Vantron VT-MITX-APL Single Board Computer

Tlhahisoleseding ya Sehlahiswa

Lebitso la Sehlahiswa: VT-MITX-APL Single Board Computer

VT-MITX-APL Single Board Computer ke sehlahisoa se fanoang ke Vantron, mofani ea ka sehloohong oa lefats'e oa lihlahisoa le tharollo ea embedded/IoT. E etselitsoe ho fa basebelisi tharollo e matla le e fapaneng e kenelletseng ea komporo.

Phetolelo: 1.3

Mofuta oa hajoale oa Buka ea Mosebelisi ke 1.3. Phetolelo ena e kenyelletsa lintlha tse ntlafalitsoeng, lipalo tsa sebopeho, le leseli la fan.

Moetsi: Vantron Technology, Inc.

Vantron Technology, Inc. ke moetsi oa VT-MITX-APL Single Board Computer. Li fumaneha 48434 Milmont Drive, Fremont, CA 94538.

Tšehetso ea Theknoloji le Thuso

Haeba o hloka tšehetso ea tekheniki kapa thuso ka VT-MITX-APL Single Board Computer, o ka ikopanya le Vantron Technology, Inc. ka tsela e latelang:

• Mohala: 650-422-3128
• Lengolo-tsoibila: sales@vantrontech.com

Litaelo tsa Tšebeliso ea Sehlahisoa

Ketapele

Pele o sebelisa VT-MITX-APL Single Board Computer, ho bohlokoa ho bala le ho utloisisa Bukana ea Mosebelisi. Bukana ena e fana ka tataiso mabapi le ho theha, ho sebetsa le ho hlokomela sehlahisoa.

Basebelisi ba Reriloeng

K'homphieutha ea Boto e le 'ngoe ea VT-MITX-APL e etselitsoe basebelisi ba hlokang tharollo ea komporo e kentsoeng. E loketse tšebeliso ea botho le ea setsebi.

Copyright le Boitlhotlhollo

Le hoja tlhahisoleseding eohle e bukeng ena e 'nile ea hlahlojoa ka hloko bakeng sa ho nepahala, Vantron ha e nke boikarabelo leha e le bofe bakeng sa liphoso kapa tšebeliso e fosahetseng ea buka kapa software. Litlhaloso tsa sehlahisoa li ka fetoha ntle le tsebiso.

Symbology

Bukana ena e sebelisa matšoao a latelang ho thusa basebelisi ho ela hloko ka ho khetheha tlhahisoleseding e nepahetseng:

• Letšoao la tlhokomeliso le bontša tšenyo e ka bang teng ho sisteme kapa kotsi ho basebetsi.
• Letšoao la tlhokomelo le bontša lintlha tsa bohlokoa kapa melaoana
  seo se lokela ho latelwa.

Litaelo tse akaretsang tsa polokeho

Pele o sebelisa VT-MITX-APL Single Board Computer, ho bohlokoa ho boelaview litaelo tse akaretsang tsa polokeho tse fanoeng Bukeng ea Mosebelisi. Litaelo tsena li netefatsa ts'ebetso e sireletsehileng le e nepahetseng ea sehlahisoa.

Nalane ea Phetoho

Che.	Phetolelo	Tlhaloso	Letsatsi
1	V1.0	Tokollo ea pele	Nov. 5, 2021
2	V1.1	Lintlafatso tse ntlafalitsoeng	La 23 Mmesa, 2022
3	V1.2	Lipalo tsa li-interface tse ntlafalitsoeng	Nov. 20, 2022
4	V1.3	Lintlha tse ntlafalitsoeng tsa fan	La 19 Motšeanong 2023

Ketapele
Kea leboha ka ho reka komporo ea boto e le 'ngoe ea VT-MITX-APL ("Boto" kapa "Sehlahisoa"). Bukana ena e ikemiselitse ho fana ka tataiso le thuso e hlokahalang mabapi le ho theha, ho sebetsa kapa ho hlokomela Sehlahisoa. Ka kopo bala bukana ena 'me u netefatse hore u utloisisa tšebetso ea Sehlahisoa pele u se sebelisa.

Basebelisi ba Reriloeng

Bukana ena e reretsoe ho:

• Moqapi oa software o kentsoeng
• Moenjiniere oa software ea ntlafatso ea tloaelo
• Basebeletsi ba bang ba tšoanelehang ka botekgeniki

Copyright
Vantron Technology, Inc. (“Vantron”) e na le litokelo tsohle tsa bukana ena, ho kenyeletsoa le tokelo ea ho fetola litaba, foromo, likarolo tsa sehlahisoa, le lintlha tse fanoeng mona ka nako efe kapa efe ntle le tsebiso pele. Phetolelo ea morao-rao ea bukana ena e fumaneha ho www.vantrontech.com.
Matšoao a khoebo a bukeng ena, a ngolisitsoe kapa che, ke thepa ea beng ba ona. Ka tlas'a maemo afe kapa afe karolo ea bukana ena ea mosebelisi e tla kopitsoa, ​​e hlahisoe, e fetoleloe kapa e rekisoe. Bukana ena ha ea rereloa ho fetoloa kapa ho sebelisetsoa merero e meng ntle le haeba Vantron e lumelloa ka mokhoa o mong. Vantron e na le tokelo ea likopi tsohle tse lokollotsoeng phatlalatsa tsa bukana ena.

Boithorollo
Le hoja boitsebiso bohle bo fanoeng mona bo hlahlobiloe ka hloko ho netefatsa ho nepahala ha lintlha tsa theknoloji le typography, Vantron ha e nke boikarabelo leha e le bofe bo bakoang ke phoso leha e le efe kapa likarolo tsa buka ena, kapa ka tšebeliso e fosahetseng ea buka ena kapa software.
Ke tloaelo ea rona ho fetola linomoro tsa likarolo ha lintlha tse hatisitsoeng kapa likarolo li fetoloa, kapa ha ho etsoa liphetoho tse kholo tsa kaho. Leha ho le joalo, lintlha tse ling tsa Sehlahisoa li ka fetoloa ntle le tsebiso.

Tšehetso ea Theknoloji le Thuso
Haeba u na le potso efe kapa efe ka Sehlahisoa e sa kenyelletsoeng bukaneng ena, ikopanye le moemeli oa hau oa thekiso bakeng sa tharollo. Ka kopo, kenyelletsa lintlha tse latelang potsong ea hau:

• Lebitso la sehlahisoa le nomoro ea PO;
• Tlhaloso e feletseng ea bothata;
• Molaetsa oa phoso oo u o fumaneng, haeba o teng.

Litlhaloso tsa likarolo tsa Vantron Technology, Inc.
Aterese: 48434 Milmont Drive, Fremont, CA 94538
Mohala: 650-422-3128
Lengolo-tsoibila: sales@vantrontech.com

Symbology
Bukana ena e sebelisa matšoao a latelang ho susumetsa basebelisi ho ela hloko ka ho khetheha tlhahisoleseding e nepahetseng.

