UNITRONICS V1040-T20B Vision OPLC Batsamaisi ba Monahano ba Lenaneo
Tlhaloso e Akaretsang
Tataiso ena e fana ka lintlha tsa mantlha bakeng sa balaoli ba Unitronics V1040-T20B. Li-OPLC tsa V1040 ke li-control tsa logic tse hlophisehang tse kenyelletsang phanele ea ts'ebetso e hahelletsoeng e nang le 10.4 ”Colour Touchscreen. V1040 e fana ka linotlolo tsa ts'ebetso hammoho le keyboard ea alpha-numeric e hlahisoang ka bo eona ha sesebelisoa se hloka hore opareitara e kenye data.
Lipuisano
- Likou tse 2 tse ikhethileng tsa RS232/RS485
- Kou ea mananeo a USB (Mini-B)
- Boema-kepe bo ikhethileng ba CANbus
- Mosebedisi a ka odara le ho kenya boema-kepe bo eketsehileng. Sena e ka ba Ethernet kapa serial.
- Lithibelo tsa Mosebetsi oa Puisano li kenyelletsa: SMS, GPRS, MODBUS serial / IP; Protocol FB e thusa PLC ho buisana le hoo e ka bang sesebelisoa leha e le sefe sa kantle, ka likhokahano tsa serial kapa Ethernet
Likhetho tsa I / O
V1040 e ts'ehetsa li-I/O tsa dijithale, tsa lebelo le holimo, tsa analog, boima le mocheso ka:
- Snap-in I/O Modules Hokela ka morao ho molaoli ho fana ka tlhophiso ea I/O e leboteng.
- Li-I/O tsa Katoloso ea Li-I/O tsa lehae kapa tse hole li ka eketsoa ka boema-kepe ba katoloso kapa ka CANbus.
Litaelo tsa ho kenya le lintlha tse ling li ka fumanoa leqepheng la lintlha tsa tekheniki tsa module.
Mokhoa oa Boitsebiso
Mokhoa ona o u nolofalletsa ho:
- Lekanya skrine ea ho ama
- View & Hlophisa boleng ba tšebetso, li-setting tsa boema-kepe ba COM, RTC le litlhophiso tsa phapang/ khanya
- Emisa, qala, 'me u tsosolose PLC
Ho kenya Mokgwa wa Tlhahisoleseding, tobetsa skrineng sa ho thetsa ebe o boloka lebitso la hao metsotsoana e mmalwa.
Mananeo Software, & Utilities
CD ea Unitronics Setup e na le software ea VisiLogic le lisebelisoa tse ling
- VisiLogic Hlophisa hardware ha bonolo 'me u ngole lisebelisoa tsa taolo ea HMI le Ladder; laeborari ea Function Block e nolofatsa mesebetsi e rarahaneng joalo ka PID. Ngola kopo ea hau, ebe u e khoasolla ho molaoli ka thapo ea lenaneo e kenyellelitsoeng ka har'a khiti.
- Lisebelisoa Tsena li kenyelletsa seva sa UniOPC, Phihlelo ea Remote bakeng sa mananeo a hole le tlhahlobo, le DataXport bakeng sa ho rengoa ha data ka nako e sebetsang.
Ho ithuta ho sebelisa le ho hlophisa molaoli, hammoho le ho sebelisa lisebelisoa tse kang Remote Access, sheba ho VisiLogic Help system.
Polokelo ea Memori e Tlohang
Karete ea Micro-SD: polokelo ea data, Lialamo, Mekhoa, Litafole tsa Boitsebiso; romela kantle ho Excel; backup Ladder, HMI & OS 'me u sebelise data ena ho "clone" PLCs. Bakeng sa lintlha tse ling, sheba lihlooho tsa SD ho VisiLogic Help system.
Litafole tsa Lintlha
Litokomane tse ling tsa sehlahisoa li ho Technical Library, e teng ho www.unitronicsplc.com. Tšehetso ea tekheniki e fumaneha setšeng, le ho tloha support@unitronics.com.
