behringer BMX Sampling Drum Machine User Manual

Behringer BMX Sampling Drum Mesin

spésifikasi

• Ngaran produk: BMX Classic Hybrid Drum Machine
• Fitur: 121 Authentic Drum Sounds, Real-Time Sequencer with Step Editor, Wave Designer, Dual-Mode Filter
• Vérsi: 1.0

Parentah Pamakéan Produk

Parentah Kasalametan
Mangga baca tur turutan parentah kaamanan ieu taliti:

• Ulah nyabut panutup luhur atawa bagian tukang pikeun nyegah shock listrik.
• Ulah ngalaan alat ka hujan atawa Uap pikeun nyegah seuneu atawa shock listrik.
• Only qualified service personnel should perform any servicing beyond the operation instructions.
• Hindarkeun dengekeun dina tingkat polumeu luhur pikeun période anu panjang pikeun nyegah karusakan dédéngéan.
• Follow all instructions provided in the manual for safe usage.

Pedoman Pamakéan produk

1. Hindarkeun ngagunakeun aparat caket cai sareng bersihkeun ngan ku lawon garing.
2. Ensure proper ventilation by not blocking openings and installing according to the manufacturer’s instructions.
3. Avoid placing the apparatus near heat sources or naked flames.
4. Ulah ngarobah colokan jeung make ngan dianjurkeun kantétan jeung asesoris.
5. Protect the power cord from damage and unplug during storms or long periods of non-use.

Rekomendasi tambahan

• Use caution when moving the apparatus on carts to prevent tip-over injuries.
• Use only specified carts, stands, tripods, brackets, or tables recommended by the manufacturer.

Loading PDF…

−+Fit width100%View FullscreenDownload PDFPrint PDF

×

Loading PDF…

Manual pamaké
BMX
Classic Hybrid Drum Machine with 121 Authentic Drum Sounds, Real-Time Sequencer with Step Editor, Wave Designer and Dual-Mode Filter
V 1.0

Parentah Kasalametan

Mangga baca parentah kaamanan ieu taliti tur nengetan sagala simbol peringatan dipintonkeun dina produk jeung informasi kaamanan patali maranéhanana dina parentah ieu.
Terminal anu ditandaan ku simbol ieu mawa arus listrik kalayan gedena anu cekap pikeun janten résiko kejutan listrik. Anggo ukur kabel spéker profesional anu nganggo kualitas ¼ ”TS atanapi colokan colokan-pasang sateuacana dipasang. Sadaya pamasangan atanapi modifikasi sanésna kedah dilakukeun ngan ukur ku tanaga mumpuni. Simbol ieu, dimana waé némbonganna, ngingetkeun anjeun kana ayana vol bahaya anu teu kaisolasitage jero dipager voltage nu bisa jadi cukup pikeun mangrupakeun resiko shock. simbol ieu, dimana wae eta némbongan, ngabejaan Anjeun tentang operasi sarta perawatan parentah penting. Mangga baca manual lengkep.
Awas Pikeun ngurangan résiko shock listrik, ulah nyabut panutup luhur (atawa bagian pungkur). Taya bagian serviceable pamaké jero. Rujuk ngalayanan ka tanaga anu mumpuni.
Awas Pikeun ngurangan résiko kahuruan atawa kejutan listrik, ulah nepikeun alat ieu ka hujan jeung beueus. Aparatur henteu kedah kakeunaan cairan anu netes atanapi cipratan sareng henteu aya barang anu dieusian ku cairan, sapertos vas, anu kedah disimpen dina alat.
Awas Parentah jasa ieu kanggo dianggo ku tanaga jasa anu mumpuni wungkul. Pikeun ngirangan résiko kasetrum listrik, ulah laksanakeun ngalayanan salian ti anu aya dina petunjuk operasi. Perbaikan kedah dilakukeun ku tanaga jasa anu mumpuni. Perhatosan Mangga tingal inpo dina exterior of handap dipager pikeun informasi listrik jeung kaamanan saméméh masang atawa beroperasi alat.
Awas Pikeun nyegah kamungkinan karuksakan dédéngéan, ulah ngadangukeun dina tingkat polumeu luhur pikeun période lila. Salaku pituduh pikeun nyetel tingkat polumeu, pariksa yen Anjeun masih bisa ngadéngé sora sorangan, lamun nyarita normal bari ngadengekeun make headphone.
1. Baca jeung jaga parentah ieu. Heed sagala warnings tur turutan sagala parentah.
2. Ulah make aparat ieu deukeut cai (lamun lumaku). Beresih ngan ku lawon garing.

