D5 Multi-Dynamics e nang le Parallel Detection
Bukana ea Mosebelisi
LIEKETSENG
Rea u amohela
Kea leboha ha u khethile Waves! E le hore u rue molemo ka ho fetisisa ho plugin ea hau e ncha ea Waves, ka kopo nka nakoana ho bala tataiso ena ea mosebedisi.
Ho kenya software le ho laola laesense ea hau, o hloka ho ba le akhaonto ea mahala ea Waves. Ingolise ho www.waves.com. Ka ak'haonte ea Waves, o ka boloka lihlahisoa tsa hau, oa nchafatsa Moralo oa Ntlafatso ea Maqhubu, o nka karolo mananeong a bonase, 'me u lule u tseba lintlha tsa bohlokoa.
Re fana ka maikutlo a hore u tloaelane le maqephe a Waves Support: www.waves.com/support. Ho na le lingoliloeng tsa tekheniki mabapi le ho kenya, ho rarolla mathata, litlhaloso, le tse ling. Hape, o tla fumana lintlha tsa puisano tsa k'hamphani le litaba tsa Waves Support.
Sehlahisoa se Felletseview
EMo-D5 plugin ke multiprocessor e tsoetseng pele empa e le bonolo ho e sebelisa e fanang ka matla a tse hlano. plugins sehokelong se le seng. E u fa maemo a mangata a fapaneng bakeng sa ho theha matla a lets'oao lefe kapa lefe, ka zero latency le ts'ebeliso e tlase haholo ea CPU.
li-processor tsa eMo-D5:
- Keiti ka li-filters tse inehetseng tsa HP/LP le khetho ea kantle ea sidechain
- Sekontiri e nang le ts'ebetso e ts'oanang ea compression, li-filters tse inehetseng tse phahameng / tse tlase, le khetho ea kantle ea sidechain
- C-e boima Leveler e nang le mefuta e feto-fetohang
- Ka botlalo DeEsser ka pre/post-compressor routing le mefuta e 3 ea li-filters
- Tlhaselo e boreleli, e bohale Limiter e nang le zero latency
Ho o thusa ho laola habonolo le ho beha leihlo phetoho eohle e matla e kentsoeng ke li-processor tse fapaneng, eMo-D5 e sebelisa mokhoa o bohlale oa ho lemoha lintho tse tšoanang 'me e eketsa meter ea phokotso e kopaneng bakeng sa Leveler, Compressor, le Limiter.
EMo-D5 plugin e entsoe ho nahanoa ka lienjineri tse phelang. Sena se bonahala ho zero latency ea plugin le ts'ebetso e tlase ea CPU.
Le ha litšoaneleho tsena li le bohlokoa haholo maemong a bophelo, li bohlokoa ebile li bohlokoa lits'ebetsong tsa in-studio.
eMo-D5 e etselitsoe ho ama. Litaolo tsohle li kholo ebile li bonolo ho li-touchscreen, 'me mokhoa oa ho sebetsa o ikamahanya le mosebetsi o bonolo, o bonolo ho li-interface tsa sekirini sa touchscreen.
Likaroloana
Theknoloji ea WaveShell e re nolofalletsa ho arola li-processor tsa Waves hore li be nyane plugins, eo re e bitsang likarolo. Ho ba le khetho ea likarolo tsa processor e itseng ho u fa monyetla oa ho khetha tlhophiso e loketseng thepa ea hau hantle.
EMo-D5 plugin e kenyelletsa likarolo tse latelang:
- eMo-D5 Mono
- eMo-D5 stereo
PHAKANG MOTSAMAI
Sebelisa WaveSystem toolbar ka holimo ho plugin ho boloka le ho kenya li-presets, bapisa litlhophiso, etsolla le ho etsa mehato hape, 'me u fetole boholo ba plugin.