	Tlhokomeliso bakeng sa tšenyo e patehileng ea sistimi kapa kotsi ho basebetsi
	Ho ela hloko lintlha kapa melaoana ea bohlokoa

Litaelo tse akaretsang tsa polokeho

Sehlahisoa se tlameha ho kenngoa ke batho ba nang le tsebo, ba nang le tsebo, ba tsebang melao le melaoana ea motlakase ea lehae le/kapa ea machaba. Bakeng sa polokeho ea hau le thibelo ea tšenyo ea Sehlahisoa, ka kopo bala le ho ela hloko litaelo tse latelang tsa polokeho pele o kenya le ts'ebetso. Boloka bukana ena hantle bakeng sa tšebeliso ea nako e tlang.

• Se ke oa qhaqha kapa oa fetola Sehlahisoa ka tsela e 'ngoe. Ketso e joalo e ka baka mocheso, ho tima, ts'oaetso ea elektroniki, kapa ts'enyehelo e 'ngoe ho kenyelletsa le kotsi ea motho, 'me e ka hlakola waranti ea hau.
• Beha Sehlahisoa hole le mohloli oa mocheso, joalo ka hitara, sephalli sa mocheso, kapa casing ea enjine.
• Se ke oa kenya lisebelisoa tsa kantle ho pulo efe kapa efe ea Sehlahisoa kaha li ka etsa hore Sehlahiswa se senyehe kapa se tjhe.
• Ho netefatsa tshebetso e nepahetseng le ho thibela ho futhumala ho feteletseng ha Sehlahiswa, o seke wa kwahela kapa wa thibela masoba a moya a Sehlahiswa.
• Latela litaelo tsa ho kenya ka lisebelisoa tsa ho kenya tse fanoeng kapa tse khothalelitsoeng.
• Ts'ebeliso kapa ho beoa ha lisebelisoa tsa ts'ebetso ho tla tsamaisana le melao ea ts'ebetso ea lisebelisoa tse joalo ho qoba potoloho e khuts'oane ea Sehlahisoa.
• Khaola matla pele ho tlhahlobo ea Sehlahisoa ho qoba kotsi ea batho kapa tšenyo ea sehlahisoa.

Litlhokomeliso bakeng sa Lithapo tsa Matla le Lisebelisoa

Sebelisa mohloli o nepahetseng oa matla feela. Etsa bonnete ba hore phallo e ngatatage oela ka har'a mefuta e boletsoeng.
Beha likhoele hantle libakeng tse se nang likotsi tsa extrusion.
Ho na le betri ea sele ea tšepe bakeng sa ho matlafatsa RTC. Ka hona, ka kopo qoba potoloho e khuts'oane ea betri nakong ea lipalangoang kapa ts'ebetsong ka mocheso o phahameng.

Ho hloekisa litaelo:

• Tima pele o hloekisa Sehlahiswa
• U se ke ua sebelisa sesepa sa spray
• Hloekisa ka papatsoamp lesela
• U se ke ua leka ho hloekisa lisebelisoa tsa elektronike tse pepenene ntle le haeba u e-na le 'mokelli oa lerōle

Tlosa 'me u ikopanye le moenjiniere oa tšehetso ea tekheniki ea Vantron haeba ho ka ba le liphoso tse latelang:

• Sehlahisoa se senyehile
• Mocheso o phahame ka ho feteletseng
• Phoso e ntse e sa rarolloe ka mor'a ho rarolla mathata ho latela bukana ena

Se ke oa sebelisa tikolohong e tukang le e qhomang:

• Qoba hole le tikoloho e tukang le e phatlohang
• Qoba hole le lipotoloho tsohle tse nang le matla
• Ho tlosoa ka mokhoa o sa lumelloeng ha sebaka se koaletsoeng sesebelisoa ha ho lumelloe
• Se ke oa fetola likarolo ntle le haeba thapo ea motlakase e sa koaloa
• Maemong a mang, sesebelisoa se ntse se ka ba le matla a setsengtage le haeba thapo ea motlakase e sa hokahanngoa. Ka hona, hoa hlokahala ho tlosa le ho ntša sesebelisoa ka botlalo pele ho nkeloa sebaka sa likarolo

LIEKETSENG

Sehlahisoa se Felletseview

K'homphieutha e le 'ngoe ea VT-MITX-APL e khomarela litekanyetso tsa boholo ba indasteri ea machaba e nang le 170mm x 170mm form factor. E tsamaisoa ke Intel® Celeron® APL-N3350 quad core processor, 'me bareki ba na le khetho pakeng tsa Windows 10 le lisebelisoa tsa Linux. Khomphuta ya boto e le nngwe e tshehetsa dipontsho tsa dikanale tse ngata le thekenoloji e phahameng ya tlhaloso ya dikhouto le dikhouto ho fana ka boiphihlelo bo hlahelletseng ba pono. Ho betere, e fana ka lihokelo tse ngata tsa boto le likhetho tsa katoloso ea bareki ho kopana le maemo a fapaneng a ts'ebeliso ho kenyelletsa mabenkele a bohlale, liteishene tsa ho itšebeletsa, li-automation tsa indasteri, bophelo bo botle ba bongaka bo bohlale, le mecha ea litaba ea dijithale.
E na le maemo a phahameng a ho feto-fetoha ha maemo le ts'ebetso e phahameng, letlapa la bo-mme le ka sebetsa tlas'a maemo a feteletseng le mocheso o atolositsoeng ho tloha -20 ℃ ho ea ho +60 ℃, e leng se etsang hore e be tharollo e tšepahalang ea IoT ea indasteri.

Terminology/Acronym

Terminology/Acronym	Tlhaloso
NC	Ha ho khokahano
VCC	Moqtage tloaelehileng 'mokelli
GND	Fatše
P (+)	Sesupo se setle sa phapang
N (-)	Letshwao le fosahetseng la phapang
#	Lets'oao le tlase le sebetsang
I	Kenyeletso
O	Sephetho
I/O	Kenyeletso/sephetho
P	Matla kapa mobu
A	Analoge
OD	Open drain
PCIe	Letšoao la PCI Express
MDI	Sehokelo se itšetlehileng ka mecha ea litaba
BKL	Taolo ea backlight

