WATTS 009-FS Series BMS Sensor Connection Kit

TLHOKOMELO

Bala Bukana ena PELE U sebelisa thepa ena.
Ho hloleha ho bala le ho latela lintlha tsohle tsa polokeho le tšebeliso ho ka fella ka lefu, kotsi e mpe ea botho, tšenyo ea thepa kapa tšenyo ea thepa. Boloka Bukana ena bakeng sa tšebeliso ea nako e tlang.

TLHOKOMELO

U tlameha ho shebana le meaho ea lehae le likhoutu tsa lipeipi pele u kenya. Haeba boitsebiso bo bukeng ena bo sa lumellane le mekhoa ea mohaho oa sebaka kapa ea lipeipi tsa metsi, ho lokela ho lateloa likhoutu tsa sebaka seo. Botsa ba boholong bakeng sa litlhoko tse eketsehileng tsa sebaka seo.

Tšebeliso ea thekenoloji ea SentryPlus Alert® ha e nke sebaka sa tlhokahalo ea ho lumellana le litaelo tsohle tse hlokahalang, likhoutu le melaoana e amanang le ho kenngoa, ts'ebetso le tlhokomelo ea "backflow blocker" eo e khomaretsoeng ho eona, ho kenyelletsa le tlhokahalo ea ho fana ka drainage e nepahetseng. ketsahalo ya ho tsoa. Watts® ha e ikarabelle bakeng sa ho hlōleha ha litlhokomeliso ka lebaka la khokahanyo kapa mathata a matla.

Lekola ho tsoa ha valve ea liphallelo ka theknoloji e bohlale le e hokahaneng ho bona le ho tsebisa ka likhohola. The BMS Sensor Connection Kit e kenya sensor e kopaneng ea likhohola ho etsa hore ts'ebetso e tsebe ho bona maemo a likhohola. BMS Sensor Retrofit Connection Kit e ntlafatsa lits'ebetso tse teng ka ho kopanya le ho kenya tšebetsong sensor ea likhohola ho etsa hore ts'ebetso e tsebe ho lemoha likhohola. Ha ho tsoa ka mokhoa o feteletseng oa li-valve tsa liphallelo, sensor ea moroallo e matlafatsa ho lemoha likhohola tsa relay le ho etsa hore ho be le tsebiso ea nako ea sebele ea maemo a likhohola ka tsamaiso ea mohaho, kapa BMS.

Likarolo tsa Kit

Li-kits tsohle li kenyelletsa module ea ts'ebetso ea sensor le adapter ea matla ho nolofalletsa sensor ea likhohola. Li-retrofit kits li boetse li kenyelletsa sensor ea likhohola le likarolo tse amanang le tsona. Haeba ho na le ntho e sieo, bua le moemeli oa akhaonto ea hau.

A. Sensor activation module e nang le thapo ea motlakase ea 8′ 4-conductor, terata ea fatše, le likurufu tse 4 tsa sehokelo.

B. Li-deflectors tse 'ne (Bakeng sa Series 009, boholo ba ½" ho isa ho 2″, ka kutlo ea likhohola)

C. 24V DC adaptara ea motlakase (e hloka 120VAC, 60Hz, setsi sa motlakase se sirelelitsoeng ke GFI)w

D. E kenyelelitsoe ho lisebelisoa tsa retrofit:

• Sesenosi sa boholo ba ½” ho isa ho ¾” se nang le sekoahelo se nang le sekoahelo le deflector
• Sensor sa boholo ba 1″ ho isa ho 1½” e nang le likhohola tse 2 (1″ le 1¼” ho isa ho 1½”) le liboutu tse 2
• Sensor sa boholo ba 2″ ho isa ho 3 ″ e nang le deflector le lihlopha tse 2 tsa liboutu tse holang (liboutu tse khōloanyane bakeng sa LF009 2½” ho isa ho 3″ feela)
  

Li-kits tsa khokahano li loketse feela lits'ebetso tse ncha kapa tse seng li ntse li le teng tsa li-valve tse boletsoeng.

