1. Produk Langkungview
The VEVOR CJ18A 7"x14" Mini Metal Lathe is a precision benchtop machine designed for a variety of metalworking tasks, including turning, drilling, and threading. Equipped with a powerful 550W motor and durable metal gears, this lathe offers reliable performance for small to medium-sized projects. Its user-friendly design includes a digital display for spindle speed, an emergency stop switch, and an automatic power-off protection cover for enhanced safety and convenience.
2. Parentah Kasalametan
Always prioritize safety when operating the mini metal lathe. Failure to follow these instructions may result in serious injury or damage to the equipment.
- Baca jeung ngarti sakabéh manual saméméh operasi.
- Anggo alat pelindung pribadi (PPE), kalebet kacamata kaamanan, panyalindungan dédéngéan, sareng sarung tangan.
- Pastikeun wewengkon gawé beresih, cahayana alus, sarta bebas tina halangan.
- Never wear loose clothing, jewelry, or long hair that could get caught in moving parts.
- Salawasna pegatkeun sambungan kakuatan saméméh ngalakukeun pangropéa atawa pangaluyuan.
- Do not operate the lathe under the influence of drugs, alcohol, or medication.
- Pastikeun workpiece geus aman clamped in the chuck or supported by the tailstock.
- Use the automatic power-off protection cover to protect the chuck from dust and debris during operation.
- Familiarize yourself with the emergency stop switch location and operation.
3. Setélan
3.1 Ngabongkar sareng Inspeksi
- Sacara saksama miceun sadaya komponén tina bungkusan.
- Inspect all parts for any signs of damage during transit. If any damage is found, do not proceed with assembly or operation and contact customer support.
- Verify that all items listed in the 'Package Content' section are present.
3.2 Masang Mesin Bubut
The VEVOR Mini Metal Lathe is a benchtop model. Ensure it is placed on a sturdy, level workbench capable of supporting its weight (approximately 40 kg / 88.18 lb). Secure the lathe to the workbench using appropriate fasteners through the mounting holes to prevent movement during operation.
3.3 Cék Awal
- Pastikeun yén sakabéh fasteners ketat.
- Check that the chuck rotates freely.
- Verify that the tailstock and tool post move smoothly along their respective tracks.
- Connect the power cord to a grounded electrical outlet matching the specified voltage (110V / 60Hz for US, 220V / 50Hz for EU).
4. Parentah Operasi
4.1 Powering on / Pareum
- To power on, ensure the emergency stop switch is disengaged (pulled out).
- To power off, press the red emergency stop button.
4.2 Kontrol Kecepatan Spindle
The lathe features a multi-speed control with two main ranges and continuous adjustment within each range:
- Low Speed Range: 1-1250 RPM
- High Speed Range: 100-2500 RPM
Use the speed control knob to select the desired RPM. The digital display will show the current spindle speed. A switch (F/R) allows for forward and reverse rotation.
4.3 Operasi cuk
The lathe is equipped with an ultra-precision 3-jaw chuck. To secure a workpiece:
- Insert the chuck key into one of the chuck's holes.
- Rotate the key to open or close the jaws.
- Place the workpiece firmly against the jaws.
- Tighten the chuck jaws evenly using the chuck key until the workpiece is securely held.
- Always remove the chuck key before starting the lathe.
4.4 Tailstock Adjustment
The movable tailstock provides support for longer workpieces. To adjust:
- Loosen the fixed handle to allow the tailstock to slide along the bed.
- Position the tailstock to support the workpiece.
- Tighten the fixed handle to secure the tailstock in place.
- The MT2 dead center can be adjusted by loosening the quill lock and turning the tailstock handwheel.
4.5 Tool Post Adjustment
The 4-way tool post allows for quick and easy tool changes and adjustments. To adjust or change a tool:
- Loosen the locking mechanism on the tool post.
- Adjust the tool's position or replace it with another turning tool.
- Securely tighten the locking mechanism to ensure the tool is stable during operation.
5. Pangropéa
pangropéa biasa ensures umur panjang sarta kinerja optimal VEVOR Mini Metal Lathe Anjeun.
- beberesih: After each use, clean the lathe thoroughly. Remove all metal chips and dust from the bed, chuck, and other components. Use a brush or compressed air. Ensure the automatic power-off protection cover is in place to protect the chuck from dust.
- Lubrication: Periodically lubricate all moving parts, including the lead screws, gears, and slides, with appropriate machine oil. An oil can is included in the package for this purpose.
- Inspeksi Gir: Regularly inspect the metal gears for wear or damage. The lathe is equipped with durable metal gears, which offer a longer service life compared to nylon gears.
- Tegangan sabuk: Check the drive belt tension periodically and adjust if necessary to prevent slippage.
- Komponén listrik: Inspect the power cord and electrical connections for any signs of wear or damage.
6. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lathe henteu ngamimitian | Power cord not connected; Emergency stop engaged; Power switch off; Circuit breaker tripped. | Check power connection; Disengage emergency stop; Turn power switch on; Reset circuit breaker. |
| Spindle not rotating | Belt loose or broken; Motor issue; Speed control knob set to zero. | Check and adjust/replace belt; Contact support if motor issue; Adjust speed control knob. |
| Geter atawa noise kaleuleuwihan | Workpiece not properly secured; Loose components; Worn bearings; Unbalanced workpiece. | Secure workpiece firmly; Tighten all fasteners; Inspect bearings; Balance workpiece or reduce speed. |
| Potongan anu teu akurat | Tool dull or improperly set; Loose tool post; Worn slides; Incorrect feed rate. | Sharpen or replace tool; Secure tool post; Inspect and adjust slides; Adjust feed rate. |
7. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Modél | CJ18A |
| Kakuatan Motor | 550W DC Fase Tunggal |
| Voltage | 110V / 60Hz (US), 220V / 50Hz (EU) |
| Speed Spindle | 50-2250 ± 10% RPM (Two ranges: Low 1-1250 RPM, High 100-2500 RPM) |
| Akurasi Spindle | 0.01 mm |
| Spindle Hole | 0.8" (φ 21mm) |
| Ayun Leuwih ranjang | 7.09" / 180mm |
| Puseur Jarak | 13.78" / 350mm |
| Tailstock Taper | MT#2 |
| Bahan Gear | logam |
| Utas inci | 12-52 TPI |
| Metric Thread | 0.5-2.5 mm |
| Ukuran produk | 30" x 11.8" x 11.4" (77 cm x 30 cm x 30 cm) |
| Beurat bersih | 40 kg (88.18 lb) |
8. Tips pamaké
- Understanding Speed Ranges: The lathe offers two speed ranges (Low and High) with continuous adjustment within each. For heavier cuts or larger diameter workpieces, start with the lower speed range. For finishing passes or smaller workpieces, the higher speed range may be more appropriate. Always refer to the indicator table on the machine for recommended settings for different operations.
- Stabilitas Benda Kerja: Ensure your workpiece is always securely mounted. For longer pieces, utilize the tailstock for additional support to prevent chatter and ensure precision.
- Tool Sharpness: A sharp cutting tool is crucial for clean cuts and efficient operation. Regularly inspect and sharpen your turning tools.
9. Garansi jeung Rojongan
This VEVOR Mini Metal Lathe comes with a one-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
For technical support, warranty service, or to inquire about replacement parts, please contact VEVOR customer service through their official website or the contact information provided with your purchase. When contacting support, please have your product model (CJ18A) and serial number (if applicable) ready.