Likahare tsa Standard Kit
| Taolo ea pono | Masakaneng a ho kenya (x8) | ||
| 3 Pin sehokelo sa phepelo ea matla | Tiiso ea rabara | ||
| 5 Pin sehokelo sa CANbus | |||
| Mohanyetsi oa ho emisa marang-rang oa CANbus | |||
| Betri (ha e ea kengoa) | |||
| Matšoao a Kotsi | |||
| Ha leha e le efe ea matšoao a latelang a hlaha, bala lintlha tse amanang le tsona ka hloko. | |||
| Letšoao | Tlhaloso | Tlhaloso | |
| Kotsi | Kotsi e boletsoeng e baka tšenyo ea 'mele le thepa. | ||
| Tlhokomediso | Kotsi e boletsoeng e ka baka tšenyo ea 'mele le thepa. | ||
| Tlhokomeliso | Tlhokomeliso | E-ba hlokolosi. | |
| § Pele o sebelisa sehlahisoa sena, mosebelisi o tlameha ho bala le ho utloisisa tokomane ena.
§ Tsohle exampli-les le litšoantšo li reretsoe ho thusa ho utloisisa, 'me ha li fane ka tiiso ea ts'ebetso. Unitronics ha e amohele boikarabello bakeng sa ts'ebeliso ea 'nete ea sehlahisoa sena ho latela li-examples. § Ka kopo, lahla sehlahisoa sena ho latela maemo le melaoana ea lehae le ea naha. § Ke basebetsi ba nang le litsebo feela ba lokelang ho bula sesebelisoa sena kapa ho etsa tokiso. |
|||
| Ho hloleha ho latela ditataiso tse nepahetseng tsa polokeho ho ka baka kotsi e mpe kapa tshenyo ya thepa. | |||
| § Se ke oa leka ho sebelisa sesebelisoa sena se nang le li-parameter tse fetang maemo a lumelletsoeng.
§ Ho qoba ho senya sistimi, o seke oa hokela / o hakolla sesebelisoa ha motlakase o le teng. |
|||
| Mehopolo ea Tikoloho | |
| § Se ke oa kenya libakeng tse nang le: lerōle le feteletseng kapa le nang le mocheso o mongata, khase e senyang kapa e tukang, mongobo kapa pula, mocheso o feteletseng, ts'oaetso ea kamehla kapa ho thothomela ho feteletseng, ho latela
ka litekanyetso tse fanoeng letlapeng la lintlha tsa tekheniki tsa sehlahisoa. |
|
|
|
§ Ho kenya moea: sebaka sa 10mm se hlokahalang lipakeng tsa mathōko a ka holimo/ka tlase le mabota a kampetsoeng.
§ Se ke oa beha ka metsing kapa ua lumella metsi hore a lutlele holim'a yuniti. § U se ke ua lumella lithōle ho oela ka har'a yuniti nakong ea ho kenya. § Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase. |
UL Compliance
Karolo e latelang e amana le lihlahisoa tsa Unitronics tse thathamisitsoeng le UL.
- Mohlala: V1040-T20B ke UL e thathamisitsoeng bakeng sa Libaka tse Kotsi.
T - mohlala: V1040-T20B ke UL e thathamisitsoeng bakeng sa Sebaka se Tloaelehileng.
UL Sebaka se Tloaelehileng
E le hore u finyelle maemo a tloaelehileng a sebaka sa UL, beha sesebelisoa sena sebakeng se bataletseng sa Mofuta oa 1 kapa oa 4 X o koaletsoeng Likarolo tsa UL, Balaoli ba Rerang ho Sebelisa Libakeng Tse Kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D
Lintlha tsena tsa Tokollo li amana le lihlahisoa tsohle tsa Unitronics tse nang le matšoao a UL a sebelisoang ho tšoaea lihlahisoa tse lumelletsoeng ho sebelisoa libakeng tse kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D.
| Tlhokomeliso | § Thepa ena e loketse ho sebelisoa ho Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D, kapa libakeng tse seng kotsi feela. | |
| § Wiring ea ho kenya le ho tsoa e tlameha ho lumellana le Sehlopha sa I, mekhoa ea terata ea Karolo ea 2 le ho latela bolaoli bo nang le matla a ho laola. | ||
| § TEMOSO—Kotsi ea Ho phatloha—ho fapanyetsana ha likarolo ho ka ’na ha sitisa ho tšoaneleha bakeng sa Sehlopha sa I, Karolo ea 2.
