SDS DIGITAL V14 Sequarallel Midi Ho isa CV-Gate-Velocity Midi Sequencer module

Selelekela

Re leboha ha o rekile Accord Sequarallel e feto-fetohang! Ka 8 HP feela, sequencer ena ea MIDI/CV e tla ba tlatsetso e ntle ho rig ea hau, mme e kanna ea fetoha setsi sa lipina le taolo moo tatellano ea MIDI e amehang.

Na Module ona o ka etsa eng
Sequaralel e ka rekota le ho bapala MIDI ka mekhoa e fapaneng ho tloha ho tatellano e bonolo ea tracker ho ea ho tlhophiso e laoloang habonolo. Ho bapala le ho rekota ho kopanya ka mokhoa o ts'oanelang ho etsa hore e be mojule o motle bakeng sa ts'ebetso e phelang, 'me ho u fa khefu ho tloha ka letsoho ho kenya mehato e kang ea sequencer e tloaelehileng, leha khetho e ntse e le ho etsa joalo. Ho fihla ho li-trackers tse 40 tsa TRAX, mehato e 'ngoe le e' ngoe e fihlang ho 64 e nang le litselana tse 4 e ka hlophisoa, ea rekotoa, kapa ea hlophisoa ka "pina" e le 'ngoe. Tsena li ka bapaloa 5 hang-hang 'me tracker e' ngoe le e 'ngoe e ka ba le seteishene sa eona sa MIDI / boema-kepe le lipehelo tsa Heke / CV. Bolelele bo feto-fetohang ba tatellano, oache, 'me o ikhethile ka libanka tsa noteFX, ho fihla ho 8 ka tracker, e etsa hore menyetla e be e sa feleng! Ho tloha ka har'a PlayList, lipaterone tsena tsa TRAX tsa sequencer li ka eketsoa 'me tsa kenngoa sehlopheng se seholo sa tatellano, se bitsoang A ho ea ho H. Paterone e' ngoe le e 'ngoe ho PlayList e ka ba le FX e ikhethang e sebelisitsoeng hape, leha e se na letho haeba e rekota, e ncha. mekhoa e tla be e se e sebelisitsoe FX. Mokhoa o fapaneng oa ho rekota o tla fetola lintlha ka tatellano ntle le ho fetola bolelele ba tsona, boemo kapa FX. Ho bapala tatellano ea "Pina" e rekotiloeng ea MIDI ho nolofalloa ka ho beha matšoao a loop ho tsoa mohloling oa hau, kapa ho eketsa hamorao. Rekote ea Pina e kopitsoe hantle feela joalo ka ha e tlalehiloe empa e tla lula e hokahane le rig ea hau, ha ho bothata.

Likarolo tsa MIDI li ka eketsoa ka molaoli kapa keyboard ea MIDI, esita le DAW, 'me e ka ba MIDI efe kapa efe ho tsoa ho lintlha, MIDI CC's, liphetoho tsa lenaneo, kahoo e ka hahoa ka ho rekota ho fihlela ho 8 ka botebo ka konopo ea Layer, eo ho eona ho ka khonehang. e be 4. E 'ngoe le e 'ngoe ea Mekhahlelo ena e abetsoe lengolo e le hore lintlha tse sa tšoaneng tsa mohaho li ka fumanoa ka har'a PlayList. Likarolo tse rekotiloeng nakong ea Song Loop li tla fihla boholong boo ka boiketsetso, kahoo o hloka feela ho tobetsa konopo ea Rekota ho theha pululelo eo! Ho boetse ho na le MIDI2CV e tobileng e nang le litlhophiso tsa ho fihlella kapele ha Sequarallel e sa tatellane. Morero o mong le o mong oa "Pina" o na le litlhophiso tsa ona tse kopitsitsoeng ho Pina ea 00 kahoo hang ha li se li hlophisoa ka tsela eo u e ratang, ho bonolo ho tlolela kahare. Li-jacks tse 12 li fetoha liheke tse 12 kapa liphetho tsa li-trigger tse nang le molaetsa o potlakileng oa skrineng sa MIDI ho khetho ea Jack bakeng sa mocha o khethiloeng oa MIDI bakeng sa molumo. Ho ka sebelisoa litlhophiso tse fihlang ho tse 8 lefatšeng ka bophara kahoo pina, tatellano, kapa kenyelletso ea MIDI, e nang le melumo e tla romelloa li-jacks tsena. Litlhahiso tsa CV tse ka tlase ho liphetho tse kholo li ka hlophisoa e le balaoli ba ka hare, balaoli ba MIDI, kapa esita le lintlha tsa heke + tse lokelang ho fetoleloa ho MIDI kapa ho rekotoa ho tracker ea TRAX kapa MIDI Layer. Boema-kepe ba bobeli ba MIDI bo ka morao bo ka sebetsa joalo ka kopano ea phanele e ka pele, kapa taolo e hole ea MIDI, 'me e hlahisoa ho li-module tse nang le bokhoni ba MIDI.

Lintlha
Tataiso ena ho hang ha e akaretse likarolo/mesebetsi eohle ea mojule ona empa ke ho u qalisa leeto le leholo ka bokhoni ba Sequarallel! Leha mojule ona o etselitsoe ho nka advantage ea +/- 12 Volt rails ka har'a sejoale-joale sa eurorack console, ho na le monyetla oa ho sebelisa Sequarallel ho tsoa matleng a USB feela.

Sena se na le meeli:

1. e 'ngoe ea li-jacks tsa CV e tla sebetsa kaha tsena li itšetlehile ka +/-12V
2. Ha ho le e 'ngoe ea likenyelletso tsa CV e tla sebetsa ka mokhoa o tloaelehileng
3. Kenyelletso ea oache e tla sebetsa, empa tikolohong e tsamaeang ho ka sebelisoa Self Clock (tlasa [CLOCK:/1] QB), kapa oache ea MIDI.
4. Khetha bese (PSU I/O) e ke ke ea sebetsa
5. Boema-kepe ba MIDI LINK bo ke ke ba sebetsa, empa li-jacks tsa MIDI I/O li tla sebetsa

Sebaka sa Tataiso ena

Tataiso ena ke qalo e potlakileng ea ho u tloaelana le Sequaralel ka example mme ke sebaka sa ho tlola bakeng sa Bukana ya Mosebedisi e felletseng. (http://www.freshnelly.com/sequarallel/sequarallel.htm) Ho bonolo ho bala 'me e ke ke ea kenella haholo litlhophisong le mesebetsing e rarahaneng ho feta 😉

Lethathamo la mantsoe/litumellano tse sebelisitsoeng tokomaneng ena

• QB Konopo ea Quick-Lebokose. E hlaha skrineng se seholo le ho bahlophisi. Tsena li ka tsamaisoa le ho khethoa.
• Tšoara Sena ke ho sututsa le ho ts'oara konopo ea khouto bakeng sa > motsotsoana o le mong ho fihlella [QB] manane le manane. Ho ts'oara > motsotsoana o le mong o tla Tsoa ho menu kapa lethathamong leha e le lefe ha feela e se ho [QB] kapa konopo ea Toggle (ke hore MIDI Channel grid) Tlas'a QB Sena ke sesupo sa hore na skrine e tla buloa neng ha QB e tšoaroa > motsotsoana o le mong.
  Penya Habeli Likhatiso tse peli tse latellanang holim'a konopo ea encoder ka metsotsoana e 3/4 (joaloka toeba)
  Tlanya Hararo Lihatelli tse tharo tse latellanang holim'a konopo ea encoder nakong ea metsotsoana e 1.5 sebaka sa mosebetsi sa Song Projector. Pina e kholo ea MIDI e ngotsoe. Tsamaisetsa Ho potoloha konopo ya encoder ho supa QB kapa ntho e lethathamong, kapa seta boleng.
• Theosa Sena se bua ka QB eo, ha e tobetse, "e phutholoha" ho tse 'maloa ho theosa le ho khetha likhetho.
• [-] E bolela Konopo ea Quick-Box, ka tsela eo e hlahang skrineng
• nnn E supa palo ea linomoro tse 1,2, kapa tse 3, hangata joalo ka ha e hlaha skrineng
• xxx E hlalosa lebitso la kgetho eo e seng ya dinomoro jwalo ka “SIZE” kapa “INPUT” ka lenane le hlalosang le latelang.