Setšoantšo se Thibeloang

Litlhaloso

VT-MITX-APL
Tsamaiso	CPU	Intel® Celeron®, APL-N3350, Quad-core processor, 2.4GHz (Max.) (Boikhethelo: N4200)
	Mohopolo	DDR3L SO-DIMM socket, 1866 MHz, ho fihla ho 8GB
	Polokelo	1 x SATA 3.0
Puisano	Ethernet	2 x RJ45, 10/100/1000Mbps
Mecha ea litaba	Pontšo	1 x HDMI 1.4b, 3840 x 2160 @30Hz 1 x Dual-channel LVDS, 1920 x 1200 @30Hz 1 x VGA, 1920 x 1200 @60Hz
	Audio	1 x 3.5mm Jack ea molumo 1 x 3.5mm Mic jack	1 x Sehokelo sa molumo 2 x Sehokedi sa sebui
Ke / Os	Seriale	2 x RS232 sehokelo	2 x RS232/RS422/RS485 sehokelo
	USB	2 x USB 2.0 Mofuta oa A 2 x USB 3.0 Mofuta oa A	4 x USB 2.0 e hahiloeng
	GPIO	8 x GPIO
	SMBus	1 x SMBus
	RTC	E tšehelitsoe
	Ba bang	1 x PS/2 sehokelo	2 x Sehokelo sa fan se tloaelehileng
Katoloso	Sekotjana	1 x Full Mini-PCIe bakeng sa 4G e nang le sekotjana sa SIM 1 x M.2 B-key (2242, PCIe x4/SATA bakeng sa katoloso ea SSD, kapa 3052, PCIe x1/USB3.1 bakeng sa katoloso ea 5G) 1 x M.2 E-key (2230, PCIe x1/USB 2.0 bakeng sa katoloso ea Wi-Fi & BT)
Tshireletso	TPM	1 x TPM
Tsamaiso ea Tsamaiso	Konopo	1 x konopo e tloaelehileng ea matla/ho seta bocha
	Sesupo	1 x Boemo ba LED
Matla	Kenyeletso	12V DC
		1 x Jack ea motlakase	1 x Sehokelo sa matla (2 x 2 x 4.2mm)
	Tshebediso	10W+
Software	Mokhoa oa tšebetso	Windows 10, Linux
	Sesebelisoa sa OTA	BlueSphere OTA
Mechini	Litekanyo	MITX boto e tloaelehileng, 170mm x 170mm
	Ho qhala mocheso	2 x Sehokelo sa fan
Boemo ba Tikoloho	Mocheso	E sebetsa: -20 ℃~+60 ℃
	Mongobo	RH 10%-85% (Ha e kolekese)
	Setifikeiti	RoHS

Mokhoa oa tšebetso

VT-MITX-APL e tšehetsa Windows 10 le lits'ebetso tsa ts'ebetso tsa Linux.

Mechanical Dimensions

• 170mm x 170 limilimithara

Phepelo ea Matla le Tšebeliso

VT-MITX-APL e sebetsa ka matla a +12V DC a fanoang ke sehokelo sa motlakase kapa jeke ea motlakase.
Boto e sebelisa 10W + (ntle le libui) ea matla kapa 40W + (e nang le libui) tsa matla. Ho lokela ho hlakisoe hore tšebeliso ea matla e khethoa haholo ke RAM, matla a polokelo, le litlhophiso tse ling tsa boto.

Litlhaloso tsa Tikoloho

VT-MITX-APL e sebetsa mochesong o tlohang ho -20℃ ho ea ho +60℃ le mongobo o lekanyelitsoeng oa 5% -95% bakeng sa morero o sa koaheleng.

LIKHOKANG LE PIN KABELO

Sebopeho sa Sehlahisoa

Boto ea I/Os e tla hlalosoa ka botlalo ho 2.4 Connectors and Jumpers ho latela linomoro tsa tatellano tse fanoeng mona.

Mohopolo

VT-MITX-APL e na le sokete ea DDR3L SO-DIMM e tšehetsang ho fihla ho 8GB RAM.

Boitsebiso ba Pin 1

Ntle le ha ho boletsoe ka tsela e 'ngoe, phini ea 1 ea sehokelo e lutse holim'a letlapa la lisekoere le fapaneng le liphaephe tse chitja tse sebelisetsoang liphini tse ling. Ka nako e 'ngoe, phini ea 1 e haufi le letšoao la khutlo-tharo holim'a boto. Ha ho e-na le mela e 'meli ea lithakhisa holim'a sehokelo, mola o nang le pin 1 o entsoe ka linomoro tse sa tloaelehang 'me e 'ngoe e entsoe ka linomoro tse lekanang. Hangata, ho tla ba le linomoro kapa matšoao pel'a lithakhisa tsa sehokelo boto ho bontša li-pinouts.

Lihokelo le Li-Jumpers

Karolo ena e tla akaretsa lihokelo/ba tlohang ho Boto ka tlhaloso e lumellanang ea pinout.

Motlakase (1)

Jack ea matla e tšehetsa phepelo ea motlakase ea 12V DC, 'me ea hajoale e khothaletsoang ke 1.5A.

Sehokelo sa J5 Power (2)

Litlhaloso: 2 x 2 x 4.2mm, 12.8mm (H), E motona, E theohileng, E tšoeu, WDT, THR, RoHS Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	GND	P	Fatše
2	GND	P	Fatše
3	+ VDC	P	DC-IN MATLA +
4	+ VDC	P	DC-IN MATLA +

Sehokelo sa J16/J17 Ethernet (3)

Tlhaloso: RJ45, e tšehetsang 10M/100M/1000M Base-T, LED: LY; RG

Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	L_MDI_0P	IO	Ethernet MDI0+ Letšoao
2	L_MDI_0N	IO	Ethernet MDI0- Letšoao
3	L_MDI_1P	IO	Ethernet MDI1+ Letšoao
4	L_MDI_1N	IO	Ethernet MDI1- Letšoao
5	L_MDI_2P	IO	Ethernet MDI2+ Letšoao
6	L_MDI_2N	IO	Ethernet MDI2- Letšoao
7	L_MDI_3P	IO	Ethernet MDI3+ Letšoao
8	L_MDI_3N	IO	Ethernet MDI3- Letšoao

Sehokelo sa J6 LVDS (4)

Litlhaloso: 2 x 15 x 2.0mm, 1.5A, 6mm (H), Monna, Mothehi, WDT, SMT, RoHS Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	VDD_LCD	P	LCD MATLA +5V
2	VDD_LCD	P	LCD MATLA +5V
3	VDD_LCD	P	LCD MATLA +5V
4	NC
5	LCD_DETECT_R	I	LVDS LEMOHANG
6	SEL 6/8	O	KHETHA 6 KAPA 8 BOTEBO
7	LVDS_A_D0-_R	O	LVSDO_DATA
8	LVDS_A_D0+_R	O	LVSDO_DATA
9	LVDS_A_D1-_R	O	LVSDO_DATA
10	LVDS_A_D1+_R	O	LVSDO_DATA

11	LVDS_A_D2-_R	O	LVSDO_DATA
12	LVDS_A_D2+_R	O	LVSDO_DATA
13	GND	P	Fatše
14	GND	P	Fatše
15	LVDS_A_CLK-_R	O	LVSDO_CLOCK
16	LVDS_A_CLK+_R	O	LVSDO_CLOCK
17	LVDS_A_D3-_R	O	LVSDO_DATA
18	LVDS_A_D3+_R	O	LVSDO_DATA
19	LVDS_B_D0-/TX0-	O	LVSAE_DATA
20	LVDS_B_D0+/TX0+	O	LVSAE_DATA
21	LVDS_B_D1-/TX1-	O	LVSAE_DATA
22	LVDS_B_D1+/TX1+	O	LVSAE_DATA
23	LVDS_B_D2-/TX2-	O	LVSAE_DATA
24	LVDS_B_D2+/TX2+	O	LVSAE_DATA
25	GND	P	Fatše
26	GND	P	Fatše
27	LVDS_B_CLK-/AUX-	O	LVSAE_CLOCK
28	LVDS_B_CLK+/AUX+	O	LVSAE_CLOCK
29	LVDS_B_D3-/TX3-	O	LVSAE_DATA
30	LVDS_B_D3+/TX3+	O	LVSAE_DATA

