UNITRONICS V130-33-B1 Taolo ea Monahano e Reriloeng

Tlhaloso e Akaretsang

Lihlahisoa tse thathamisitsoeng ka holimo ke li-micro-PLC+HMIs, li-control tsa logic tse rugged tse nang le liphanele tse sebetsang tse hahelletsoeng.
Litaelo tse qaqileng tsa ho kenya tse nang le litšoantšo tsa marang-rang tsa I/O bakeng sa mefuta ena, litlhaloso tsa tekheniki, le litokomane tse ling li fumaneha Laeboraring ea Tekheniki ho Unitronics. websebaka:
https://unitronicsplc.com/support-technical-library/

Ntho	V130-B1 V130J-B1		V350-B1 V350J-B1		V430J-B1
Skrine	2.4″		3.5 ″ Colour Touch		4.3 ″ Colour Touch
Keypad	Ee		Ha ho letho
Linotlolo tsa Mosebetsi	Ha ho letho		Ee
Com Port, E hahiloeng
RS232/485	Ee	Ee	Ee*	Ee*	Ee*
Sesebelisoa sa USB, mini-B	Ha ho letho	Ha ho letho	Ee*	Ee*	Ee*
Com Ports, tatellano e arohaneng, e kentsoe ke mosebelisi	Mosebelisi a ka kenya boema-kepe ba CANbus (V100-17-CAN), le ngoe ea tse latelang: · RS232/RS485 port (V100-17-RS4/V100-17-RS4X) · Ethernet (V100-17-ET2) ·Profibus Slave (V100-17-PB1)
* V430J/V350/V350J e na le RS232/485 le likou tsa USB; hlokomela seo feela ngoe mocha o ka sebelisoa ka nako e le 'ngoe.

Likahare tsa Standard Kit

Ntho	V130-B1 V130J-B1	V350-B1 V350J-B1	V430J-B1
Molaoli	Ee
Li-Terminal Blocks	Ee
Betri (e kentsoe)	Ee
Liselaete (lihlopha tse 2 tsa li-labels tsa bohlokoa)	Ha ho letho	Ee	Ha ho letho
Li-brackets tse ntseng li eketseha	Ee (likarolo tse 2)		Ee (likarolo tse 4)
Rubber Tiiso	Ee

Matshwao a Tlhokomediso le Dithibelo tse Akaretsang
Ha leha e le efe ea matšoao a latelang a hlaha, bala lintlha tse amanang le tsona ka hloko.
Letšoao	Tlhaloso	Tlhaloso
	Kotsi	Kotsi e boletsoeng e baka tšenyo ea 'mele le thepa.
	Tlhokomediso	Kotsi e boletsoeng e ka baka tšenyo ea 'mele le thepa.
Tlhokomeliso	Tlhokomeliso	E-ba hlokolosi.
§ Pele o sebelisa sehlahisoa sena, mosebelisi o tlameha ho bala le ho utloisisa tokomane ena. § Tsohle exampli-les le litšoantšo li reretsoe ho thusa ho utloisisa, 'me ha li fane ka tiiso ea ts'ebetso. Unitronics ha e amohele boikarabello bakeng sa ts'ebeliso ea 'nete ea sehlahisoa sena ho latela li-examples. § Ka kopo, lahla sehlahisoa sena ho latela maemo le melaoana ea lehae le ea naha. § Ke basebetsi ba nang le litsebo feela ba lokelang ho bula sesebelisoa sena kapa ho etsa tokiso.
	§ Ho hloleha ho ikamahanya le ditataiso tse nepahetseng tsa polokeho ho ka baka kotsi e mpe kapa tshenyo ya thepa.
	§ Se ke oa leka ho sebelisa sesebelisoa sena se nang le li-parameter tse fetang maemo a lumelletsoeng. § Ho qoba ho senya sistimi, o seke oa hokela / o hakolla sesebelisoa ha motlakase o le teng.

Tikoloho Ho nahanela
	§ Se kenye libakeng tse nang le: lerōle le feteletseng kapa le nang le mocheso o mongata, khase e senyang kapa e tukang, mongobo kapa pula, mocheso o feteletseng, ts'oaetso e tloaelehileng kapa ho sisinyeha ho feteletseng, ho latela litekanyetso tse fanoeng letlapeng la lintlha tsa tekheniki tsa sehlahisoa. § Se ke oa beha ka metsing kapa ua lumella metsi hore a lutlele holim'a yuniti. § U se ke ua lumella lithōle ho oela ka har'a yuniti nakong ea ho kenya.
	§ Ho kenya moea: sebaka sa 10mm se hlokahalang lipakeng tsa mathōko a ka holimo/ka tlase le mabota a kampetsoeng. § Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase.

