UNITRONICS V1040-T20B Vision OPLC Masu Gudanar da Dabarun Shirye-shiryen

Babban Bayani

Wannan jagorar tana ba da mahimman bayanai don masu kula da Unitronics V1040-T20B. V1040 OPLCs masu kula da dabaru ne masu shirye-shirye waɗanda suka ƙunshi ginannen panel mai aiki da ke ɗauke da allon taɓawa mai launi 10.4. V1040 yana ba da maɓallan ayyuka tare da maɓalli na alpha-lamba wanda ake nunawa ta atomatik lokacin da aikace-aikacen ke buƙatar mai aiki ya shigar da bayanai.

Sadarwa

• 2 keɓaɓɓen tashar jiragen ruwa RS232/RS485
• Kebul na shirye-shiryen tashar jiragen ruwa (Mini-B)
• Tashar tashar CANbus keɓe
• Mai amfani zai iya yin oda da shigar da ƙarin tashar jiragen ruwa. Wannan na iya zama ko dai Ethernet ko serial.
• Tubalan Ayyukan Sadarwa sun haɗa da: SMS, GPRS, MODBUS serial/IP; Protocol FB yana bawa PLC damar sadarwa tare da kusan kowace na'ura ta waje, ta hanyar sadarwar serial ko Ethernet

 

Zaɓuɓɓukan I/O

V1040 tana goyan bayan dijital, babban sauri, analog, nauyi da ma'aunin zafin jiki I/Os ta:

• Snap-in I/O Modules Toshe cikin bayan mai sarrafawa don samar da saitin I/O akan kan jirgi
• I/O Expansion Modules Za a iya ƙara I/O na gida ko na nesa ta tashar fadada ko CANbus.

Ana iya samun umarnin shigarwa da sauran bayanai a cikin takardar ƙayyadaddun fasaha na ƙirar.

Yanayin Bayani

Wannan yanayin yana ba ku damar:

• Daidaita allon taɓawa
• View & Shirya dabi'u na operand, saitunan tashar tashar COM, RTC da bambancin allo/ saitunan haske
• Tsaya, fara, kuma sake saita PLC

Don shigar da Yanayin Bayani, danna allon taɓawa kuma kula da lamba na daƙiƙa da yawa.

Shirye-shiryen Software, & Utilities

Saitin CD ɗin Unitronics ya ƙunshi software na VisiLogic da sauran abubuwan amfani

• VisiLogic Sauƙaƙe daidaita kayan aiki da rubuta duka HMI da aikace-aikacen sarrafa tsani; Laburaren Ayyukan Block yana sauƙaƙe ayyuka masu rikitarwa kamar PID. Rubuta aikace-aikacen ku, sannan zazzage shi zuwa ga mai sarrafawa ta hanyar kebul na shirye-shirye da ke cikin kit ɗin.
• Abubuwan amfani Waɗannan sun haɗa da uwar garken UniOPC, Samun Nesa don shirye-shiryen nesa da bincike, da DataXport don shigar da bayanai na lokaci.

Don koyon yadda ake amfani da tsara mai sarrafawa, da kuma amfani da abubuwan amfani kamar Nesa Dama, koma zuwa tsarin Taimakon VisiLogic.

Ma'ajiyar Ƙwaƙwalwar Cirewa

Katin Micro-SD: ɗakunan ajiya na bayanai, Ƙararrawa, Trends, Tables Data; fitarwa zuwa Excel; madadin Ladder, HMI & OS kuma amfani da wannan bayanan zuwa 'clone' PLCs. Don ƙarin bayanai, koma zuwa batutuwan SD a cikin tsarin Taimakon VisiLogic.

Tables Data

Ƙarin takaddun samfurin yana cikin Laburaren Fasaha, wanda yake a www.unitronicsplc.com. Ana samun tallafin fasaha a wurin, kuma daga support@unitronics.com.