Sehokelo sa J10 LCD BKL (5)

Litlhaloso: 1 x 6, 2.0mm, 2A, 6mm (H), Monna, Motheo, WDT, THR, RoHS Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	VCC_BLK	P	LCD BACKLIGHT MATLA +12V
2	VCC_BLK	P	LCD BACKLIGHT MATLA +12V
3	LCD_BKLTEN	P	LCD BACKLIGHT NTLETSA
4	LCD_BKLT_PWM	O	LCD BACKLIGHT PWM
5	GND	P	Fatše
6	GND	P	Fatše

U17 HDMI (6)

Litlhaloso: Mofuta oa A, FLN, E tšehali, lehlakoreng le letona, WDT, SMT, RoHS Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	HDMI_DATA2+	O	HDMI DATA
2	GND	P	Fatše
3	HDMI_DATA2-	O	HDMI DATA
4	HDMI_DATA1+	O	HDMI DATA
5	GND	P	Fatše
6	HDMI_DATA1-	O	HDMI DATA
7	HDMI_DATA0+	O	HDMI DATA
8	GND	P	Fatše
9	HDMI_DATA0-	O	HDMI DATA
10	HDMI_CLK+	O	HDMI CLK
11	GND	P	Fatše
12	HDMI_CLK-	O	HDMI CLK
13	NC
14	NC
15	HDMI_DDC_SCL	IO	HDMI DDC I2C CLK
16	HDMI_DDC_SDA	IO	DATA ea HDMI DDC I2C
17	GND	P	Fatše
18	VCC_HDMI	P	HDMI MATLA +5V
19	HDMI_HPD	I	TLHOKOMELO EA HDMI HOT PLUG

J11 VGA (7)

Tlhaloso: DB15, 1 Port, NUF, Female, Right angle, WDT, SMT, RoHS Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	VGA_R	O
2	VGA_G	O
3	VGA_B	O
4	NC
5	GND	P	Fatše
6	GND	P	Fatše
7	GND	P	Fatše
8	GND	P	Fatše
9	+V5_CRT	P	MATLA +5V
10	GND	P	Fatše
11	NC
12	VGA_DDC_DATA	O
13	VGA_HS	O
14	VGA_VS	O
15	VGA_DDC_CLK	O	VGA CLK

J19/J18 RS232 boema-kepe (8)

VT-MITX-APL e sebelisa likou tse peli tsa serial tsa RS232.
Litlhaloso: 2 x 5 x 1.5mm, 5.75mm (H), E motona, E otlolohileng, e Ntšo, WDT, THR, RoHS Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	DCD4_L	P	MATLA
2	RXD4_L	I	RS232_RXD
3	TXD4_L	O	RS232_TXD
4	DTR4	I/O	DTR4
5	GND	P	Fatše
6	EA-4-DS	I/O	EA-4-DS
7	RTS4	I/O	RTS4
8	CTS4	I/O	CTS4
9	RI4_L	I/O	RI4_L

J20/J21 RS232/RS422/RS485 koung (9)

Haufi le likou tse peli tsa serial tsa RS232 ho na le likou tse ling tse peli tsa serial tse sebelisoang e le RS232/RS422/RS485.
Litlhaloso: 2 x 5 x 1.5mm, 5.75mm (H), E motona, E otlolohileng, e Ntšo, WDT, THR, RoHS Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	RS485_A/422TX+	IO	RS485_P
2	RS485_B/422TX-	IO	RS485_N
3	422RX+	IO	DATA
4	422RX-	IO	DATA
5	GND	P	GND
6	EA-1-DS	IO	DATA
7	RTS1	IO	DATA
8	CTS1	IO	DATA
9	RI1_L	IO	DATA

J39 GPIO (10)

VT-MITX-APL e sebelisa sehokelo sa GPIO, se fanang ka matšoao a 8 GPIO.
Litlhaloso: 2 x 5, 2.0mm, 1.5A, 4mm (H), Monna, Motheo, WDT, THR, RoHS

Tlhaloso ea pinout:

Pin	Letshwao	Mofuta	Tlhaloso
1	GPIO_0_3.3V	IO	GPIO
2	GPIO_1_3.3V	IO	GPIO
3	GPIO_2_3.3V	IO	GPIO
4	GPIO_3_3.3V	IO	GPIO
5	GPIO_4_3.3V	IO	GPIO
6	GPIO_5_3.3V	IO	GPIO
7	GPIO_6_3.3V	IO	GPIO
8	GPIO_7_3.3V	IO	GPIO
9	GND	IO	GPIO
10	VCC_GPIO	IO	+3.3V/+5V MATLA

J40 Power/seta sehokelo bocha (11)

Litlhaloso: 2 x 4, 2.54mm, 2A, 6mm (H), Monna, Motheo, WDT, THR, RoHS Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	SATA_ACT+	IO	SATA_ACT+
2	LED_MATLA	O	LED_MATLA
3	SATA_ACT#	IO	SATA_ACT+
4	GND	P	GND

5	GND	P	GND
6	PBTN_IN#	I	Konopo ea Matla
7	SYS_REST#	I	SYS_REST
8	GND	P	GND

J25 M.2 B-Key slot (12)

VT-MITX-APL e sebelisa M.2 B-Key e tšehetsang boholo ba 2242 'me e lumellana le PCIe x4/SATA ho hokahanya SSD bakeng sa phetisetso e kholo ea data le polokelo. Sekotjana se boetse se tšehetsa boholo ba 3052 'me se lumellana le PCIe x1/USB 3.1 ho hokahanya mojule oa 5G bakeng sa puisano e potlakileng ea waelese.
Tlhaloso: Key B, 75P, 0.5mm, 6.7mm (H), WDT, SMT, RoHS
Pinout ea slot ea M.2 B-Key e tsamaellana le kabelo ea phini ea sekotjana se tloaelehileng sa M.2 bakeng sa Key B.

J24 M.2 E-Key slot (13)

VT-MITX-APL e sebelisa M.2 E-Key (2230) e sebeletsanang le PCIe x1/USB 2.0 ho hokela mojule oa Wi-Fi & BT bakeng sa puisano e se nang mohala.
Tlhaloso: Key E, 75P, 0.5mm, 6.7mm (H), WDT, SMT, RoHS
Pinout ea slot ea M.2 E-Key e tsamaellana le kabelo ea phini ea M.2 e tloaelehileng bakeng sa Key E.

