1. Bubuka
The FLAMMA FV01 Vocal Effects Processor, also known as the "Corrector," is a compact and versatile pedal designed to enhance vocal performance. It offers precise pitch correction, high-quality delay and reverb effects, and multiple vocal tone settings. The FV01 can function as a microphone amplifier or a traditional stompbox, providing flexible output options for various setups.
2. Émbaran Kasalametan
Please read and understand all instructions before using the FV01. Keep this manual for future reference. Do not attempt to disassemble or modify the unit. Use only the specified power adapter. Avoid exposing the unit to water, moisture, or extreme temperatures. Ensure proper ventilation during use.
3. Eusi Paket
- 1x FLAMMA FV01 Vocal Effects Processor Pedal
- 1x AC Adapter (9V DC)
- 1x Safety Instruction & Warranty Card
4. Tata perenah
Familiarize yourself with the controls and connections of your FV01 pedal.
- Tombol REVERB: Adjusts the reverb effect level.
- DELAY Knob: Adjusts the delay effect level.
- CORRECTION Knob: Adjusts the pitch correction level (0-100).
- TONE Button: LED button to switch between different microphone tone modes.
- Saklar suku: Toggles effects on/off, and controls other functions.
- GITAR DI: 1/4'' mono audio input jack for instrument.
- GITAR OUT: 1/4'' mono audio output jack for instrument.
- MIC: XLR balanced input jack for microphone.
- Knob GAIN: Adjusts the input gain level for the microphone.
- LINE IN Button: Toggles the line in function on/off.
- Tombol 48V: Toggles 48V phantom power on/off for condenser microphones.
- XLR OUT: XLR balanced output jack.
- Saklar LIFT/GND: Grounding switch to eliminate hum.
- DC IN: Connects to the 9V DC power supply.
5. Setélan
5.1 Sambungan Daya
Sambungkeun adaptor daya 9V DC anu kalebet kana DC IN jack (14) on the pedal. Ensure the adapter is center negative and provides 500mA or more. Do not use unauthorized power adapters.
5.2 Panyambung Audio
- Input mikropon: Sambungkeun mikropon anjeun ka MIC XLR balanced input jack (8). If using a condenser microphone, activate 48V phantom power using the 48V kancing (11).
- Input Instrumen: Connect your guitar or other instrument to the GITAR DI 1/4'' mono audio jack (6).
- Kaluaran:
- Nyambungkeun XLR OUT balanced output jack (12) to your mixer or audio interface.
- Nyambungkeun GITAR OUT 1/4'' mono audio output jack (7) to your guitar amplifier atawa alat audio sejenna.
- Grounding: Ngagunakeun éta LIFT/GND switch (13) to eliminate any ground loop hum.
6. Operasi
6.1 Basic On/Off and Footswitch Functions
- Aktipkeun épék: Press the footswitch (5) to turn on Vocal TONE Mode Correction, Reverb, and Delay effects. The footswitch LED will illuminate green.
- Deactivate Correction: Press the footswitch (5) again to turn off the Correction effect. The footswitch LED will turn red.
- Deactivate All Effects: To turn off all Vocal TONE Mode Correction, Delay, and Reverb effects, quickly press the footswitch (5) twice when effects are active. The footswitch LED will turn off.
6.2 Vocal Tone Modes
The FV01 offers three unique vocal tone settings. Press the NADA button (4) to cycle through these modes:
- LED Pareum: Normal Mode (flat EQ)
- LED Beureum: WARM Mode (enhanced low frequencies)
- LED biru: BRIGHT Mode (enhanced high frequencies)
6.3 Reverb Effects
The FV01 features three classic reverb effects. Rotate the REVERB knob (1) to select and adjust the volume level of the reverb effect:
- RM: Room reverb with low decay.
- HL: Huge hall reverb.
- PL: Classic plate reverb.
Guitar Reverb: A separate reverb effect for the guitar can be adjusted in the hidden menu. Access this by pressing and holding the footswitch.
6.4 Delay Effects
The FV01 includes three distinct delay effects. Rotate the TUNDA knob (2) to select and adjust the volume level of the delay effect:
- TP: Warm tape delay.