Phanele
Li-jacks tsa phanele li entsoe ka Mela e 4 ea liphetho, MIDI In/Out, Clock In/Out, le 2 CV I/O jacks. Clock Out e ka hlophisoa e le kenyeletso e 'ngoe ea Heke/CV. Likonopo tse peli ke tsa Play/Stop/Record. Pontšo e bonts'a encoder e tsamaeang ka har'a likonopo tse "Quick-Box" tse skrineng tse tla hlalosoa ha o ntse o tloaelana le Sequaralel. Encoder e boetse e na le konopo ea push-button e totobatsoang ho khetha ho hlophisa ntho e itseng, kapa "tšoaroa" (> 1 motsotsoana) bakeng sa ho kenya le ho tsoa manane kapa menus.

• Encoder Knob: Konopo ea encoder e sebelisoa bakeng sa ho khetha Mabokose a Potlakileng ho nolofalletsa / ho tima mesebetsi, ho fetola litlhophiso, kapa, ha e ts'oaroa, ho kenya litlhophiso tse nepahetseng.
• Likonopo tsa P & S: Konopo ea P haholo-holo ke mokhoa oa ho bapala, ha konopo ea S e le ho Stop Play kapa ho lahla ho rekota. Ho tobetsa konopo ea P ha u ntse u bapala ho tla qala ho bapala hape. Haeba likonopo ka bobeli li tobisitsoe hammoho, mokhoa oa Song Record o hlometse (ka bobeli ba flash).
  Li-Jacks tse ka sehloohong: Li-jacks tse 12 tse holimo li hlophisitsoe ka lihlopha tse 'nè tsa li-jack tse 3 e' ngoe le e 'ngoe. Sehlopha se seng le se seng, kapa CV Channel, e na le Heke (trigger), Velocity/CC1-4, le CV (1V/octave) liphetho. Nakong ea Drum Mode, tsena tse 12 li hlophisitsoe e le lihlopha tse theohang ka lipalo tsa 4 tse shebileng ka jack e holimo-limo ka ho le letšehali.
• CC Jacks: Li-jack tsa 2 CC tse ka tlase ho tse 12 tse kholo ke I/O e abetsoeng ke mosebelisi. E le lisebelisoa, ba ka romela MIDI CC's, PC, Pitch Bend, kapa li-triggers tse ka hare. E ka hlahisa hoo e ka bang eng kapa eng!
• MIDI ho Jack: MIDI ka jack e sebelisetsoa ho hlahloba MIDI ho ea ho jack ea tlhahiso, ho rekota, le ka plug e tloaelehileng ea T / S, bakeng sa ho qalisa Play kapa Stop of tatellano ho hokahanya le patch ea tsamaiso.
• MIDI out Jack: MIDI ho tsoa ho tatellano e tla kopana le tlhahiso ea MIDI ho hlahisoa mona.
• Oache I/O: Nakong ea oache ea MIDI, Clock e tla hlahisoa. Nakong ea Modular Clock in, CKout e ka ba CV kapa e kenya letsoho bakeng sa mesebetsi / litsamaiso tse ngata tsa ka hare. (mosebelisi o lokiselitsoe)

Mabapi le Pina:00Sefela: 00 ke "moqali" kapa "sebaka sa ho paka" ho leka pina kapa tatellano. U ka e rekota le ho hlophisa TRAX kapa Lethathamo la Lipina, empa u ka e boloka feela hore e be nomoro e 'ngoe ea Pina. ke hore, "BOLOKA AS:01" Lebaka la sena ke hore o tle o tsebe ho lokisa tsela eo o batlang hore Sequaralel e qale ka eona qalong. U kanna oa shebana le li-trackers 'me u kanna ua batla ho qala ka likonopo tsohle tse 5 tsa TRAX Quick-Box skrineng, empa ha ho likonopo tsa Layer. Mohlomong ha ho mohla u tla rekota lipina tsa MIDI joalo ka LOOP, JUMPTO, le

SONGFX

Li-QB li ka tlosoa. Ho hlophisa li-QB ho ka etsoa ka har'a [SETTINGS] Quick-Box, e tlamehang ho lula e le teng. Kapa mohlomong u ka rata hore litlhophiso tse ling tsa TRAX Record, joalo ka lintlha tse hole, karolelano ea oache, kapa liteishene tsa MIDI, li be teng ha u qala projeke e ncha, ho boloka nako le ho boloka lintho li hlophisitsoe.

Pina:
e lokela ho nkoa e le seile se se nang letho se seng se loketse ho qala ho haha ​​hang-hang. Ha u ntse u tloaelana le Sequarallel, u tla bona hore na mokhoa ona o matla hakae!

Mokhoa:
Kahoo Sequaralel e sa tsoa sebetsa, 'me e tla ba Pina ea ho qetela eo u neng u le ho eona pele, empa u batla ho qala morero o mocha.

• Tsamaisetsa ho [SONG:nn], tobetsa o daele tlase ho SONG:00. Tobetsa ho e Laela. U ka qala ho sebetsa morerong ka Song:00, empa hajoale, haeba u batla ho e boloka:
• Tsamaisetsa tlase ho [BOLOKA: EDIT], tobetsa ho bula "ho theoha" ebe u khetha [BOLOKA* JOALOKA..]
• Tobetsa, ebe u khetha nomoro ea pina ho boloka morero tlas'a. Tobetsa ho e khetha. Joale u tla kenya Lethathamo la Mabitso, cursor e seng e ntse e le ka lebitso ho e hlophisa. o ka tobetsa le ho tšoarella ho tsoa, ​​kapa: Tsamaisetsa ho Lengolo ebe o tobetsa ho hlophisa lebitso la projeke ea hau. Tobetsa ho boloka Lengolo le ho fallela ho e 'ngoe.
• Hang ha u qetile, tsamaisetsa qetellong ea lebitso hore u tsoe ('me u khethe lebitso le leng leo u tla le hlophisa), kapa u tšoare feela mochine oa khokahanyo ho tsoa lethathamong.

U ka reha projeke efe kapa efe bocha ka ho tšoarella ho [SEPELA:nn] QB ka nako efe kapa efe Joale u ho Morero o mocha oa Pina o tla ba le litšobotsi tsohle ho tsoa ho SONG:00.

Ho boloka nako le nako ka SAVE: EDIT

Ha u ntse u sebetsa morerong, haholo-holo o moholo, ho kgothaletswa hore o boloke nako le nako ha motlakase o ka sitiswa. Ka lehlakoreng le leng u ka 'na ua se ke ua batla ho e boloka! Haeba u etsa:

• Tsamaisetsa tlase ho [BOLOKA:EDIT] QB ebe o tobetsa ho eona ho khetha li-QB tse theoha.
• Tobetsa ho [BOLOKA: EDIT] hape ho khetha. Ho tla hlaha molaetsa oa "SURE?NO".
• Tsamaisetsa ho "YES" ebe o tobetsa. Sena se tla boloka tokiso ea hau ho fihlela mona.

Ho boetse ho na le Auto-Save e ngolang bekapo nako le nako, sena ke ho hlaphoheloa ha motlakase o hloleha nakong ea Save Edit mme o tla khutlisa setšoantšo ka bohona ho matla a latelang.