Daidaitaccen Abubuwan Abubuwan Kit

Mai sarrafa hangen nesa			Maƙallan hawa (x8)
3 fil mai haɗa wutar lantarki			Rubber hatimi
5 pin CANbus connector
CANbus network termination resistor
Baturi (ba a shigar da shi ba)
Alamomin Hatsari
Lokacin da ɗayan waɗannan alamomin suka bayyana, karanta bayanan haɗin gwiwa a hankali.
Alama		Ma'ana	Bayani
		hadari	Hadarin da aka gano yana haifar da lalacewar jiki da ta dukiya.
		Gargadi	Hatsarin da aka gano na iya haifar da asarar ta jiki da ta dukiya.
Tsanaki		Tsanaki	Yi amfani da hankali.
§ Kafin amfani da wannan samfurin, mai amfani dole ne ya karanta kuma ya fahimci wannan takarda. § Duk examples da zane-zane an yi nufin su taimaka fahimta, kuma ba su da garantin aiki. Unitronics ba ta karɓar alhakin ainihin amfani da wannan samfurin bisa waɗannan tsoffinamples. Da fatan za a zubar da wannan samfurin bisa ga ƙa'idodi da ƙa'idodi na gida da na ƙasa.   ƙwararrun ma'aikatan sabis ne kawai ya kamata su buɗe wannan na'urar ko su yi gyara.
	Rashin bin ƙa'idodin tsaro masu dacewa na iya haifar da mummunan rauni ko lalacewar dukiya.
	§ Kada kayi ƙoƙarin amfani da wannan na'urar tare da sigogi waɗanda suka wuce matakan izini. § Don guje wa lalata tsarin, kar a haɗa/ cire haɗin na'urar lokacin da wuta ke kunne.

La'akarin Muhalli
	§ Kada a sanyawa a cikin wuraren da: ƙura mai wuce gona da iri, gurɓataccen iskar gas ko mai ƙonewa, danshi ko ruwan sama, zafi mai yawa, girgiza tasirin yau da kullun ko girgiza mai wuce kima, daidai da tare da ƙa'idodin da aka bayar a cikin takardar ƙayyadaddun fasaha na samfur.
	§ Samun iska: 10mm sarari da ake buƙata tsakanin saman mai sarrafawa / gefuna na ƙasa & bangon shinge. § Kada a sanya a cikin ruwa ko barin ruwa ya zubo kan naúrar. § Kar ka bari tarkace su fada cikin naúrar yayin shigarwa. § Shigarwa a iyakar nisa daga babban voltage igiyoyi da kayan wuta.

Farashin UL

Sashe mai zuwa ya dace da samfuran Unitronics waɗanda aka jera tare da UL.

• Samfurin: V1040-T20B UL ne da aka jera don wurare masu haɗari.
  T
• shi model: V1040-T20B ne UL jera don Talakawa Location.

UL Talakawa Wuri
Domin saduwa da ma'aunin wurin UL na yau da kullun, panel-hana wannan na'urar akan shimfidar shimfidar wuri na Nau'in 1 ko 4 X yana rufe UL Ratings, Masu Gudanar da Shirye-shiryen don Amfani a Wurare masu haɗari, Class I, Division 2, Rukunin A, B, C da D
Waɗannan Bayanan Bayanin Sakin suna da alaƙa da duk samfuran Unitronics waɗanda ke ɗauke da alamun UL da aka yi amfani da su don yiwa samfuran da aka yarda don amfani a wurare masu haɗari, Class I, Division 2, Rukunin A, B, C da D.

Tsanaki	§ Wannan kayan aikin ya dace don amfani a cikin Class I, Division 2, Rukunin A, B, C da D, ko wurare marasa haɗari kawai.
	§ Input da fitarwa wayoyi dole ne su kasance daidai da Class I, Rarraba 2 hanyoyin wayoyi kuma daidai da ikon da ke da iko.
	GARGAƊI—Haɗarin fashewa—Masanin abubuwan da ke tattare da shi na iya ɓata dacewa ga Class I, Division 2. GARGAƊI – HAZARAR FASUWA – Kar a haɗa ko cire haɗin kayan aiki sai dai idan an kashe wuta ko kuma an san wurin ba shi da haɗari. GARGAƊI – Bayyanawa ga wasu sinadarai na iya lalata kaddarorin hatimin kayan da aka yi amfani da su a Relays. § Dole ne a shigar da wannan kayan aiki ta amfani da hanyoyin wayoyi kamar yadda ake buƙata don Class I, Division 2 kamar yadda NEC da/ko CEC ta tanadar.

