Bubuka
This manual provides detailed instructions for the safe and efficient operation, installation, maintenance, and troubleshooting of your VEVOR Commercial Soft Ice Cream Machine. Please read this manual thoroughly before use and retain it for future reference.
Produk Leuwihview
The VEVOR Commercial Soft Ice Cream Machine is a high-capacity, stainless steel unit designed for producing soft-serve ice cream, yogurt, or sorbet. It features two 1.6-gallon (6L) hoppers, allowing for 3 different flavors (2 single, 1 mixed) and an hourly output of 5.3-7.4 gallons (20-28 liters). Equipped with a powerful 2200W compressor and an intelligent LCD control panel, it offers efficient and user-friendly operation.
Video produk
Video: Demonstrates the features and operation of the VEVOR Commercial Soft Ice Cream Machine, including ice cream dispensing and key components.
Peringatan Kasalametan
Please read and understand all safety warnings before operating the machine to prevent injury or damage.
Precautions Kasalametan Umum
- Kasalametan listrik: Ensure the power supply matches the machine's requirements (AC220V, 110V/220V±10%). Use a 50A circuit breaker for AC110V. Always use the correct power plug for local electrical requirements. Do not touch electrical components with wet hands.
- Wewengkon Gawé: Keep the work area clean and well-lit. Do not operate in damp or wet conditions. Keep children and unauthorized personnel away from the machine.
- Pangropéa: Disconnect power before any maintenance or repair. Ensure all covers and protective devices are closed and in place during operation.
- Paké ditangtoskeun: Use the machine only for its intended purpose. Do not modify the machine or use inappropriate attachments.
Catetan penting
- There is no refrigeration function in the tank, so please take out the ice cream mixture in time when not in use.
- Given the importance of the formulation of ice cream, it is highly recommended that you follow the standard ratio of water and ice cream powder (1:2.5), instead of using milk paste.
spésifikasi
The following table outlines the technical specifications for the VEVOR Commercial Soft Ice Cream Machine (Model YKF-8228H):
| Atribut | Nilai |
|---|---|
| Modél | YKF-8228H |
| Kakuatan | 2200W |
| És Krim Kaluaran | 5.3-7.4 Gal (20-28L) per Jam |
| Kamampuh Hopper | 6L x 2 (1.6 Gal x 2) |
| Refrigerant | R410a |
| Dimensi produk | 21.3 x 23.2 x 53.5 inci / 540 x 590 x 1360 mm |
| Beurat produk | 260 pon / 118 kg |
| Bahan Awak | Beusi sténless |
| Mérek Compressor | Panasonic |
| Sertifikasi | CE |
Diagram Dimensi Produk
Image: Product dimensions diagram showing height 53.5 inches / 1360mm, width 21.3 inches / 540mm, and depth 23.2 inches / 590mm.
Setup sareng Instalasi
Ngabongkar sareng Inspeksi Awal
Upon receiving your VEVOR Commercial Soft Ice Cream Machine, carefully unpack all components. Inspect the machine for any visible damage during transit. If any damage is found, do not proceed with installation and contact customer support.
Eusi pakét
- 1 x Lemes Ngawula Mesin És Krim
- 1 x Tempat Es Krim Cone
- 1 x Set of Accessories (including 4 distinct nozzles, seals, etc.)
- 1 x User Manual (PDF available for download: Manual Manual PDF)
panempatan
- Teundeun mesin dina stabil, permukaan datar.
- Ensure adequate clearance around the machine for proper ventilation. The machine is equipped with cooling vents on the sides and back.
- The machine features universal fixed casters for easy movement; ensure brakes are engaged once positioned.
Majelis komponén
Cone Holder Installation
Attach the additional cone holder to the side of the machine to improve working efficiency.
Image: Cone holder attached to the side of the ice cream machine.
Pamasangan Nozzle
Select one of the 4 distinct nozzles and install it onto the dispensing outlet. These nozzles allow for various ice cream shapes.
Image: Various nozzle shapes for ice cream dispensing.
Dulang Tetes
Ensure the removable drip tray is correctly positioned below the dispensing area to catch any drips and maintain cleanliness.