Ho phahamisa

Hlokomela hore lipalo ke tsa lipapiso feela.

* Hlokomela hore bakeng sa mehlala ea V130J/V350J, bophara ba bezel ke 6.7 mm (0.26”).

Mohlala	Khaola-tsoa	View sebaka
V130V130J	92×92 limilimithara (3.622"x3.622")	58×30.5mm (2.28″x1.2″)
V350/V350J	92×92 limilimithara (3.622"x3.622")	72×54.5mm (2.95″x2.14″)
V430J	122.5×91.5 limilimithara (4.82"x3.6")	96.4×55.2mm (3.79″x2.17″)

Ho phahamisa Panel
Pele o qala, hlokomela hore phanele e ntseng e eketseha e ke ke ea ba botenya bo fetang 5 mm.

1. Etsa phanele e sehiloeng ka boholo bo loketseng:
2. Tsamaisa selaoli sebakeng se sehiloeng, ho etsa bonnete ba hore tiiso ea rabara e teng.
3. Sututsa li-brackets tse ntseng li phahama ka har'a li-slots tsa tsona mahlakoreng a phanele joalo ka ha ho bonts'itsoe setšoantšong se ka tlase.
4. Tiisa li-screws tsa bracket khahlanong le phanele. Tšoara borakete ka mokhoa o sireletsehileng khahlano le yuniti ha u ntse u tiisa screw.
5. Ha e kentsoe ka nepo, selaoli se lula se le sephara ka har'a karolo e sehiloeng ea liphanele joalokaha ho bontšitsoe litšoantšong tse tsamaisanang le sehlooho sena.

DIN-Rail Mounting (V130/V350/V130J/V350J)

1. Tobetsa selaoli seporong sa DIN joalokaha ho bontšitsoe setšoantšong se ka ho le letona.
2. Ha e kentsoe hantle, molaoli o lutse hantle holim'a DIN-rail joalo ka ha ho bonts'itsoe setšoantšong se ka ho le letona.

UL Compliance

Karolo e latelang e amana le lihlahisoa tsa Unironic tse thathamisitsoeng le UL.

Mehlala e latelang: V130-33-R34, V130-J-R34, V130-T4-ZK1, V350-35-RA22, V350-J-RA22, V350-35-R34, V350-J-R34, V430-J-R34
li thathamisitsoe ke UL bakeng sa Libaka tse Kotsi.

Mehlala e latelang: V130-33-B1,V130-J-B1,V130-33-TA24,V130-J-TA24,V130-33-T38,V130-J-T38 V130-33-TR20,V130-J-TR20,V130-33-TR34,V130-J-TR34,V130-33-RA22,V130-J-RA22, V130-33-TRA22,V130-J-TRA22,V130-33-T2,V130-J-T2,V130-33-TR6,V130-J-TR6,V130-33-R34, V350-35-B1, V130-T4-ZK1, V350-J-B1,V350-35-TA24,V350-J-TA24,V350-35-T38,V350-J-T38, V350-35-TR20,V350-J-TR20,V350-35-TR34,V350-J-TR34,V350-35-TRA22,V350-J-TRA22,
V350-35-T2,V350-J-T2,V350-35-TR6,V350-J-TR6,V350-S-TA24,V350-JS-TA24,V350-35-RA22, V350-J-RA22,V350-35-R34, V430-J-B1,V430-J-TA24,V430-J-T38, V430-J-R34,V430-J-RH2, V430-J-TR34,V430-J-RA22,V430-J-TRA22,V430-J-T2,V430-J-RH6 are UL listed for Ordinary Location.
Bakeng sa mehlala ho tsoa letotong la V130, V130-J, V430, e kenyelletsang "T4" kapa "J4" ka lebitso la Mohlala, E loketse ho beoa holim'a sebaka se bataletseng sa mofuta oa 4X o koetsoeng.

Bakeng sa mohlalaamphanyane: V130-T4-R34, V130-J4-R34, V430-J4-T2

UL Sebaka se Tloaelehileng
E le hore u finyelle maemo a tloaelehileng a sebaka sa UL, beha sesebelisoa sena sebakeng se bataletseng sa mefuta ea 1 kapa ea 4 X.

Litekanyetso tsa UL, Balaoli ba Rerang ho Sebelisa Libakeng Tse Kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D
Lintlha tsena tsa Phatlalatso li amana le lihlahisoa tsohle tsa Unironic tse nang le matšoao a UL a sebelisoang ho tšoaea lihlahisoa tse lumelletsoeng ho sebelisoa libakeng tse kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D.