J23 Mini PCIe slot (14)

VT-MITX-APL e boetse e sebelisa sekotjana sa PCIe se senyane bakeng sa mojule oa 4G/LTE.
Tlhaloso: Mini PCIe, 52P, 0.8mm, 6.8mm (H), WDT, SMT, RoHS
Pinout ea sekotjana sa PCIe e nyane e tsamaellana le kabelo ea phini ea sekotjana se tloaelehileng sa PCIe.

Sehokelo sa J16 SATA (15)

Sehokelo sa SATA se etselitsoe ho hokahanya sesebelisoa sa polokelo bakeng sa katoloso ea matla. Tlhaloso: 7-pin, 1.27mm, 8.4mm (H), WDT, SMT, RoHS
Pinout ea sehokelo sa SATA e tsamaellana le kabelo ea phini ea boema-kepe bo tloaelehileng ba SATA.

Sehokelo sa matla sa J17 SATA (16)

VT-MITX-APL e sebelisa sehokelo sa matla a 4-pin ho fana ka matla ho sesebelisoa sa SATA.
Litlhaloso: 1 x 4, 2.54mm, 2A, 6mmH, Monna, Motheo, WDT, THR, RoHS

Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	+V5_S	P	MATLA +5V
2	GND	P	Fatše
3	GND	P	Fatše
4	+V12_S	P	MATLA +12V

Boema-kepe ba J29 USB 2.0 (17)

VT-MITX-APL e fana ka likou tse peli tsa USB 2.0 tse etselitsoeng ho hokela li-peripheral ho atolosa mesebetsi.
Tlhaloso: 2.0, Type-A, E tšehali, Right angle, Retention, WDT, THR, RoHS Pinaut ea boema-kepe ba USB 2.0 e tsamaellana le kabelo ea phini ea sehokelo se tloaelehileng sa USB 2.0.

Boema-kepe ba U46 USB 3.0 (18)

VT-MITX-APL e fana ka likou tse peli tsa USB 3.0 bakeng sa katoloso ea mesebetsi.
Litlhaloso: 3.0, Type-A, E tšehali, 17.5mm (L), lehlakoreng le letona, WDT, THR, RoHS

Pinaut ea boema-kepe ba USB 3.0 e tsamaellana le kabelo ea phini ea sehokelo se tloaelehileng sa USB 3.0.

J31/J33 USB2.0 hlooho ea phini (19)

Boto e sebelisa lihlooho tse peli tsa li-pin tsa USB ho lumella basebelisi bakeng sa nts'etsopele ea moetlo.
Litlhaloso: 2 x 5, 2.54mm, 2A, 6mm (H), Monna, Motheo, WDT, THR, RoHS

Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	VCC_USB2.0_HDR	P	MATLA a USB +5V
2	VCC_USB2.0_HDR	P	MATLA a USB +5V
3	HUB_USB4N	IO	E bolokiloe usb2.0 Negative
4	HUB_USB3N	IO	E bolokiloe usb2.0 e ntle
5	HUB_USB4P	IO	E bolokiloe usb2.0 Negative
6	HUB_USB3P	IO	E bolokiloe usb2.0 e ntle
7	GND	P	Fatše
8	GND	P	Fatše
10	NC

Sehokelo sa J3 SMBUS (20)

Litlhaloso: 1 x 4,1.25mm, 1A, 4.6mm (H), Monna, Mothehi, THR, RoHS Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	+V3.3_A	P	MATLA
2	SMB_SCL_3.3V	O	SMB_SCL
3	SMB_SDA_3.3V	O	SMB_SDA
4	GND	P	Fatše

Sehokelo sa J38 Debug (21)

VT-MITX-APL e sebelisa sehokelo sa debug bakeng sa ho rarolla mathata le ho rarolla mathata. Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	LPC_FRAME#	IO	LPC
2	LPC_AD3	IO	LPC
3	LPC_AD2	IO	LPC
4	LPC_AD1	IO	LPC
5	LPC_AD0	IO	LPC
6	GND	P	Fatše
7	LPC_CLK1_25M	IO	LPC
8	+V3.3_A	P	+ 3.3V MATLA

Jeko ea molumo ea J12 (22)

Tlhaloso: 3.5mm, 5-pole, Female, Right angle, THR, RoHS

Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	GND	P	Fatše
2	HPOUT_L_CRL	O	AUDIO JACK LETSOA LENTSOE
3	HPOUT_R_CRL	O	AUDIO JACK LENTSOE LE LOKILE
4	ALOUT_L_SPEAKER	I	LETS'ELISO SEBUI
5	ALOUT_R_SPEAKER	I	TOKELO SEBUI

Jeke ea maekerofounu ea J14 (23)

Tlhaloso: 3.5mm, 5-pole, Female, Right angle, THR, RoHS Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	GND	P	Fatše
2	MIC1_RRR	I	MIC TOKELO MOHAPI
3	MIC1_LLL	I	MIC LETS'ELISITSOE
4	GND	P	Fatše
5	MIC_JD	I	JD KENYA

Sehokelo sa Sebui sa J13 (24)

Litlhaloso: 1 x 4, 2.54mm, 4A, 10.8mm (H), Monna, Mothehi, THR, RoHS Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	OUTPL+	O	8R/15W SPEAKER ANODE
2	OUTPL-	O	8R/15W SPEAKER CATHODE
3	OUTPR-	O	8R/15W SPEAKER CATHODE
4	OUTPR+	O	8R/15W SPEAKER CATHODE

Sehokelo sa audio sa J50 se ka pele (25)

Litlhaloso: 2 x 5, 2.54mm, 3A, 6mm (H), Monna, Mothehi, THR, RoHS Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	MIC2_LLL	I	MIC LETS'ELISITSOE
2	GND	P	Fatše
3	MIC2_RRR	I	MIC TOKELO MOHAPI
4	NC
5	RINP_AMP2	O	AMP2 KENETSO E NEPAHETSENG
6	MOL2_JD	I	MOKHOA OA MIC2 JD
7	GND	P	Fatše
9	LINP_AMP2	O	AMP2 KELETSO E LEBELENG
10	HP2_JD	I	MOKHOA OA HP2 JD

Sehokelo sa B1 RTC (26)

Tlhaloso: 24mm (D), E tšehali, lehlakoreng le letona, WDT, THR, RoHS Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	BAT_PWR	P	RTC +
2	GND	P	RTC -

J38 PS/2 (27)

VT-MITX-APL e sebelisa sehokelo sa PS/2 ho hokela keyboard kapa toeba.
Litlhaloso: 1 x 6, 2.0mm, 2A, 6mm (H), Monna, Motheo, WDT, THR, RoHS

Tlhaloso ea pinout:

Pin	Lebitso	Mofuta	Tlhaloso
1	L_KBD_CLK	IO	KBD_CLK
2	L_KBD_DATA	IO	KBD_DATA
3	L_MOUSE_CLK	IO	MOUSE_CLK
4	GND	P	Fatše
5	PS_5V	P	+ 5V MATLA
6	L_MOUSE_DATA	IO	MOUSE_DATA

DDR3L SO-DIMM sokete (28)

VT-MITX-APL e fana ka sokete ea DDR3L SO-DIMM, e khonang ho tšehetsa li-module tsa memori tse nang le maqhubu a mangata a 1866 MHz le ho fihla ho 8GB ea matla a memori.

