BSEED W-SD Multi Function Power Meter
fungsi konci
Bubuka produk
The multi – functional Wlfl guide rail meter adopts a rail – type design, which is small in size, compact instructure and simple in installation; it uses an LCD display screen to display current, voltage, electricity, power,frequency and other electrical parameters, is convenient for users to acquire data and easy to operate. It hasgood anti – electromagnetic interference capabilities, meets various needs of power management, facilitates therealizationof terminal – intelligent power metering, and facilitates the retrofitting of power meters in the lateltransformation of the lighting system. It is widely used in commercial squares, science and technology parksuniversities and other occasions where billing is required, It can also be jointly deployed with energyconsumption monitoring and energy management systems. its application scope includes property bilingmanagement, electricity metering, power demand – side management, energy management andenergy-saving analysis, Other low – voltage power systems, etc.
Parameter téknis
| Dipeunteun voltage | AC 220V/110v |
| Operasi voltage rentang | AC 80V-300V |
| Frékuénsi | 50/60Hz |
| rentang kakuatan | 0-99999kwh |
| Rentang waktu | 0-999 poé |
| Faktor kakuatan | 0-1.0PF |
| Rentang suhu | -40-150°C |
| Overvoltage rentang setelan | 130-300V |
| Undervoltage rentang setelan | 75-21v |
| Overcurrent setting range | 1-63A |
| Overpower setting range | 1-15KW |
| Dipeunteun insulasi voltage | 400V |
| Kontak kaluaran | 1NO |
| Kahirupan mékanis | 10,000 kali |
| Kelas panyalindungan | lp30 |
| Luhurna | ::,2000m |
| Kalembaban | 550%at40°C(non-condensing) |
Function Introduction, Default Settings
| Pilihan | Setélan rentang | Parameter standar |
| Overvoltage
panyalindungan |
230-300V | 270V |
| Undervoltage
panyalindungan |
110-21v | 170V |
| Arus leuwih
panyalindungan |
0.1-63A | 40A |
| Overloadprotection | 1-15KW | 8. 8KW |
| Énergi listrik
panyalindungan |
0-99999kwh | 99999kwh |
| Overtemperature
panyalindungan |
0-150°( | 85°C |
| Number of closures | 1-30 kali | 5 kali |
| Closingtime | 1-600 detik | 30 detik |
| Electricityclearing | Hurung/Pareuman | peureum |
| Timing clearing | Hurung/Pareuman | peureum |
| Power-up operation | Close/open/hold | ngajaga |
| Overvoltagedelay
panyalindungan |
1-600 sec/off | peureum |
| Undervoltagedelay
panyalindungan |
1-600 sec/off | peureum |
| Overcurrent delay
panyalindungan |
1-600 sec/off | peureum |
| Overloaddelay
panyalindungan |
1-600 sec/off | peureum |
| Overtemperature
delayprotection |
1-600 sec/off | peureum |
structural analysis
DIMENSI
Ukuran produk
Diagram wiring
Set function operation
Press the set key for 5 seconds to enter the settings page, give an example of the “Overvoltage Protection” setting, click the
key cursor to move to the “Overvoltage Protection” position, press the set key to select, press the
key to adjust to the required value, press the set to save after the adjustment is completed, and press the key to select other settings. If you do not need to set it, press the
key to move the cursor to the exit position, and then press set to return to the home page. The other settings can be the same as the “Overvoltage Protection” setting method.
Set function operation
Unduh Smart Life APP 
or Graffiti APP Smart Connection
WIFI connection or reset operation method: Long press the wifi key 5-10s wifi indicator light will flash, turn on the phone Bluetooth, then open the Smart Life APP, click “+” in the upper right corner, select “Add Device”, wait for the device to scan out the device, click on the device to select the wifi name, enter the password to wait for the device to be added successfully.
INFORMASI LEUWIH
Dokumén / Sumberdaya
 |
BSEED W-SD Multi Function Power Meter [pdf] Instruksi Manual wifi_1p_din_rail, W-SD Multi Function Power Meter, W-SD, Multi Function Power Meter, Function Power Meter, Power Meter, Meter |