Tlhokomeliso 

• Thepa ena e loketse ho sebelisoa ho Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D, kapa libakeng tse seng kotsi feela.
• Lithapo tsa ho kenya le tse tsoang li tlameha ho tsamaellana le mekhoa ea likhoele tsa Sehlopha sa I, Karolo ea 2 le ho latela bolaoli bo nang le matla a ho laola.
• TEMOSO—Ho phatloha Kotsi-ho nkela likarolo sebaka ho ka sitisa ho tšoaneleha bakeng sa Sehlopha sa I, Karolo ea 2.
• TLHOKOMELO – KOTSI EA HO PHAHLOA – Se ke oa hokela kapa oa hakolla lisebelisoa ntle le haeba motlakase o tingoe kapa sebaka seo ho tsejoa hore ha se kotsi.
• TLHOKOMELO - Ho pepesetsoa lik'hemik'hale tse ling ho ka theola thepa ea tiiso ea thepa e sebelisoang ho Relays.
• Thepa ena e tlameha ho kengoa ho sebelisoa mekhoa ea likhoele joalo ka ha ho hlokahala bakeng sa Sehlopha sa I, Karolo ea 2 joalo ka NEC le/kapa CEC.

Phanele-Mounting
Bakeng sa li-controller tse ka hlophisoang le ka har'a phanele, molemong oa ho kopana le maemo a UL Haz Loc, beha sesebelisoa sena sebakeng se bataletseng sa mefuta ea 1 kapa mefuta ea 4X.

Relay Output Resistance Ratings
Lihlahisoa tse thathamisitsoeng ka tlase li na le liphetho tsa relay:
Balaoli ba mananeo, Mehlala: V430-J-R34, V130-33-R34, V130-J-R34 le V350-35-R34, V350-J-R34

• Ha lihlahisoa tsena tse khethehileng li sebelisoa libakeng tse kotsi, li lekantsoe ho 3A res.
• Ntle le mehlala V430-J-R34, V130-33-R34, V130-J-R34, V130-T4-ZK1 le V350-35-R34, V350-J-R34, ha lihlahisoa tsena tse khethehileng li sebelisoa tikolohong e seng kotsi. maemo, li lekantsoe ho 5A res, joalo ka ha ho fanoe ka litlhaloso tsa sehlahisoa.

Puisano le Polokelo ea Mehopolo e Tlohang
Ha lihlahisoa li kenyelletsa boema-kepe ba puisano ba USB, slot ea karete ea SD, kapa ka bobeli, ha ho joalo
sekotjana sa karete ea SD kapa boema-kepe ba USB li reretsoe ho hokela ruri, ha boema-kepe ba USB bo reretsoe ho etsa mananeo feela.

Ho ntsha/ Ho ntsha betri
Ha sehlahiswa se kentswe ka betri, o se ke wa ntsha kapa wa nkela betri sebaka ntle le haeba motlakase o timilwe, kapa sebaka seo ho tsejwa hore ha se kotsi.
Ka kopo hlokomela hore ho kgothaletswa ho boloka dintlha tsohle tse bolokiloeng ho RAM, e le ho qoba ho lahleheloa ke data ha u fetola betri ha matla a tima. Lintlha tsa letsatsi le nako le tsona li tla hloka ho hlophisoa bocha kamora ts'ebetso.

Wiring

• U se ke ua tšoara lithapo tse phelang.
• Kenya sekhechana sa potoloho se kantle. Itebele khahlanong le short-circuiting ka terata e kantle.
• Sebelisa lisebelisoa tse nepahetseng tsa tšireletso ea potoloho.
• Lithako tse sa sebelisoeng ha lia lokela ho kopanngoa. Ho iphapanyetsa taelo ena ho ka senya sesebelisoa.
• Lekola lithapo tsohle habeli pele o bulela phepelo ea motlakase.
• Ho qoba ho senya terata, u se ke ua feta torque e kholo ea 0.5 N·m (5 kgf·cm).
• Tlhokomeliso
  • Se ke oa sebelisa thini, solder kapa ntho leha e le efe holim'a terata e hlobotseng e ka etsang hore khoele ea terata e khaohe.
  • Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase.

Mokhoa oa ho Wiring
Sebelisa liteishene tsa crimp bakeng sa Sebelisa li-terminals tsa crimp bakeng sa likhoele;

• Balaoli ba fanang ka block block e nang le sekontiri sa 5mm: terata ea 26-12 AWG (0.13 mm2 -3.31 mm2).
• Balaoli ba fanang ka block block e nang le sekontiri sa 3.81mm: terata ea 26-16 AWG (0.13 mm2 - 1.31 mm2).

