TŠOANTŠO E HLARELETSENG®

HOBOBOLE LEBAKA
Ntho ea No. 207208

Kea le leboha ka ho reka Sharper Image Hoverboard. Ka kopo bala tataiso ena 'me u e boloke bakeng sa ts'ebeliso ea nako e tlang.

HO ETSA HORE HO LENG LENANE HO BOLELA'NG?
Lenane la UL le bolela hore UL (Underwriters Laboratories) e lekile baemeli samples ea sehlahisoa mme a ikemisetsa hore e fihlela litlhoko tsa bona. Litlhokahalo tsena li ipapisitse haholo le Litekanyetso tsa UL tse phatlalalitsoeng le tse amoheloang ke naha ka bophara tsa polokeho.

HO BUA KA EN 2272 ho netefalitsoe?
UL e ts'ehetsa barekisi le baetsi ka ho fana ka liteko tsa motlakase le polokeho ea mollo tlasa UL 2272, Sisteme ea Motlakase bakeng sa Bakhanni ba Iketsetsang. Tekanyetso ena e lekola ts'ireletseho ea sistimi ea motlakase oa terene ea motlakase le sistimi ea betri le tjhaja empa HA E lekole ts'ebetsong, ts'epahalo, kapa polokeho ea mopalami.

LIEKETSENG
Hoverboard ke koloi ea motho ka mong e lekiloeng bakeng sa polokeho. Leha ho le joalo, ho sebetsa ka koloi ena ho na le likotsi tse itseng tsa tlhaho, ho kenyeletsoa kotsi le / kapa tšenyo ea thepa. Ka kopo apara liaparo tse loketseng tsa polokeho ka linako tsohle ha u ntse u sebelisa Hoverboard ea hau 'me u netefatse hore u bala se ka hare ho bukana ena pele e sebetsoa ho fokotsa likotsi.

TEMOSO!
• E le ho qoba likotsi tse bakoang ke ho thulana, ho oa, le / kapa tahlehelo ea taolo, ka kopo ithute ho palama Hoverboard ea hau kantle ka polokeho kantle tikolohong e bataletseng, e bulehileng
• Bukana ena e kenyeletsa litaelo tsohle tsa tšebetso le mehato ea ho itšireletsa. Basebelisi bohle ba tlameha ho bala buka ena ka hloko ebe ba latela litaelo. Ka kopo roala lisebelisoa tsohle tse loketseng tsa polokeho, ho kenyeletsoa helmete e netefalitsoeng ke CPSC (Consumer Product Safety Commission). Ka kopo latela melao eohle ea lehae mabapi le ts'ebeliso libakeng tsa sechaba le litseleng.

TLHALOSO MAKOLOANE
1. Bonneteng
2. Mats
3. Boto ea Pontšo
4. Tyre le Motor
5. Leseli la LED
6. Ts'ireletso ea Motho ka Mong

HO SEBELISA HOBOBOBO EA HAO
Hoverboard e sebelisa li-gyroscopes le sensors ea matsapa ho laola botsitso ka bohlale ho latela setsi sa hau sa khoheli. Hoverboard e boetse e sebelisa sistimi ea taolo ea servo ho khanna enjene. E ikamahanya le 'mele oa motho, kahoo ha u eme ho Hoverboard, its'etlehe' mele oa hau pele kapa morao. Semela sa motlakase se tla laola mabili ka motsamao oa pele kapa oa morao ho o boloka o tsitsitse.
Ho reteleha, butle butle butle 'me u itšetlehe ka' mele oa hau ho le letšehali kapa ka ho le letona. Sisteme ea botsitso e hahelletsoeng kahare e tla boloka tataiso pele kapa morao. Leha ho le joalo, e ke ke ea tiisa botsitso ha e ntse e tjekela ka ho le letšehali kapa ka ho le letona. Ha u ntse u khanna Hoverboard, ka kopo fetisetsa boima ba hau molemong oa ho hlola matla a centrifugal le ho ntlafatsa polokeho ea hau ha u ntse u tjeka.

MAT MATSOSO
Ho na le li-sensor tse 'ne tlasa meseme. Ha mosebelisi a hata limmete, Hoverboard e tla iketsa ka botsona mokhoa oa ho itšepa.
A. Ha u ntse u khanna Hoverboard, u tlameha ho etsa bonnete ba hore u hata meseme ea maoto ka ho lekana. O SE KE WA TSAMAYA LEBAKA LE LENGWE HO FETA MAT.
B. Ke kopa o seke oa beha lintho meseme. Sena se tla etsa hore switch ea Hoverboard e bulehe, e ka bang kotsi ho batho, kapa ea senya yuniti.