Joalo ka Maqhubu ohle plugins, li-presets tsa feme ke sebaka se setle sa ho qala. Tobetsa konopo ea Presets ho toolbar ea WaveSystem, 'me u khethe se seng se haufi le mohloli oa molumo oo u sebetsang le oona. E tlose ho tloha moo.
Ho seng joalo, o ka qala ho tloha qalong. Ho tsoela pele, bulela karolo e lakatsehang 'me u bapale ka knob ea monyako ho fihlela sephetho se lakatsehang.
U ka lula u seta li-control tsohle tsa plugin ka ho kenya eMo-D5 Full Reset preset, u sebelisa konopo ea Presets.
Ho ithuta haholoanyane, tobetsa aekhone e hukung e kaholimo ho le letona la fensetere ebe u bula WaveSystem Guide.
SEBAKA LE TAOLO
Sehokedi
| 1. Toolbar ea WaveSystem 2. Keiti 3. Compressor 4. Mohlankana 5.DeEsser |
6. Moeli 7. Sephetho 8. Sefa Kerafo 9. Kerafo ea Input / Output 10. Meter ea Phokotso ea Phaello e Kopantsoeng |
Karolo ea Heke
KEITI: E bulela kapa e feta karolo ea Heke.
Boholo: Buletsoe, Tloha
Boemo ba mantlha: Off
KGOMO/EXP: Toggles lipakeng tsa mekhoa ea Gate le Expander.
Mokhoa oa heke o fana ka liphetho tse hlakileng haholoanyane, ha e le hantle o khutsisa molumo oohle o ka tlase ho boemo ba Threshold.
Mokhoa oa Expander o fana ka liphetho tsa tlhaho, o seke oa khutsisa molumo. Ha ho mohla Heke e koaloang ka ho feletseng, e fana ka monyako o "bonolo".
Litaolo tse ling tsa Heke li lumella liphetho tsa tlhaho esita le ka mokhoa oa Gate.
Boemo: GATE, EXP
Ka linako tsohle: GATE
BULENG MOKHOPO: E beha boemo ba Gate Open.
Range: -Inf ho 0 dB
Kamehla: -Inf
HAUFI: E lumella phetoho e ikemetseng bakeng sa boemo ba Gate Close.
Range: -48 ho 0 db
Ka ho feletseng: 0 db
LEFATENG: E fetola boemo ba phokotso e kholo ea phaello.
Range: -Inf ho 0 dB
Kamehla: -Inf
HLASELO: E etsa qeto hore na Heke e bula kapele hakae.
Boemo: 0.1 ho 100 ms
Boemo ba mantlha: 1 ms
TS'EPA: E beha hore na Heke e tla lula e butsoe nako e kae le haeba lets'oao le oela ka tlase ho Threshold.
Boemo: 0 ho 10000 ms
Boemo ba mantlha: 0 ms
HLAHALA: E beha hore na Heke e koala kapele hakae (ea fifala) kamora hore lets'oao le oele ka tlase ho Threshold.
Boemo: 1 ho 1000 ms
Boemo ba mantlha: 100 ms
KEY: E re u khethe, u sefa, 'me u hlahlobe mohloli oa sidechain.
The Key feature e eketsa ho nepahala ho eketsehileng ho laola matla.
Senotlolo se sebetsa joalo ka sesosa se kenyang tšebetso e matla.
E ka ba ka hare (INT) - e hlahisoang ke pontšo ea eona, kapa Kantle (EXT) - e hlahisitsoeng ke mocha o mong oa molumo ka tsela ea sidechain, moo pontšo ea ka ntle e tsamaisoang ka mokhoa o ikemetseng e le ho kenya letsoho ho Hekeng.
Mefuta: INT, EXT
Ea kamehla: INT
Ho feta moo, lets'oao la Key (ebang ke INT kapa EXT) le ka sefshoa ka li-filters tsa HP/LP.