1. Hlōla terata ho bolelele ba 7±0.5mm (0.270–0.300“).
2. Hlakola theminale sebakeng sa yona se sephara ka ho fetisisa pele o kenya terata.
3. Kenya terata ka botlalo ho theminale ho netefatsa hore ho na le khokahanyo e nepahetseng.
4. Tiisa ho lekana hore terata e se ke ea hula ka bolokolohi.

• Lithapo tse kenyang kapa tse tsoang ha lia lokela ho tsamaisoa ka thapo e tšoanang ea li-multi-core kapa ho arolelana terata e tšoanang.
• Lumella voltagtšitiso ea ho theola le lerata le mela ea I/O e sebelisitsoeng sebaka se selelele. Sebelisa terata e boholo bo lekaneng bakeng sa mojaro.
• Molaoli le matšoao a I / O a tlameha ho hokahana le lets'oao le tšoanang la 0V.

Phepelo ea motlakase

Setšoantšo ke sa papiso feela.
Molaoli o hloka matla a kantle a 12VDC kapa 24VDC.

• Motlakase o tlameha ho kenyelletsa ho pata habeli. Lintho tse hlahisoang li tlameha ho behoa joalo ka SELV/PELV/Class2/Limited Power.
• Sebelisa lithapo tse arohaneng ho hokahanya mohala oa lefats'e o sebetsang (pin 3) le mohala oa 0V (pin 2) ho sistimi ea lefats'e.
• Kenya sekhechana sa potoloho se kantle. Itebele khahlanong le short-circuiting ka terata e kantle.
• Lekola lithapo tsohle habeli pele o bulela phepelo ea motlakase.
• Se ke oa hokela lets'oao la 'Neutral' kapa 'Line' la 110/220VAC ho phini ea 0V ea sesebelisoa.
• Ketsahalong ea voltage ho feto-fetoha kapa ho se lumellane le voltage lintlha tsa phepelo ea motlakase, hokela sesebelisoa ho phepelo ea motlakase e laoloang.

Ho hlahisa PLC+HMI
Ho eketsa ts'ebetso ea sistimi, qoba tšitiso ea motlakase ka:

• Ho kenya molaoli holim'a phanele ea tšepe.
• Hokela khokahano e 'ngoe le e' ngoe e tloaelehileng le ea fatše ka kotloloho mobung oa sistimi ea hau.
• Bakeng sa lithapo tsa fatše ho sebelisoa terata e khutšoanyane le e teteaneng ka ho fetisisa.

Puisano 

• V130/ V130J
  Mefuta ena e kenyelletsa boema-kepe ba serial ba RS232/RS485 (Port 1)
• V430J/ V350/V350J
  Mefuta ena e na le likou tse hahelletsoeng ka hare: 1 USB le 1 RS232/RS485 (Port 1).
  Hlokomela hore ho hokahanya komporo ea 'mele ho molaoli ka USB ho emisa lipuisano tsa RS232/RS485 ka Port 1. Ha PC e khaotsoe, RS232/RS485 e qala hape.

Boema-kepe ba RS232/RS485 

• Tima motlakase pele o etsa likhokahano tsa likhokahano.
• Tlhokomeliso
  • Kamehla sebelisa li-adapter tse loketseng tsa koung.
• Tlhokomeliso
  • Lipontšo li amana le 0V ea molaoli; 0V e tšoanang e sebelisoa ke phepelo ea motlakase.
  • The serial port ha e arotsoe. Haeba molaoli o sebelisoa ka sesebelisoa sa kantle se sa itšehla thajana, qoba matla a ka bang tengtage e fetang ± 10V.
• Sebelisa RS232 ho khoasolla mananeo ho tsoa komporong, le ho buisana le lisebelisoa tsa serial le lits'ebetso, joalo ka SCADA.
• Sebelisa RS485 ho theha marang-rang a marotholi a mangata a nang le lisebelisoa tse fihlang ho 32.

Pinouts
Li-pinouts tse ka tlase li bonts'a matšoao a boema-kepe ba PLC.

RS232
Pin #	Tlhaloso
1*	Letšoao la DTR
2	Tlhaloso ea 0V
3	Letšoao la TXD
4	Letšoao la RXD
5	Tlhaloso ea 0V
6*	Letšoao la DSR

RS485**		Port ea Molaoli
Pin #	Tlhaloso
1	Letšoao (+)
2	(Lets'oao la RS232)
3	(Lets'oao la RS232)
4	(Lets'oao la RS232)
5	(Lets'oao la RS232)
6	Letshwao la B (-)

* Lithapo tse tloaelehileng tsa mananeo ha li fane ka lintlha tsa khokahanyo bakeng sa pin 1 le 6.
** Ha kou e ikamahanya le RS485, Pin 1 (DTR) e sebelisetsoa lets'oao la A, 'me lets'oao la Pin 6 (DSR) le sebelisetsoa lets'oao la B.