Litlhoko

• #2 Phillips screwdriver
• 3⁄16″ Allen wrench
• ½ ”Wrench
• Sesebelisoa se nang le ntlha e nyane ho fetola li-setting tsa switch DIP
• Mohloli oa matla, ho tloha ho 12V ho isa ho 24V
• Mohala oa terata

Tlhokomeliso Mabapi le Deflector

Hoa hlokahala deflector e boholo bo nepahetseng ha sensor ea moroallo e kentsoe tšebetsong e ncha kapa e teng ea li-valve tsa Series 009 tse fokotsehileng tsa libaka tsa khatello, boholo ba ½ "ho isa ho 2". The deflector e thusa ho beha sensor ea moroallo khahlano le valve ea backflow le ho tsoa ka kotloloho ho tsoa ho valve. Deflector e 'ngoe le e' ngoe e khabisitsoe ka letšoao la boemo ho thusa ho kenya.

Ho kenya li-valve tse ncha
Sesebelisoa sa khokahano ea sensor se kenyelletsa li-deflector tse 'ne (4) tse tšoailoeng ka boholo. Khetha boholo bo etselitsoeng ho lumellana le valve ea liphallelo ea backflow ea ho kenya.

Tlosa sensor ea moroallo ho tloha ho valve ebe u latela mekhoa ea likarolo tse peli tse latelang ho kenya mochine o nang le mochine o nang le moroallo le ho lokisa le ho kenya mochine oa ts'ebetso ea sensor.

Ho kenya li-valve tse teng
Mekhoa e latelang e kenyelletsa deflector ka ho kenya sesebelisoa sa khokahano ea sensor.

Kenya Sensor ea Moroallo

Bakeng sa likopano tsa Series 009, boholo ba ½” ho isa ho 2 ″, hokela mohatelli le sensor ea likhohola ho valve ea ho thusa ka morao. Bakeng sa boholo ba ½” ho isa ho ¾”, mokhelohi o lekana ka har'a kutlo ea likhohola. Bakeng sa boholo ba 1 ″ ho isa ho 2 ″, deflector e lekana ka har'a valve ea liphallelo.

The deflector e tlameha ho kenngoa bakeng sa sensor ea moroallo ho Series 009, boholo ba ½" ho isa ho 2 ″, hore e sebetse hantle.

Series 009, boholo ½” – ¾”

1. Lokisetsa li-grooves tsa deflector le likhopo tse ka hare tsa kutlo ho kenya mochine o ka hare ho sensor ea moroallo.
   
2. Beha sensor ea likhohola holim'a valve ea liphallelo.
   
3. Sebelisa #2 Phillips screwdriver ho tiisa sekoahelo.
   

Letoto la 009, boholo ba 1″ - 3″; Series 909 Nyenyane, boholo ¾” – 2″

1. Lokisa sethibelo hore se kene ka hare ho valve ea liphallelo. (Bakeng sa Series 009, boholo ba 1″ ho isa ho 2″ feela. Tse ling tsa lisebelisoa tsa khokahano ea sensor li kenyelletsa li-deflector tse ngata. Kenya mochini o phallisang o etselitsoeng ka ho khetheha boholo ba valve ea backflow e sebelisoang.)
   
2. Beha sensor ea likhohola holim'a valve ea liphallelo 'me u kenye liboutu tse peli tse ntseng li hola.
   
3. Tobetsa liboutu ho sireletsa sesupo le senotlolo sa likhohola. U se ke ua tiisa ho feta tekano.
   • Bakeng sa Series 009 saese 1″ to 1½” le Series 909 Small size ¾” ho isa ho 1″, sebelisa 3⁄16″ Allen wrench.
   • Bakeng sa Series 009 saese 2″ to 3″ le Series 909 Small size 1¼” ho isa 2″, sebelisa ½” wench.
   

Kenya Sensor Activation Module

Beha sesebelisoa sa SW1 DIP ho mojule oa ts'ebetso ea sensor ka tafole ea metsi e tlase ebe o hokela module ho sensor ea likhohola.

Li-switches tsa DIP ho mojule oa ts'ebetso ea sensor li ka sebelisoa ho hlakisa moeli oa metsi (sensitivity ho phallo ea metsi) ka SW1 le ho lieha ha nako (nako pele ho alamo) ka SW2. Sheba khoutu ea QR ho fumana lintlha tse ling.