BONTS'A LEBITO
Boto ea Pontšo e bohareng ba Hoverboard. E bonts'a leseli la hajoale la sesebelisoa.

PONTS'A BATLE
A. Lebone le tiileng la LED e Bontšang hore Hoverboard e lefisitsoe ka botlalo ebile e ikemiselitse ho sebelisoa. Leseli la LED la ORANGE le bontša hore betri e tlase 'me e hloka ho nchafatsoa. Ha lebone la LED le fetoha Bokhubelu, betri e felile 'me e hloka ho tjhaja hanghang.
B. Ho matha LED: Ha opareitara e baka li-sensors tsa mat, LED e mathang e tla bonesa. TSOHLE e bolela hore sistimi e kene maemong a ts'ebetso. Ha sistimi e na le phoso nakong ea ts'ebetso, lebone la LED le sebetsang le tla fetoha RED.

POLOKO
Re tšepa mong le e mong mosebedisi ka khanna Hoverboard bona sireletsehileng.
Haeba u hopola u ithuta ho palama baesekele, kapa u ithuta ho thellisa kapa lehare la roller, maikutlo a tšoanang a sebetsa koloing ena.

1. Ka kopo latela litaelo tsa polokeho bukaneng ena. Re khothaletsa ka tieo hore u bale buka ka hloko pele u sebelisa Hoverboard ea hau ka lekhetlo la pele. Lekola tšenyo ea mabili, likarolo tse hlephileng, jj pele u khanna. Haeba ho na le maemo a sa tloaelehang, ka kopo ikopanye le lefapha la Ts'ebeletso ea Bareki hanghang.
2. Se ke oa sebelisa Hoverboard ka mokhoa o fosahetseng, kaha sena se ka beha polokeho ea batho kapa thepa kotsing.
3. Se ke oa bula kapa oa fetola likarolo tsa Hoverboard, hobane sena se ka baka kotsi e mpe. Ha ho na likarolo tse sebelisoang ke mosebelisi ho Hoverboard.

WEIGHT LIMIT
Lintlha tse peli tse latelang ke lebaka leo re behileng moeli oa boima ba Hoverboard:
1. Ho netefatsa polokeho ea mosebelisi.
2. Ho fokotsa tšenyo ka lebaka la ho imeloa haholo.
• Mojaro o moholo: 220 lbs. (Lik'hilograma tse 100)
• Mojaro o fokolang: 50.6 lbs. (23kg)

MAXIMUM LEKHOTLA LETS'ELA
Hoverboard e sebetsa bakeng sa bolelele ba lik'hilomithara tse 14.9. Ho na le lintlha tse 'maloa tse tla ama mokoloko oa likoloi, joalo ka:
Kereiti: Sebaka se boreleli, se bataletseng se tla eketsa mokoloko, ha sebaka se sekameng kapa se maralla se tla fokotsa mokoloko.
Boima ba 'mele: Boima ba mokhanni bo ka ama mokoloko oa likoloi.
Ambient Themperature: Ka kopo palama le ho boloka Hoverboard mochesong o khothalletsoang, o tla eketsa lebelo la ho khanna.
Tlhokomelo: Tefiso e sa fetoheng ea betri e tla thusa ho eketsa mefuta le bophelo ba betri.
Lebelo le Sebopeho sa ho Khanna: Ho boloka lebelo le itekanetseng ho tla eketsa mefuta. Ho fapana le moo, ho qala khafetsa, ho emisa, ho potlakisa le ho fokotsa matla ho tla fokotsa mokoloko.

TEKANYETSO EA LEBELO
Hoverboard e na le lebelo le holimo la 6.2mph (10 kmh). Ha lebelo le le haufi le lebelo le lumellehang haholo, alamo ea buzzer e tla lla. Hoverboard e tla boloka mosebelisi a lekantse ho fihlela lebelo le phahameng. Haeba lebelo le feta tekanyo ea polokeho, Hoverboard e tla sekamisetsa mokhanni ka bo eona molemong oa ho fokotsa lebelo hore le be boemong bo bolokehileng.