Hlokomela hore hoa khoneha ho theha khokahanyo ea PC ho PLC ho sebelisa RS232 le ha PLC e behiloe ho RS485 (sena se felisa tlhokahalo ea ho bula molaoli ho seta jumpers).
Ho etsa joalo, tlosa sehokelo sa RS485 (pins 1 & 6) ho PLC ebe o hokela thapo e tloaelehileng ea lenaneo la RS232.
Hlokomela hore sena se ka khoneha ha feela matšoao a DTR le DSR a RS232 a sa sebelisoe (e leng boemo bo tloaelehileng).

Ho beha RS232/RS485 Mekhahlelo ea Puisano, V130/V350/V130J/V350J
Boema-kepe bona bo ka hlophisoa ho RS232 kapa RS485 ka jumper.

Setšoantšo se tsamaeang le sena se bontša litlhophiso tsa kamehla tsa feme ea jumper.
Li-jumpers tsena li ka sebelisoa ho:

• Beha likhokahano ho RS485, ka ho beha li-jumpers tsa COMM ka bobeli ho '485'.
• Beha pheliso ea RS485, ka ho beha li-jumpers tsa TERM ka bobeli ho 'OFF'.

Ho fihlella li-jumpers, o tlameha ho bula selaolo ho latela litaelo tse leqepheng la 8.

Ho beha RS232 / RS485 Mekhahlelo ea Puisano, V430J
Boema-kepe bona bo ka hlophisoa ho RS232 kapa RS485 ka li-switch tsa DIP:
Tafole e bonts'a DIP e fetola litlhophiso tsa kamehla tsa feme. Sebelisa tafole ho ikamahanya le maemo.

	Fetola Lisebelisoa
	1	2	3	4	5	6
RS232 *	ON	TLOA	TLOA	ON	TLOA	TLOA
RS485	TLOA	ON	ON	TLOA	TLOA	TLOA
RS485 ha e felisoe **	TLOA	ON	ON	TLOA	ON	ON

* Litlhophiso tsa feme ea kamehla
** E etsa hore yuniti e sebetse e le yuniti ea pheletso ho netweke ea RS485

Boema-kepe ba USB

Tlhokomeliso

• Boema-kepe ba USB ha bo arohane.
  Etsa bonnete ba hore PC le molaoli li thehiloe ho bokhoni bo tšoanang.

Boema-kepe ba USB bo ka sebelisoa bakeng sa ho etsa mananeo, ho jarolla OS, le phihlello ea komporo.

Ho bula Selaoli (V130/V350/V130J/V350J Feela) 

• Pele o etsa liketso tsena, ama ntho e theiloeng fatše ho ntša tefiso efe kapa efe ea electrostatic.
• Qoba ho ama letlapa la PCB ka kotloloho. Tšoara boto ea PCB ka lihokelo tsa eona.

1. Koala phepelo ea motlakase, e hakolle, 'me u theole selaoli.
2. Sekoahelo se ka morao sa molaoli se na le li-screw tse 4, tse likhutlong. Tlosa li-screws, 'me u hule sekoahelo se ka morao.

Ho Fetola Litlhophiso tsa Puisano (V130/V350/V130J/V350J Feela)

1. Ho fihlella li-jumpers tsa puisano, tšoara boto ea phepelo ea Matla a PCB ka mathōko a eona 'me butle-butle u hule boto.
2. Fumana li-jumpers, ebe u fetola li-setting kamoo ho hlokahalang, ho latela litlhophiso tsa li-jumpers tse bontšitsoeng leqepheng la 7.

Ho koala Selaoli (V130/V350/V130J/V350J Feela) 

1. Ka bonolo fetola boto. Etsa bonnete ba hore lithakhisa li kena hantle ka har'a sephutheloana sa tsona. U se ke ua qobella boto sebakeng; ho etsa joalo ho ka senya molaoli.
2. Tlosa sekoahelo se ka morao sa molaoli 'me u fate li-screws tsa sekhutlo.

Hlokomela hore o tlameha ho khutlisa sekoaelo se ka morao ka mokhoa o sireletsehileng pele o matlafatsa molaoli.

V130-33-B1/V130-J-B1
V350-35-B1/V350-J-B1
V430-J-B1

Litlhaloso tsa Tekheniki

Lintlha tsa Odara
Ntho
V130-33-B1	PLC e nang le phanele ea khale, pontšo ea Monochrome 2.4 ″
V130-J-B1	PLC e nang le Flat panel, Monochrome display 2.4 ″
V350-35-B1	PLC e nang le phanele ea khale, color touch display 3.5''
V350-J-B1	PLC e nang le Flat panel, Colour touch display 3.5''
V430-J-B1	PLC e nang le Flat panel, Colour touch display 4.3''
U ka fumana lintlha tse ling, joalo ka litšoantšo tsa wiring, bukeng ea tataiso ea ho kenya sehlahisoa e fumanehang Laeboraring ea Teknoloji ho www.unitronics.com.