§ TLHOKOMELISO - KOTSI EA HO PHAHAMA - Se ke oa hokela kapa ua hakolla lisebelisoa ntle le haeba motlakase o tingoe kapa sebaka seo ho tsejoa hore ha se kotsi. TLHOKOMELISO - Ho pepesetsoa lik'hemik'hale tse ling ho ka theola thepa ea tiiso ea thepa e sebelisoang ho Relays. § Thepa ena e tlameha ho kenngoa ho sebelisoa mekhoa ea lithapo e hlokahalang bakeng sa Sehlopha sa I, Karolo ea 2 ho latela NEC le/kapa CEC. |
Phanele-Mounting
Bakeng sa li-controller tse ka hlophisoang le liphanele, molemong oa ho kopana le maemo a UL Haz Loc, beha sesebelisoa sena sebakeng se bataletseng sa mefuta ea 1 kapa mefuta ea 4X.
Puisano le Polokelo ea Mehopolo e Tlohang
Ha lihlahisoa li na le boema-kepe ba puisano ba USB, sekotjana sa karete ea SD, kapa ka bobeli, ha se sekotjana sa karete ea SD kapa boema-kepe ba USB ha lia rereloa ho hokela ruri, athe boema-kepe ba USB bo reretsoe ho etsa mananeo feela.
Ho ntsha/ Ho ntsha betri
Ha sehlahiswa se kentswe ka betri, o se ke wa ntsha kapa wa nkela betri sebaka ntle le haeba motlakase o timilwe, kapa sebaka seo ho tsejwa hore ha se kotsi.
Ka kopo hlokomela hore ho kgothaletswa ho boloka dintlha tsohle tse bolokiloeng ho RAM, e le ho qoba ho lahleheloa ke data ha u fetola betri ha matla a tima. Lintlha tsa letsatsi le nako le tsona li tla hloka ho hlophisoa bocha kamora ts'ebetso.
Ho kenya Battery
E le hore u boloke data haeba motlakase o tima, o tlameha ho kenya betri. Betri e fanoa 'me e khomaretsoe sekoahelong sa betri se ka morao ho molaoli.
- Tlosa sekoaelo sa betri se bontšitsoeng leqepheng la 6. Polarity (+) e tšoailoe setšeng sa betri le betri.
- Kenya betri, ho etsa bonnete ba hore letšoao la polarity betiring ke:
- ho sheba hodimo
- e tsamaellanang le letshwao le hodima setshoaro
- Tlosa sekwahelo sa betri.
Ho phahamisa
Litekanyo
Ho phahamisa Panel
Pele o qala, hlokomela hore phanele e ntseng e eketseha e ke ke ea ba botenya bo fetang 5 mm.
- Etsa phanele e khaotsoeng ho ea ka litekanyo tsa setšoantšo ho ea ka ho le letona.
- Tsamaisa selaoli sebakeng se sehiloeng, ho etsa bonnete ba hore tiiso ea rabara e teng.
- Sututsa li-brackets tse 8 ho li-slots tsa tsona mahlakoreng a molaoli joalo ka ha ho bonts'itsoe setšoantšong se ka ho le letona.
- Tiisa likurufu tsa borakete khahlano le phanele. Tšoara borakete ka mokhoa o sireletsehileng khahlano le yuniti ha u ntse u tiisa screw.
- Ha e kentsoe ka nepo, selaoli se lutse hantle ka har'a karolo e sehiloeng ea phanele joalo ka ha ho bonts'itsoe ka tlase.
Tlhokomeliso: Torque e hlokahalang ke 0.45 N · m (4.5 kgf·cm).
Wiring
Kotsi
- U se ke ua tšoara lithapo tse phelang.
Tlhokomediso
- Kenya sekhechana sa potoloho se kantle. Itebele khahlanong le short-circuiting ka terata e kantle.
- Sebelisa lisebelisoa tse nepahetseng tsa tšireletso ea potoloho.
- Lithako tse sa sebelisoeng ha lia lokela ho kopanngoa. Ho iphapanyetsa taelo ena ho ka senya sesebelisoa.
- Lekola lithapo tsohle habeli pele o bulela phepelo ea motlakase.
