Owner's Manual for SKYDANCE models including: DS DMX512-SPI, Decoder and RF Controller, DS DMX512-SPI Decoder and RF Controller, RF Controller, Controller
DMX512 to SPI decoder and RF controller with digital display. Compatible with 42 kinds digital IC RGB or RGBW LED strip, IC type and R/G/B order can be set.
DMX512 to SPI decoder and RF controller with digital display. Compatible with 45 kinds of digital IC RGB or RGBW LED strips, IC type and R/G/B order can be set.
DMX512-SPI Decoder and RF Controller Model No.: DS
Compatible with 34 kinds IC/Numeric display/Stand-alone function/Wireless remote control/Din rail
Features
DMX512 to SPI decoder and RF controller with digital display. Compatible with 34 kinds digital IC RGB or RGBW LED strip,
IC type and R/G/B order can be set. Compatible ICs: TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, UCS2903, UCS2909, UCS2912, WS2811, WS2812, TM1829, TLS3001, TLS3002, GW6205, MBI6120, TM1814B, SK6812, UCS8904B, LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, WS2801, WS2803, P9813, SK9822, TM1914A,GS8206,GS8208. DMX decode mode, stand-alone mode and RF mode selectable. Standard DMX512 compliant interface, set DMX decode start address by buttons. Under stand-alone mode, change mode, speed or brightness by bottons. Under RF mode, match with RF 2.4G RGB/RGBW remote control. 32 kinds dynamic mode, include horse-race, chase, flow, trail or gradual change style.
Technical Parameters
LVD
Input and Output Input voltage Power consumption Input signal Output signal Dynamic mode Control dots
Safety and EMC
EMC standard (EMC)
Safety standard(LVD) Certification
5-24VDC 1W DMX512 + RF 2.4GHz SPI(TTL) 32 170 pixels (RGB 510 CH) Max 900 pixels
EN55032:2015, EN61000-3-2:2014, EN61000-3-2:2013, EN55024 :2010/A1:2015
EN 61347-1:2015 EN 61347-2-11:2015 CE,EMC,LVD
Environment Operation temperature Case temperature (Max.) IP rating
Ta: -30 OC ~ +55 OC T c:+65OC IP20
Warranty and Protection Warranty Protection
5 years Reverse Polarity
Weight Net weight Gross weight
0.098kg 0.129kg
User Manual Ver 1.0.9
Mechanical Structures and Installations
DS DMX512-SPI Decoder and RF Controller
GND
Installation rack
DMX input -
DMX input +
M
Power input + Power input -
Wiring Diagram
DMX output +
DMX output -
GND Digital display
Setting key
GND DATA signal output
V+ CLK signal output
45mm 35.5mm
67mm
37mm 48mm
DIN Rail Mounting Size: TS-35/7.5 or TS-35/15
DMX Master
M
AC100-240V
Power Supply 5-24VDC Constant Voltage
V+
DA RGB LED pixel strip
V-
Note: If the SPI LED pixel strip is single-wire control, the DATA and CLK output is same, we can connect up to 2 LED strips.
Page 1
Operation
IC type, RGB order and pixel length length setting
You must first assure IC type, RGB order and pixel length of the LED strip is correct. Long press M and key, prepare for setup IC type, RGB order, pixel length, automatic blank screen,
Short press M key to switch four item. Press or key to setup value of each item. Long press M key for 2s, or timeout 10s, quit setting.
IC type
RGB order
pixel length disable automatic blank screen
IC type table: No.