Panel-Mounting
Don masu sarrafa shirye-shirye waɗanda za a iya saka su kuma a kan bangarori, don saduwa da ma'aunin UL Haz Loc, panel-hana wannan na'urar akan shimfidar shimfidar Nau'in 1 ko Nau'in 4X.
Sadarwa da Ma'ajiyar Ƙwaƙwalwar Cirewa
Lokacin da samfuran suka ƙunshi ko dai tashar sadarwar USB, Ramin katin SD, ko duka biyun, ba ramin katin SD ko tashar USB ba ana nufin haɗa su ta dindindin, yayin da tashar USB an yi niyya don shirye-shirye kawai.
Cire / Maye gurbin baturi
Lokacin da aka shigar da samfur tare da baturi, kar a cire ko musanya baturin sai dai idan an kashe wuta, ko kuma an san wurin ba shi da haɗari.
Lura cewa ana ba da shawarar adana duk bayanan da ke cikin RAM, don guje wa asarar bayanai lokacin canza baturi yayin da aka kashe wuta. Hakanan ana buƙatar sake saita bayanan kwanan wata da lokaci bayan aikin.

Saka Batirin

Domin adana bayanai idan aka kashe wuta, dole ne ka saka baturin. Ana ba da baturin kuma an buga shi zuwa murfin baturin da ke bayan mai sarrafawa.

1. Cire murfin baturin da aka nuna a shafi na 6. Alamar polarity (+) tana kan mariƙin baturi da kan baturin.
2. Saka baturin, tabbatar da cewa alamar polarity akan baturin shine:
   • fuskantar sama
   • daidaita da alamar akan mariƙin
3. Sauya murfin baturin.

Yin hawa

Girma

Ruwa na Panel

Kafin ka fara, lura cewa hawan panel ba zai iya zama fiye da 5 mm lokacin farin ciki ba.

1. Yi yankan panel bisa ga ma'auni a cikin adadi zuwa dama.
2. Zamar da mai sarrafawa a cikin yanke, tabbatar da cewa hatimin roba yana wurin.
3. Tura madaidaicin hawa 8 a cikin ramummuka a gefen mai sarrafawa kamar yadda aka nuna a adadi zuwa dama.
4. Matsa madaidaicin sukurori a kan panel. Riƙe madaidaicin amintacce akan naúrar yayin da kuke ƙara matsawa.
5. Lokacin da aka ɗora shi da kyau, mai sarrafa yana nan daidai a cikin yanke panel kamar yadda aka nuna a ƙasa.

Tsanaki: Matsalolin da ake buƙata shine 0.45 N·m (4.5 kgf·cm).

Waya

hadari

• Kar a taɓa wayoyi masu rai.

Gargadi

• Shigar da na'urar kashewa ta waje. Kare gajeriyar kewayawa a cikin wayoyi na waje.
• Yi amfani da na'urorin kariya da suka dace.
• Kada a haɗa fil ɗin da ba a yi amfani da shi ba. Yin watsi da wannan umarnin na iya lalata na'urar.
• Bincika duk wayoyi sau biyu kafin kunna wutar lantarki.

Tsanaki

• Don guje wa lalata waya, kar a wuce iyakar ƙarfin 0.5 N·m (5 kgf·cm).
• Kada a yi amfani da gwano, solder, ko wani abu akan fitaccen waya wanda zai iya sa igiyar waya ta karye.
• Sanya a matsakaicin nisa daga babban-voltage igiyoyi da kayan wuta.

Tsarin Waya
Yi amfani da crimp tashoshi don wayoyi; yi amfani da 26-12 AWG waya (0.13 mm 2-3.31 mm2).

1. Cire waya zuwa tsayin 7± 0.5mm (0.250-0.300 inci).
2. Cire tashar zuwa mafi girman matsayi kafin saka waya.
3. Saka waya gaba daya a cikin tashar don tabbatar da haɗin kai mai kyau.
4. Maƙarƙashiya don kiyaye waya daga ja kyauta.

Tushen wutan lantarki

V1040-T20B mai sarrafawa yana buƙatar ko dai na waje 12 ko 24VDC samar da wutar lantarki. Halaltaccen shigarwa voltage kewayon: 10.2-28.8VDC, tare da kasa da 10% ripple.

hadari

• Dole ne samar da wutar lantarki ya haɗa da rufin biyu. Dole ne a ƙididdige abubuwan da aka fitar azaman SELV/PELV/Class 2/Ikantaccen Ƙarfi.
• Kar a haɗa ko dai siginar 'Neutral ko' Layi' na 110/220VAC zuwa fil ɗin 0V na na'urar.

Gargadi

• Shigar da na'urar kashewa ta waje. Kare gajeriyar kewayawa a cikin wayoyi na waje.
• Bincika duk wayoyi sau biyu kafin kunna wutar lantarki.
• A cikin lamarin voltage sauye-sauye ko rashin daidaituwa ga voltage Ƙayyadaddun wutar lantarki, haɗa na'urar zuwa tsarin samar da wutar lantarki.

