manuals, setup guides, and instructions for Tria Beauty laser hair removal devices and Tria Technologies embedded development kits.
The Tria brand category covers two distinct but innovative lines of products.
Tria Beauty is a pioneer in light-based skincare, best known for its at-home laser hair removal devices like the FDA-cleared Tria Laser 4X. Using clinical-grade diode laser technology, Tria Beauty enables users to achieve long-lasting hair removal safely and privately.
Tria Téhnologi (a trademark of Avnet, Inc.) designs and manufactures cutting-edge computing modules, systems-on-module (SOMs), and development boards. Their extensive lineup—including the K24, AUBoard-15P, and ZUBoard 1CG—empowers engineers to test, prototype, and build complex applications involving AI, machine learning, and embedded processing.
manual panganyarna ti manuals+ curated pikeun merek ieu.
Patarosan umum ngeunaan manual, pendaptaran, sareng dukungan pikeun merek ieu.
No. The Tria Laser 4X deactivates the hair follicle by targeting the dark pigment (melanin) inside the hair. It is intended for use only on naturally brown or black hair and will not work on white, grey, blonde, or red hair.
The Tria 4X is intended for use only on light to medium skin tones. It has a built-in skin sensor that will not unlock the device if it detects a skin tone that is too dark and unsafe for treatment.
For best results, it is recommended to treat the desired area every two weeks for up to 3 months, or until you are satisfied with the amount of hair reduction.
Development kits generally include the primary board (such as the AUBoard-15P or ZUBoard), a power supply, a quick-start card, and occasionally mounting hardware like standoffs and heatsinks depending on the module.
You will need to prepare a microSD card with a compatible BSP image (like PetaLinux) using an imaging tool. Then, insert the card into the board's SD slot and configure the boot mode switches (e.g., SW1) to the designated SD card boot setting before applying power.