IC type
Output signal
C11
C12
C13 C14 C15 C16 C17
C18 C19
C21 C22 C23 C24 C25 C31 C32
TM1803 TM1809,TM1804,TM1812,UCS1903,UCS1909,UCS1912, UCS2903,UCS2909,UCS2912,WS2811,WS2812 TM1829 TLS3001,TLS3002 GW6205 MBI6120 TM1814B(RGBW) SK6812(RGBW) UCS8904B(RGBW) LPD6803,LPD1101,D705,UCS6909,UCS6912 LPD8803,LPD8806 WS2801,WS2803 P9813 SK9822 TM1914A GS8206,GS8208
DATA
DATA DATA DATA DATA DATA DATA DATA DATA DATA,CLK DATA,CLK DATA,CLK DATA,CLK DATA,CLK DATA DATA
RGB order: O-1 - O-6 indicate six order (RGB, RBG, GRB, GBR, BRG, BGR). Pixel length: Range is 008-900. Automatic blank screen: enable ("bon") or disable("boF") automatic blank screen.
DMX decode mode
Short press M key, when display 001-999, enter DMX decode mode. Press or key to change DMX decode start address(001-999),
long press for fast adjustment. Long press M key for 2s, prepare for setup decode number and multiple of pixels. DMX decode mode
Short press M key to switch two item. Press or key to setup value of each item. Decode number(display "dno") : DMX decode channel number, range is 003-600(for RGB). Multiple of pixels(display "Pno") : Each 3 DMX channel control length(for RGB), range is 001- pixel length. Long press M key for 2s, or timeout 10s, quit setting. If there is a DMX signal input, will enter DMX decode mode automatically.
For example, the DMX-SPI decoder connect with RGB strip:
DMX data from DMX512 console:
DMX CH 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 DMX Data 255 0 0 0 255 0 0 0 255 255 255 0 0 255 255 255 0 255
User Manual Ver 1.0.9
DS DMX512-SPI Decoder and RF Controller
DMX-SPI decoder output (start address: 001, decode channel number: 18, each 3 channel control length: 1):
V+ DA V-
DMX-SPI decoder output (start address: 001, decode channel number: 18, each 3 channel control length: 3):
V+ DA V-
Stand-alone mode
Short press M key, when display P01-P32, enter stand-alone mode. Press or key to change dynamic mode number(P01-P32). Each mode can adjust speed and brightness.
Long press M key for 2s, prepare for setup mode speed and brightness. Short press M key to switch two item. Press or key to setup value of each item. Mode speed: 1-10 level speed(S-1, S-9, S-F). Mode brightness: 1-10 level brightness(b-1, b-9, b-F). Long press M key for 2s, or timeout 10s, quit setting. Enter stand-alone mode only when DMX signal is disconnected or lost.
Stand-alone mode
Speed
Brightness
(8 level) (10 level,100)
Dynamic mode list
No.
Name
No.
P01 Red horse race white ground
P12
P02 Green horse race white ground
P13
P03 Blue horse race white ground
P14
P04 Yellow horse race blue ground
P15
P05 Cyan horse race blue ground
P16
P06 Purple horse race blue ground
P17
P07 7 color multi horse race
P18
P08 7 color horse race close + open
P19
P09 7 color multi horse race close + open P20
P10 7 color scan close + open
P21
P11 7 color multi-scan close + open
P22
Name Blue White chase Green Cyan chase RGB chase 7 color chase Blue meteor Purple meteor White meteor 7 color meteor Red float Green float Blue float
No. P23 P24 P25 P26 P27 P28 P29 P30 P31 P32
Name Purple float RGBW float Red Yellow float Green Cyan float Blue Purple float Blue White float 6 color float 6 color smooth sectionally 7 color jump sectionally 7 color strobe sectionally
RF mode
Match: Long press M and key for 2s, display "RLS", within 5s, press on/off key of the RGB remote, display "RLO", match is successful, then use the RF remote to change mode number, adjust speed or brightness.
Delete: Long press M and key for 5s, until display "RLE", delete all matched RF remote.
Restore factory default parameter Long press and key, restore factory default parameter, display"RES". Factory default parameter: DMX decode mode, DMX decode start address is 1, decode number is 510,
multiple of pixels 1, dynamic mode number is 1, chip type is TM1809, RGB order, pixel length is 170, disable automatic blank screen, without matched RF remote.
Page 2
Corel PDF Engine Version 16.1.0.843 CorelDRAW X6