Tlhokomeliso
- Ho qoba ho senya terata, u se ke ua feta torque e kholo ea 0.5 N·m (5 kgf·cm).
- Se ke oa sebelisa thini, solder kapa ntho leha e le efe holim'a terata e hlobotseng e ka etsang hore khoele ea terata e khaohe.
- Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase.
Mokhoa oa ho Wiring
Sebelisa li-terminals tsa crimp bakeng sa wiring; sebelisa terata ea 26-12 AWG (0.13 mm 2–3.31 mm2).
- Hlobola terata ho bolelele ba 7±0.5mm (0.250-0.300 inches).
- Hlakola theminale sebakeng sa yona se sephara ka ho fetisisa pele o kenya terata.
- Kenya terata ka botlalo ho theminale ho netefatsa hore ho na le khokahanyo e nepahetseng.
- Tiisa ho lekana hore terata e se ke ea hula ka bolokolohi.
Phepelo ea motlakase
Taolo ea V1040-T20B e hloka motlakase oa kantle oa 12 kapa 24VDC. Kenyeletso e dumelletsweng voltagmefuta ea e: 10.2-28.8VDC, e nang le ripple e ka tlase ho 10%.
Kotsi
- Motlakase o tlameha ho kenyelletsa ho pata habeli. Lintho tse hlahisoang li tlameha ho behoa joalo ka SELV/PELV/Class 2/Limited Power.
- Se ke oa hokela lets'oao la 'Neutral kapa' Line' la 110/220VAC ho phini ea 0V ea sesebelisoa.
Tlhokomediso
- Kenya sekhechana sa potoloho se kantle. Itebele khahlanong le short-circuiting ka terata e kantle.
- Lekola lithapo tsohle habeli pele o bulela phepelo ea motlakase.
- Ketsahalong ea voltage ho feto-fetoha kapa ho se lumellane le voltage lintlha tsa phepelo ea motlakase, hokela sesebelisoa ho phepelo ea motlakase e laoloang.
Ho hlahisa OPLC
Ho eketsa ts'ebetso ea sistimi, qoba tšitiso ea motlakase ka:
- Ho kenya molaoli holim'a phanele ea tšepe.
- Hokela terminal ea lefatše e sebetsang ea OPLC, le mehala e tloaelehileng le ea motheo ea li-I/O, ka kotloloho mobung oa sistimi ea hau.
- Bakeng sa terata ea fatše, sebelisa terata e khutšoanyane le e teteaneng ka ho fetisisa.
Li-Ports tsa puisano
Letoto lena le na le boema-kepe ba USB, boema-kepe ba 2 RS232/RS485 le boema-kepe ba CANbus. Boema-kepe bo eketsehileng bo ka laeloa ka thoko le ho kenngoa. Kou ena e kanna ea ba Ethernet, kapa serial (COM 3). Bakeng sa tlhaiso-leseling e ntlafalitsoeng ka ho fetesisa mabapi le likou le ho kengoa ha tsona, ka kopo sheba Laeborari ea Tekheniki ho www.unitronics.com.
Kotsi
- Phetla tima motlakase pele o etsa dikgokelo tsa dipuisano.
Tlhokomeliso
- Kamehla sebelisa li-adapter tse loketseng tsa koung.
Boema-kepe ba USB bo ka sebelisoa bakeng sa ho etsa mananeo, ho jarolla OS, le phihlello ea komporo. Hlokomela hore ts'ebetso ea COM port 1 e emisoa ha boema-kepe bona bo hokahane le PC. Likou tsa serial ke mofuta oa RJ-11 'me li ka hlophisoa ho RS232 kapa RS485 ka li-switches tsa DIP, ho latela tafole e bontšitsoeng ka tlase. Sebelisa RS232 ho khoasolla mananeo ho tsoa komporong, le ho buisana le lisebelisoa tsa serial le lits'ebetso, joalo ka SCADA. Sebelisa RS485 ho theha marang-rang a marotholi a mangata a nang le lisebelisoa tse fihlang ho 32.
Pinouts
Li-pinouts tse ka tlase li bonts'a matšoao a boema-kepe ba PLC. Ho hokela PC boema-kepe bo hlophisitsoeng ho RS485, tlosa sehokelo sa RS485, 'me u hokele PC ho PLC ka thapo ea lenaneo. Hlokomela hore sena se ka khoneha feela haeba matšoao a ho laola phallo a sa sebelisoe (e leng boemo bo tloaelehileng).