HO ITHUTA HO KHAOTSA
MOHATO 1: Beha Hoverboard sebakeng se bataletseng
MOHATO 2: Ho bulela Hoverboard ea hau, tobetsa konopo ea Power
MOHATO 3: Beha leoto le le leng holim'a pad. Sena se tla etsa hore motlakase o kengoe le ho bonesa lebone la ponts'o.
Sisteme e tla iketsa ka mokhoa o ikemetseng. Ka mor'a moo, beha leoto la hau le leng holim'a sethala se seng.
MOHATO 4: Kamora ho ema ka katleho, boloka botsitso le setsi sa khoheli se tsitsitse ha Hoverboard e le maemong a emeng. Etsa metsamao e menyenyane ea pele kapa ea morao u sebelisa 'mele oohle oa hau. U SE KE UA ETSA LINTHO TSOHLE TSA BOHLOKOA.
MOHATO 5: Ho tjekela ka leqeleng kapa ho le letona, its'etleha 'mele ka tsela eo u lakatsang ho ea ka eona. Ho beha leoto la hau le letona pele ho tla sutumetsa koloi LEFU. Ho beha leoto la hau le letšehali pele ho tla lebisa koloi NAKONG.
MOHATO 6: Boloka Hoverboard e leka-lekaneng. Tlosa leoto le le leng kapele, ebe u tlosa leoto le leng.

TEMOSO!
SE KE UA TLOELA holim'a Hoverboard ea hau. Sena se tla baka tšenyo e mpe. Ka hloko hata sesebelisoa feela.

HLOKOMELA
• Se ke oa fetoha ka bohale
• Se ke oa potoloha ka lebelo le phahameng
• Se ke oa khanna kapele matsoapong
• Se ke oa leba kapele matsoapong

MOTS'ELISO PELE
Nakong ea ts'ebetso, haeba ho na le phoso ea sistimi, Hoverboard e tla susumetsa bakhanni ka litsela tse fapaneng. Letšoao la alamo lea bonesa, molumo o lla hanyane ka hanyane, 'me sistimi e ke ke ea kenella ka mokhoa o itekanetseng maemong ana:
• Haeba u ka kena Hoverboard ha sethala se sekametse pele kapa morao
• Haeba betri voltage tlase haholo
• Haeba Hoverboard e le maemong a ho tjhaja
• Haeba u khanna ka lebelo le leholo
• Haeba betri e na le bokgutshwane
• Haeba mocheso oa koloi o phahame haholo

Ka Mokhoa oa Ts'ireletso, Hoverboard e tla tima haeba:
• Sethala se sekametse pele kapa morao ho feta likhato tse 35
• Lithaere li koetsoe
• Betri e tlase haholo
• Ho na le sekhahla se phahameng sa tšollo ea metsi nakong ea tšebetso (joalo ka ho nyolla matsoapo)

TEMOSO!
Ha Hoverboard e kena Mokhoa oa Ts'ireletso (enjene e tima), sistimi e tla emisa. Tobetsa sebaka sa leoto ho notlolla. Se ke oa tsoela pele ho khanna Hoverboard ha betri e felile, hobane sena se ka baka kotsi kapa tshenyo. Tsoelo-pele ea ho khanna tlasa matla a tlase e tla ama bophelo ba betri.

HO ETSA TJHELETE HO KHAOTSA
Ithute ho khanna Hoverboard sebakeng se bulehileng ho fihlela o ka kena le ho tima sesebelisoa habonolo, ea pele le morao, ho reteleha le ho emisa.
• Apara liaparo tse tloaelehileng le lieta tse sephara
• Khanna libakeng tse bataletseng
• Qoba libaka tse petetsaneng
• Hlokomela tumello ea ho qoba ho tsoa likotsi

