1. Bubuka
The LONGER RAY5 mini is a compact, pre-assembled, and user-friendly laser engraving machine designed for both beginners and experienced users. It offers high-speed engraving and cutting capabilities on a wide range of materials, making it ideal for DIY projects, hobbyists, and small businesses. With its precise laser spot and smart features like WiFi connectivity, the RAY5 mini provides a versatile and efficient engraving experience.
2. Eusi Paket
Mangga parios heula bungkusanna kalawan saksama saatos nampi kanggo mastikeun sadaya barang aya sareng henteu ruksak.
- LONGER RAY5 mini Laser Engraver (Pre-assembled frame with laser module)
- Adaptor kakuatan
- Kabel Tipe-C USB
- Kacamata Kasalametan
- Guide Mimitian Gancang / Manual pamaké
- Sample Material (e.g., wood board)
- Tools (Wrench, Brush, Carving Bit)
- USB Drive (containing software and drivers)
- Red Protective Laser Cover
3. Spésifikasi
| Fitur | Rincian |
|---|---|
| merek | Leuwih lila |
| Modél | RAY5 mini (available in 2.5W and 3.5W laser power options) |
| Area Ukiran | 130 x 140 mm |
| Kagancangan Ukiran Maks. | 12000 mm / mnt |
| Ukuran Spot Laser | 0.04 x 0.04 mm |
| Bahan Dirojong | Wood, Metal, Acrylic, Leather, Food, Paper, Ceramic, Glass, Rubber, and over 300 other materials. |
| Konektipitas | WiFi, USB (Type-C) |
| Kasaluyuan software | LightBurn, LaserGRBL |
| Sistem Operasi | Android, iOS, Windows, Mac OS |
| Fitur Kasalametan | Emergency Stop, Motion Protection, Eye Protection |
| Sertifikasi | CE, FDA Registered, RoHS, FCC |
| Alat pinter | Sumuhun |
4. Setup Guide
The LONGER RAY5 mini is designed for quick and easy setup, arriving largely pre-assembled.
- Ngabongkar bungkusan: Carefully remove all components from the packaging. Verify that all items listed in the "Package Contents" section are present.
- panempatan: Place the engraver on a stable, level, and heat-resistant surface in a well-ventilated area. Ensure there is enough space around the machine for safe operation and material handling.
- Sambungan Daya: Connect the power adapter to the engraver's power port and then plug it into a suitable electrical outlet.
- USB Connection (Optional): For wired control, connect the USB Type-C cable from the engraver to your computer.
- Pamasangan parangkat lunak:
- Pikeun PC / Mac: Insert the provided USB drive into your computer. Install the recommended engraving software (LightBurn or LaserGRBL) and any necessary drivers. Follow the on-screen instructions.
- For Mobile (Android/iOS): Download the official LONGER app from your device's app store.
- Kacamata Kasalametan: Always wear the provided safety goggles before powering on the machine and during any operation.
5. Parentah Operasi
Follow these steps for safe and effective operation of your LONGER RAY5 mini laser engraver.
- Daya Hurungkeun: Flip the "ON/OFF" switch to the "ON" position. The machine will initialize.
- Connect to Software/App:
- Dikabel: Ensure your computer is connected via USB and the engraving software is running.
- Nirkabel (WiFi): Open the LONGER app on your mobile device or connect via WiFi from your computer's software. Follow the app/software instructions to establish a connection. The machine supports offline engraving once a file geus dimuat.
- Prepare Material: Place the material you wish to engrave or cut onto the working platform. Ensure it is flat and securely positioned within the 130x140mm engraving area.
- Design & Settings:
- Create or load your design in LightBurn, LaserGRBL, or the LONGER app.
- Adjust laser power, speed, and passes according to the material type and desired effect. Refer to the software's material settings guide for recommendations.
- Use the focus adjustment knob (if applicable) to ensure the laser is properly focused on the material surface for optimal results.
- Praview & Position: Use the software's framing function to preview the engraving area on your material. Adjust the material or design position as needed.
- Mimitian Engraving:
- PENTING: Ensure you are wearing safety goggles and that the red protective laser cover is in place over the laser module.
- Initiate the engraving process from your software or app.
- Monitor the engraving process closely.
