solis Litlhophiso tsa Limit tsa kantle ho naha U sebelisa CT Clamp
HLOKOMELA: Sehlopha sa CTamp e lokela ho kenngoa holim'a boto e kholo ka motsu ho CT o shebaneng le marang-rang. Mohala oa CT HA oa lokela ho tsamaisoa ka thapo ea AC, o ka baka tšitiso
HO HLOMELA LIMIT EA HO SEBELISA CT CLAMP
MOHATO 1: Tobetsa Enter skrineng sa inverter.
MOHATO 2: Sebelisa linotlolo tsa Up/Down ho ea litlhophisong tse tsoetseng pele ebe o tobetsa Enter.
MOHATO 3: Tobetsa konopo ea Down habeli le konopo ea holimo hang, ho ngola phasewete e le 0010. Ebe o tobetsa Enter.
MOHATO 4: Sebelisa linotlolo tsa holimo/tlase ho tsamaisetsa ho Grid ON/ Grid OFF. Ebe o tobetsa Enter
MOHATO 5: Khetha khetho ea Grid OFF ebe o tobetsa Enter. U tla bona lebone la ts'ebetso le tima.
MOHATO 6: Sebelisa konopo ea Up/Down ho tsamaisetsa ho litlhophiso tsa EPM/ EPM ea ka hare/ Export Power Set, ho sa tsotellehe hore na e fumaneha skrineng sa hau. Ebe o tobetsa Enter.
MOHATO 7: Eya ho Backflow Power ebe o tobetsa Enter.
MOHATO 8: Sebelisa linotlolo tsa Up / Down ho beha matla a Backflow ho latela litlhoko tsa hau. Bakeng sa ExampLe: Haeba moeli oa hau oa ho romella kantle e le 5kW o hloka ho beha matla a Backflow joalo ka 5000W kapa +5000W. Tobetsa Enter.
MOHATO 9: Sebelisa linotlolo tsa Up/Down ho fumana Mode Khetha. Sebelisa linotlolo tsa Up/Down ho fumana 'Current Sensor'. Tobetsa Enter, ho netefatsa khetho e khethiloeng. Ebe o tobetsa "ESC" ho khutlela morao.
MOHATO 10: Joale bulela Grid ho Litlhophiso tse Tsoetseng Pele.
(E-ea ho Litlhophiso tse Tsoetseng Pele ka ho tobetsa ESC hararo < Seta phasewete 0010 < Eya ho Grid ON/Gridi E TLOHILE < Kgetha Grid ON < Tobetsa Kena).
MOHATO 11: Kamora hore khetho ea Grid e BULE, kena ho li-setting tsa EPM/ Internal EPM/ Export Power Set ebe o tobetsa Enter. Khetha Mokhoa Khetha → Sensor ea Hona joale→ U tla fumana likhetho tse peli ha u khetha Sensor ea Hona joale.
- Tobetsa CT Link Test ebe o tobetsa Enter. U tla bona boemo e le 'Nepahetse' - ho bolelang hore tsohle li sebetsa hantle. Haeba ho se joalo, u tla bona 'Phoso' skrineng haeba khokahano e sa nepahala. Kapa u tla bona 'NG' skrineng haeba CT e kentsoe ka tsela e fosahetseng.
- CT sampkaro-karolelano
Haeba o hloka ho fetola karolelano ea CT, Khetha CT sample karo-karolelano 'me u e behe ho latela litlhoko tsa hau (kamehla ke 3000: 1)
MOHATO 12: Tobetsa ESC ho tsoa skrineng se seholo. Boemo bo hlahang e tla ba LYMBYEPM, e leng se bontšang hore u atlehile ho beha moeli oa ho romela thepa ntle.
'HOHLE HO ETSE E-BA LE LETSATSI LE MOLEMO!
W: www.solisinverters.com.au
Ph: 03 8555 9516
E: service@ginlongaust.com.au
Litokomane / Lisebelisoa
 |
solis Litlhophiso tsa Limit tsa kantle ho naha U sebelisa CT Clamp [pdf] Litaelo Litlhophiso tsa Limit tsa kantle ho naha, U sebelisa CT Clamp, Litlhophiso tsa Limit tsa kantle ho naha tse sebelisang CT Clamp |