Module ea activation ea sensor e fumana letšoao ho tsoa ho sensor ea likhohola ha ho fumanoa ho tsoa. Haeba ho tsoa ho kopana le maemo a ketsahalo e tšoanelehang, lebitso le bulehileng le koetsoe ho fana ka lets'oao ho terminal ea ho kenya ea BMS.

Theko e metsi tlameha e behoe ka boholo ba valve ea backflow.

1. Sebelisa #2 Phillips screwdriver ho hula likurufu tse 'ne tse mojuleng oa activation oa sensor ho tlosa sekoaelo.
   
2. Fumana boholo ba valve tafoleng e latelang ebe u sebelisa sesebelisoa se nang le ntlha e motsu ho thellisa li-switches tsa SW1 libakeng tse boletsoeng bakeng sa boholo boo. Litefiso tsa khetho ea "wet threshold" li tloha ho 40 (default) ho isa ho 55 (tse bonolo haholo).
   
3. Tobetsa konopo ea RESET ho kenya litlhophiso tse ncha.
   
4. Khutlisa sekoahelo ka li-screw tse 'nè, ho etsa bonnete ba hore O-ring e ka hare ho sekoahelo e lutse hantle ho boloka tiiso.
   
5. Tlosa sekoahelo sa lerōle ho sensor ea likhohola.
   
6. Tobetsa mojule oa activation oa sensor ka thapo e kentsoeng ho sensor ea likhohola.
   
   
   Boloka sekoahelo sa lerōle ho sireletsa sensor ea likhohola nakong ea maemo a nakoana ha mochini oa ts'ebetso oa sensor o ka hloka ho tlosoa kapa ho nkeloa sebaka.
7. Lekola hore na mojule oa activation oa sensor o lutse ka mokhoa o sireletsehileng ho sensor ea likhohola.
   

Hokela Sensor Activation Module Cable ho BMS Controller

Cable ea module ea 4-conductor sensor activation e lokela ho hokelloa ho molaoli oa BMS ho fetisetsa lets'oao le tloaelehileng le bulehileng la ho ikopanya le ho fana ka matla ho mojule oa activation oa sensor. Letšoao la ho ikopanya le koala ha ho tsoa ho bonoa.

Ho hokela thapo ya module ho molaodi

1. Sebelisa mochini o tlosang terata ho khaola lithapo tse lekaneng ho pepesa li-inch tse 1 ho isa ho tse 2 tsa likhoele tsa conductor.
2. Kenya lithapo tse tšoeu le tse tala ka har'a theminale ea ho kenya.
   
   E ka ba mohloli oa matla oa BMS (ho tloha ho 12V ho isa ho 24V) kapa adaptara ea matla ea 24V DC e fanoeng e ka sebelisoa. Ka mohloli o mong le o mong oa matla, ho hlokahala khokahano ea lefatše.
   Haeba u sebelisa adaptara ea matla, fetela ho sete e latelang ea litaelo. Etsa bonnete ba hore o sebelisa terata ea fatše e fanoeng haeba ho se na mobu o mong ho molaoli oa BMS
3. Kenya terata e khubelu setsing sa motlakase. (Mohloli oa matla ho tloha ho 12V ho isa ho 24V oa hlokahala.)
4. Kenya terata e ntšo sebakeng sa fatše.

TLHOKOMELO 

Sebaka sa lefats'e se tlameha ho hokeloa ho molaoli oa BMS pele sensor ea likhohola e kenngoa ts'ebetsong.

Ho sebelisa adaptara ea motlakase ea 24V DC 

Khetholla terata e ntle ho e mpe. Mohala o motle o na le mela e mesoeu 'me o tlameha ho kenngoa setsing sa motlakase; terata e mpe, ho kena setsing sa fatše.

1. Hokela terata e ntle ea adaptara ea matla (e ntšo e nang le mola o mosoeu) ho terata e khubelu ea thapo ea mojule oa sensor activation ebe o kenya likhoele ka har'a terminal ea motlakase.
2. Hokela terata e mpe ea adaptara ea matla (e ntšo e se nang mola) ho terata e ntšo ea thapo ea mojule oa sensor activation le terata ea fatše (haeba ho hlokahala) ebe u kenya likhoele ka har'a terminal ea fatše.
3. Hokela adaptara ea motlakase ho 120VAC, 60Hz, GFI e sirelelitsoeng ea motlakase.

LED ea sensor ea likhohola e lula e le tala ha yuniti e se e lokile.