Sekotjana sa SIM (29)

Ho na le sekotjana sa SIM ho Boto, se e lumellang ho buisana ntle le mohala ka marang-rang a cellular le ho theha khokahano e sireletsehileng ea data.

Lihokelo tsa J36/J37 Fane (30)

VT-MITX-APL e sebelisa lihokelo tse peli tsa fan, e 'ngoe (J37) ke ho hokahanya fan ho fana ka phepelo e sebetsang ea mocheso bakeng sa sistimi,' me e 'ngoe (J36) ke sehokelo sa fan sa CPU bakeng sa ho pholisa CPU.
Litlhaloso: 1 x 4, 2.54mm, 4A, 11.4mm (H), Monna, Motheo, WDT, THR, RoHS

Tlhaloso ea pinout ea J36:

Pin	Letshwao	Mofuta	Tlhaloso
1	GND	P	Fatše
2	PHEPO YA BARATI_+V12	P	+ 12V MATLA
3	CPU_TACHO_R_FAN	IO	MOHLASI LEBELO LEBAKA
4	FAN_CONN_PWM_IN	IO	TAOLOANE LEBELO LA FANE
Tlhaloso ea pinout ea J37:
Pin	Letshwao	Mofuta	Tlhaloso
1	GND	P	Fatše
2	PHEPO YA BARATI_+V12	P	+ 12V MATLA
3	NA
4	+V5S	IO	TAOLOANE LEBELO LA FANE

SEBELISA PELE KHOLO

Serial phetolo

VT-MITX-APL e sebelisa li-connectors tse 4 tse tsejoang e le COM1 ~ COM4 ke mookameli oa lisebelisoa tse bontšitsoeng ka tsela e latelang.

Likou tse bontšitsoeng mona li kanna tsa se ts'oane le tse boletsoeng ke molaoli oa sesebelisoa sa hau, ka hona, ka kopo ela hloko mefokolo leha e le efe. Ho khetholla lipakeng tsa likou, hokela kou e le 'ngoe ea serial ho PC e amohelang ka nako.
Tabeng ena, COM1 le COM2 li tšehetsa RS232, RS485, RS422 protocol, le COM3 le COM4 li tšehetsa RS232 protocol. COM1 ~ COM4 e lumellana le boema-kepe ba serial A, B, C, D ho sistimi ea BIOS.
Haeba u lakatsa ho fetola mokhoa oa COM1 le COM2,

1. Kenya BIOS;
2. Tobetsa Motsamaisi oa Sesebelisoa> SIO SCH3222;
3. Tsamaisa sesupa ho Serial Port A / Serial Port B> Mode, 'me u sebelise metsu ea holimo le tlase ho fetola mokhoa;
4. Tobetsa F10 ho boloka le ho tsoa.

Joale u ka sebelisa sesebelisoa sa TestCommPC Vxxx bukeng ea SW Guide> Teko ea COM ka har'a sephutheloana sa tokollo bakeng sa serial debugging.

GPIO Setupong

VT-MITX-APL e sebelisa lithakhisa tse 8 tsa GPIO tse nang le lintlha tse bontšitsoeng ka tlase:

Lebitso	Mokhoa oa kamehla	Boemo ba kamehla
GPIO_0	Sephetho	Phahameng
GPIO_1	Kenyeletso	/
GPIO_2	Sephetho	Phahameng
GPIO_3	Kenyeletso	/
GPIO_4	Sephetho	Phahameng
GPIO_5	Kenyeletso	/
GPIO_6	Sephetho	Phahameng
GPIO_7	Kenyeletso	/

U ka sebelisa GPIO Sample.exe tlas'a bukana ea SW Guide> GPIO Test> GPIO Sample ka har'a sephutheloana sa tokollo bakeng sa debugging ea GPIO (ho sebetsa joalo ka motsamaisi).Setšoantšong se ka holimo:

1. GpioPins: U ka khetha pinana ea hlooho ea GPIO ho tsoa lethathamong le theoha bakeng sa tlhophiso;
2. Tsoa: Beha mokhoa oa pini e khethiloeng ea GPIO e le tlhahiso (e hlahlojoe) / kenya (e sa hlahlojoe);
3. Holimo: Beha boemo ba pinana ea GPIO e khethiloeng e le holimo (e hlahlojoe) / tlase (e sa hlahlojoe).
   Ka kopo tsamaisa lenaneo lena joalo ka motsamaisi.

E nolofalletsa Watchdog Timer

Haeba o hloka ho nolofalletsa Watchdog Timer,

1. Kenya BIOS;
2. Tobetsa Motsamaisi oa Sesebelisoa> SIO SCH3222;
3. Tsamaisa cursor ho WDT> Noble (E holofetse ka ho sa feleng), ebe u beha Mokhoa oa ho Bala le Counter (bolelele ba nako);
   • Counter e tla behoa ho feta 80 haeba Mokhoa oa ho Bala e le oa bobeli;
   • Counter e tla beoa ho feta 3 haeba Mokhoa oa ho Bala e le motsotso;
4. Tobetsa F10 ho boloka litlhophiso;
5. Tobetsa Ctrl + Alt + Delete ho qala sistimi hape ho etsa hore litlhophiso li sebetse.

4 BIOS LE lifensetere

Kenyelletso ea BIOS

BIOS e qala lisebelisoa tse kang CPU le memori, 'me e boloka litlhophiso tsa hardware bakeng sa ho kenya le ho kenya tsamaiso ea tsamaiso (OS).
Basebelisi ba kanna ba hloka ho tsamaisa lenaneo la BIOS Setup ha:

• Ho hlaha molaetsa oa phoso o fanang ka maikutlo a hore mosebelisi a tsamaise BIOS Setup;
• Li-setting tsa kamehla li hloka ho hlophisoa.
  Ka kopo hlokomela hore BIOS e tla lula e ntlafatsoa bakeng sa ts'ebetso e ntle ea sistimi, ka hona, tlhaloso e khaolong ena e ka fapana hanyane mme ke ea litšupiso feela.

Etsa bonnete ba hore o hokela keyboard, mouse le pontšo ho Boto pele o tsoela pele ka ts'ebetso efe kapa efe.

Sheba mofuta oa BIOS

Boto e tšehetsa sistimi e sebetsang ea Windows. U ka sheba mofuta oa BIOS oa Boto tsamaisong ea Windows ho latela mehato e latelang:

1. Tobetsa "Win + R" ho keyboard ho letsetsa lebokose la taelo;
2. Kenya msinfo32 lebokoseng la litaelo ebe o tobetsa "OK" ho netefatsa;
3. Tsamaea ho BIOS Version/Date leqepheng le bulehileng ho sheba lintlha tse qaqileng.

