eWelink Smart TH16 Switch Instruction Manual

1. Langkungview

The mumubiz eWelink Smart TH16/TH16RF Switch is a universal smart switch designed for remote and automatic control of appliances. It integrates temperature monitoring capabilities using a DS18B20 sensor, allowing devices to be turned on or off based on predefined temperature ranges. This smart switch supports timing functions, scene triggers, and voice control through popular smart home platforms.

Fitur konci:

• Dukungan Aplikasi: Free eWelink mobile App for iOS and Android.
• Status singkronisasi: Real-time device status updates provided to the App.
• Real-time Monitor: Monitors real-time temperature.
• Jauh ON/OFF: Turn electrical devices on/off from anywhere with the high-accuracy waterproof DS18B20 sensor.
• Kontrol Bagikeun: Control your smart home devices collaboratively with family members.
• Waktos: Supports up to 8 enabled countdown, single, or repeat timing tasks.
• Modeu Otomatis: Automatically turns devices on/off at a specified temperature range.
• Modeu Manual: Allows immediate manual control (on/off).
• Trigger Smart Scene: Temperature values can act as smart scene triggers for other eWelink devices.
• Kontrol sora: Cocog sareng Amazon Alexa, Google Home, sareng Google Nest.
• Sénsor Awét: Features a waterproof temperature sensor with a stainless steel probe for high accuracy and wide application.

2. Spésifikasi

DS18B20 Temperature Sensor Specifications:

3. Setélan

3.1. Daptar pariksa Pra-instalasi

• Ensure your smartphone or tablet is connected to a 2.4GHz Wi-Fi network with internet access.
• Have your Wi-Fi password readily available.
• Aktipkeun Bluetooth dina telepon pinter atanapi tablet anjeun.
• Ensure your device has access to the App Store (iOS) or Google Play (Android).
• Verify your router is MAC-open.

3.2. Diagram Kabel

Awas: For safety, ensure the sensor is connected before powering on the device. Do not touch the sensor socket while the device is powered.

3.3. Pamasangan Aplikasi sareng Pamasangan Alat

1. Download the eWelink App: Milarian pikeun "eWelink" in your device's App Store (iOS) or Google Play (Android) and install it.
2. Ngadaptar/Log: Register a new eWelink account or log in if you already have one.
3. Daya Up: Connect the TH-16 Smart Switch to power according to the wiring diagram.
4. Observe LED Status: Once powered, check the status of the blue LED light on the device. There are two main statuses:
   • Quick Blinking (3 times quickly, then steady for 1 second): This indicates Quick Pairing mode. Proceed to step 5.
   • Slow Blinking (flashes once every 3 seconds): This indicates Compatible Mode. Long press the manual switch button until the LED blinks rapidly (as in Quick Pairing mode), then proceed to step 5.
5. Tambahkeun Alat dina App:
   • Open the eWelink App.
   • Tap the "+" icon in the upper right corner of the interface.
   • Pilih "Tambahkeun Alat".
   • The app will search for nearby devices. Once your device is found, tap "+" next to it.
   • Select your 2.4GHz Wi-Fi network and enter the correct Wi-Fi password. Tap "Next".
   • Wait for the device to connect. Once successfully added, tap "Done".

4. Parentah Operasi

4.1. Basic App Functions

• Jauh ON/OFF: Tap the power icon in the eWelink app to turn your connected appliance on or off from anywhere.
• Synchronous Switching State: The app displays the real-time status of the switch.
• Kontrol Bagikeun: Grant control permissions to other eWelink users (family members) to manage the device.



• Jadwal waktos: Set up single, repeat, countdown, or loop timers for automated operation. The app supports up to 8 timing tasks.



• Smart Scene Control: Use the temperature readings from the DS18B20 sensor as conditions to trigger other smart home devices or scenes within the eWelink ecosystem.

4.2. Temperature-Based Automatic Control (Auto Mode)

The TH-16 Smart Switch can automatically turn devices on or off based on temperature thresholds detected by the DS18B20 sensor.