Ho boloka Edita ho SON:00

Ho thibela ho fetola pina ea 00 ka phoso, mokhoa oa ho e boloka o fapane hanyane…

• Tsamaisetsa ho [BOLOKA: EDIT] 'me u tobetse ho bula menyetla
• Tsamaisetsa ho [BOLOKA:INIT] ebe o tobetsa. Sena se tla etsa hore "SURE: NO"
• Tsamaisetsa ho khetha "YES"
• Tobetsa 'me u tšoare encoder bakeng sa metsotsoana e 1 ho isa ho e 2 empa eseng metsotsoana e 5.

Ho tla ba le netefatso (li-brackets tse hatselitsoeng le tsona)

Ho tsosolosa PINA:00
Song 00 e ka khutlisetsoa ho boleng ba feme ka botlalo. Sena se ke ke sa ama merero efe kapa efe ea Pina. Latela mokhoa oa "Saving an Edit to Song:00" ka holimo, empa tšoara encoder bonyane metsotsoana e 8.

Hlokomela: Sena se tla seta bocha liphetoho tsohle tseo u li entseng ho Song:00 'me li ke ke tsa khutlisoa!

Ho boloka Morero Libakeng Tse Ling
U ka 'na ua batla ho boloka "mofuta ona" oa morero oa hau ho nomoro e 'ngoe ea Pina. Sebelisa feela [BOLOKA: AS..] ho drop-down ebe u khetha nomoro e ncha. Papali e tlameha ho emisoa. Ho boetse ho na le SysEx Save (bona buka ea mosebelisi)

Ho hlakola Morero
Morero o tlameha ho laeloa ho hlakola. Tobetsa [BOLOKA: EDIT] ebe u tsamaisetsa ho [Tlosa] ebe u tobetsa. U tla susumelletseha joalo ka tšireletso, "RE? NO", tsamaisetsa ho e, ebe o tobetsa. Morero o tlositsoe.

Ho rekota

Sequarallel e na le mefuta e 3 e meholo ea bokhoni ba ho rekota, Pina e felletseng ea MIDI, MIDI Layers, TRAX tracker rekota. Likarolo le ho rekota TRAX le tsona li ka etsoa ka Heke / CV ntle le MIDI. Haeba ha u batle ho rekota hona joale, nka etsa tlhahiso ea ho kenya demo Song:61? Lintho tse ngata li sebelisoa ho demo 'me li u fa ntho eo u ka e fetolang hang-hang!

Pina ea MIDI

Theha kapa u khoasolle pina eohle ea MIDI (e le 'ngoe kapa e mengata) ho e rekota ho Sequaralel bakeng sa ho thella le ho e beha holim'a / tatellano ka. Lipina tse ngata tseo u ka li khoasollang li tla tsamaea hantle, 'me haeba ho se joalo, li kenye ka har'a software e kang Reaper ho e tsamaisa hantle pele u e rekota. Sebopeho sa hau (ho tsoa ho DAW) se ka rekotoa ka lintlha tsa Loop Marker, ho nolofatsa ts'ebetso eohle. Ho ho uena.

Ho kenya Li-Loop Markers
Sebaka sefe kapa sefe se nang le lesupa la loop ho sona se tla hlophisoa joalo ka "Loop To" le "Jump To". Li-mark marks li behiloe ka ho kenyelletsa Note # 121 (C# 10) bareng eo u batlang ho ikamahanya le eona. Sena, ehlile, e tla boela e be pheletso ea loop. Matšoao ana a ka ba mocha ofe kapa ofe 'me a ke ke a bapala.

Arm to Record
Joalo ka mokhoa o motle, tsamaisetsa tlase ebe u khetha [SONG:nn] Quick-box 'me u e hlophise hore e kenye pina ea kamehla: 00. Leha e le efe e ncha Lipina molemo ka ho fetisisa etsoa mona ho fihlela u tloaela ho feta.

• Tlosa Clock In 'me u netefatse hore mohloli o tla romela lioache tsa MIDI (eseng liforeimi tsa MTC)
• Hokela MIDI ea hau (Mofuta oa A oa TRS) ebe o tobetsa likonopo ka bobeli P & S ho rekota letsoho.
• Bapala mohloli oa hau oa MIDI 'me li-LED tsa P/S li tla emisa ho phatsima' me li lule li tiile.
• Haeba mohloli oa hau o sa emise ka bohona, emisa hang ha ho rekota ho phetheloa.

Ntle le moo, haeba u batla ho rekota feela ho bapala keyboard, u ka sebelisa oache ea hau ea modular ho "boloka morethetho" ka ho penta Clock In le ho hlomella ho rekota. Haeba oache e se e ntse e sebetsa, ho rekota ho tla qala ka MOLAO oa pele o bapaloang, ho qala ka morethetho oo e neng e le ho ona. Sena se sebetsa le bakeng sa ho kenya Gate/CV (litlhophiso tsa MIDI PUSH, bona bukana e kholo ea mosebelisi)

E bapale hape!
Tšoaea ka mokhoa oa modular oache. Bakeng sa Clock/1 e lokela ho ba liboseleise tse 2/motsotsoana. Haeba oache ea hau e potlakile, khetha CLOCK/nn 'me u e behe e le hore palo e kholo ea ho otla ha skrineng e shebahale e tsamaile hantle. Tobetsa konopo ea "P" (play) ho qala ho bapala, "S" (stop) konopo ho emisa. Ntle le moo, o ka tobetsa "P" ho bapala, ebe o qala oache ea hau. Ho molemo ho tsamaisa oache metsotsoana e seng mekae ho "tloaela" Sequaralel le eona pele u bapala papali ea lihlomo. Mohloli oa MIDI o nang le lipalangoang le MIDI Clock le ona o tla sebetsa ho qala Sequaralel ho bapala, empa Play e ntse e tlameha ho ba le libetsa. Ka tsela ena, tatellano e ka qaloa bohareng ba tatellano e 'ngoe ea MIDI ho tsoa ho DAW kapa molaoli ea nang le oache ea MIDI le lipalangoang. Sequarallel e boloka tlaleho ea lipina!

Loping
Haeba pina/sebopeho sa MIDI seo u se rekotileng se na le Li-Loop Markers tse kentsoeng tse boletsoeng ka holimo, u ka bulela Loop Quick-Box ha u ntse u bapala ho Loop karolo ea pina. Haeba ho ne ho se na loops, joale u ka hlophisa tse ling ha Pina e ntse e bapala ho Song Editor (e tla hlahloba) ho beha linomoro tsa bar bakeng sa Loops. Ka tsela efe kapa efe, tsena li ka hlophisoa ka ho tšoara encoder ho [LOOP:x] ho kenya Loop List le bahlophisi.Loops e ka eketsoa, ​​ea kengoa, ea lokisoa, le ho hlakoloa mona. Tlhokomeliso: Loops kamehla Quantize to Bars.Ho ADD a Loop, tsamaisetsa tlase ebe o tobetsa LOOP:x ADD.

• Ho kenya, tsamaisetsa ho: INSERT MARKERS ebe o tobetsa ho bulela, ebe o tsamaisetsa tlase ho Loop eo o batlang ho e kenya ho eona, boholo bo tla aroloa ho lumellana.
• Ho phumula loop bulela: PHUMELA LITŠOANTŠISO 'me u tsamaise ho lupu ho e hlakola, boholo bo tla eketsa loop e latelang. Ho hlakola liloko tsohle, tlanya ho :DELETE:ALL:SONGFX.
• Tlhokomeliso: sena se tla hlakola liloko tsohle le lipina tsa bona tsa lipinaFX!
• LOOP SONG+NOONE / TRAX / LAER / BOTH khetha hore na litlhahlobo tse ling le tsona li tla emisa eng lenaneng la Play ha QB e setetsoe ho [LOOP: ON]
• Bontša: BARS+BEAT kapa TO MARKER e beha se bonts'ang ho LOOP:xx QB ha cursor e se ho eona. Lipina tsena tsa Loops 1 ho isa ho 17 le tsona li ka hlohlelletsoa ho bapala lenaneng la Playlist le tla tšohloa hamorao.