Phepelo ea motlakase 

• Ntho
  • V130-B1
  • V130J-B1
  • V350-B1
  • V350J-B1
  • V430J-B1
• Keletso voltage 12VDC kapa 24VDC
• Sebaka se lumelletsoeng 10.2VDC ho isa ho 28.8VDC e nang le ripple e ka tlase ho 10%.
• Max. tshebediso ya jwale Sheba Ntlha ya 1

200mA @ 12VDC	220mA @ 12VDC	220mA @ 12VDC
100mA @ 24VDC	110mA @ 24VDC	110mA @ 24VDC

Lintlha:

1. Ho bala matla a sebele a sebelisoang, tlosa hona joale bakeng sa ntho e 'ngoe le e 'ngoe e sa sebelisoeng ho tloha ho boleng bo phahameng ba tšebeliso ea hona joale ho latela litekanyetso tse ka tlase:

V130/J
V350/J/V430J

V130/J
V350/J/V430J

Keletso voltage	Backlight	Karete ea Ethernet
12V	20mA	70mA
	40mA	70mA
24V	10mA	35mA
	20mA	35mA

Skrine ea Pontšo ea Graphic
Ntho	V130-B1 V130J-B1	V350-B1 V350J-B1	V430J-B1
Mofuta oa LCD	STN, ponts'o ea LCD	TFT, pontšo ea LCD	TFT, pontšo ea LCD
Lebone la morao la khanya	LED e tšoeu	LED e tšoeu	LED e tšoeu
Qeto ea pontšo	128x64 pixels	320x240 pixels	480x272 pixels
Viewsebaka	2.4″	3.5″	4.3″
Mebala	Monochrome	65,536 (16-bit)	65,536 (16-bit)
Phapang ea Screen	Ka software (Boleng ba polokelo ho SI 7, boleng bo fapana: 0 ho isa ho 100%)	E tsitsitse	E tsitsitse
Skrine se thetsoang	Ha ho letho	Ho hanyetsa, analogue	Ho hanyetsa, analogue
Pontšo ea 'Touch'	Ha ho letho	Ka buzzer	Ka buzzer
Taolo ea khanya ea skrine	Ka software (Boleng ba lebenkele ho SI 9, 0 = Theohile, 1 = Buletsoe)	Ka software (Boleng ba polokelo ho SI 9, boleng bo fapana: 0 ho isa ho 100%)
Keypad ea Virtual	Ha ho letho	E hlahisa keyboard ea sebele ha sesebelisoa se hloka ho kenngoa ha data.

Keypad
Ntho	V130-B1 V130J-B1	V350-B1 V350J-B1	V430J-B1
Palo ea linotlolo	Linotlolo tse 20, ho kenyeletsoa le linotlolo tse 10 tse ngotsoeng ke basebelisi	Likonopo tse 5 tse ka sebelisoang
Mofuta oa senotlolo	Dome ea tšepe, switch e tiisitsoeng ea membrane
Liselaete	Li-slide li ka kenngoa ka har'a phanele ea ts'ebetso ho beha linotlolo ka tloaelo. Sheba V130 Keypad Slides.pdf. Sete e felletseng ea li-slide tse se nang letho e fumaneha ka odara e arohaneng	Li-slide li ka kenngoa ka har'a phanele ea ts'ebetso ho beha linotlolo ka tloaelo. Sheba V350 Keypad Slides.pdf. Lihlopha tse peli tsa li-slide li fanoa ka molaoli: sete e le 'ngoe ea linotlolo tsa metsu, le sete e le 'ngoe e se nang letho.	Ha ho letho

Lenaneo
Ntho	V130-B1 V130J-B1	V350-B1 V350J-B1	V430J-B1
Boholo ba memori
Mokhoa oa ho Sebelisa	512 KB	1MB	1MB
Litšoantšo	128 KB	6MB	12MB
Mehala	128 KB	512 KB	512 KB