Farashin OPLC

Don haɓaka aikin tsarin, guje wa tsangwama ta hanyar:

• Hawan mai sarrafawa akan karfen karfe.
• Haɗa tashar tashar ƙasa mai aiki na OPLC, da gama gari da layin ƙasa na I/Os, kai tsaye zuwa ƙasan tsarin ku.
• Don yin wayoyi na ƙasa, yi amfani da waya mafi guntu kuma mafi kauri.

Tashoshin Sadarwa

Wannan jerin ya ƙunshi tashar USB, 2 RS232/RS485 serial port da tashar CANbus. Ana iya yin odar ƙarin tashar jiragen ruwa daban kuma a shigar. Wannan tashar jiragen ruwa na iya zama ko dai Ethernet, ko serial (COM 3). Don ƙarin cikakkun bayanai game da tashoshin jiragen ruwa da shigarwar su, da fatan za a duba Laburaren Fasaha a www.unitronics.com.

hadari

• Juyawa kashe wuta kafin yin hanyoyin sadarwa.

Tsanaki 

• Yi amfani da adaftan tashar tashar jiragen ruwa koyaushe.

Ana iya amfani da tashar USB don shirye-shirye, zazzagewar OS, da samun damar PC. Lura cewa an dakatar da aikin COM tashar jiragen ruwa 1 lokacin da aka haɗa wannan tashar ta jiki zuwa PC. Serial tashoshin jiragen ruwa nau'in RJ-11 ne kuma ana iya saita su zuwa ko dai RS232 ko RS485 ta hanyar sauya DIP, daidai da tebur da aka nuna a ƙasa. Yi amfani da RS232 don zazzage shirye-shirye daga PC, da kuma sadarwa tare da na'urori da aikace-aikace, kamar SCADA. Yi amfani da RS485 don ƙirƙirar cibiyar sadarwa mai ɗimbin yawa mai ɗauke da na'urori 32.

Pinouts

Abubuwan da ke ƙasa suna nuna alamun tashar tashar PLC. Don haɗa PC zuwa tashar jiragen ruwa da aka saita zuwa RS485, cire haɗin RS485, kuma haɗa PC zuwa PLC ta hanyar kebul na shirye-shirye. Lura cewa wannan yana yiwuwa ne kawai idan ba a yi amfani da siginar sarrafa kwarara ba (wanda shine daidaitaccen yanayin).

* Matsakaicin igiyoyin shirye-shirye ba sa samar da wuraren haɗi don fil 1 da 6.
** Lokacin da aka daidaita tashar jiragen ruwa zuwa RS485, ana amfani da Pin 1 (DTR) don siginar A, kuma ana amfani da siginar Pin 6 (DSR) don siginar B.
RS232 zuwa RS485: Canja Saitunan Canja DIP
An saita tashoshin jiragen ruwa zuwa RS232 ta tsohuwar masana'anta. Don canza saitunan, fara cire Snap-in I/O Module, idan an shigar da ɗaya, sannan saita maɓalli bisa ga tebur mai zuwa.
RS232/RS485: Saitunan Sauya DIP
Saitunan da ke ƙasa suna don kowane tashar COM.

	Canja Saituna
	1	2	3	4	5	6
RS232*	ON	ON	ON	KASHE	ON	KASHE
Saukewa: RS485	KASHE	KASHE	KASHE	ON	KASHE	ON
RS485 tare da ƙarewa ***	ON	ON	KASHE	ON	KASHE	ON

* Saitin masana'anta na asali
** Yana sa naúrar tayi aiki azaman naúrar ƙarshe a cibiyar sadarwar RS485.

Sanya Module I/O Snap-in

Gargadi

• Kafin shigar da Module Snap-In, tabbatar cewa an rufe murfin Module na Sadarwa.

1. Cire hular haɗin I/O da aka nuna akan shafi na 6.
2. Yi layi da jagororin madauwari akan Module Snap-in I/O tare da ramummuka akan mai sarrafawa kamar yadda aka nuna a ƙasa.
3. Aiwatar ko da matsi akan duk kusurwoyi 4 har sai kun ji wani takamaiman 'danna'. An shigar da tsarin yanzu. Bincika cewa duk bangarorin da sasanninta sun daidaita daidai.