Jump To
TLHELA HO:nn QB e na le mekhoa e 'meli, tlolela ho Lihlopha tsa Lenane la Lipapali (G0, G1 joalo-joalo), kapa ho Mela ea Lethathamo la Lipapali (01,02, joalo-joalo) Ena ke tsela e potlakileng ea ho fetola hore na ke likarolo life tsa Lethathamo la Lipapali tse tla bapala ka mor'a moo, ntle le ho kena Lenaneng la Lipapali le mela ea matsoho kapa li-block haeba li hlophisitsoe ka tsela ena. Hape e ka laoloa ka PLFX, Remote MIDI kapa CV.

(Ho rekota) A TRAX Tracker Sequence

Li-trackers tsa TRAX li na le litselana tse 4 ka bophara, kahoo li ka amohela lintlha tse 4 ka nako e le 'ngoe. Ha e rekoa, lintlha li tla fokotsoa (ntle le haeba li setetsoe) ho Mehato ea Tracker. Haeba motho a thabetse li-setting tsa kamehla, Clock * 2, Mehato e 16, le litlhophiso tsa rekoto ea kamehla, motho o tlameha feela ho Tobetsa TRAX Quick-Box, ebe o khetha RECORD. Lintlha tse amohetsoeng li tla hlophisoa tatelanong ha feela PLAY LED e ntse e bulehile. Empa re sehlopha se khethileng kahoo ho kenya likhetho tsa RECORD hoa hlokahala!

• Ho [TRAX – n]→[TRAX EDIT] Quick-Box, tsamaisetsa ho -RECORD- ebe o tobetsa & o hatelle ho kenya li-setting.
• Khetha likhetho 'me u tsamaise ho li fetola:
  •  DINTLHA VEL?NO Na o batla hore lebelo le rekotwe kapa boleng bo tsitsitseng ba 100?
  • EC NOTS LEN? 23 Na u batla bolelele ba lintlha ha u ntse u bapala (YES), kapa boleng bo tsitsitseng (1-23)
  • EC NOTES DEL?NO (YES) Lirekoto tsena li lieha mohato, kahoo li tlosa quantizing
  • TLA HLOKOMELA FX? HA HO lintlha tse ncha tse tla hlakola "NoteFX" eo e kanna eaba u e behile ho mohlophisi
  • E-NOTE MODE?NO Feela Rekota lintlha tse teng ka tatellano, eseng ho etsa tse ncha
  • LOBAL REC=CHAN:n Hlophisa mocha o tla rekota ho tracker ena ea TRAX (1-16, KAOFELA)
  • IDI THRU CHAN:n Lintlha nakong ea tlhahiso ea rekoto ho mocha oa 1-16, TRX (TRAX chan.), kapa che

 

LOBAL TRAX KHOTSO
Tsena ke lintlha tse matla tsa taolo tse ka fetolang tsela eo TRAX e rekotileng ka eona ha e ntse e ts'oaroa. Ho tlanya molaetsa habeli ho tla o hokela, ebe o tima tse ling. Ho thetsa hanngoe sengoloeng ho tla koala sebatli. Litlhophiso tsena, ha li khethiloe, li ka ithuta ho tsoa ho mongolo oa MIDI, kapa li ka hlophisoa ka letsoho. Ke rata ho sebelisa linotlolo tse tšoeu tse holimo ho keyboard ea ka, ebe konopo e ntšo bakeng sa senotlolo sa ho qetela se hole. Mona ke seo e mong le e mong a se etsang:

• HLAKOLA TLHOKO:nnn TRAX Mehato e tla hlakoloa ha sena se ntse se ts'oeroe, kapa se toggle (li-taps tse 2!) Lintlha tsohle tse bapaloang ha u hlakola li tla hlakola ho se hokae e le hore tatellano e fetileng e ka "phunya". Lintlha tse bapaloang pele u tlanya konopo ea DELETE ho e lokolla li tla sala.
• TLHOKOMELISO EA STACK:nnn Mongolo ona o hole o bulela Lane Stacking. Kahoo lintlha life kapa life tse bapaloang li tla tlatsa litselana ka mor'a lintlha tse seng li ntse li le teng ka tatellano, e leng ntho e ntle bakeng sa ho haha ​​​​ho latela tatellano e tsamaeang.
• TLHOKOMELISO EA CYCLE:nnn Molaetsa ona o hole ha o kenya lintlha ha o ntse o feta litseleng, o theha lintlha tse ncha kapa o ngola tse fetileng ha o ntse o le Mohato oa hajoale. Sena se ka sebelisoa ho fetola tatellano e 'ngoe ho ea ho e' ngoe.
• TLHOKOMELISO:nnn Sena se tla hopola tatellano ea boemo ba eona ba pele pele e rekota, kapa ho ea kamoo e neng e le ka teng ha e ne e tlanya habeli qetellong, ka hona, tlanya e le 'ngoe ho e hopola.

Ke khothaletsa ho beha lintlha tsena tse hole ha li ntse li ntlafatsa haholo ho bapala ka tatellano ea TRAX. Li hloka ho hlophisoa hanngoe feela bakeng sa Pina ena, empa li ka hlophisoa lefatšeng ka bophara ka ho hlophisa pina ea kamehla: 00 le ho boloka ka mokhoa o khethehileng (e sirelelitsoe). Sheba Karolo ea IV. Editing: A. a MIDI Pina Litlhophiso tsena li ka fumaneha hape ho tsoa ka har'a TRAX Editor tlasa konopo ea [RECORD]!

TRAX REMOTE CC TAOLO EA MOHATO

Ntle le ho khona ho ngola lintlha ka har'a marang-rang a TRAX, mehato e ka fetoloa hole ho sebelisoa MIDI CC ho TRAX e hole ea MIDI Channel, ka mokhoa o ts'oanang le mojule o tloaelehileng oa sequencer.

CC#'s e ka beoa ho TRAX Record Menu:

FUNC KHETHA CC#: E khetha e 'ngoe ea mesebetsi e 8 bakeng sa tatellano ea CC ho laola NOTE OFFSET CC#: Sena se lokisa molaetsa oa Root (haeba o sebelisa Scale Quantization) CC#.

MOLA O QALANG: Khokahano ea pele ea CC# bakeng sa Mohato oa pele

• Litlhophiso tsena ha li khantšitsoe ka holimo li tla ithuta MIDI, tsamaisa taolo feela!
• Hlokomela hore REKOTO e tlameha ho buloa, 'me Tatelano e tlameha ho bapala.