Tiisetso e Lekanyelitsoeng: Watts Regulator Co. (“Company”) e fana ka tumello ea hore sehlahisoa se seng le se seng se lokolohe ho tsoa bofokoling ba thepa le tšebetsong tlas’a
tšebeliso e tloaelehileng bakeng sa nako ea selemo ho tloha ka letsatsi la thomello ea mantlha. Ha ho ka ba le mefokolo e joalo ka nako ea tiisetso, Khampani
e tla, ka boikhethelo ba eona, e nke sebaka kapa e lokise sehlahisoa ntle le tefo.
TIISETSO E BEHANG MONA E FUMANA KA HO BONAHALA MME KE EONA FEELA TIISETSO E FUMANG KE KAMPANI MABAPI LE TLHOKOMELISO HO SEHLAHISO. KAMPUNI HA E ETSE LITIISETSO TSE LING TSE LING, E BONAHALA KAPA E BONANG. KAMPUNI KA MONA E HLOKOMELA LITIKETISETSO TSE LING TSOHLE, TSE HLAHANG KAPA TSE BONANG, HO kenyeletsoa EMPA E SA LEKELETSO HO LITEKISO TSA LITIISETSO TSA THEKISO LE HO LOKELANG BAKENG SA LENTSOE LE KHETHEHILENG.
Tharollo e hlalositsoeng serapeng sa pele sa tiisetso ena e tla ba eona feela pheko ea ho tlola tiisetso, 'me Khampani e ke ke ea jara boikarabello bakeng sa tšenyo efe kapa efe ea tšohanyetso, e khethehileng kapa ea litlamorao, ho kenyeletsoa ntle le moeli, phaello e lahlehileng kapa litšenyehelo tsa ho lokisa kapa ho nkela thepa e 'ngoe e senyehileng haeba sehlahisoa sena se sa sebetse hantle, litšenyehelo tse ling tse bakoang ke litefiso tsa basebetsi, tieho, tšenyo ea thepa, bohlasoa, ho silafatsoa ho bakoang ke thepa e tsoang kantle ho naha, tšenyo ea maemo a mabe a metsi, lik'hemik'hale, kapa maemo afe kapa afe ao Khampani e ke keng ea a laola. Tiisetso ena e tla fediswa ke tlhekefetso efe kapa efe, tshebediso e mpe, tshebediso e mpe, ho kenngwa ka tsela e fosahetseng kapa tlhokomelo e sa lokang kapa ho fetolwa ha sehlahiswa.
Linaha tse ling ha li lumelle meeli ea hore na tiisetso e boletsoeng e nka nako e kae, 'me Linaha tse ling ha li lumelle ho qheleloa ka thoko kapa ho beheloa meeli ea tšenyo ea tšohanyetso kapa e bakiloeng ke eona. Ka hona, meeli e ka holimo e kanna ea se sebetse ho uena. Tiisetso ena e Lekanyelitsoeng e u fa litokelo tse khethehileng tsa molao, 'me u ka ba le litokelo tse ling tse fapaneng ho ea ka Naha. U lokela ho shebana le melao e sebetsang ea naha ho fumana litokelo tsa hau. HO FIHLELA HO FIHLELA HO THAMANA LE 'MUSO O SEBELISANG MOLAO, TIISETSO EFE KAPA EFE E KA HO HLOKONANG TSE KA SE HLAHLWENG, HO EKETSEHILENG LE LITIISETSO TSA HO REKISA LE HO LOKELANG HO SEBELISA MORERO OA KHETHEHILENG, LI LEBANEO HO FIHLELA SELEMO SE LE MONG HO TLOHA KA LETSATSI LA HO ROMELA SEBELE.

USA: T: 978-689-6066 • Watts.com
Canada: T: 888-208-8927 • Watts.ca
Latin America: T: (52) 55-4122-0138 • Watts.com

Litokomane / Lisebelisoa

WATTS 009-FS Series BMS Sensor Connection Kit [pdf] Tlhophiso Tataiso 009-FS, LF009-FS, LFU009-FS, SS009-FS, U009-FS, 009-FS Series BMS Connection Kit, BMS Sensor Connection Kit, Sensor Connection Kit, Connection Kit

Litšupiso

• Bukana ea Mosebelisi