- Eureun Darurat: In case of any malfunction or emergency, immediately press the prominent red Emergency Stop button on the machine.
- Parantosan: Once engraving is complete, wait for the laser to cool down and the machine to stop moving before removing your material.
6. Pangropéa
Regular maintenance ensures optimal performance and extends the lifespan of your laser engraver.
- Cleaning the Laser Lens: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution (specifically designed for optics). Ensure the machine is powered off before cleaning.
- Ngabersihan Mesin: Use a soft brush or compressed air to remove dust and debris from the machine's frame, rails, and moving parts.
- Check Belts and Pulleys: Inspect the drive belts for tension and wear. Ensure pulleys are free of debris and move smoothly.
- Ventilasi: Always operate the machine in a well-ventilated area. Regularly check that air vents are not obstructed.
7. Cara ngungkulan
If you encounter issues with your LONGER RAY5 mini, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Mesin teu hurung | Power cable loose, power adapter faulty, emergency stop engaged. | Check all power connections. Ensure the emergency stop button is disengaged (twist to release). Try a different power outlet. |
| Laser teu firing atawa kaluaran lemah | Incorrect focus, laser lens dirty, low power setting, laser module faulty. | Adjust laser focus. Clean the laser lens. Increase laser power in software. Contact support if the issue persists. |
| Engraving quality is poor/blurry | Incorrect focus, material not flat, engraving speed too high, laser lens dirty. | Ensure proper focus. Secure material flat on the platform. Reduce engraving speed. Clean the laser lens. |
| Mesin teu nyambung ka komputer/aplikasi | USB cable loose/faulty, WiFi connection issues, driver not installed, software not updated. | Check USB cable and ports. Reconnect WiFi. Reinstall drivers. Update software to the latest version. |
| Machine stops mid-engraving | Motion protection triggered, power interruption, software crash. | Check for obstructions. Ensure stable power supply. Restart software and machine. |
8. Tips pamaké
- Material Versatility: The RAY5 mini can engrave over 300 types of materials, including wood, leather, acrylic, paper, food, and even some metals. While it excels at engraving, its cutting capabilities are best suited for thinner materials like paper, thin wood, and acrylic.
- Engraving Stainless Steel: Yes, the machine can engrave stainless steel. For best results, you may need to apply a special marking spray (like Cermark) to the metal surface before engraving.
- Speed for Efficiency: With a maximum engraving speed of 12000mm/min, you can complete projects faster. Experiment with speed and power settings to find the optimal balance for your specific material and desired detail.
- Fine Detail: The 0.04x0.04mm laser spot size allows for incredibly fine details and high-resolution engravings. Ensure your design files are high quality to take full advantage of this precision.
- Software Choice: Both LightBurn and LaserGRBL are popular and powerful software options. LightBurn offers more advanced features, while LaserGRBL is a good free alternative for basic operations. Explore both to see which best fits your workflow.
9. Émbaran Kasalametan
Operating a laser engraver involves potential hazards. Always adhere to the following safety guidelines:
- Panjagaan panon: ALWAYS wear the provided safety goggles when the laser engraver is in operation. Direct exposure to the laser beam can cause severe eye damage.
- Ventilasi: Operate the machine in a well-ventilated area to dissipate fumes and smoke produced during engraving, especially when working with materials like wood, plastic, or leather.
- Bahaya Seuneu: Laser engraving can ignite flammable materials. Keep a fire extinguisher nearby and never leave the machine unattended during operation.
- Kasalametan Bahan: Only engrave materials that are safe for laser processing. Avoid materials that produce toxic fumes or can catch fire easily. Do not engrave reflective materials without proper precautions.
- Eureun Darurat: Familiarize yourself with the location and operation of the Emergency Stop button. Use it immediately in case of any unexpected behavior or hazard.
- Motion Protection: The machine is equipped with motion protection. Avoid touching moving parts during operation.
- Barudak jeung Pets: Keep children and pets away from the operating area.
- Daya Pareum: Always power off and unplug the machine before performing any maintenance, cleaning, or adjustments.
10. Garansi jeung Rojongan
For warranty information, technical support, or service inquiries, please refer to the official Longer websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen resi pameseran anjeun salaku bukti pameseran.