HPF Range: 16 ho 18000 Hz
Ka ho feletseng: 60 Hz
LPF Range: 16 ho 18000 Hz
Ka ho feletseng: 15000 Hz
Ho hokahanya HPF le LPF, otla Filter Link Range: Buletsoe, Off Default: Off
Ho hlahloba matshwao a bohlokwa, otla Preview. Molumo o lekotsoeng o tla angoa ke boemo ba Filters, empa o sa amehe ka matla.
Boholo: Buletsoe, Tloha
Boemo ba mantlha: Off
Limithara le Lipontšo
Li-LED tsa naha ea heke
KETE KA mithara
E bonts'a boemo ba ho kenya. Ha Key e le ho EXT, meter e tla bontša boemo ba ho kenya letsoho ba lehlakoreng la ka ntle. Lesupa le le leng le lefubelu Hekeng ea Methareng le bonts'a Maemo a Heke le a Koala. O ka seta boemo ba Heke Haufi o sa ipapise le Gate Threshold, moo lesupa la Haufi le tla dula le le kgubedu, athe Threshold marker e be tala.
KGORO GR Metara
E bonts'a palo ea phokotso e hlahisoang ke karolo ea Heke.
Phokotso ena ha e bonahale ho Combined Gain Reduction Meter.
Kerafo ea Keletso/Sephetho
E supa Gates Range le maemo a Open Threshold.
Boemo ba Open Threshold bo ka lokisoa ka ho hula letheba le leputsoa.
Senotlolo sa Heke Lisefe: li bonts'itsoe ho Sesefa Kerafo e le li-curve tse putsoa.
Karolo ea Compressor
Litaolo
COMP: E bulela kapa e feta karolo ea Compressor.
Boholo: Buletsoe, Tloha
Boemo ba mantlha: Off
KGOTSO: E beha hore na Compressor e arabela lets'oao ka tsela e mabifi hakae.
Range: BONOLO, TLOAELETSO, HARD
Kamehla: TLOAELEHILE
MOTHO: E beha boemo ba ho kopanela ha Compressor.
Range: -48 ho 0 db
Ka ho feletseng: 0 db
KAROLO: E khetha hore na lets'oao le hatelloa ka thata hakae.
Sebaka: 1 ho isa ho 20
Ntho ea kamehla: 3
HLASELO: E etsa qeto hore na Compressor e arabela ka potlako hakae ho lets'oao.
Boemo: 0.5 ho 300 ms
Boemo ba mantlha: 7 ms
HLAHALA: E etsa qeto ea hore na Compressor e fokotsa ts'ebetso ka potlako hakae ka mor'a hore lets'oao le theohe ka tlas'a Threshold. Ha o le Mokgweng wa Manual, nako ya tokollo e behwa ke Boleng ba Phatlalatso.
Ha o le Boemong ba Auto, nako ea tokollo e ikamahanya le maemo ka har'a moeli o behiloeng ke
Phatlalatso Boleng.
Mekhoa ea ho lokolloa: AUTO, MANUAL
Kamehla: MANUAL
Nako ea ho lokolloa: 1 ho 3000 ms
Boemo ba mantlha: 220 ms
KEY: Sena se u fa monyetla oa ho khetha, ho sefa le peleview DeEsser le Compressor routing kapa mohloli oa kantle oa sidechain.
The Key feature e eketsa ho nepahala ho eketsehileng ho laola matla. Senotlolo se sebetsa joalo ka sesosa se kenyang tšebetso e matla. Senotlolo se ka ba sa kahare - se hlahisoa ke lets'oao la sona, kapa Kantle - se hlahisoang ke kanale e 'ngoe ea molumo ka tsela ea sidechain ho Compressor.
Compressor e na le likhetho tse peli tsa ho tsamaisa ka hare:
- INT: Compressor e hlahisitsoe ke pontšo ea eona; DeEsser e tsamaisitsoe ka mor'a Compressor
- DeES: DeEsser e tsamaisitsoe pele ho Compressor
Mefuta: INT, DeES, EXT
Ea kamehla: INT
Ho feta moo, lets'oao la Key (ebang ke ka hare kapa kantle) le ka sefshoa ho sebelisoa li-filters tsa HP/LP.