HO KHAFA KA TS'IRELETSOE
Bala ka hloko mehato e latelang ea polokeho pele o sebelisa Hoverboard ea hau:
• Ha u khanna Hoverboard, etsa bonnete ba hore u nka mehato eohle e hlokahalang ea polokeho, joalo ka ho roala helmete e netefalitsoeng ke CPSC, mekotla ea lengole, mekotla ea litsoeng le lisebelisoa tse ling tsa ts'ireletso
• Hoverboard e lokela ho sebelisoa feela molemong oa motho 'me ha ea etsetsoa lits'ebetso tsa khoebo, kapa ho sebelisoa litseleng tsa sechaba.
• U thibetsoe ho sebelisa Hoverboard tseleng efe kapa efe. Botsa ba boholong sebakeng sa heno ho netefatsa hore na u ka palama u sireletsehile kae. Mamela melao eohle e sebetsang
• Se ke oa lumella bana, maqheku kapa bakhachane ho palama Hoverboard
• Se ke oa khanna Hoverboard ka ts'usumetso ea lithethefatsi kapa joala
• Se ke oa nka lintho ha u khanna Hoverboard ea hau
• Ela hloko litšitiso tse ka pel'a hao
• Maoto a lokela ho phutholoha, mangole a kobehile ho o thusa ho tsitsisa
• Etsa bonnete ba hore maoto a hau a lula holim 'a limmete
• Hoverboard e lokela ho tsamaisoa ke motho a le mong ka nako
• Se ke oa feta mojaro o moholo
• Boloka sebaka se sireletsehileng ho tloha ho ba bang ha u ntse u khanna Hoverboard ea hau
• Se ke oa etsa lintho tse sitisang ha u ntse u khanna Hoverboard ea hau, joalo ka ho bua fonong, ho mamela li-headphone, jj.
• U se ke ua khanna libakeng tse thellang
• Se ke oa chencha ka lebelo le phahameng
• Se ke oa khanna libakeng tse lefifi
• Se ke oa khanna holim'a litšitiso (makala, matlakala, majoe, jj.)
• Se ke oa khanna libakeng tse moqotetsane
Qoba ho khanna libakeng tse sa bolokehang (haufi le khase e ka chang habonolo, mouoane, mokelikeli, jj.)
• Hlahloba le ho tiisa li- fasten tsohle pele u khanna

MATLA A KHABANE
U tlameha ho emisa ho khanna Hoverboard ea hau haeba e bontša matla a tlase, ho seng joalo e ka ama ts'ebetso:
• Se ke oa sebelisa betri haeba e ntša lephoka
• Se ke oa sebelisa betri haeba e dutla
• Se ke oa lumella bana kapa liphoofolo haufi le betri
• Tlosa tjhaja pele o khanna
• Batri e na le lintho tse kotsi. U SE KE UA BULA LEBAKA. O SE KE WA KENYA TSOHLE KA BATLE
• Sebelisa feela tjhaja e neng e fanoe ka Hoverboard. U SE KE UA SEBELISA BACHA BA BANG
• Se ke wa tjhaja betri e tjhajollotseng ho feta tekano
• Lahla betri ho latela melao ea lehae

TS'ELISO
Sebelisa feela tjhaja e neng e fanoe ka Hoverboard ea hau.
• Netefatsa hore kou e omme
• Hlakola thapo ea ho tjhaja ho Hoverboard
• Hokela thapo ea ho tjhaja motlakase
• Lebone le lefubelu le supa hore le se le qalile ho tjhaja. Haeba lebone le le tala, hlahloba hore na cable e hokahane hantle
• Ha lebone la sesupo le fetoha ho tloha khubelu ho ea ho e tala, hona ho supa hore betri e tjhajilwe ka botlalo. Ka nako ena, ka kopo emisa ho tjhaja. Ho lefisa ho feta tekano ho tla ama ts'ebetso
• Sebelisa setsi se tloaelehileng sa AC
• Nako ea ho tjhaja ke lihora tse ka bang 2-4
• Boloka tikoloho ea ho tjhaja e hloekile ebile e omme

MOCHESO MOCHESO
Mocheso o khothalletsoang oa ho tjhaja ke 50 ° F - 77 ° F. Haeba mocheso oa ho tjhaja o chesa haholo kapa o bata haholo, betri e ke ke ea tjhaja ka botlalo.

LITŠOANTŠISO TŠOANE
BATTERY: LITHIUM-ION
NAKO YA HO SHASE: LIHORA 2-4
TLHOKOMELOTAGE: 36V
BOKHONI BA PELE: 2-4Ah
MOCHESO OA HO SEBETSA: 32°F – 113°F
HO KHETHA Mocheso: 50°F – 77°F
NAKO EA HO BOLOKA: Likhoeli tse 12 AT -4 ° C - 77 ° F
BOLOKA BOIKOKOBETSO: 5% -95%

LITLHOKOMELISO
Lithium-ion libeteri li na le lintho tse kotsi. Tsamaisa ka sekepe ho latela melao ea lehae.