*Lithapo tse tloaelehileng tsa lenaneo ha li fane ka lintlha tsa khokahanyo bakeng sa Pins 1 le 6.
**Ha kou e ikamahanya le RS485, Pin 1 (DTR) e sebelisetsoa lets'oao la A, 'me lets'oao la Pin 6 (DSR) le sebelisetsoa lets'oao la B.
RS232 ho RS485: Ho Fetola Litlhophiso tsa Phetoho ea DIP
Likou li behiloe ho RS232 ka mokhoa oa feme. Ho fetola litlhophiso, qala ka ho tlosa Snap-in I/O Module, haeba e kentsoe, ebe u beha li-switches ho latela tafole e latelang.
RS232/RS485: DIP Switch Settings
Litlhophiso tse ka tlase ke tsa boema-kepe bo bong le bo bong ba COM.
| Fetola Lisebelisoa | ||||||
| 1 | 2 | 3 | 4 | 5 | 6 | |
| RS232 * | ON | ON | ON | TLOA | ON | TLOA |
| RS485 | TLOA | TLOA | TLOA | ON | TLOA | ON |
| RS485 ha e felisoe ** | ON | ON | TLOA | ON | TLOA | ON |
* Litlhophiso tsa feme ea kamehla
**E etsa hore yuniti e sebetse e le yuniti ea pheletso ho netweke ea RS485.
Ho kenya Snap-in I/O Module
Tlhokomediso
- Pele o kenya Snap-In Module, etsa bonnete ba hore Sekoaelo sa Mojule oa Puisano se koetsoe.
- Tlosa sekoahelo sa I/O se bontšitsoeng leqepheng la 6.
- Tsamaisa litataiso tse selikalikoe ho Snap-in I/O Module ka li-slots ho molaoli joalo ka ha ho bonts'itsoe ka tlase.
- Sebelisa esita le khatello likhutlong tsohle tse 4 ho fihlela u utloa 'tobetsa' e ikhethang. Hona joale module e kentsoe. Etsa bonnete ba hore mahlakore le likhutlo tsohle li hlophisitsoe hantle.
Ho tlosa Snap-in I/O Module
- Fumana likonopo tse 'nè mahlakoreng a molaoli, tse peli ka lehlakoreng le leng.
- Tobetsa likonopo ebe u li tšoara fatše ho bula mochine oa ho notlela.
- Ka bonolo sisinya module ho tloha ka lehlakoreng le leng ho ea ho le leng, ho nolofatsa module ho tloha ho molaoli.
CANbus
Balaoli bana ba kenyelletsa boema-kepe ba CANbus. Sebelisa
sena ho theha marangrang a taolo a arolelanoang a sebelisa
e 'ngoe ea mekhoa e latelang ea CAN:
-
CANopen: balaoli ba 127 kapa lisebelisoa tsa kantle
- CANLayer 2, J1939
- UniCAN e nang le thepa ea Unitronics: balaoli ba 60, (li-byte tsa data tse 512 ka skena)
Boema-kepe ba CANbus bo qheletsoe ka thoko.
CANbus Wiring
Sebelisa thapo e sothehileng. Ho khothaletsoa thapo e sothehileng ea DeviceNet® e teteaneng e sirelelitsoeng.
Li-terminators tsa marang-rang: Tsena li fanoa ka molaoli. Beha li-terminators pheletsong e 'ngoe le e 'ngoe ea marang-rang a CANbus. Ho hanyetsa ho tlameha ho behoa ho 1%, 121Ω, 1/4W. Hokela lets'oao la fatše lefatšeng sebakeng se le seng feela, haufi le phepelo ea motlakase. Matla a marang-rang ha a hloke ho ba qetellong ea marang-rang.