- Ditjen: Digital, modern delay with distinct replay.
- SL: Classic slap delay.
Ketok Tempo: The delay time can be controlled using the built-in TAP TEMPO feature. This function is accessible in the hidden mode (press and hold the footswitch).
6.5 Pitch Correction
Adjust the desired level of pitch correction using the KOREKSI knob (3). Turn clockwise for more correction, counter-clockwise for less. The range is from 0 (no correction) to 100 (maximum correction).
6.6 Line In Function
The LINE IN button (10) activates or deactivates the line input function. When activated, the FV01 can serve as a microphone amplifier for the microphone connected to the MIC IN. This allows it to function as a traditional stompbox for vocal processing.
6.7 Modeu kaluaran
The FV01 supports two distinct output modes:
- Individual Mode: In this mode, the guitar signal is routed exclusively through the GITAR OUT, and the microphone signal is routed exclusively through the XLR OUT.
- Mode Campuran: In this mode, both the guitar and microphone signals are mixed together and sent to both the GITAR OUT jeung XLR OUT.
Pikeun Ngaganti Modeu Kaluaran:
- Ensure the FV01 is powered off.
- Press and hold the footswitch (5) while powering on the FV01.
- The color of the footswitch LED will indicate the current mode:
- Kedip-kedip Biru: Individual Output Mode
- Beureum kedip-kedip: Mixed Output Mode
7. Pangropéa
- Bersihkeun unitna nganggo lawon anu lemes sareng garing. Ulah nganggo pembersih cair.
- Avoid exposing the unit to direct sunlight, heat sources, or excessive dust.
- Upami teu dianggo salami lami, pegatkeun adaptor daya.
8. Cara ngungkulan
- Henteu aya sora: Check all cable connections, ensure the power adapter is correctly connected, and verify that the volume/gain knobs on the FV01 and connected equipment are appropriately set.
- Noise Humming: Coba nganggo LIFT/GND switch (13) to eliminate ground loop hum. Ensure all cables are in good condition.
- Effects Not Activating: Check the footswitch LED indicator. If it's off, press the footswitch once. If it's red, press it again to activate correction.
- Pitch Correction Issues: Pastikeun KOREKSI knob (3) is set to a desired level.
9. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Ngaran Brand | FLAMMA |
| Nomer modél | FV01 |
| Asalna | Daratan Cina |
| Sertifikasi | CE, FCC |
| Gitar Dina | 1/4'' mono audio jack (impedance value: 1M ohms) |
| Guitar Out | 1/4'' mono audio jack (impedance value: 100 ohms) |
| Input Mic | XLR saimbang jack input (nilai impedansi: 2.14k ohm) |
| Kaluaran XLR | XLR saimbang jack kaluaran (nilai impedansi: 300 ohm) |
| Sasayogian tanaga | 9V DC |
| Draw ayeuna | 500mA |
| Diménsi | 86.6 x 125 x 60 mm |
| Beurat | 0.371 kg |
| Réspon Frékuénsi | 20 Hz - 20K Hz |
| Batré Kaasup | No |
10. Tips pamaké
- Kasaluyuan adaptor kakuatan: The FV01 requires a 9V DC power supply with a center-negative polarity and a minimum current of 500mA. Ensure you use the correct adapter for your region (e.g., US, EU, UK, AU, JP, BR versions often refer to the power adapter type). Using an incorrect adapter can damage the unit.
- Vocal-Only Use: The FV01 can be used solely for microphone processing without a guitar connected. In "Individual Mode," the microphone signal will output only through the XLR OUT.
- Experiment with TONE Modes: Don't hesitate to try the WARM and BRIGHT vocal tone modes to find the best fit for your voice and musical style.
11. Jaminan & Dukungan
For warranty information and technical support, please refer to the included Safety Instruction & Warranty Card or contact FLAMMA customer service through their official channels.
12. Video Demonstrasi Produk
Watch this video for a demonstration of the FLAMMA FV01 Vocal Effects Processor in action, showcasing its features and sound capabilities.