1. In the eWelink app, navigate to the device settings for your TH-16 switch.
2. Select the 'Auto' tab.
3. Set the desired temperature thresholds for turning the device ON (e.g., Temp. Higher than 29.0°C) and OFF (e.g., Temp. Lower than 27.0°C).
4. Enable the 'Auto' mode. The device will now operate automatically based on these settings.

4.3. Inching Function

The inching function allows the device to turn on for a brief, set duration before automatically turning off. This is useful for momentary actions.

1. In the eWelink app, go to the device settings for your TH-16 switch.
2. Find 'Inching Settings' or 'Inching duration'.
3. Set the desired duration for the inching function (e.g., 0.5 seconds).
4. Enable the inching function. When activated, the device will turn on for the set duration and then turn off.

4.4. Kontrol sora

The TH-16 Smart Switch is compatible with Amazon Alexa and Google Home/Nest for voice commands.

1. Ensure your eWelink account is linked to your Alexa or Google Home app.
2. Sakali dikaitkeun, anjeun tiasa nganggo paréntah sapertos:
   • "Alexa, turn on Thermostat."
   • "OK Google, turn on the switch."

4.5. Remote Control Pairing (TH-16RF model only)

If you have the TH-16RF model, you can pair it with an RF remote control.

1. Cocog:
   • Hold the manual switch button on the TH-16RF for 3 seconds until the RF pairing indicator (red light) turns on.
   • Then, long press the desired button(s) on your RF remote control.
   • Release the remote control button(s) once matching is successful.
2. Hapus Kodeu:
   • Long press the manual switch button for 15 seconds (the RF pairing indicator will be continuously on).
   • Loosen the manual switch button until the RF pairing indicator (red light) turns off and then flashes rapidly 5 times. This clears all paired remote controls.

5. Pangropéa

To ensure optimal performance and longevity of your eWelink Smart TH16 Switch, keep the device clean and free from dust. Avoid exposing it to extreme temperatures or humidity outside of its specified operating conditions. Regularly check wiring connections for security. If the device is not in use for an extended period, consider disconnecting it from power.

6. Cara ngungkulan

6.1. Solutions for Product Matching Failure and Offline Issues

1. From the eWelink App homepage, click the profile icon (usually in the lower right corner).
2. Navigate to "Message" > "Guide" or "Profile" > "Ewelink support" for detailed troubleshooting articles.
3. If the issue persists, try using another phone or a personal hotspot to re-add the device. This can help rule out local network or phone-specific problems.

6.2. Masalah & Solusi Umum

• Alat teu nyambung ka Wi-Fi: Ensure your Wi-Fi network is 2.4GHz, you have entered the correct password, and your router is not blocking new devices (MAC-open). Try moving the device closer to the router.
• Pembacaan Suhu anu teu akurat: Ensure the DS18B20 sensor is properly connected and immersed in the environment you wish to monitor. Avoid placing the sensor near heat sources that could skew readings.
• Kontrol Sora Teu Gawé: Verify that your eWelink account is correctly linked to your Alexa or Google Home app. Check that the device name in eWelink is recognized by your voice assistant.

7. Tips pamaké

• Pangimeutan kalembaban: Please note that the included DS18B20 sensor only detects temperature. If you require humidity monitoring, you will need to acquire a separate humidity sensor. The TH-16 switch does not currently support humidity sensors.
• Kapasitas kakuatan: The switch supports a maximum current of 16A and a total power of 3000W. This is generally sufficient for most household appliances, including electric boilers (up to 3000W) and pumps (e.g., 1HP motor is approx. 746W). Always ensure the connected appliance's power consumption does not exceed the switch's limits, especially considering starting currents for motors.
• Brand and App: While the product brand is mumubiz, it is designed to work seamlessly with the eWelink app, providing a familiar smart home experience.
• Operasi mandiri: The device requires a 2.4GHz Wi-Fi connection and the eWelink app for full functionality. It cannot operate entirely without a network connection or the associated application.
• Kabel penyuluhan: If the included sensor cable length is insufficient, extension cables are available for purchase.

8. Rojongan

For further assistance or inquiries, please contact mumubiz support at: info@mumubiz.com

Manual pamaké lengkep dina format PDF ogé sadia pikeun diundeur: View Manual Pamaké (PDF)