Image: Removable drip tray and cooling vents on the ice cream machine.
Operasi
Preparing the Mixture
- Prepare your ice cream mixture according to the recommended ratio of water and ice cream powder (1:2.5). Do not use milk paste.
- Pour the prepared mixture into the two 1.6-gallon (6L) stainless steel hoppers located at the top of the machine.
Image: Ice cream mixture being poured into the hoppers.
Kontrol Panel Langkungview
The intelligent LCD control panel allows for easy monitoring and adjustment of machine settings.
Image: Close-up of the intelligent LCD control panel with buttons for AUTO, CLEAN, STOP, HARD, SOFT, and SET. Displays current cup count, hardness, and standby status.
- OTOMATIS: Initiates the ice cream making process.
- BERESIH: Activates the one-click automatic cleaning function.
- EUREUN: Halts the machine operation.
- HARD / SOFT: Adjusts the hardness of the ice cream.
- SET: Used to configure various parameters like temperature and hardness.
- The display shows time, temperature, hardness, and quantity of ice cream produced.
Nyieun És Krim
- Ensure the hoppers are filled with the prepared mixture.
- Hurungkeun mesin ngagunakeun switch kakuatan.
- Use the control panel to set your desired ice cream hardness.
- Press the "AUTO" button to start the freezing process.
- Once the ice cream is ready (indicated on the display), pull down one of the three ergonomic handles to dispense your desired flavor (two single flavors, one mixed flavor).
Image: Soft serve ice cream being dispensed from the machine into a cone.
Pangropéa
beberesih poean
The machine features a convenient one-click automatic cleaning function:
- Ensure the hoppers are empty or contain only water for cleaning.
- Press the "CLEAN" button on the intelligent LCD panel.
- The machine will initiate an automatic cleaning cycle.
- After the cycle, drain the cleaning water from the drip tray.
Regular Cleaning and Inspection
- Rutin ngabersihan exterior mesin kalayan iklanamp lawon.
- Periodically inspect the cooling vents for any obstructions and ensure they are clear for efficient heat dissipation.
- Clean the removable drip tray regularly to prevent spills and maintain hygiene.
- Disassemble and clean the dispensing handles and nozzles thoroughly to prevent bacterial growth.
Pamérésan masalah
Bagian ieu nyayogikeun solusi pikeun masalah umum anu anjeun tiasa patepang. Lamun masalah persists, mangga ngahubungan rojongan customer.
Isu umum jeung Solusi
| Masalah | Mungkin Cukang lantaranana / Solusi |
|---|---|
| Mesin teu hurung | Check power plug connection. Ensure power input voltage is correct. Check if the internal connection wires are loose (if comfortable opening the cover). |
| Ice cream mixture not freezing properly | Ensure the correct ratio of water to ice cream powder (1:2.5) is used. Check if the machine is in "AUTO" mode. Verify ambient temperature is within operating limits. |
| Machine stops during operation (over-current protection) | This can occur during high-strength continuous operation. Stop the machine, allow it to cool down for a few minutes. If it doesn't recover after 10 minutes, shut down and restart. |
| Ice cream is too soft or too hard | Adjust the hardness setting using the "HARD" or "SOFT" buttons on the control panel. |
| Irregular digital display at startup | This is normal. The display should stabilize after 3 seconds. |
| Fan continues to rotate after power off | This is normal. The fan continues to rotate for a few seconds to dissipate residual heat. |
Tip pamaké
- To achieve the best texture, always follow the recommended ice cream powder to water ratio (1:2.5).
- For optimal performance and longevity, ensure the machine is placed in a well-ventilated area to allow for efficient heat dissipation.
- Regularly check and clean the drip tray and dispensing nozzles to maintain hygiene and prevent blockages.
- Experiment with different nozzle shapes to create unique and appealing ice cream presentations.
Rojongan sareng Inpormasi Kontak
For product questions, technical support, or any issues not covered in this manual, please contact VEVOR customer service:
- Surélék: CustomerService@vevor.com
This is the original instruction manual. VEVOR reserves the right to interpret this manual and make updates to the product without prior notice. The appearance of the product may vary from the received item due to technological or software updates.