Cire Module I/O Snap-in

1. Nemo maɓallai huɗu a gefen mai sarrafawa, biyu a kowane gefe.
2. Danna maɓallan kuma ka riƙe su ƙasa don buɗe hanyar kullewa.
3. A hankali girgiza module ɗin daga gefe zuwa gefe, sauƙaƙe tsarin daga mai sarrafawa.

CANbus

Waɗannan masu sarrafa sun ƙunshi tashar CANbus. Amfani
wannan don ƙirƙirar cibiyar sadarwa mai sarrafawa ta amfani da shi
ɗaya daga cikin ka'idojin CAN masu zuwa:

• CAN Buɗe: 127 masu sarrafawa ko na'urorin waje
• CANLayer 2, J1939
• UniCAN ta mallaka ta Unitronics: masu sarrafawa 60, (bayanin bayanan 512 a kowane scan)

Tashar jiragen ruwa ta CANbus ta keɓe.
CANbus Wiring
Yi amfani da kebul na murɗaɗi-biyu. DeviceNet® mai kauri mai kauri mai kauri mai murɗaɗɗen kebul ana shawarar.
Ƙarshen hanyar sadarwa: Ana kawo waɗannan tare da mai sarrafawa. Sanya masu ƙarewa a kowane ƙarshen hanyar sadarwar CANbus. Dole ne a saita juriya zuwa 1%, 121Ω, 1/4W. Haɗa siginar ƙasa zuwa ƙasa a wuri ɗaya kawai, kusa da wutar lantarki. Ba dole ba ne wutar lantarki ta hanyar sadarwa ta kasance a ƙarshen hanyar sadarwa.

CANbus Connector

Ƙididdiga na Fasaha

Tushen wutan lantarki
Shigar da kunditage	12 ko 24VDC
Kewayon halatta	10.2-28.8VDC
Max. amfani na yanzu	840mA @ 12V 420mA @ 24V
Baturi
Ajiyayyen	Shekaru 7 na yau da kullun a 25°C, ajiyar baturi don RTC da bayanan tsarin, gami da bayanan canji.
Mai maye gurbin	Ee, ba tare da buɗe mai sarrafawa ba.
Allon Nuni Zane	Duba Bayani 1
Nau'in LCD	TFT
Hasken baya	Farin LED
Nuni ƙuduri, pixels	800×600 (SVGA)
Viewyanki	10.4"
Launuka	65,536 (16-bit)
Kariyar tabawa	Resistive, analog
'Taba' nuni	Ta hanyar buzzer
Hasken allo	Ta hanyar software (Kimanin Store zuwa SI 9).
faifan maɓalli	Yana nuna madanni na kama-da-wane lokacin da aikace-aikacen ke buƙatar shigarwar bayanai.
Bayanan kula:
1. Lura cewa allon LCD yana iya samun pixel guda ɗaya wanda ke dindindin ko dai baki ko fari.

faifan maɓalli
Adadin maɓallai: 9 maɓallan ayyuka masu shirye-shirye
Nau'in Key: Ƙarfe dome, rufe murfin membrane

Shirin
Girman ƙwaƙwalwar ajiya: Dabarun Aikace-aikacen - 2MB, Hotuna - 80MB, Fonts - 1MB

Nau'in Operand	Yawan	Alama	Daraja
Ƙwaƙwalwar ajiya	8192	MB	Bit (naɗa)
Ƙwaƙwalwar ƙwaƙwalwa	4096	MI	16-bit
Dogayen Integers	512	ML	32-bit
Kalma Biyu	256	DW	32-bit ba a sanya hannu ba
Ƙwaƙwalwar Ƙwaƙwalwa	64	MF	32-bit
Masu ƙidayar lokaci	384	T	32-bit
Ma'auni	32	C	16-bit

Teburin Bayanai: 120K tsayayyen bayanan RAM ( sigogin girke-girke, bayanan bayanai, da sauransu) Up tp 256K bayanan Flash
HMI nuni: Har zuwa 1024
Lokacin duba shirin: 9 μsec a cikin 1K na aikace-aikacen yau da kullun

Memory mai cirewa
Katin Micro-SD	Mai jituwa tare da katunan micro-SD masu sauri; adana bayanai, Ƙararrawa, Trends, Data Tables, madadin Tsani, HMI, da OS. Duba bayanin kula 2
Bayanan kula:
2. Dole ne mai amfani ya tsara ta hanyar amfani da kayan aikin Unitronics SD.