HPF Range: 16 ho 18000 Hz
Ka ho feletseng: 60 Hz
LPF Range: 16 ho 18000 Hz
Ka ho feletseng: 15000 Hz
Ho hokahanya HPF le LPF, otla Sehokelo sa Sefe.
Lethathamo la Khokahanyo ea Sesefa: Buletsoe, E Timiloe
Boemo ba mantlha: Off
Ho hlahloba matšoao a Key, otla Preview. Molumo o lekotsoeng o tla angoa ke boemo ba Filters, empa o sa amehe ka matla.
Boholo: Buletsoe, Tloha
Boemo ba mantlha: Off
COMP MIX (e leng karolong ya OUTPUT): E dumella kgatello e tshwanang ka ho kopanya modumo o hatelletsweng le o sa hatellwang.
Range: 0 (= audio e sa hatelletsoeng) ho isa ho 100 (= audio e hatelitsoeng)
Ntho ea kamehla: 100
Limithara le Lipontšo
COMP IN Meter:
E bonts'a boemo ba ho kenya. Ha Senotlolo se le ho EXT, meter e tla bontša boemo ba ho kenya ba Senotlolo sa Kantle.
LVL COMP LIM GR Meter:
Metara ea phokotso ea phaello e kopaneng bakeng sa Leveler, Compressor, le Limiter. Palo ea phokotso ea phaello e hlahisoang ke Compressor e bonts'oa ka lamunu.
Kerafo ea ho Kena/Ho Tsoa:
E supa boemo ba Compressor's Threshold, Knee, le Ratio. Boemo ba monyako bo ka fetoloa ka ho hula letheba la lamunu.
Sefa Kerafo:
E bonts'a lihloela tsa Senotlolo sa Compressor ka lamunu.
Karolo ea Leveler
A leveler e sebelisoa ho boloka maemo a sa fetoheng holim'a likarolo tse telele tsa molumo. Ha e le hantle, leveler ke compressor e behiloeng nako e telele ea tlhaselo le linako tsa ho lokolla. Motho ea lekanyang le eena a ka ba joalo viewe entsoe joalo ka kompressor ea RMS. Sebapali se atleha hantle le ka mokhoa o pepeneneng - o palama lets'oao lefe kapa lefe le fetang moeli oa lona, ho le khutlisetsa tlase haufi le moo ho ka khonehang ho boemo bo lakatsehang (moeko).
Litaolo
LVL: E bulela kapa e feta karolo ea Leveler.
Boholo: Buletsoe, Tloha
Boemo ba mantlha: Off
MOTLATSI SETS'ELA: E beha litekanyo tse peli tse kaholimo ho hore na tekanyo e sebelisoa le sepheo sa eona
eo molumo
sesupo se baloa.
Range: -48 ho 0 db
Ka ho feletseng: 0 db
RANGE: E beha mofuta oa tšebetso ea Leveler.
Range: 0 ho 48 db
Ka ho feletseng: 6 db
Limithara le Lipontšo
Kerafo ea ho Kena/Ho Tsoa:
E bonts'a maemo a Leveler le litekanyo tsa sepheo. Leveler e bonts'itsoe joalo ka mohala o boputsoa bo bobebe.
LVL COMP LIM GR Meter:
Metara ea phokotso ea phaello e kopaneng bakeng sa Leveler, Compressor, le Limiter.
Palo ea phokotso ea phaello e hlahisitsoeng ke Leveler e bonts'oa ka boputsoa bo bobebe.
Karolo ea DeEsser
Taolo
DESSER: E bulela kapa e feta karolo ea DeEsser.
13241i
Boholo: Buletsoe, Tloha
Boemo ba mantlha: Off
MOTHO: E beha boemo ba boitlamo ba DeEsser.