3. Ulah meungpeuk bukaan ventilasi (lamun lumaku). Ulah dipasang dina spasi dipasrahkeun. Pasang ukur nurutkeun parentah produsén urang.

4. Ulah dipasang deukeut sagala sumber panas kayaning radiators, registers panas, kompor atawa alat sejenna (kaasup ampliifiers) anu ngahasilkeun panas. Ulah nempatkeun sumber seuneu taranjang, kayaning lilin lighted, dina aparat.

5. Ulah ngelehkeun tujuan kaamanan tina colokan polarized atanapi grounding-tipe. Colokan polarisasi gaduh dua bilah sareng hiji langkung lega tibatan anu sanés (ngan pikeun AS sareng Kanada). A colokan grounding-tipe boga dua wilah sarta prong grounding katilu. Agul lega atawa prong katilu disadiakeun pikeun kaamanan Anjeun. Upami colokan anu disayogikeun henteu pas kana stop kontak anjeun, konsultasi ka tukang listrik pikeun ngagantian stop kontak anu tos lami.

6. (Lamun lumaku) Nangtayungan ari kakuatan tina keur leumpang dina atawa pinched utamana salaku colokan, receptacles genah, sarta titik dimana aranjeunna kaluar tina aparat.

7. Paké ngan kantétan jeung asesoris dianjurkeun ku produsén.

8.

Anggo ngan ukur karanjang anu khusus,

stand, tripod, kurung,

atawa tabel dieusian ku

produsén, atawa dijual

kalawan aparat

(lamun lumaku). Nalika a

karanjang dipaké, make caution nalika mindahkeun éta

gorobag / kombinasi aparatur pikeun nyegah tatu

ti tip-over.

9. Cabut colokan nalika badai, atanapi upami henteu dianggo kanggo waktos anu lami.

10. Ngarujuk sadayana ngalayanan ka tanaga jasa anu mumpuni. Diperlukeun ngalayanan nalika aparatur ruksak ku cara naon waé, sapertos kabel catu daya atanapi colokan rusak, cairan tumpah atanapi barang murag kana aparatur, aparatur parantos kakeunaan hujan atanapi lembab, henteu beroperasi normal. , atawa geus turun.

11. (Upami tiasa dianggo) Aparatur sareng terminal grounding pelindung kedah dihubungkeun ka stop kontak MAINS kalayan sambungan grounding pelindung.

12. (Upami tiasa dianggo) Di mana colokan MAINS atanapi gandeng alat dianggo salaku alat pegatkeun sambungan, alat pegatkeun sambungan kedah tetep tiasa dianggo.

13. internal / éksternal Voltage Selectors (lamun lumaku): vol internal atawa éksternaltage saklar pamilih, lamun aya, ngan kudu reset na ulang dilengkepan colokan ditangtoskeun atanapi vol alternatiftage ku teknisi jasa mumpuni. Entong nyobian ngarobih ieu nyalira.

14. Kelas II Wiring (lamun lumaku): Pikeun ngurangan résiko shock listrik, sambungan kabel éksternal disambungkeun ka terminal kalawan "Kelas II Wiring" merlukeun Kelas II wiring dipasang ku hiji jalma maréntahkeun atawa pamakéan siap-dijieun ngawujud atanapi cords.