Sehokelo sa CANbus
Litlhaloso tsa Tekheniki
| Phepelo ea motlakase | |
| Keletso voltage | 12 kapa 24VDC |
| Sebaka se lumelletsoeng | 10.2-28.8VDC |
| Max. tshebediso ya jwale | 840mA @ 12V
420mA @ 24V |
| Betri | |
| Ntlafatsa | Lilemo tse 7 tse tloaelehileng ho 25 ° C, bekapo ea betri bakeng sa RTC le data ea sistimi, ho kenyelletsa le data e fapaneng. |
| E ka nkeloang sebaka | E, ntle le ho bula molaoli. |
| Skrine ea Pontšo ea Graphic | Sheba Hlokomela 1 |
| Mofuta oa LCD | TFT |
| Lebone la morao la khanya | LED e tšoeu |
| Bontša qeto, lipikselse | 800×600 (SVGA) |
| Viewsebaka | 10.4″ |
| Mebala | 65,536 (16-bit) |
| Skrine se thetsoang | Ho hanyetsa, analogue |
| Pontšo ea 'Touch' | Ka buzzer |
| Khanya ea skrine | Ka software (Boleng ba polokelo ho SI 9). |
| Keypad | E hlahisa keyboard ea sebele ha sesebelisoa se hloka ho kenngoa ha data. |
| Lintlha: | |
| 1. Hlokomela hore skrine ea LCD e ka ba le pixel e le 'ngoe e sa feleng e ka ba e ntšo kapa e tšoeu. | |
Keypad
Nomoro ea linotlolo: Likonopo tse 9 tse ka sebelisoang
Mofuta oa bohlokoa: Dome ea tšepe, switch e tiisitsoeng ea membrane
Lenaneo
Boholo ba memori: Logic ea Kopo - 2MB, Litšoantšo - 80MB, Lifonti - 1MB
| Mofuta oa operand | Bongata | Letšoao | Boleng |
| Likotoana tsa memori | 8192 | MB | Bit (khola) |
| Lintlha tsa Memori | 4096 | MI | 16-bit |
| Linomoro tse telele | 512 | ML | 32-bit |
| Mantsoe a Habeli | 256 | DW | 32-bit e sa saenneng |
| Mehopolo E phaphamala | 64 | MF | 32-bit |
| Lisebelisoa tsa nako | 384 | T | 32-bit |
| Libali | 32 | C | 16-bit |
Litafole tsa Boitsebiso: Lintlha tsa RAM tse matla tsa 120K (litekanyetso tsa recipe, litlaleho tsa data, joalo-joalo) Up tp 256K Flash data
HMI e hlahisa: Ho fihlela ho 1024
Nako ea ho hlahloba lenaneo: 9 μsec ka 1K ea ts'ebeliso e tloaelehileng
| Mehopolo e Tlohang | ||
| Karete ea Micro-SD | E lumellana le likarete tsa micro-SD tse potlakileng; boloka boitsebiso, Alarms, Trends, Data Tables, bekapo Ladder, HMI, le OS. Sheba Tlhokomeliso 2 | |
| Lintlha: | ||
| 2. Mosebelisi o tlameha ho fomata ka lisebelisoa tsa Unitronics SD. | ||
Puisano
| Likou tsa serial | 2. Sheba Tlhokomeliso 3 | ||
| RS232 | |||
| Ho itšehla thajana ka Galvanic | Ee | ||
| Moqtage meeli | ± 20VDC ka ho feletseng | ||
| Lebelo la sekhahla sa Baud | 300 ho isa ho 115200 bps | ||
| Bolelele ba thapo | Ho fihla ho 15m (50') | ||
| RS485 | |||
| Ho itšehla thajana ka Galvanic | Ee | ||
| Moqtage meeli | -7 ho + 12VDC boholo bo fapaneng | ||
| Lebelo la sekhahla sa Baud | 300 ho isa ho 115200 bps | ||
| Nodes | Ho fihlela ho 32 | ||
| Mofuta oa thapo | Lipara tse sothehileng tse sirelelitsoeng, ho latela EIA RS485 | ||
| Bolelele ba thapo | 1200m boholo (4000') | ||
| USB | Sheba Hlokomela 4 | ||
| Mofuta oa boema-kepe | Mini-B | ||
| Ho itšehla thajana ka Galvanic | Che | ||
| Tlhaloso | USB 2.0 e lumellana; lebelo le tletseng | ||