Boholo ba mola oa CC bo itšetlehile ka boholo ba tatellano, 8, 16, joalo-joalo.ample, CC# ho laola Mohato oa 1 ke 11. Sena se bolela Mohato oa 2 e tla ba 12, Mohato oa 3 e tla ba 13 joalo-joalo.
Mosebetsi oo mola oa CC o tla o laola o ka khethoa ka CC#43, e leng:

• ELA HLOKO HAPE: E fetola lebelo la mohato (E sebetsa le Sekala!)
• VELOCITY: E Fetola Lebelo la Mohato (Litsela Tsohle)
• LENGTH: E fetola Bolelele ba Mohato (ho ea ho> mehato e 5)
• tieho: E fetola tieho ea Mohato (0 ho isa ho 22 ticks)
• ELA HLOKO_FX: Khetha NoteFX# 1-8 bakeng sa Mohato
• FX_MAP: Bulela / tima FX Mask Mehato
• KILLA: E tlosa mohato kapa o e hopola
• SHIFT: Shifts Lane 1-4 holimo/tlase

Liphetoho tsena ke tsa ka ho sa feleng 'me li ka fetola Letter EFE KA EFE EA TRAX e ntseng e bapala, kahoo bula

(Ho rekota) Mekhahlelo ea MIDI

MIDI Layers (ho fihla ho 32 kakaretso) e ntle bakeng sa ho aha Loop ka ho bapala ka lintlha tsa MIDI, li-control tsa CC, kapa MIDI efe kapa efe, ka mekhahlelo. Sequarallel e na le 4 Layer Quick-Boxes 'me e' ngoe le e 'ngoe e ka tšoara litlhaku tse 8 tsa Layer. E 'ngoe le e 'ngoe ea Layer QB e na le pina ea eona Lenaneng la Lipapali le ho fihla ho 4 Layer Step Sequencers kahoo e ka hlophisoa ho bapala motsoako ofe kapa ofe oa Mangolo, ka tatellano efe kapa efe, a le mong kapa e le sehlopha. Bakeng sa mohlalaample, Lera ho laola Pitch Bend kanale ea MIDI e ka rekotoa feela ka ho sebelisa Pitch Wheel ho kanale e lakatsehang. Ebe Layer e 'ngoe e ka eketsoa bakeng sa chords kapa bass line, kaofela ntle le ho ama phanele!

Rekota Lera

• Tsamaisetsa ho Pina: 00 QB (Lebokose le Potlako), khetha 'me u kenye Pina ea pele:00.
• Tsamaisetsa holimo ho [LAYER:ADD] QB, khetha 'me u tsamaisetsa ho YES ho eketsa LEMELA :1
• Joale tobetsa Layer QB e ncha ebe u tsamaisetsa ho L RECORD, tobetsa 'me u behe ho 4 Bars, ho tobetsa letsoho ho rekota.
• Tlas'a [RECORD:n] QB ho na le litlhophiso tse kang 1-shot, le mekhoa ea "ho hokahanya rekoto ho" (tlohela seo hajoale!)

Joale u se u ikemiselitse ho qala ho rekota Lera la MIDI. Ho nka hore u na le mohloli oa oache (MIDI kapa Clock In) tobetsa konopo ea "P" ho qala Play. Ho theha Layers ha u ntse u bapala ke kamoo u tla be u sebelisa tšobotsi ena. Haeba ho se na tatellano ea TRAX tracker, Li-Layers tse ling, kapa Pina e bapalang, ho ka 'na ha hlokahala hore u etse "metronome" ea modular ho lula ka nako. Tsoela pele 'me u qale ho bapala. *Rekoto e ka siuoa e ntse e le lirekoto feela ha lintlha tsa MIDI, CC's, PW's li amoheloa, ho etsa Layer e ncha Nako le nako ha mekoallo e 4 e feta, rekoto e khutlisa matsoho. Lintlha tse latelang li eketsa Letere e ncha ea Layer joalo-joalo.*Ha u rekota CC's kapa PW, ela hloko mabapi le ho kenya molaoli o le mong, leha ho le joalo, e ka 'na ea thulana le ea ho qetela!

Hlakola Lengolo la Layer la ho qetela: Ho etsolla Layer, tobetsa ho

• LERA:1 * ebe u tsamaisetsa ho KILL LAST ebe u khetha YES ha u khothalletsoa.
• BTW: Haeba litlatsetso li ntse li le Leapeng lena feela, joale u ka etsolla qalong ntle le ho sebelisa memori… Empa, haeba Layer QB e ncha e entsoe mme e rekotwa ho eona, ho etsolla "khale" ho ke ke ha khutlisa mohopolo, kahoo qetellong. u tla felloa ke mohopolo ka mokhoa ona.

Lebokose le leng le le leng la Layer Quick-Box
Ka lebaka la quantizing kapa Layer Sizes, u ka khetha ho sebelisa Layer QB e fapaneng bakeng sa, ho re, FX joaloka Cut / Rez kapa enfelopo e fetoha haeba synth ea hau e tšehetsa seo ho MIDI Channel leha e le efe. ..kapa mohlomong u lebise molumo feela ho Layer QB e itseng. Ke ka lebaka leo ho nang le 4 [LAYER] QB's.

E Eketsang Layer Size
Ha ho hlokahale hore u khomarele boholo ba Layer ea mantlha (ka mekoallo) ka tšebetso ea APPEND. Haeba lintlha li bapaloa ka har'a li-beats tsa X (kamehla 3) ka mor'a loop, joale Layer Size e imena habeli (ea kamehla) kapa ea eketsoa. Ho bapalla Layer ea hau ea pele ehlile ho emisitsoe hantle 'me hangata ha ho sitise.

• Beha Lera hore o Tlalehe joalo ka holimo, hlokomela boholo ba pele ka har'a Bars. Beha ho 4 bakeng sa mohlala onaample.
• Tobetsa ho Layer:n ebe u tsamaisetsa ho APPEND ebe u tobetsa ho toggle letšoao la sehlomathiso. (+X)
• Tobetsa konopo ea "P" ho Bapala haeba e se e ntse e bapala 'me u qale ho bapala lintlha tse ling ho tsamaisana le morethetho joalo-joalo.

Hang ha pheletso ea mekoallo e 4 e fihla, tsoela pele ho bapala tsoelo-pele ea hau ho holisa boholo ho li-bar tse 8.

Kill Last - Layer Recorded: "Kill Last" e tla tlosa Layer ea ho qetela e Rekotiloeng e le hore u ka leka hape.

Tlosa Lera QB: Ke feela Layer QB ea ho qetela e ka tlosoang ka mabaka a totobetseng, kahoo ke eona feela Layer QB e nang le REMOVE. Layer QBs ka holimo ho eona e tla hlahisa ERASE ho fapana le hoo. Ho hlakola le ho tlosa ho tla hlakola memori e sebelisitsoeng.

Layer Solo & Mute: E ka 'na eaba u hlokometse SOLO & MUTE ha u ntse u bala LAYER QB ho li-examples? Ho tsoa ho QB pina eohle ea Layer e ka khutsisoa / ea soloha haeba ho hlokahala. Lenaneng la Lipapali, Litlhaku tsa Layer ka bomong li ka etsoa Soloed, kapa tsa khutsisoa, hammoho le pina kaofela. Solo e tla pele ho feta Mute.

Likarolo ho PlayList: Li-Layer li eketsoa ho PlayList e le Sub-Sequence moo Litlhaku tse fapaneng tsa Layer li ka tlosoang le Mehato ea Bar e phetoa hangata. Ho rekota ho Sub-Sequence ho tla eketsa Letere e ncha ea Layer sebakeng se nepahetseng. Fumana ka ho tšoara [LAYER n] QB le ho khetha Tatelano#. Tobetsa habeli kholomong ea BA ho eketsa mehato kapa ho hlophisa palo ea mekoallo ka mohato. Tsamaisetsa ka ho le letšehali ho grid ho hlophisa FX ea mohato. Ka bomalimabe, tse ling kaofela (Mohato oa FX, joalo-joalo) li ka holimo ho sebaka sa Quick-Start! Ka kopo, sheba Buka ea Mosebelisi.