Ho theha BIOS

Ho kenya Setupo

Matla ho Boto le sistimi e tla qala ts'ebetso ea ho itlhahloba ka matla. Ebe o tobetsa konopo ea ESC ho kenya leqephe la tlhophiso ea BIOS (leqephe le ka pele) joalo ka ha ho bonts'itsoe ka tlase. Tlhaloso ea likhetho:

Khetho	Tlhaloso
Tsoela pele	Tsoela pele ka mokhoa oa ho qala
Motsamaisi oa Boot	View lisebelisoa tsohle tsa boot, ho kenyelletsa le li-drive tsa USB, SSD, joalo-joalo.
Boot Ho tloha File	Khetha ho qala ho tloha ka hare file, feela bakeng sa karohano ea EFI
Laola Boot e sireletsehileng	Lokisa ts'ebetso e sireletsehileng ea boot, 'me u nolofalletse / tima bootle bo sireletsehileng
Seta Utility	Fetileview ea likhetho tsohle tsa ho seta BIOS. O lokela hoba haholo hlokolosi ha u fetola li-setting tsa kamehla.

Boot e sireletsehileng

Secure Boot e itšetlehile ka firmware 'me e hloka hore BIOS ea khomphuta e behoe ho UEFI mode. E emisitsoe ka ho sa feleng.

1. Matla ho Boto ebe o tobetsa ESC ho kenya BIOS;
2. Khetha Laola Boot e sireletsehileng leqepheng le ka pele;
3. Beha Hlakola Litlhophiso tsohle tsa Sireletsehile tsa Boot 'me u Khutlise Boot e Sireletsehileng ho Litlhophiso tsa Fektheri ho Nolofalloa;
4. Tobetsa F10 ho boloka le ho tsoa;
5. Ho tla ba le lebokose la puisano le bontšang hore tsamaiso e tla tsosolosoa. Tobetsa OK, 'me tsamaiso e tla qala hape;
6. Haeba o hloka ho tima Secure Boot kamora moo, beha Enforce Secure Boot to Disabled.

Sheba Secure Boot State tsamaisong ea Windows:

1. Tobetsa "Win + R" ho keyboard ho letsetsa lebokose la taelo;
2. Kenya msinfo32 lebokoseng la litaelo ebe o tobetsa "OK" ho netefatsa;
3. Tsamaea ho BIOS Mode le Sireletsehile Boot State leqepheng le bulehileng ho hlahloba lintlha tse qaqileng.

Sebelisa linotlolo tsa motsu oa holimo le tlase ho keyboard ho kenya BIOS Setup Utility, e nang le menyetla e latelang bareng ea menyetla:

• Ka sehloohong (litlhophiso tsa mantlha tsa sistimi, joalo ka mofuta oa BIOS, tlhaiso-leseling ea processor, puo ea sistimi, nako ea sistimi le letsatsi)
• E tsoetseng pele (litlhophiso tse tsoetseng pele ho lumella basebelisi ho etsa sistimi)
• Ts'ireletso (litlhophiso tsa ts'ireletso ea sistimi moo basebelisi ba ka behang li-password tsa mookameli)
• Matla (litlhophiso tsa matla a CPU bakeng sa morero oa taolo ea matla)
• Boot (likhetho tsa boot system)
• Tsoa (moroalo oa BIOS kapa likhetho tsa ho tsoa ka kapa ntle le liphetoho tse bolokiloeng)

Ka sehloohong

• Puo: U ka khetha ho tsoa ho Senyesemane, Sefora, Sechaena le Sejapane bakeng sa puo ea sistimi.
• Nako ea Tsamaiso: Sebopeho sa nako ke : : .
• Letsatsi la Tsamaiso: Foromo ea letsatsi ke / / .

E tsoetseng pele

• Boot Configuration: U ka khetha sistimi eo u ka ratang hore Boto e sebetse ho eona.
• Tlhophiso ea Uncore: U ka etsa litlhophiso tsa video, li-setting tsa GOP, li-setting tsa IGD, le li-setting tsa sesebelisoa sa IPU PCI mona.
• South Cluster Configuration: Leqephe lena le fana ka likhetho tsa tlhophiso bakeng sa molumo, GMM, ISH, LPSS, PCIe, SATA, SCC, USB, Timer, joalo-joalo.
• Tlhophiso ea Ts'ireletso: Litlhophiso tsa sesebelisoa sa TPM li entsoe mona.
• Tlhophiso ea Thermal: Litlhophiso tsa taolo ea Thermal li etselitsoe mona.
• Karolo ea Tsamaiso: Litlhophiso tsa li-clock spectrum li ka fumaneha ho tloha mona.
• Debug Configuration: O ka nolofalletsa / tima debugger mona.
• Tlhophiso ea Sistimi ea Memori: O ka nolofalletsa / tima "memory scrambler" le litlhophiso tse ling tse amanang le memori mona.
• Tafole ea ACPI / Taolo ea Likarolo: Khetho ena e u lumella ho nolofalletsa / ho tima S4 wakeup ho tsoa ho RTC (e fumaneha feela bakeng sa ACPI).
• SEG Chipset Feature: Khetho ena e u lumella ho nolofalletsa / ho tima ho tsoha ho USB ho tsoa ho boemo ba S5.
• Tlhophiso ea OEM: Litlhophiso tsa LVDS lia fumaneha ho fetoha.
• SIO SCH 3222: Likou tsa serial li lokiselitsoe mona.
• Tlhophiso ea H2OUVE: O ka nolofalletsa/etsa sebopeho sa sebopeho sa sesebelisoa sa H2OUVE.

Tshireletso

• Lintlha tsa sesebelisoa sa hajoale sa TPM lia fumaneha mona 'me u ka seta le li-password tsa mookameli.

Matla

• Litlhophiso tsa CPU lia khonahala.
• Likhetho tsa ho tsoha ho PME/RTC ho tsoa ho S5 lia fumaneha.

Bootsa

• Basebedisi ba ka beha mokhoa oa ho qalisa, tatellano, nako ea ho qeta nako, le ho hlōleha ha lisebelisoa tsa boot ha BIOS e leka ho kenya mokhoa oa ho sebetsa.

Etsoa

• Likhetho tsa basebelisi ba ho kenya kapa ho tsoa ho Setupo sa BIOS li kenyelletsa ho kenya maemo a nepahetseng a sistimi kapa ho kenya litlhophiso tsa tloaelo, ho tsoa ka liphetoho tsa tloaelo tse bolokiloeng kapa tse sa bolokoang.

Windows 10 System Flashing

Lintho tse hlokahalang

• USB drive e nang le matla a seng ka tlase ho 8GB, ka ho khetheha e tšehetsa USB 3.0
• Sesebelisoa sa USB se bootable: rufus-xxx .exe (e fumaneha ka har'a sephutheloana sa tokollo tlas'a buka ea litšoantšo)
• Windows 10 setšoantšo
• PC e amohelang Windows 7 kapa hamorao
• Cable e bonts'ang ho hokahanya Boto le PC e amohelang

Ho etsa bootable USB Drive bakeng sa Windows 10

Hokela koloi ea USB ho PC e amohelang. Matha rufus-xxx .exe 'me e tla iphumanela USB. Ebe u latela mehato e ka tlase ho etsa bootable USB drive.