POLOKO LE KHABANE
Hoverboard e hloka tlhokomelo e tloaelehileng. Pele o etsa lits'ebetso tse latelang, etsa bonnete ba hore motlakase o tima le hore thapo ea ho tjhaja e hakolitsoe.
• Tjhaja betri ka botlalo pele o boloka
• Haeba o boloka Hoverboard ea hau, tjhaja betri bonyane hanngoe likhoeling tse ling le tse ling tse tharo
• Haeba thempereichara e haufi e ka tlase ho 32 ° F, u se ke ua tjhaja betri. E tlise tikolohong e futhumetseng (kaholimo ho 50 ° F)
• Ho thibela lerōle ho kena Hoverboard ea hau, e koahele ha e le polokelong
• Boloka Hoverboard ea hau sebakeng se omileng, se loketseng

PHETLA
Hoverboard e hloka tlhokomelo e tloaelehileng. Pele o etsa lits'ebetso tse latelang, etsa bonnete ba hore motlakase o tima le hore thapo ea ho tjhaja e hakolitsoe.
• Hakolla tjhaja ebe o tima koloi
• Hlakola sekoahelo
• Qoba ho sebelisa metsi kapa lintho tse ling ha u ntse u hloekisa. Haeba metsi kapa maro a mang a kena ka har'a Hoverboard ea hau, e tla baka tšenyo e sa feleng ho elektroniki ea eona ea kahare

LITLHAKISO TSA HOVERBOARD LE LITLHAHISO
Mocheso o khothalletsoang oa ho tjhaja ke 50 ° F - 77 ° F. Haeba mocheso oa ho tjhaja o chesa haholo kapa o bata haholo, betri e ke ke ea tjhaja ka botlalo.

BOIMA BO KAHARE: 21 lik'hilograma
Moroalo o moholo 50.6 liponto - lik'hilograma tse 220.
Lebelo la MAX: 6.2 mph
RANGE: LILEMO TSE 6-20 (HO TLAMEHILE HO PALAMA STYLE, TERRAIN, jj.)
MAX Climling INCLINE: 15°
LEFATŠE LE MOTSOALLE LA HO FETOLA: 0°
BATTERY: LITHIUM-ION
TLHOKOMELISO EA MATLA: AC100 - 240V / 50-60 HZ TLHALOSO EA LEFATŠE
DIMENSION: 22.9 "LX 7.28" WX 7 "H
HO HLAKOLA Hantle: 1.18”
Bophahamo ba Plate: 4.33”
TIRI: TIRE SEBETSO SE SEBELETSO
SEBETSA volTAGE: 36V
MOKHOA OA BATRI: 4300 MAH
MOTHO: 2 X 350 W
LITLHAKU TSE KHOLO: PC
NAKO EA HO FIHISA: LIHORA 2-4

HO BATLE PHOSO
Hoverboard e na le tšobotsi ea ho itlhahloba ho e boloka e sebetsa hantle. Ha ho ka ba le ho se sebetse hantle, latela litaelo tsena ho qala sistimi:

MOHATO 1: Beha Hoverboard sebakeng se bataletseng
MOHATO 2: Lumellanya halofo ka bobeli
MOHATO 3: Lumellanya Hoverboard hore e tšoane le fatše
MOHATO 4: Tšoara konopo ea Power ho fihlela u utloa molumo o mong o phahameng oa lentsoe, ebe u lokolla. Mabone a ka pele le mabone a betri a tla qala ho bonesa. Mabone a ka pele a LED a tla bonesa kapele makhetlo a 5. Hoverboard joale e tla ipeha bocha
MOHATO 5: Tobetsa konopo ea Power hape ho e tima
MOHATO 6: Bulela Hoverboard hape. E se e loketse ho palama

TŠEBELETSO EA WARRANTY / CUSTOMER
Lintho tse tsebahalang tsa Sharper Image tse rekiloeng ho SharperImage.com li kenyelletsa waranti e lekanyelitsoeng ea selemo se le seng. Haeba u na le lipotso tse sa kenyelletsoeng tataisong ena, ka kopo letsetsa lefapha la rona la Ts'ebeletso ea Bareki ho 1 877-210-3449. Basebeletsi ba Ts'ebeletso ea Bareki ba fumaneha ka Mantaha ho isa Labohlano, 9:00 hoseng ho isa ho 6:00 pm ET.

Sharper-Image-Hoverboard-207208-Manual-E ntlafalitsoe

Sharper-Image-Hoverboard-207208-Manual-Original.pdf

Litšupiso

• Bukana ea Mosebelisi