Mofuta oa ts'ebetso /Quantity/Symbol/Value

Ntho	V130-B1 V130J-B1	V350-B1 V350J-B1 V430J-B1
Likotoana tsa memori	4096	8192	MB	Bit (khola)
Lintlha tsa Memori	2048	4096	MI	16-bit e saennoe/e sa saena
Linomoro tse telele	256	512	ML	32-bit e saennoe/e sa saena
Mantsoe a Habeli	64	256	DW	32-bit e sa saenneng
Mehopolo E phaphamala	24	64	MF	32-bit e saennoe/e sa saena
Li-Bits tse potlakileng	1024	1024	XB	Fast Bits (coil) - ha e bolokehe
Li-integer tse potlakileng	512	512	XI	16 bit e saennoe / e sa saena (ka potlako, ha e bolokehe)
Li-integers tse telele tse potlakileng	256	256	XL	32 bit e saennoe / e sa saena (ka potlako, ha e bolokehe)
Fast Double Word	64	64	XDW	32 bit e sa ngolisoang (ka potlako, ha e bolokehe)
Lisebelisoa tsa nako	192	384	T	Res. 10 ms; max 99h, 59 mets, 59.99s
Libali	24	32	C	32-bit

• Litafole tsa Lintlha
  • Lintlha tse matla tsa 120K (li-parameter tsa recipe, li-datalogs, joalo-joalo)
  • 192K data e tsitsitseng (data e baloang feela, mabitso a motsoako, joalo-joalo)
  • E atolosoa ka karete ea SD. Sheba Memori e Nkoang ka tlase
• Lipontšo tsa HMI
  • Ho fihlela ho 1024
• Nako ea ho hlahloba lenaneo
  • 20μs ka 1kb ea ts'ebeliso e tloaelehileng
  • 15μs ka 1kb ea ts'ebeliso e tloaelehileng

Mehopolo e Tlohang
Karete ea Micro SD	E lumellana le SD le SDHC e tloaelehileng; ho fihlela ho 32GB polokelo datalogs, Alarms, Trends, Data Tables, bekapo Ladder, HMI, le OS. Sheba Ntlha ea 2
Lintlha:
2. Mosebelisi o tlameha ho fomata ka lisebelisoa tsa Unitronics SD.

Li-Ports tsa puisano
Boema-kepe ba 1	1 channel, RS232/RS485 le sesebelisoa sa USB (V430/V350/V350J feela). Sheba Ntlha ea 3
Ho itšehla thajana ka Galvanic	Che
Sekhahla sa Baud	300 ho isa ho 115200 bps
RS232
Keletso voltage	± 20VDC ka ho feletseng
Bolelele ba thapo	15m boholo (50')
RS485
Keletso voltage	-7 ho + 12VDC boholo bo fapaneng
Mofuta oa thapo	Lipara tse sothehileng tse sirelelitsoeng, ho latela EIA 485
Bolelele ba thapo	1200m boholo (4000')
Nodes	Ho fihlela ho 32
Sesebelisoa sa USB (V430/V350/V350J feela)
Mofuta oa boema-kepe	Mini-B, Sheba Ntlha ea 5
Tlhaloso	USB 2.0 tletlebo; lebelo le tletseng
Cable	USB 2.0 tletlebo; ho fihlela ho 3m
Boema-kepe ba 2 (boikhethelo)	Sheba Ntlha ea 4
CANbus (boikhethelo)	Sheba Ntlha ea 4

Lintlha:

• Moetso ona o fanoa ka boema-kepe ba serial: RS232/RS485 (Port 1). Tekanyetso e behiloe ho RS232 kapa RS485 ho latela litlhophiso tsa jumper. Sheba Tataiso ea Tlhophiso ea sehlahisoa.
• Mosebelisi a ka odara le ho kenya module e le 'ngoe kapa tse peli tsa tse latelang: - Boema-kepe bo eketsehileng (Port 2). Mefuta e fumanehang ea boema-kepe: RS232 / RS485 e arohaneng / e seng e arohane, Ethernet - Litokomane tsa module tsa CANbus port Port lia fumaneha ho Unitronics. websebaka.
• Hlokomela hore ho hokahanya komporo ea 'mele ho molaoli ka USB ho emisa lipuisano tsa RS232/RS485 ka Port 1. Ha PC e khaotsoe, RS232/RS485 e qala hape.

I/O Katoloso
	Li-I/O tse ling li ka eketsoa. Litlhophiso li fapana ho latela mojule. E tšehetsa dijithale, lebelo le phahameng, analoge, boima le tekanyo ea mocheso oa I/Os.
Sebakeng	Ka Boema-kepe ba Katoloso ea I/O. Kopanya ho fihla ho 8 I/O Katoloso ea li-Module tse kenyelletsang ho fihla ho 128 tse eketsehileng tsa I/O. Adapter e hlokahala (PN EX-A2X).
Hole	Ka CANbus port. Hokela li-adapter tse ka bang 60 ho isa bohole ba limithara tse 1000 ho tloha ho molaoli; le ho fihla ho 8 I / O li-module tsa katoloso ho adaptara ka 'ngoe (ho fihlela ho kakaretso ea 512 I / Os). Adapter ea hlokahala (PN EX-RC1).