1. Tobetsa ho Sesebelisoa ebe u khetha USB eo u batlang ho e sebelisa ho tloha ho theoha;
2. Khetha setšoantšo sa ISO seo u batlang ho se chesa ho USB ho tloha ho theoha ebe o tobetsa Khetha;
3. Ka kakaretso, basebelisi ba ka rata ho theha Sets'oants'o se Tloaelehileng sa Windows, 'me Rufus o tla iponela ka bohona Sekema se nepahetseng sa Partition se ipapisitseng le drive ea USB. Leha ho le joalo etsa bonnete ba hore morero oa karohano ke GPT;
4. Beha Sisteme ea Target joalo ka UEFI le the File tsamaiso e le FAT32 kapa NTFS;
5. Tobetsa QALA ho etsa drive ea USB e bootable.

Ho kenya Windows 10

1. Hokela bootable USB drive ka Boto;
2. Hokela Boto ho PC e amohelang 'me u matlafatse Boto;
3. Tobetsa F7 ho kenya menu ea BIOS boot manager;
4. Khetha drive ea bootable ea USB eo u e entseng Windows 10 ebe u tobetsa ENTER;
5. Emela ho kengoa Windows 10 ho Boto. Ha ts'ebetso e felile, ho tla ba le letšoao la Windows 10 komporong ea hau.

TLHOKOMELO LE TIISETSO

Ho lahla

Ha sesebelisoa se fihla pheletsong ea bophelo, ho khothalletsoa ho lahla sesebelisoa hantle molemong oa tikoloho le polokeho.
Pele o lahla sesebediswa, ka kopo boloka bekapo ya data mme o e hlakole sesebedisweng.
Ho khothalletsoa hore sesebelisoa se qhaloe pele se lahla ho latela melao ea sebaka seo. Ka kopo etsa bonnete ba hore libeteri tse lahliloeng li lahliloe ho latela melao ea lehae mabapi le ho lahla litšila. U se ke ua lahlela libeteri mollong kapa ua kenya liqoapi tse tloaelehileng kaha lia phatloha. Lihlahisoa kapa liphutheloana tsa lihlahisoa tse ngotsoeng ka lets'oao la "qhomane" ha lia lokela ho lahloa joalo ka litšila tsa ntlo empa li isoe setsing se ikhethileng sa motlakase le litšila tsa elektroniki.
Ho lahla litšila tsa mofuta ona ka nepo ho thusa ho qoba kotsi le phello e mpe tikolohong le bophelong ba batho. Ka kopo, ikopanye le mekhatlo ea lehae kapa setsi sa recycling/lahlwa bakeng sa mekhoa e meng ea ho recycle/ea ho lahla lihlahisoa tse amanang.

Tiisetso

Tiisetso ea sehlahisoa
VANTRON e fana ka tiisetso ho CUSTOMER ea eona hore Sehlahisoa se entsoeng ke VANTRON, kapa bo-rakonteraka ba tlaasana ba sona se tla ikamahanya ka thata le lintlha tseo ho lumellanoeng ka tsona 'me se hloke sekoli mosebetsing le thepa (ntle le se fanoeng ke CUSTOMER) ha se romelloa ho tsoa VANTRON. Tlamo ea VANTRON tlas'a tiisetso ena e lekanyelitsoe ho fetola kapa ho lokisa ka khetho ea eona ea Sehlahisoa seo, nakong ea likhoeli tse 24 ho itšetlehile ka Sehlahisoa ka mor'a ho romelloa, ho qala ho tloha ka letsatsi la invoice, se khutlisetsoa femeng ea VANTRON ka tefiso ea sepalangoang e lefelloang ke CUSTOMER le , ka mor'a tlhahlobo, e senoloe ho khotsofalo e utloahalang ea VANTRON hore e be e nang le bokooa. VANTRON e tla jara tefiso ea sepalangoang bakeng sa ho romelloa ha Sehlahisoa ho MOEKETSI.

Tokiso e Ntle ho Tiisetso
VANTRON e tla fana ka lits'ebeletso tsa tokiso ea Sehlahisoa tseo e seng tsa tiisetso ho latela litefiso tse neng li le teng ka nako eo tsa VANTRON bakeng sa lits'ebeletso tse joalo. Ka kopo ea moreki, VANTRON e tla fana ka likarolo ho CUSTOMER bakeng sa tokiso e sa faneng ka tiisetso. VANTRON e tla fana ka ts'ebeletso ena hafeela likarolo li fumaneha 'marakeng; mme moreki o kopuwa ho beha odara ya theko ka pele. Likarolo tse lokisitsoeng li tla ba le tiisetso e atolositsoeng ea likhoeli tse 3.

Lihlahisoa tse khutlisitsoeng
Sehlahiswa sefe kapa sefe se fumanwang se haella mme se sireleditswe tlasa tiisetso ho latela Molao o ka hodimo, se tla kgutlisetswa ho VANTRON feela ha MOEKETSI a fumana le ho ipapisa le nomoro ya VANTRON e fanoeng Returned Materials Authorization (RMA). VANTRON e tla fana ka RMA, ha e hlokoa nakong ea matsatsi a mararo (3) a ts'ebetso a kopo ea Customer. VANTRON e tla fana ka invoice e ncha ho CUSTOMER ha lihlahisoa tse khutlisitsoeng li romelloa ho CUSTOMER. Pele ho khutlisoa lihlahisoa life kapa life ke CUSTOMER ka lebaka la ho hana kapa bofokoli ba tiisetso, CUSTOMER o tla fa VANTRON monyetla oa ho hlahloba lihlahisoa tse joalo sebakeng sa CUSTOMER mme ha ho Sehlahisoa se hlahlobiloeng joalo se tla khutlisetsoa VANTRON ntle le lebaka la ho hana kapa sekoli. e ikemiselitse ho ba boikarabello ba VANTRON. VANTRON le eona e tla fana ka thomello ea phetoho ea CUSTOMER Sehlahisoang se nang le bothata nakong ea matsatsi a leshome le metso e mene (14) a ho sebetsa ha e se e fumane VANTRON. Haeba phetoho e joalo e ke ke ea fanoa ke VANTRON ka lebaka la lisosa tse fetang taolo ea VANTRON, VANTRON e tla ngola liketsahalo tse joalo le ho tsebisa CUSTOMER hang-hang.

www.vanrontech.com

Litokomane / Lisebelisoa

Vantron VT-MITX-APL Single Board Computer [pdf] Bukana ea Mosebelisi VT-MITX-APL Single Board Computer, VT-MITX-APL, Single Board Computer, Board Computer, Computer

Litšupiso

• Bukana ea Mosebelisi