15. Rentang suhu operasi 5° nepi ka 45° C (41° nepi ka 113° F).

DISCLAIMER HUKUM
Inpormasi anu aya dina Pituduh Mimiti Gancang ieu sareng manual anu disayogikeun ngan ukur pikeun pituduh umum. Bari unggal usaha geus dilakukeun pikeun mastikeun katepatan jeung reliabilitas eusi dina waktu ieu publikasi, Music Suku Global Brands Ltd. ("Musik Suku") ngajadikeun euweuh ngagambarkeun atawa jaminan, express atanapi tersirat, sakumaha ka completeness, akurasi, atanapi suitability tina informasi, déskripsi, ilustrasi, atawa spésifikasi teknis dieu.
Music Tribe henteu nanggung tanggung jawab pikeun leungitna langsung, henteu langsung, saliwatan, atanapi konsékuansi atanapi karusakan anu timbul tina ngandelkeun inpormasi anu aya dina dokumén ieu, kalebet tapi henteu dugi ka leungitna data, panghasilan, kauntungan, atanapi kasempetan bisnis. Pamakéan produk tetep tanggung jawab pamaké.
Fitur produk, desain, spésifikasi, sareng répréséntasi visual tiasa diénggalan atanapi dirobih tanpa aya bewara sateuacanna pikeun kapentingan perbaikan produk anu terus-terusan.
Sadaya merek dagang pihak katilu anu dirujuk dina pituduh ieu mangrupikeun hak milik anu gaduhna. Midas, Klark Téknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones, sarta Coolaudio mangrupakeun mérek dagang atawa mérek dagang kadaptar ti Music Tribe Global Brands Ltd.
© 2025 Music Tribe Global Brands Ltd Sadaya hak ditangtayungan. Euweuh bagian tina dokumén ieu bisa dihasilkeun, dikirimkeun, atawa dipaké dina formulir naon atawa ku cara naon baé tanpa idin tinulis saméméhna ti Music Tribe.

HARANSI kawates

Pikeun istilah, kaayaan, sareng watesan anu lumaku pikeun produk anjeun, kalebet sinyalna, pangaluaran, sareng durasi garansi kawates, mangga tingal Kabijakan Jaminan Terbatas Music Tribe lengkep, sayogi online di: community.musictribe.com/support
Punten mertahankeun bukti pameseran anjeun, sabab tiasa diperyogikeun pikeun jasa garansi.

BAGIAN MODE

33 – SONG
This button is used to enter song mode; and to select a song for saving, copying,
erasing or dumping.
34 – PATTERN
This button is used to enter pattern mode; and to select a pattern for saving,
copying, erasing or dumping.
35 – STEP
This button is used to enter step mode, where patterns can be created
in step time.
36 – PADS
This button is used to enter pads mode, where patterns can be created in
eal time using the voice pads (5) or an external MIDI device such as an
electronic drumkit.
See the PROGRAMMING section below for more detail on how these buttons
dipaké.
44 – MENU
This button is used to enter the main menu options.
Use the data control, or buttons 39 and 40 to scroll through the options, and
button 42 or Yes button (45) to access each sub-menu. Use the No button (43) to
exit a sub-menu.
Ukuran Lengkah
Use this option to set the step size. The setting depends on whether Step Size
has been set to pattern, song or global in the Preferences sub-menu (see below).
Available options are 1/8bnote, 1/8 triplet, 1/16 note (default), 1/16 triplet or 1/32 note.
Kamungkinan
If the probability range has been set to anything other than 100% using the tap
button and tempo control as described above then the probability sub-menu
can be used on a drum-by-drum basis to select the steps on which Probability is
active. A rate of 100% means that a selected drum programmed on a selected
step will always sound, a setting of 50% means that it will only sound half the
time, and 0% means that it will never sound. This allows a degree of variance
to be introduced to your patterns without having to program it in. The Options
sub-menu allows probability to be set on a pattern, song or global level. Use the
pads (5) to select the required drum.
Flam
As with probability the amount of flam is set using the tap button and tempo
control, and its level of use is set in preferences. The flam sub-menu allows it to
be selected on a drum-by-drum, step-by-step basis. Use the pads (5) to select
the required drum.
Catetan Ngulang
Note repeat is set on a pattern basis only and can be set on any step for any drum.
The available values are Off (default), 1, 2, 4 or 8. Use the pads (5) to select the
required drum.
Polimétri
Polymeter, as opposed to polyrhythm, works by having different step numbers
for different drums within a pattern. So, for example, in a sixteen step pattern
if the bass drum is set to 16 steps then it will repeat with the pattern, whereas
if the hi hat is set to 7 steps then its pattern will play twice followed by the first
two steps before the pattern repeats. It is a concept that is worth exploring to
discover the possibilities.
In the sub-menu polymeter can be switched on using the >> (forward) button
(56) or off with the << (back) button (53), then the step length for any drum can
be set using the navigation and data controls. The default step length is sixteen.
As with other parameters the preferences sub-menu allows polymeter to be set
on a pattern, song or global basis.
Nyaring
The filter sub-menu allows a filter cutoff value, in the range 0 – 255, with a
default of 127, to be set for each step in a pattern. As with the other parameters
the filter can be set to be on the basis of individual patterns, songs or global.
The filter cutoff can also be recorded into a pattern by putting the pattern
into step record with the filter switched on and turning the cutoff control (see
ANALOG FILTER and RECORDING below).
Use the forward button (56) to switch the filter on or the back button (53) to
switch it off. Alternatively use the filter On button (10)
Karesep
Sub-menu preferensi ngamungkinkeun setelan pikeun sababaraha parameter:
• Tempo (pattern (default), song, global)
• Swing (pattern (default), song, global)
• Probability (pattern (default), song, global)
• Flam (pattern (default), song, global)
• Filter HPF (pattern, song, global (default))
• Filter On (pattern, song, global (default))
• Filter Auto (pattern (default), song, global)
• Polymeter (pattern (default), song global)
• Step Size (pattern (default), song, global)
• Metronome (pattern (default), song, global)
• Auto Scroll (pattern, song, global (default))
• FX Bus (pattern, song, global (default))
• Mute (pattern, song, global (default))
• Solo (pattern, song, global (default))
• Bank (pattern (default), song, global)