Meeli ea DeEsser e sebelisa sensing e feto-fetohang ho fana ka liphetho tsa tlhaho.
Range: -48 ho 0 db
Ka ho feletseng: 0 db
MOFUTA: E beha mofuta oa sehlopha - high-pass kapa band-pass filter.
Range: Shelf
Bell
Notch
Kamehla: Shelf
FREQ: E beha sebaka sa ho qala bakeng sa sefe e phahameng kapa maqhubu a bohareng bakeng sa sefe ea band pass.
Sebaka: 16 ho 21357 Hz
Ka ho feletseng: 4490 Hz
RANGE: Sets the ampboholo ba ts'ebetso ea DeEsser.
Range: -12 ho 0 db
Kamehla: -6 db
PELEVIEW: E re u hlahlobe sefe ea DeEsser.
Boholo: Buletsoe, Tloha
Boemo ba mantlha: Off
Sefa Kerafo:
E bonts'a mofuta oa DeEsser, frequency, range, le DS e fokotseha ka pherese.
Maqhubu le mefuta e fapaneng e ka fetoloa ka ho hula letheba le pherese.
Hlokomela: Ho fokotseha ha DeEsser ha ho bonahale ho Combined Gain Reduction Meter.
Karolo ea Limiter
Litaolo
LIM: E bulela kapa e feta karolo ea Limiter.
Boholo: Buletsoe, Tloha
Boemo ba mantlha: Off
MOTHO: E beha boemo ba ho kopanela bakeng sa Limiter.
Range: -48 ho 0 db
Ka ho feletseng: 0 db
HLAHALA: E beha hore na Limiter e fokotsa ts'ebetso ka potlako hakae ka mor'a hore letšoao le theohe ka tlas'a Threshold. Ts'ebetso ena e sebelisa theknoloji e ikamahanyang le maemo, ho bolelang hore nako ea tokollo e ikamahanya le boleng ba mofuta oa Phatlalatso.
Boemo: 0.1 ho 1000 ms
Boemo ba mantlha: 100 ms
Limithara le Lipontšo
Kerafo ea ho Kena/Ho Tsoa:
E bontša boemo ba Limiter's Threshold.
Sethibela se bonts'a mola o mofubelu o tšekaletseng.
LVL COMP LIM GR Meter:
Metara ea ho fokotsa phaello ea Limiter.
E bonts'a palo ea phokotso e hlahisoang ke Limiter ka bofubelu.
Methara le Litaolo tse ling
Makeup leruo
Taolo ea Makeup Gain e sebelisetsoa ho lefella phokotso ea phaello e hlahisoang ke lisebelisoa tse ngata tse matla.
Etsa bonnete ba hore ha o kenye meter ea Output ha o matlafatsa Makeup Gain.
Range: -18 ho 18 db
Ka ho feletseng: 0 db
Meter ea Phokotso e Kopantsoeng
The Combined Gain Reduction Meter e bonts'a sebakeng se le seng se kopaneng view phokotso ea phaello e hlahisitsoeng ke Leveler, Compressor, le Limiter.
Metara ena ha e bontše phokotso ea phaello e hlahisitsoeng ke DeEsser le Gate.
Meter ea tlhahiso
Metara ea Output e bonts'a boemo ba ho qetela ba tlhahiso e hlahisoang ke eMo-D5 O bona mithara e le 'ngoe bakeng sa karolo ea Mono, limithara tse peli (Ka ho le letšehali le ka ho le letona) bakeng sa karolo ea Stereo.
Output meter e na le Peak Led le eona.
Setšoantšo sa eMo-D5 Block
Litokomane / Lisebelisoa
 |
WAVES D5 Multi-Dynamics e nang le Parallel Detection [pdf] Bukana ea Mosebelisi D5 Multi-Dynamics e nang le Parallel Detection, D5, Multi-Dynamics e nang le Parallel Detection |
