DMX512-SPI Decoder le RF Controller
Bukana ea Mosebelisi
DMX512-SPI Decoder le RF Controller
Nomoro ea mohlala: DS
E lumellana le mefuta e 45 ea lichipisi / Pontšo ea dijithale / Ts'ebetso e ikemetseng / Taolo e hole e se nang mohala / Seporo sa Din 
Likaroloana
- DMX512 ho SPI decoder le RF controller e nang le ponts'o ea dijithale.
- E lumellana le mefuta e 45 ea li-strip tsa LED tsa IC RGB kapa RGBW,
Mofuta oa IC le odara ea R/G/B e ka hlophisoa.
Compatible chips: TM1803，TM1804，TM1809，TM1812，UCS1903，UCS1909，UCS1912，SK6813，UCS2903，UCS2909，UCS2912，WS2811，WS2812，WS2813，WS2815，TM1829，TLS3001，TLS3002，GW6205，MBI6120，TM1814B(RGBW)，SK6812(RGBW)，WS2813(RGBW)，WS2814(RGBW)，UCS8904B(RGBW)，SM16714(RGBW)，LPD6803，LPD1101，D705，UCS6909，UCS6912，LPD8803，LPD8806，WS2801，WS2803，P9813，SK9822，TM1914A，GS8206，GS8208，UCS2904，SM16804，SM16825，UCS2603，UCS5603. - Mokhoa oa ho khetha oa DMX, mokhoa oa ho ema o le mong le mokhoa oa RF o ka khethoang.
- Sebopeho se lumellanang le DMX512 se tloaelehileng, seta aterese ea ho qala ea DMX ka likonopo.
- Tlas'a mokhoa o ikemetseng, fetola mokhoa, lebelo kapa khanya ka libotlolo.
- Tlas'a RF mode, bapisa le RF 2.4G RGB/RGBW remote control.
- Mefuta e 32 e matla, e kenyelletsa lebelo la lipere, ho lelekisa, ho phalla, tsela kapa mokhoa oa ho fetoha butle butle.
Tekheniki Parameters
| Kenyeletso le Sephetho | |
| Keletso voltage | 5-24VDC |
| Tšebeliso ea matla | 1W |
| Lets'oao la ho kenya | DMX512 + RF 2.4GHz |
| Letshwao la tlhahiso | SPI(TTL) |
| Nomoro ea Dynamic mode | 32 |
| Laola matheba | 170 pixels (RGB 510 CH) Boholo ba lipikselse tse 900 |
| Tšireletseho le EMC | |
| EMC e tloaelehileng (EMC) | ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 |
| Tekanyetso ea polokeho(LVD) | EN 62368-1:2020+A11:2020 |
| Setifikeiti | CE,EMC,LVD,RED |
| Tikoloho | |
| Mocheso oa ts'ebetso | Matla: -30ºC ~ +55ºC |
| Thempereichara ea boholo (Boholo.) | T c: +65ºC |
| Lintlha tsa IP | IP20 |
Tiisetso le Tshireletso
| Tiisetso | 5 lilemo |
| Tshireletso | Khutlela Polarity |
Boima ba 'mele
| Boima bo felletseng | 0.098kg |
| Boima bo kahare | 0.129kg |
Mechanical Structures le Installations
Setšoantšo sa Wiring
Hlokomela:
● Haeba mohala oa pixel oa SPI LED e le taolo ea terata e le 'ngoe, tlhahiso ea DATA le CLK e tšoana, re ka hokahanya ho fihla ho lihlopha tse 2 tsa LED.
Tshebetso
Mofuta oa IC, odara ea RGB le litlhophiso tsa bolelele ba pixel
- O tlameha ho qala ka ho netefatsa mofuta oa IC, odara ea RGB le bolelele ba pixel ba lesela la LED li nepahetse.
- Tobetsa nako e telele M le ◀ konopo, lokisetsa mofuta oa IC oa ho seta, tatellano ea RGB, bolelele ba pixel, skrine e se nang letho, tobetsa M hakhutšoanyane ho fetola ntho e mene.
Tobetsa ◀ kapa ▶ konopo ho beha boleng ba ntho ka 'ngoe.
Tobetsa nako e telele konopo ea M bakeng sa 2s, kapa timeout 10s, khaotsa ho seta.