PROGRAM & PLAYBACK BAGIAN

46 – RECORD
This button is used to put the BMX into record mode. Press play (48) to start
recording. See PROGRAMMING below.
47 – STOP
This button is used to stop recording or playback. The current pattern or song
will revert to its first step.
48 – PLAY/PAUSE
This button is used to start playing back a pattern or song. A second press will
pause playback; a third will resume from the point at which it was paused.
49 – LENGTH
The length menu is used to set the length of the currently selected pattern,
up to the maximum value of 64 steps. The default, as shown, is sixteen steps.
To set the pattern length to another value use the sixteen step/pad buttons
in conjunction with the forward (56) and back (53) buttons. For values under
sixteen steps press the step/pad button with the required number on it.
All buttons associated with steps above this value will flash.
For values above sixteen steps use the forward button to move to one of the
upper blocks, which will be indicated on the display, then press the button with
the required number. The number of steps is displayed in the top right hand
corner of the display.
The value can also be set using the data control (38), by pressing the control then
dialing in a number.
Autoscroll allows the playhead to move between blocks of steps when playing or
programming, so that the current block is represented on the step/pad buttons.
When length is selected the copy button will flash. Pressing copy copies the
current step block. To paste use the << and >> buttons to move to a different
block, then press save to complete the process.

Maké SYNTHTRIBE

Sakur .wav file under 682 Kb in size, can be loaded into SynthTribe and downloaded
onto the BMX. SynthTribe will convert stereo samples to mono and adjust the
sample rate to 24 kHz. The BMX’s native format is 12 bit, 24 kHz mono.
The files can be sent singly, or as a multiple send, will download into the first
empty slot(s) of the currently selected bank. SynthTribe also includes a Librarian
function which allows samples pikeun dicadangkeun tur dibalikeun individual.
The files can be sent singly, or as a multiple send, will download into the first
empty slot(s) of the currently selected bank.
The total storage available for user samples, whether made direct to the BMX or
downloaded from SynthTribe is 14.45 Mb; which equates to 315.70 seconds
(5.30 minutes) of sampwaktos na.
Punten dicatet yén sample rate conversion is currently not supported for
32 bit samples.
SAMPLE MANAJEMEN
To manage the BMX’s sample memory press and hold the tap button and then
press the samptombol na. Ieu muka sampmenu na. Kabéh samples di
memory are listed. Note that the default samples found in banks 1 to 7 are
locked (padlock symbol is shown beside the sample name) and c
annot be deleted.