| Lebelo la sekhahla sa Baud | 300 ho isa ho 115200 bps | ||
| Cable | USB 2.0 e lumellana; ho fihlela ho 3m | ||
| Boema-kepe ba CANbus | 1 | ||
| Nodes | CANopen | Liprothokholo tsa Unitronics' tsa CANbus | |
| 127 | 60 | ||
| Litlhoko tsa matla | 24VDC (± 4%), 40mA max. ka yuniti. Sheba Tlhokomeliso 5 | ||
| Ho itšehla thajana ka Galvanic | E, lipakeng tsa CANbus le molaoli | ||
| Bolelele ba thapo/sekhahla sa baud Sheba Tlhokomeliso | 25 m
100 m 250 m 500 m 500 m 1000 limithara 1000 limithara |
1 Mbit/s
500 Kbps 250 Kbps 125 Kbps 100 Kbps 50 Kbps 20 Kbps |
|
| * Haeba o hloka bolelele ba thapo ho feta limithara tse 500, ikopanye le tšehetso ea tekheniki. | |||
| Boema-kepe ba boikhethelo | Mosebelisi a ka kenya boema-kepe bo le bong ba Ethernet, kapa boema-kepe ba RS232/RS485. E fumaneha ka odara e arohaneng. | ||
| Lintlha: | |||
| 3. Tekanyetso ea boema-kepe bo bong le bo bong e behiloe ho RS232/RS485 ho latela litlhophiso tsa switjha tsa DIP. Sheba Tataiso ea Tlhophiso.
4. Boema-kepe ba USB bo ka sebelisoa ho etsa mananeo, ho jarolla OS, le phihlello ea komporo. Hlokomela hore ts'ebetso ea COM port 1 e emisoa ha boema-kepe bona bo hokahane le komporo. 5. E ts'ehetsa motlakase oa 12 le 24VDC CANbus ka bobeli, (± 4%), 40mA boholo ka yuniti. Hlokomela hore haeba 12 VDC e sebelisoa, bolelele bo boholo ba cable ke 150 metres. |
|||
| Ke / Os | |
| Palo ea li-I/O le mefuta e fapana ho ea ka mojule. E ts'ehetsa ho fihla ho 1024 dijithale, lebelo le phahameng, le li-I/O tsa analoge. | |
| Snap-in I/O modules | E hokela koung e ka morao ho theha PLC e ikemetseng e nang le li-I/O tse fihlang ho 62. |
| Li-module tsa katoloso | Adapter ea lehae (PN EX-A1), ka I/O Katoloso Port. Kopanya ho fihla ho 8 I/O Katoloso ea li-Module tse kenyelletsang ho fihla ho 128 tse eketsehileng tsa I/O.
Adapter e hole (PN EX-RC1), ka sekepe sa CANbus. Hokela li-adapter tse ka bang 60; hokela ho fihla ho li-module tse 8 tsa katoloso ea I/O ho adaptara ka 'ngoe. |
| Exp. ho itšehla thajana | SeGalvanic |
| Litekanyo | |
| Boholo | 289X244.5X59.1mm )11.37″X9.62″X2.32″). Sheba Tlhokomeliso 6 |
| Boima ba 'mele | 1.5kg (52.9 oz) |
| Lintlha: | |
| 6. Bakeng sa boholo bo nepahetseng, sheba Tataiso ea ho Instola ea sehlahisoa. | |
| Ho phahamisa | |
| Ho kenya liphanele | Ka masakana |
| Tikoloho | |
| Ka hare ho cabinet | IP20 / NEMA1 (nyeoe) |
| Panele e kentsoeng | IP65 / NEMA4X (phanele e ka pele) |
| Mocheso oa ts'ebetso | 0 ho isa ho 50ºC (32 ho isa ho 122ºF) |
| Mocheso oa polokelo | -20 ho 60ºC (-4 ho 140ºF) |
| Mongobo o Batlang (RH) | 5% ho isa ho 95% (ha e fokotsehe) |
Litokomane / Lisebelisoa
 |
UNITRONICS V1040-T20B Vision OPLC Batsamaisi ba Monahano ba Lenaneo [pdf] Tlhophiso Tataiso V1040-T20B, Vision OPLC Programmable Logic Controllers, Vision OPLC, Programmable Logic Controllers, V1040-T20B Vision OPLC Programmable Logic Controllers |