- Tafole ea mofuta oa IC:
Che. Mofuta oa IC Letshwao la tlhahiso C11 TM1803 DATA C12 TM1809,TM1804,TM1812,UCS1903,UCS1909,UCS1912,SK6813
UCS2903,UCS2909,UCS2912,WS2811,WS2812,WS2813,WS2815DATA C13 TM1829 DATA C14 TLS3001,TLS3002 DATA C15 Gw6205 DATA C16 MBI6120 DATA C17 TM1814B(RGBW) DATA C18 SK6812(RGBW),WS2813(RGBW),WS2814(RGBW) DATA C19 UCS8904B(RGBW) DATA C21 LPD6803,LPD1101,D705,UCS6909,UCS6912 DATA, CLK C22 LPD8803,LPD8806 DATA, CLK C23 WS2801,WS2803 DATA, CLK C24 P9813 DATA, CLK C25 SK9822 DATA, CLK C31 TM1914A DATA C32 GS8206,GS8208 DATA C33 UCS2904 DATA C34 SM16804 DATA C35 SM16825 DATA C36 SM16714(RGBW) DATA C37 UCS5603 DATA C38 UCS2603 DATA - Taelo ea RGB: O-1 - O-6 e bontša taelo e tšeletseng (RGB, RBG, GRB, GBR, BRG, BGR).
- Bolelele ba pixel: Range ke 008-900.
- Skrine se se nang letho se iketselitseng: nolofalletsa ("bon") kapa tima ("boF") skrineng se se nang letho.
Mokhoa oa ho khetha DMX
Ho na le mefuta e 'meli ea DMX decode e ka khethoang.
DMX decode mode1: fetola mmala o bobebe ka ho beha aterese ea DMX decode;
DMX decode mod 2: chencha mekhoa e matla ea khanya, laola ho khanya le lebelo la mokhoa o matla ka liaterese tse 3 tse fapaneng tsa DMX.
Tobetsa nako e telele M, ◀ le ▶ konopo ka nako e le 'ngoe ho fetola mokhoa oa ho khetha DMX (display”d-1″ ) le mokhoa oa ho khetholla oa DMX (display”d-2″ ).
Tobetsa nako e telele konopo ea M bakeng sa 2s, ebe u khutlela ho sebopeho sa aterese ea DMX.
- mokhoa 1:
- Tobetsa ka nako e khuts'oane konopo ea M, ha o bonts'a 001-512, kenya mokhoa oa DMX decode.
- Tobetsa ◀ kapa ▶ konopo ho fetola aterese ea ho qala ea DMX decode(001-512), tobetsa nako e telele ho lokisa kapele.
- Tobetsa nako e telele konopo ea M bakeng sa 2s, lokisetsa nomoro ea ho seta le lipikselse tse ngata.
Tobetsa konopo ea M ho fetola lintho tse peli.
Tobetsa ◀ kapa ▶ konopo ho beha boleng ba ntho ka 'ngoe.
Nomoro ea ho khetha (bontša "dno"): Nomoro ea mocha oa DMX, sebaka ke 003-600 (bakeng sa RGB).
Lipikselse tse ngata (pontšo "Pno"): Bolelele bo bong le bo bong ba taolo ea 3 DMX (bakeng sa RGB), bolelele ke 001- pixel bolelele.
Tobetsa nako e telele konopo ea M bakeng sa 2s, kapa timeout 10s, khaotsa ho seta. - Haeba ho na le lets'oao la lets'oao la DMX, le tla kenya mokhoa oa ho khetholla DMX ka bohona.
Bakeng sa mohlalaample, decoder ea DMX-SPI e hokahana le strip ea RGB:
Lintlha tsa DMX ho tsoa ho khomphutha ea DMX512:
DMX-SPI decoder e hlahisoang (aterese ea ho qala: 001, decode nomoro ea mocha: 18, bolelele bo bong le bo bong ba taolo ea 3: 1):
DMX-SPI decoder e hlahisoang (aterese ea ho qala: 001, decode nomoro ea mocha: 18, bolelele bo bong le bo bong ba taolo ea 3: 3):
- mokhoa 2:
- Tobetsa ka nako e khutšoanyane konopo ea M, ha o bonts'a 001-512, Tobetsa ◀ kapa ▶ konopo ho fetola aterese ea ho qala ea DMX decode (001-512), tobetsa nako e telele bakeng sa ho lokisa kapele.
Bakeng sa mohlalaample, ha aterese ea ho qala ea DMX e behiloe ho 001. Aterese ea 1 ea DMX console ke bakeng sa maemo a matla a mofuta oa leseli (32 modes), aterese ea 2 ke ea ho beha khanya (maemo a 10), aterese ea 3 ke ea ho beha lebelo (maemo a 10) .
Tobetsa nako e telele konopo ea M bakeng sa 2s, kapa timeout 10s, khaotsa ho seta. - Aterese ea 1 ea console ea DMX: mokhoa o khanyang oa khanya
1: 0-8
2: 9-16
3: 17-24
4: 25-32
5: 33-40
6: 41-48
7: 49-56
8: 57-649: 65-72
10: 73-80
11: 81-88
12: 89-96
13: 97-104
14: 105-112
15: 113-120
16: 121-12817: 129-136
18: 137-144
19: 145-152
20: 153-160
21: 161-168
22: 169-176
23: 177-184
24: 185-19225: 193-200
26: 201-208
27: 209-216
28: 217-224
29: 225-232
30: 233-240
31: 241-248
32: 249-255 - Aterese ea 2 ea console ea DMX : Ho khanya (ha aterese ea 2<5, tima lebone)
1: 5-25 (10%)
2: 26-50 (20%)
3: 51-75(30%)
4: 76-100(40%)
5: 101-125(50%)6: 126-150(60%)
7: 151-175(70%)
8: 176-200(80%)
9: 201-225(90%)
10: 226-255(100%) - Aterese ea 3 ea console ea DMX : Lebelo
1: 0-25(10%)
2: 26-50(20%)
3: 51-75(30%)
4: 76-100(40%)
5: 101-125(50%)6: 126-150(60%)
7: 151-175(70%)
8: 176-200(80%)
9: 201-225(90%)
10: 226-255(100%)
Mokhoa o ikemetseng
- Tobetsa hakhutšoanyane M konopo, ha o bonts'a P01-P32, kenya mokhoa o ikemetseng.