Lentsoe ho Song Swing & FX…Ts'ebetso ea [: SONG FX:] Quick-Box SWING:nn e tla boela e fetole ho sisinyeha ha Layers (le TRAX haeba oache e le *2). Sena ke ho nolofatsa ho laola Swing ho tsoa phanele kapa tlhahiso ea CV le ho boloka lintho li utloahala li le ntle! Pina ea FX MIRROR, SCALE & LIMIT le eona e ka sebetsa ho Layers. TRANSPOSE:nn QB e sebetsa ho bohle

Ho bapala

Ho na le mefuta e 3 ea mantlha ea tatelano e lokelang ho bapaloa, li-trackers tsa TRAX, MIDI Layers, 'me ehlile Pina ea MIDI. E 'ngoe le e' ngoe e na le ho ikhetha le mefuta-futa ea eona ka tsela ea molumo, nako le FX. Ho qala tatelano ho bapala o hloka feela ho tobetsa konopo ea "P", empa, ho latela mohloli oa oache ea hau, sekhahla, le boemo ba pele, ho qala ho bapala tatellano ea fapana. Pina efe kapa efe ARMED Lenaneng la Lipapali e tla bapala empa lipina tse hlometseng ha li ntse li bapala li tla khutlela sebakeng sa tsona sa pele se hlometseng ka mor'a boemo ba Stop (Konopo kapa ho se na oache)

Ho kenya nako
Haeba u rata ho sebelisa lioache tsa nako tse 1/8, joale [CLOCK:/nn] QB e ka hlophisoa ho /1 kapa /2, empa haeba u na le lioache tse phahameng, u ka phahamisa likarohano ka nepo. Ho tobetsa konopo ea "P" ho se na oache ho tla u thusa ho Bapala. *Tlas'a [CLOCK:/n] QB e na le litlhophiso tsa BPM tse itšebetsang. CLKout Jack e tla hlahisa oache ena. Kamehla ke mohopolo o motle ho etsa liteko Bapala bakeng sa bara kapa tse peli hore Sequaralel e khone ho hokahanya, ho seng joalo lintlha tse 'maloa tsa pele li ka tlola ho fihlela sekhahla sa oache "e sa tsejoeng". Hang ha sete se tla loka letsatsi lohle!Haeba oache e tlosoa, Sequaralel e tla emisa. Oache efe kapa efe e tla qala ho bapala hape ho tloha qalong.Haeba o sebelisa oache e ka hare (boithati) joale BPM e tla beoa boemong ba ho qetela bo tsejoang ho tloha morerong kapa ho kenyelletsoa ha oache.Sekhahla sa oache ea motheo ea Sequarallel e nka nako ea lintlha tse 1/4, ke hore @/ 1, 500mS pulses = 120 BPM

Tlhahiso ea Clock
Haeba mohloli oa oache ea hau e le MIDI kapa Self clock (tlas'a [CLOCK:/1] QB) joale Clock Out e tla fana ka mohloli oa li-module tse ling. Leha ho le joalo, jack ena e ka hlophisoa hore e be CV.*Litlhophiso tsa CV I/O li tlas'a [MIDI PUSH] QB: CKO MODE:CLOCK OUT,CV IN, AUTO.

MIDI Clock vs. Clock in
Haeba u sebelisa oache ea MIDI (ke hore, ho hokahanya Sequarallel le DAW kapa MIDI hardware/sequencer), joale u nke qeto ea ho fetohela ho oache ea modular, lioache tse peli li lokela ho ba haufi haholo kapa ho tla ba le phetoho e kholo ho otla. Oache ea modular e tla laola hang ha ho lokisoa ho fihletsoe.

(Ho bapala) Pina ea MIDI

Ho Laela le ho Bapala Pina ea MIDI, tsamaisetsa ho [SONG:nn] Quick-Box, tobetsa, 'me u tsetse Pina# ho kenya. Tobetsa konopo ea "P" ho qala ho bapala. (kapa tšoara ho kena tlas'a [SONG: nn] 'me u tobetse habeli Lebitso la Pina ho kenya!) Haeba oache e ntse e kena ho Sequarallel, papali e tla qala palo e latelang ea "1" ka mor'a hore "P" e hatisoe. * Sequaralel e boloka tlaleho ea palo ea lioache leha e sa bapale, kahoo e tla lumellana hantle! Ho qala Pina ho bapala ka oache ea pele, tobetsa "P" ho letsoho ho bapala. Qala oache ea hau. Ho qala Pina ka oache ea MIDI, tobetsa "P" ho tšoara pele oache ea MIDI e qala. Bapala MIDI. Ho qala pina ka Oache e ka hare (tlasa [CLOCK:/1] QB) feela tobetsa konopo ea Play.Tobetsa konopo ea "S" ho emisa ho bapala.

Lipina Loops
Pina e ka aroloa ka li-loops tse 17. Sena se ka etsoa ho [LOOP: ON] Litlhophiso.

1. Tobetsa 'me u hatelle [LOOP: ON] QB ebe u tsamaisetsa tlase ho ea tlase → TŠOA HONA JOALE ho LOOP2:ADD LOOP:1 e tla bontša boholo ba lupu ka har'a mekoallo ho qala bareng 1
2. tobetsa LOOP: 2 ADD ho eketsa leqhubu pakeng tsa LOOP:1 le qetello le ho seta ho 5. Tobetsa konopo ea "P" ho bapala Joale LOOP: 1 SIZE e tla ba li-bar tse 4 (5-1=4). Ho bapala ho tla bapala loop e khethiloeng ho tlhahlobo ha ho khethoa.Ho [PLAYLIST], loops tsena li ka eketsoa e le li-blocks 'me tsa hlophisoa ka tatellano efe kapa efe tlasa pina ea "SO". Bakeng sa tse ling mabapi le PlayList bona karolo ea D ea karolo ena.

Pina ea FX
Loop/block e 'ngoe le e 'ngoe e ka ba le e 'ngoe ea liphetoho tse 17 tsa FX e abetsoeng ho eona e sebelisa [SONG FX] QB ha e ntse e bapala kapa e lla, kapa lenaneng la Libapala ka nako efe kapa efe. FX# e fanoeng ho tsoa ho [SONG FX] QB e tla fetoha FX# ea kamehla bakeng sa loop eo ha e buloa bakeng sa ho hlophisoa Lenaneng la Lipapali. Ka nako eo leha e le efe e 'ngoe FX # e ka abeloa ho thibela hoo e le hore FX e ka sebelisoa ka mokhoa o fapaneng. Sheba Karolo ea VA bakeng sa tse ling ho Song FX.

Seta bocha TRAX le/kapa Layer ka Song Loop Editing FX
Haeba u kenya lenane tlas'a [LOOP: ON] QB, kenyo e holimo ke SONG LOOP: xxx. Ha loop e ntse e tsoela pele, tsoelo-pele ea pina ea Pina ho PlayList e emisitsoe, empa lipina tsa TRAX le LAYER li ka khethoa ho etsa se tšoanang. Boemo bona ke "Bobeli" ka ho sa feleng ... ka lehlakoreng le leng, u kanna ua batla ho ts'oara Loop ea Pina ha lipina tse ling li ntse li tsoela pele. *Tlhokomeliso: Li-Layer Blocks li tla tšoarella Lethathamong la Lipapali, empa Layer Bar Step Sequencer e tla tsoela pele…

(Ho bapala) Tatelano ea TRAX Tracker

Li-trackers tse 5 tsa TRAX e 'ngoe le e 'ngoe e ka ba le tatellano e fihlang ho 8 e fapaneng ho e hlophisa ho PlayList. Ho fihla ho 5 tatellano e ka bapala hang. Tatelano ka 'ngoe e ka sebelisa mocha oa eona oa tlhahiso ea MIDI & LINK le tlhahiso ea Gate+CV kapa motsoako oa mela. Ho Tobetsa Habeli boloko ba TRAX ho PlayList ho tla e thusa ho Bapala E latelang. Ho nka hore TRAX QB e teng, tobetsa 'me u hatelle ho [TRAX:n] ho khetha tlhaku (TRAX tatelano) 'me u kenye grid ea tatellano ea litaba. * Tobetsa ho fetolela ho tse rapameng. Tsamaisetsa ka ho le letona ho kenya li-pop-up tsa QB.
Haeba tatelano ena e le ea pele (A) ea TRAX# ena, e tla bapala ha e ntse e le mohlophisi, ho sa tsotelehe hore ha e so be lethathamong la Playlist. Haeba e sa bapale, tsamaisetsa ho pop-up le tlase ho [SOLO+PL]. Bula:

Penya lekhetlo la pele: E tla Bapala feela hammoho le lipina tse ling ho PlayList. PlayList e tla tsoela pele.
Tlanya ea bobeli: Na Solo ena TRAX e le hore lipina tse ling kaofela li khutsitsoe
Tlanya ea boraro: E tla khutlela ts'ebetsong e tloaelehileng ea PlayList moo e neng e tla ba ka tloaelo.

