WATTS 957-FS BMS Sensor Connection Kit

BOHLOKOA POLOKETSO TAELO

• TLHOKOMELO
  • Bala Bukana ena PELE U sebelisa thepa ena.
  • Ho hloleha ho bala le ho latela lintlha tsohle tsa polokeho le tšebeliso ho ka fella ka lefu, kotsi e mpe ea botho, tšenyo ea thepa kapa tšenyo ea thepa.
  • Boloka Bukana ena bakeng sa tšebeliso ea nako e tlang.
• TLHOKOMELO
  U tlameha ho shebana le meaho ea lehae le likhoutu tsa lipeipi pele u kenya. Haeba boitsebiso bo bukeng ena bo sa lumellane le mekhoa ea mohaho oa sebaka kapa ea lipeipi tsa metsi, ho lokela ho lateloa likhoutu tsa sebaka seo. Botsa ba boholong bakeng sa litlhoko tse eketsehileng tsa sebaka seo.
• TSEBISO
  • Tšebeliso ea thekenoloji ea SentryPlus Alert® ha e nke sebaka sa tlhokahalo ea ho lumellana le litaelo tsohle tse hlokahalang, likhoutu le melaoana e amanang le ho kenngoa, ts'ebetso le tlhokomelo ea "backflow blocker" eo e khomaretsoeng ho eona, ho kenyelletsa le tlhokahalo ea ho fana ka drainage e nepahetseng. ketsahalo ya ho tsoa. Watts® ha e ikarabelle bakeng sa ho hlōleha ha litlhokomeliso ka lebaka la khokahanyo kapa mathata a matla.
  • Lekola ho tsoa ha valve ea liphallelo ka theknoloji e bohlale le e hokahaneng ho bona le ho tsebisa ka likhohola. The BMS Sensor Connection Kit e kenya sensor e kopaneng ea likhohola ho etsa hore ts'ebetso e tsebe ho bona maemo a likhohola. BMS Sensor Retrofit Connection Kit e ntlafatsa lits'ebetso tse teng ka ho kopanya le ho kenya tšebetsong sensor ea likhohola ho etsa hore ts'ebetso e tsebe ho lemoha likhohola. Ha ho tsoa ka mokhoa o feteletseng oa li-valve tsa liphallelo, sensor ea moroallo e matlafatsa ho lemoha likhohola tsa relay le ho etsa hore ho be le tsebiso ea nako ea sebele ea maemo a likhohola ka tsamaiso ea mohaho, kapa BMS.

Likarolo tsa Kit

Li-kits tsohle li kenyelletsa module ea ts'ebetso ea sensor le adapter ea matla ho nolofalletsa sensor ea likhohola. Li-retrofit kits li boetse li kenyelletsa sensor ea likhohola le likarolo tse amanang le tsona. Haeba ho na le ntho e sieo, bua le moemeli oa akhaonto ea hau.
TSEBISO
Li-kits tsa ho hokahanya li loketse ho kenngoa letotong la li-valve tse boletsoeng feela

• Sensor activation module e nang le thapo ea motlakase ea 8′ 4-conductor, terata ea fatše, le likurufu tse 4 tsa sehokelo.

  
• Adapter ea matla ea 24V DC

  

• Sensor ea likhohola e nang le liboutu tse ntseng li hola (kitla ea ho khutlisa feela)

  
  TSEBISO
  Ha o kenya lekhalo la moea, hokela masakata a lekhalo la moea ka kotloloho ho sensor ea moroallo.

Litlhoko

• #2 Phillips screwdriver
• 120VAC, 60Hz, setsi sa motlakase se sirelelitsoeng sa GFI (bakeng sa adaptara ea matla a kit), kapa mohloli oa matla ho tloha ho 12V ho isa ho 24V
• Mohala oa terata

Kenya Sensor ea Moroallo le Sensor Activation Module

• Hokela sensor ea moroallo le mojule oa ts'ebetso ea sensor ho valve ea liphallelo tsa backflow. Bakeng sa likopano tse nang le sensor e kopaneng ea likhohola, qala mohatong oa 4.
• Module ea activation ea sensor e fumana letšoao ho tsoa ho sensor ea likhohola ha ho fumanoa ho tsoa.
• Haeba ho tsoa ho kopana le maemo a ketsahalo e tšoanelehang, lebitso le bulehileng le koetsoe ho fana ka lets'oao ho terminal ea ho kenya ea BMS.