Sadarwa

Serial tashoshin jiragen ruwa	2. Duba bayanin kula 3
Saukewa: RS232
Galvanic kadaici	Ee
Voltage iyaka	± 20VDC cikakken iyakar
Rage darajar Baud	300 zuwa 115200 bps
Tsawon igiya	Har zuwa 15m (50')
Saukewa: RS485
Galvanic kadaici	Ee
Voltage iyaka	-7 zuwa +12VDC matsakaicin bambanci
Rage darajar Baud	300 zuwa 115200 bps
Nodes	Har zuwa 32
Nau'in kebul	Garkuwar murɗaɗɗen biyu, daidai da EIA RS485
Tsawon igiya	Matsakaicin 1200m (4000')
USB	Duba Bayani 4
Nau'in tashar jiragen ruwa	Mini-B
Galvanic kadaici	A'a
Ƙayyadaddun bayanai	USB 2.0 mai jituwa; cikakken gudun
Rage darajar Baud	300 zuwa 115200 bps
Kebul	USB 2.0 mai jituwa; zuwa 3m
CANbus tashar jiragen ruwa	1
Nodes	CAN Buɗe	Ka'idojin CANbus na Unitronics
	127	60
Bukatun wutar lantarki	24VDC (± 4%), 40mA max. kowace raka'a. Duba bayanin kula 5
Galvanic kadaici	Ee, tsakanin CANbus da mai sarrafawa
Tsawon kebul / ƙimar baud Dubi bayanin kula 5	25 m 100 m 250 m 500 m 500 m 1000m* 1000m*	1 Mbit/s 500 kbps 250 kbps 125 kbps 100 kbps 50 kbps 20 kbps
			* Idan kuna buƙatar tsayin kebul sama da mita 500, tuntuɓi tallafin fasaha.
Tashar tashar zaɓi	Mai amfani na iya shigar da tashar Ethernet guda ɗaya, ko tashar RS232/RS485. Akwai ta oda daban.
Bayanan kula:
3. An saita ma'auni na kowane tashar jiragen ruwa zuwa ko dai RS232/RS485 bisa ga saitunan sauya DIP. Koma zuwa Jagoran Shigarwa. 4. Ana iya amfani da tashar USB don shirye-shirye, zazzagewar OS, da samun damar PC. Lura cewa an dakatar da aikin COM tashar jiragen ruwa 1 lokacin da aka haɗa wannan tashar ta jiki zuwa PC. 5. Yana goyan bayan duka 12 da 24VDC CANbus wutar lantarki, (± 4%), 40mA matsakaicin kowace naúrar. Lura cewa idan aka yi amfani da 12 VDC, matsakaicin tsayin kebul ɗin shine mita 150.

Ni / Os
	Adadin I/Os da nau'ikan sun bambanta bisa ga tsarin. Yana goyan bayan har zuwa 1024 dijital, babban sauri, da I/Os na analog.
Snap-in I/O modules	Toshe cikin tashar jiragen ruwa na baya don ƙirƙirar PLC mai ƙunshe da har zuwa 62 I/Os.
Abubuwan haɓakawa	Adaftar gida (PN EX-A1), ta hanyar I/O Expansion Port. Haɗa har zuwa 8 I/O Expansion Modules wanda ya ƙunshi ƙarin ƙarin I/O 128. Adafta mai nisa (PN EX-RC1), ta tashar CANbus. Haɗa har zuwa adaftan 60; haɗa har zuwa 8 I/O fadada kayayyaki zuwa kowane adaftan.
Exp. keɓewar tashar jiragen ruwa	Galvanic
Girma
Girman	289X244.5X59.1mm )11.37"X9.62"X2.32" Duba bayanin kula 6
Nauyi	1.5kg (52.9 oz)
Bayanan kula:
6. Don ainihin ma'auni, koma zuwa Jagorar Shigarwa na samfur.

Yin hawa
Panel-hawan	Ta maƙarƙashiya

Muhalli
Cikin majalisar ministoci	IP20 / NEMA1 (harka)
An saka panel	IP65 / NEMA4X (fashin gaba)
Yanayin aiki	0 zuwa 50ºC (32 zuwa 122ºF)
Yanayin ajiya	-20 zuwa 60ºC (-4 zuwa 140ºF)
Dangantakar Humidity (RH)	5% zuwa 95% (ba mai tauri)

Takardu / Albarkatu

UNITRONICS V1040-T20B Vision OPLC Masu Gudanar da Dabarun Shirye-shiryen [pdf] Jagoran Shigarwa V1040-T20B.

Magana

• Manual mai amfani