Ho kenya li-block List List, tsamaisetsa ho [+PLIST+] 'me u tobetse bakeng sa boloko bo bong le bo bong boo u lakatsang ho bo kenya. Sena se tla theha sehlopha ka bosona haeba Lengolo le lecha. Tsena li ka kopanngoa le tatellano e meng ea nomoro ena ea TRAX ho PlayList Editor. Penya habeli ho sele ebe u khetha [++KENYA E NCHA++] kapa [+INSERT] kapa [-Tlosa]

Litlhophiso tsa TRAX
Tšoara khouto ho [:SETUP:] ho etsa Litlhophiso tsa Lengolo lena la TRAX. Ho bohlokoa ho etsa litlhophiso tsena ha u theha Lengolo la pele la TRAX (A) kaha Litlhaku tsohle tse latelang tse entsoeng li tla sebelisa litlhophiso tsena joalo ka kamehla. Ka mor'a moo, litlhophiso tsena li ka hlophisoa bakeng sa Tatelano ka 'ngoe. Mona ke tataiso ea ho Seta:

• BOHLOKO: Ena ke mohato oa pele oa tatellano. Sena se ka fetoloa ke PlayList FX.
• SIZE: Bona ke boholo ba tatellano ka mehato ho tloha ho 4 ho isa ho 64. Ka ho sa feleng ke mehato e 16.
• Oache: ea hae ke oache div/mult, ha e bapisoa le oache e kholo, ho tloha ho /96 ho isa ho *8. Oache ea kamehla ke *2
• MINIM BARS: Sena se beha bonyane ba li-bar (4 beats) tseo li tla bapala ho PlayList. Ea kamehla ke 1 Bar.
• MAXIM BARS: Sena se seta mekoallo e mengata e tla bapala pele e qala bocha. Ea kamehla ke MAHALA (ha e eo)
• CV GATE OUT: Khetha CV Row, kapa kaofela 4 bakeng sa Mehato e mengata ea litsela, kapa che. Ka tloaelo u tla batla ho beha e le
• VEL OUT: Row 1-4 bakeng sa TRAX# e le 'ngoe, empa haeba u sebelisa lane e le 'ngoe mohlomong mola o le mong o betere! CC 5&6 e tla ntša lintlha ho tsoa tseleng efe kapa efe (ho tloha ho le letšehali ho ea ho le letona) ka CC5=Heke, le CC6=CV. Sena se hlahisoa ho VEL Jack(s). Haeba u batla taolo ea lintlha tsa VCA, tloha VELOCITY. Beha ho Enfelopo: 1-4 ho hlahisa enfelopo e hlahisitsoeng ho lintlha tsena tsa TRAX.
  Beha ho None haeba u rera ho sebelisa tlhahiso ea VEL bakeng sa MIDI2CV kapa LFO Envelope joalo-joalo.
• MIDI OUT: Panel MIDI Channel eo TRAX e tla e sebelisa. 1-16, ha ho letho, kapa MPE Zone 1/2.
• LINK OUT: (1-4) Kopanya MIDI Channel eo TRAX e tla e sebelisa. 1-16, ha ho letho, kapa MPE Zone 1/2. (1-4)
• GLOBAL REC: Seteishene se sebelisitsoeng ho rekota ho li-trax tsohle tsa TRAX. 1-16 kapa Tsohle
• BRIDGE MAP SIZE le Bridge 'mapa: Bridging ke ho hokahanya Gates ha CV e ntse e fetoha. Boholo bo ka ba mehato e 3 ho isa ho mehato e 16. Mehato ea tatellano ea borokho e buloa/e tima ka ho khetha lebokose la mehato le ho le tobetsa. Mehato ea ho koala ha e na phello ho tlhahiso ea MIDI (lintlha tsa MIDI ha li khone ho koala)

TRAX Note-FX
Tlhokomeliso-FX ke li-modifiers tsa FX tse sebelisoang ho ntlha e 'ngoe le e' ngoe ho ama tsela eo molaetsa o tla bapala kapa o ama lintlha tse latelang le tatellano ka kakaretso. Ho na le ho fihla ho 8 Note-FX (1-8) ka Lengolo la TRAX. Ho kenyelletsa Note-FX ho lintlha ho na le mekhoa e 'meli:

• Tobetsa ho [FX*EDIT] QB ho pop-up. Sena se tla bonts'a FX#'s e abetsoeng lintlha. Penya habeli lintlha ho hlophisa.
• Tobetsa Hararo ntlheng efe kapa efe ho kenya litlhophiso tsa eona ebe u khetha FX#. U ka tlolela ho li-setting tsa FX le uena! Tobetsa ho [FX*EDIT] lekhetlo la bobeli ho bona lintlha ho grid empa ha u khethiloe (tobetsa habeli) ea bona
• Note-FX# e ka hlophisoa. Tobetsa [FX*EDIT] hape ho khutlela molemong oa ho hlophisa lintlha. * Sheba Karolo ea IV. B. bakeng sa ho teba haholoanyane sheba ho hlophisa ho TRAX Editor.

Ho fetola boholo ba Tatelano
Tatellano ea TRAX e ka etsoa boholo bo bocha ho sebelisoa [X2 SIZE], [BOTT:nn], le [SIZE:nn] pop-up QB's.

• [X2 SIZE] E tla habeli boholo ba tatellano ebe e kopitsa halofo e ka tlase ho halofo e ncha e kaholimo
• [BOTT:nn] Ena ke qalo ea tatellano. O ka fetola sena hore o fetole Play ea tatellano e hlahang.
• [SIZE:nn] Sena se beha boholo (ka mehato) ea tatellano. E ka boela ea sebelisoa ha u bapala. * Litlhophiso tsa Bott le Size li ka ikemela. Sheba Karolo ea VI. AutomationHo utloisisa hamolemo mesebetsi ea Edita ea TRAX Editor, bona Karolo ea IV. B. Ho hlophisa Tatelano ea TRAX

(Ho bapala) Mekhahlelo ea MIDI

Li-Layers tse Rekotiloeng tsa MIDI li tla beoa gridi ea PlayList joalo ka block. Sebaka sena se ka kopitsoa kae kapa kae ho PlayList ho etsa hore e sebelisoe hape. Ka mokhoa o ikhethileng, Layer # e sa tsoa thehoa e tla hlaha haufi le holimo ho PlayList, empa e le mong (eseng hang-hang ho latela block e 'ngoe). Maemo ha a na thuso ntle le haeba a le lethathamong le nang le Layer Sequence kapa lithibelo tse nang le maemo tse lumellang ho phalla ka har'a lisele tsa PlayList. Joalokaha ho boletsoe Karolong ea II. C. Layers on a Layer pina e theha Sub-Sequence ea ho fihla ho 8 Layers boloko bo bong. Sub-Sequence ena e ka fihlelleha ka ho penya habeli bolokong bo ka sehloohong ho PlayList le ho khetha LAYSEQ.