Litlhophiso tsa Sensor e Tloaelehileng ea Moroallo
Litlhophiso tsa kamehla ho module ea ts'ebetso ea sensor bakeng sa ho bona ho tsoa li loketse letoto la kopano. Leha ho le joalo, li-switches tsa DIP li ka ikamahanya le maemo a fapaneng a metsi le ho lieha ha nako. Sheba khoutu ea QR ho fumana lintlha tse ling.

1. Tlosa liboutu ho sensor ea likhohola.

   

2. Beha likarolo tse peli tsa sensor holim'a valve ea liphallelo.

   

3. Kenya liboutu ebe u tiisa.

   

4. Tlosa sekoahelo sa lerōle ho sensor

   

5. Tobetsa mojule oa activation oa sensor ho sensor.

   

6. Sheba hore mojule o lutse ka botlalo ho tiisa O-ring le ho hokela motlakase.

   
   TSEBISO
   Boloka sekoahelo sa lerōle ho sireletsa sensor ea likhohola ha mochini oa ts'ebetso o hloka ho tlosoa kapa ho nkeloa sebaka.

Hokela Sensor Activation Module Cable ho BMS Controller

Cable ea module ea 4-conductor sensor activation e lokela ho hokelloa ho molaoli oa BMS ho fetisetsa lets'oao le tloaelehileng le bulehileng la ho ikopanya le ho fana ka matla ho mojule oa activation oa sensor. Letšoao la ho ikopanya le koala ha ho tsoa ho bonoa.

Ho hokela thapo ya module ho molaodi

1. Sebelisa wire stripper ho khaola ho koala ho lekaneng ho pepesa 1 ho isa ho 2 inches ea lithapo tsa conductor.
2. Kenya lithapo tse tšoeu le tse tala ka har'a theminale ea ho kenya.
   TSEBISO
   E ka ba mohloli oa matla oa BMS (ho tloha ho 12V ho isa ho 24V) kapa adaptara ea matla ea 24V DC e fanoeng e ka sebelisoa. Ka mohloli o mong le o mong oa matla, ho hlokahala khokahano ea lefatše. Haeba u sebelisa adaptara ea matla, fetela ho sete e latelang ea litaelo. Etsa bonnete ba hore o sebelisa terata ea fatše e fanoeng haeba ho se na mobu o mong ho molaoli oa BMS.
3. Kenya terata e khubelu setsing sa motlakase. (Mohloli oa matla ho tloha ho 12V ho isa ho 24V oa hlokahala.)
4. Kenya terata e ntšo sebakeng sa fatše.
   TLHOKOMELO
   Sebaka sa lefats'e se tlameha ho hokeloa ho molaoli oa BMS pele sensor ea likhohola e kenngoa ts'ebetsong.

Ho sebelisa adaptara ea motlakase ea 24V DC
Khetholla terata e ntle ho e mpe. Mohala o motle o na le mela e mesoeu 'me o tlameha ho kenngoa setsing sa motlakase; terata e mpe, ho kena setsing sa fatše.

1. Hokela terata e ntle ea adaptara ea matla (e ntšo e nang le mola o mosoeu) ho terata e khubelu ea thapo ea mojule oa sensor activation ebe o kenya likhoele ka har'a terminal ea motlakase.
2. Hokela terata e mpe ea adaptara ea matla (e ntšo e se nang mola) ho terata e ntšo ea thapo ea mojule oa sensor activation le terata ea fatše (haeba ho hlokahala) ebe u kenya likhoele ka har'a terminal ea fatše.
3. Hokela adaptara ea motlakase ho 120VAC, 60Hz, GFI e sirelelitsoeng ea motlakase.
   LED ea sensor ea likhohola e lula e le tala ha yuniti e se e lokile