- Tobetsa ◀ kapa ▶ konopo ho fetola dynamic mode number(P01-P32).
- Mokhoa o mong le o mong o ka fetola lebelo le khanya.
Tobetsa nako e telele senotlolo sa M bakeng sa 2s, lokisetsa lebelo la mokhoa oa ho seta le ho khanya.
Tobetsa konopo ea M ho fetola lintho tse peli.
Tobetsa ◀ kapa ▶ konopo ho beha boleng ba ntho ka 'ngoe.
Lebelo la mokhoa: lebelo la boemo ba 1-10 (S-1, S-9, SF).
Khanya ea mokhoa: khanya ea boemo ba 1-10(b-1, b-9, bF).
Tobetsa nako e telele konopo ea M bakeng sa 2s, kapa timeout 10s, khaotsa ho seta. - Kenya mokhoa oa ho ema o le mong ha feela lets'oao la DMX le khaotsoe kapa le lahlehile.
Lenane la mekhoa e matla
| Che. | Lebitso | Che. | Lebitso | Che. | Lebitso |
| P01 | Peiso ea pere e khubelu mobu o mosoeu | P12 | Lelekisa Blue White | P23 | Phalasa e pherese |
| P02 | Peiso ea pere e tala mobu o mosoeu | P13 | Green Cyan lelekisa | P24 | RGBW e phaphametse |
| P03 | Peiso e putsoa mobung o mosoeu | P14 | RGB e lelekisa | P25 | Sefate se Sefubelu se Sehla |
| PO4 | Lebelo la pere e tshehla mobu o putswa | P15 | 7 ho lelekisa mebala | P26 | Ho phaphamala ha Cyan e tala |
| P05 | Lebelo la lipere tsa Cyan fatše | P16 | Meteor e putsoa | P27 | Sekepe sa Blue Purple |
| P06 | Peiso ea pere e pherese fatše | P17 | Meteor e pherese | P28 | Sekepe sa Blue White float |
| P07 | Mebala e 7 ea lebelo la lipere tse ngata | P18 | Meteor e tšoeu | P29 | 6 mebala phaphamala |
| P08 | 7 peiso ea lipere tsa mebala e koala + butle | P19 | 7 mebala ea meteor | P30 | 6 mebala e boreleli karolong e itseng |
| P09 | Mebala e 7 ea lebelo la lipere tse ngata haufi + le | P20 | Phalla e khubelu | P31 | 7 tlola ka mebala ka karolo |
| P10 | 7 ea ho hlahloba mebala e koala + butle | P21 | Phaphatse e tala | P32 | 7 color strobe sectionally |
| P11 | 7 mebala e mengata ea ho skena e koala + butle | P22 | Phaphatse e putsoa |
Khutlisa paramethara ea kamehla ea feme
- Tobetsa nako e telele ◀ le konopo ea ▶, khutlisetsa parameter ea kamehla ea feme, bonts'a"RES".
- Factory default parameter: DMX decode mode 1, DMX decode start address ke 1, decode number ke 510, multiple of pixels 1, dynamic mode number ke 1, mofuta oa chip ke TM1809, odara ea RGB, bolelele ba pixel ke 170, tima skrine e se nang letho e ikemetseng, ntle le ho tsamaisana le RF remoutu.
Mokhoa oa RF
Match: Tobetsa nako e telele M le ▶ key bakeng sa 2s, hlahisa "RLS", ka hare ho 5s, tobetsa konopo ea on/off ea remote ea RGB, bonts'a "RLO", papali e atlehile, ebe sebelisa RF remote ho fetola nomoro ea mode, fetola lebelo. kapa kganya.
Hlakola: Tobetsa nako e telele M le ▶ konopo bakeng sa 5s, ho fihlela ho bonts'a "RLE", hlakola li-remote tsohle tsa RF tse tsamaellanang.
Litokomane / Lisebelisoa
 |
SKYDANCE DMX512-SPI Decoder le RF Controller [pdf] Bukana ea Mosebelisi DMX512-SPI, Decoder le RF Controller, DMX512-SPI Decoder le RF Controller, RF Controller, Controller |