Tse fapaneng
Oache (RTC)	Mesebetsi ea oache ea nako ea 'nete (letsatsi le nako)
Backup ea betri	Lilemo tse 7 tse tloaelehileng ho 25 ° C, bekapo ea betri bakeng sa RTC le data ea sistimi, ho kenyelletsa le data e fapaneng
Phetoho ea betri	Ee. Coin-mofuta oa 3V, betri ea lithium, CR2450

Litekanyo
Ntho		V130-B1 V130J-B1	V350-B1 V350J-B1	V430J-B1
Boholo	Vxxx	109 x 114.1 x 68mm (4.29 x 4.49 x 2.67"). Sheba Ntlha ea 6	109 x 114.1 x 68mm (4.29 x 4.49 x 2.67"). Sheba Ntlha ea 6
	Vxxx-J	109 x 114.1 x 66mm (4.92 x 4.49 x 2.59"). Sheba Ntlha ea 6	109 x 114.1 x 66mm (4.92 x 4.49 x 2.59"). Sheba Ntlha ea 6	136 x 105.1 x 61.3mm (5.35 x 4.13 x 2.41"). Sheba Ntlha ea 6
Boima ba 'mele		255g (9 oz)	270g (9.5 oz)	300g (10.5 oz)

Lintlha:
Bakeng sa boholo bo nepahetseng, sheba Tataiso ea ho Instola ea sehlahisoa.

Tikoloho
Mocheso oa ts'ebetso	0 ho isa ho 50ºC (32 ho isa ho 122ºF)
Mocheso oa polokelo	-20 ho 60ºC (-4 ho 140ºF)
Mongobo o Batlang (RH)	10% ho isa ho 95% (ha e fokotsehe)
Mokhoa oa ho kenya	Panele e kentsoeng (IP65/66/NEMA4X) DIN-rail e kentsoe (IP20/NEMA1)
Bophahamo ba Tshebetso	2000m (6562 ft)
Ho tshoha	IEC 60068-2-27, 15G, 11ms nako
Ho thothomela	IEC 60068-2-6, 5Hz ho 8.4Hz, 3.5mm kamehla amplitude, 8.4Hz ho isa ho 150Hz, ho potlakisa 1G.

Lintlha tse tokomaneng ena li bontša lihlahisoa ka letsatsi la khatiso. Unironic e na le tokelo, ho ipapisitsoe le melao eohle e sebetsang, ka nako efe kapa efe, ka boikhethelo ba eona, ntle le tsebiso, ho khaotsa kapa ho fetola likarolo, meralo, thepa le lintlha tse ling tsa lihlahisoa tsa eona, le ho tlosa ka ho sa feleng kapa ka nakoana. tse furallang mmarakeng.

Lintlha tsohle tse tokomaneng ena li fanoe "joalokaha li le" ntle le tiisetso ea mofuta ofe kapa ofe, e ka hlahisoang kapa e ka hlalosoang, ho kenyeletsoa empa e sa felle feela ho litiisetso tsa thekiso, ho sebetsa molemong o itseng, kapa ho se tlole molao. Unitrans ha e nke boikarabello bakeng sa liphoso kapa lintho tse sieo boitsebisong bo hlahisitsoeng tokomaneng ena. Ha ho ketsahalo eo Unironic e tla ikarabella bakeng sa tšenyo efe kapa efe e khethehileng, e sa lebelloang, e sa tobang kapa ea litlamorao ea mofuta ofe kapa ofe, kapa tšenyo efe kapa efe e hlahang kapa e amanang le ts'ebeliso kapa ts'ebetso ea tlhahisoleseling ena.

Mabitso a khoebo, matšoao a khoebo, li-logo le matšoao a litšebeletso a hlahisitsoeng tokomaneng ena, ho kenyeletsoa moralo oa tsona, ke thepa ea Unironic (1989) (R”G) Ltd. kapa batho ba bang ba boraro, 'me ha ua lumelloa ho li sebelisa ntle le tumello e ngotsoeng pele. tsa Unironic kapa motho oa boraro eo e ka bang mong'a tsona

Litokomane / Lisebelisoa

UNITRONICS V130-33-B1 Taolo ea Monahano e Reriloeng [pdf] Bukana ea Mosebelisi V130-33-B1, V130-J-B1, V350-35-B1, V350-J-B1, V430-J-B1, V130-33-B1 Programmable Logic Controller, V130-33-B1, Programmable Logic Controller, Logic Molaoli, Molaoli

Litšupiso

• Bukana ea Mosebelisi