Tiisetso e Lekanyelitsoeng

• Watts ("Company") e fana ka tumello ea hore sehlahisoa se seng le se seng se hloke sekoli ho thepa le moetsong tlas'a ts'ebeliso e tloaelehileng nako ea selemo ho tloha ka letsatsi leo thomello e rometsoeng ka lona. Ha ho ka ba le bofokoli bo joalo nakong ea tiisetso, Khampani, ka boikhethelo ba eona, e tla fetola kapa e lokise sehlahisoa ntle le tefo.
• TIISETSO E BEHANG MONA E FUMANA KA HO BONAHALA MME KE EONA FEELA TIISETSO E FUMANG KE KAMPANI MABAPI LE TLHOKOMELISO HO SEHLAHISO. KAMPUNI HA E ETSE LITIISETSO TSE LING TSE LING, E BONAHALA KAPA E BONANG. KAMPUNI KA MONA E HLOKOMELA LITIKETISETSO TSE LING TSOHLE, TSE HLAHANG KAPA TSE BONANG, HO kenyeletsoa EMPA E SA LEKELETSO HO LITEKISO TSA LITIISETSO TSA THEKISO LE HO LOKELANG BAKENG SA LENTSOE LE KHETHEHILENG.
• Tharollo e hlalositsoeng serapeng sa pele sa tiisetso ena e tla ba eona feela pheko ea ho tlola tiisetso, 'me Khampani e ke ke ea jara boikarabello bakeng sa tšenyo efe kapa efe ea tšohanyetso, e khethehileng kapa ea litlamorao, ho kenyeletsoa ntle le moeli, phaello e lahlehileng kapa litšenyehelo tsa ho lokisa kapa ho nkela thepa e 'ngoe e senyehileng haeba sehlahisoa sena se sa sebetse hantle, litšenyehelo tse ling tse bakoang ke litefiso tsa basebetsi, tieho, tšenyo ea thepa, bohlasoa, ho silafatsoa ho bakoang ke thepa e tsoang kantle ho naha, tšenyo ea maemo a mabe a metsi, lik'hemik'hale, kapa maemo afe kapa afe ao Khampani e ke keng ea a laola. Tiisetso ena e tla fediswa ke tlhekefetso efe kapa efe, tshebediso e mpe, tshebediso e mpe, ho kenngwa ka tsela e fosahetseng kapa tlhokomelo e sa lokang kapa ho fetolwa ha sehlahiswa.
• Linaha tse ling ha li lumelle meeli ea hore na tiisetso e boletsoeng e nka nako e kae, 'me Linaha tse ling ha li lumelle ho qheleloa ka thoko kapa ho beheloa meeli ea tšenyo e bakiloeng ke ntho e itseng. Ka hona, meeli e ka holimo e kanna ea se sebetse ho uena. Tiisetso ena e Lekanyelitsoeng e u fa litokelo tse khethehileng tsa molao, 'me u ka ba le litokelo tse ling tse fapaneng ho ea ka Naha. U lokela ho shebana le melao e sebetsang ea naha ho fumana litokelo tsa hau. HO FIHLELA HO FIHLELA HO THAMANA LE MOLAO O SEBELISANG MOLAO, LITIISETSO TSE FANG LE FEELA TSE KA SA HLAHLWANG, HO kenyeletswa LE DITIISETSO TSA BOKGWEBETSO LE HO TSHWANELA KA HO KHETHEHILENG, LI FELISITSOE KA NAKO EA SELEMO.

TS'ELISO

• USA:
  • T: 978-689-6066
  • Watts.com
• Canada:
  • T: 888-208-8927
  • Watts.ca
• Amerika boroa:
  • T: (52) 55-4122-0138
  • Watts.com

Litokomane / Lisebelisoa

WATTS 957-FS BMS Sensor Connection Kit [pdf] Buka ea Taelo 957-FS BMS Connection Kit, 957-FS, BMS Sensor Connection Kit, Sensor Connection Kit.

Litšupiso

• Bukana ea Mosebelisi