• # BR (:)(])0(j)CJ(l0C) # ke mohato oa Layer Sub-Sequence.
• 01 02 02 BR ke hore na ho na le libara tse kae mohatong ka mong. Sena se ka fetoloa
• 02 08 02 04 [A] – [H] ke litšiea tsa Lera ka leng le latellanang le entsoeng ho mohlophisi.
• 03 16 020408 Linomoro tse bonahalang tlas'a tsena ke Li-Layers tse tla bapaloa
• 04 .04 Nomoro e ho keriti e bontša boholo, ka mekoallo, ea Lengolo la Lera.
• 08 e supa Mekhahlelo e khutsitseng. Tobetsa ho toggle e 'ngoe le e 'ngoe ho bulela/tima.

Navigation ea Layer Sub-Sequence e tšoana le TRAX le PlayList. Tlanya e le 'ngoe feela e fetola tsela ea khesa e tšekaletseng kapa e otlolohileng, ha ho tobetsa habeli ho fetola boleng kapa ho fetola boemo.

• Ho theha Tsoelo-pele ea Sequencer
  Pele ho phetoho leha e le efe ka mor'a ho rekota Li-Layers ho grid ea Sequencer e tla lula Mohato oa # 1. Ho tobetsa habeli letšoao la "+" tlas'a "BR" ho tla eketsa mohato o mocha ka litlhaku tsohle tse fetileng tsa Layer.
• Ho Fetola Palo ea Bara (BR)
  Ka har'a sample ka holimo, mohato oa pele ke 2 feela mekoallo bolelele. Ka hona e tla bapala Layer [A] bakeng sa mekoallo ea 2 ebe e fetela mohatong oa 2. Mohato oa 2 o fetotsoe ho li-bars tse 8 (kaha kamehla e ka ba boholo ba Layer boholo, 2). Ka hona Layer [A] e tla bapala makhetlo a 4, ha Layer [B] e tla bapala habeli.
• Ho khutsisa Lengolo la Lera bakeng sa Mohato
  Tlas'a Layer Letters [A] ho ea ho [H], "-" e bontša hore ho na le Lera le khutsitseng. Sena se fana ka taolo ea ho tšesaane Li-Layers ho li-Layers kapa tse ling joalo ka ha litemana tsa lipina li etsa hangata. Mohato oa 4 o na le Li-Layers tse 2 tse khutsitseng ([A] le [C]) ha Mohato oa 1 o na le 3. Hang ha Lera le se le ngotsoe, le tla hlaha Mehatong eohle e sebetsang.
• Rekota "ka" Playing Layer Sub-Sequence
  Ha Layer e 'ngoe e rekotoa, Mehato eohle ea Sequencer e tla ba le Lengolo le lecha. Nako ea ho qala ho e rekota e ipapisitse le nako ea mohato oa hona joale, kahoo haeba mohato oa hona joale o le bolelele ba li-bar tse 8 empa u qalile ho bapala ka mor'a hore ho kene li-bar tse 4, mohato o tla bapala ka tsela e ts'oanang. Sena se rarolla bothata ba "qalo ea pele" eo hangata re kopanang le eona ha re rekota ho DAW, e qala pele ho sebaka sa Loop. Haeba ho rekota ho behiloe nako e telele ho feta palo ea Bar bakeng sa mohato ofe kapa ofe, palo eo ea bar e tla eketsoa ho phethahatsa boholo bo bocha ba ho rekota, kahoo ho eketsa bolelele ba kakaretso ea Tatelano. Lipalo tsa Bar li ka khutlisetsoa boleleleng ba pele empa tlhaku e latellanang ho grid e tla qala hape lengolo la Layer pele e qeta. Ho homola (ma) litlhaku tse latelang ho tla lumella tlhaku e telele ea Layer ho bapala ho fihlela qetellong kaha e ke ke ea qalisoa hape ke mohato o latelang.
• Tatelano ea Layer e Ncha
  Ho ka etsoa Tatelano ea Mehato e 4 ka Layer QB. Tatelano e ncha e eketsoa ha:
  • a) Ha ho na li-block tsa tatellano pina ena ea Layer
  • b) Tatelano efe kapa efe ea ho bapala e tlositsoe lihlomo (Boloko ba Tobetsa habeli 'me u se khethe ARMED) Litlhaku (A - H) li ka sebelisoa hape ka tatellano e meng. Tatelano e Ntjha le yona e ka ekeletswa Lethathamong la Dibapala ka ho tobetsa habedi selefounung e se nang letho, ebe o kgetha [+KENYA E NCHA+] ebe o tsamaisetsa ho kgetha nomoro ya Tatelano. Sena se tla amoha block block ea pele e neng e hlometse ebe e fa e ncha e le sepheo sa ho rekota.
• Litsela tsa MIDI
  Ka kamehla, Li-Layers li tla bapala ho MIDI Channel e le 'ngoe e rekotiloeng, kahoo likanale li ka feptjoa ho CV MODE ho hlahisa CV Row(s) ho latela khetho ea CV MIDI. Mola o felletseng ho Layer Sub-Sequencer o ka abeloa MIDI Channel e itseng ntle le ea mantlha bakeng sa Mohato oo feela. Ena ke e 'ngoe ea liphetoho ho Layer Step FX. Tsamaisetsa kholomong e ka letsohong le letšehali (mola o tla totobatsa) ebe o tobetsa habeli ho kenya FX menu. Sheba buka ea mosebelisi bakeng sa tse ling mabapi le FX ena.

(Ho Bapala) Lethathamo la Bapala

PlayList ea mantlha ea Sequarallel ke lebasetere lipakeng tsa li-tracker tsa mehleng ea khale le li-modifiers tsa sejoale-joale tse laoloang ke ketsahalo ka 'ngoe. E na le lipina tse fihlang ho tse 11 tsa li-block tse emelang Song Loops, Layers Sub-Sequencers, TRAX Sequences, le MIDI (+ MIDI Remote) Automations.

Li-blocks tsa ho Bapalla
Hang ha u hlometse ho bapala, pina e tla bapala 'me e tsoele pele mohatong o latelang haeba e le teng, kapa e khutlele karolong e ka holimo ea sehlopha seo. Letoto la li-blocks li tla bapala le ho loop ha block e se nang letho ho grid e arola sehlopha se seng sa li-block. Joale mosebelisi a ka hlomella lihlopha tse fapaneng ka nako e le 'ngoe kapa ka pina e le' ngoe ho ba le taolo e felletseng holim'a motsoako oa ho qetela.
Ho penya habeli bolokong kapa ka holim'a eona sebakeng se se nang letho ho tla thusa boloko boo ho bapala ha boloko bo fetileng bo fela. Mokhoa ona o netefatsa ho lumellana le bonolo ho laola hore na grid e bapala joang. Sehlopha sa li-blocks se ka hlomella ho bapala kae kapa kae sehlopheng seo. Sena se bonts'oa ka lithapo tse benyang tse pota-potileng boloko Haeba ho na le sele e se nang letho ka har'a marang-rang kaofela, ho penya habeli kholomong ea Mohato # ho tla thusa lihlopha tsohle tse ka tlase ho eona. Ka lebaka lena ho bohlokoa ho boloka sebaka pakeng tsa lihlopha haeba u rera ho hlomela ka tsela ena. Ka lehlakoreng le leng, ho penya habeli mohatong ofe kapa ofe kholomong e ka ho le letšehali ho tla thusa bohle ba e thulaneng le mohato oo. Leha ho le joalo, li-blocks tsa ho qetela tse hlometseng li tla hopoloa, 'me morero o tla bapala ho tloha lintlheng tseo ha e tobetsa konopo ea "P". Sena se boetse se bolokiloe ka morero.
*Hlokomela: Li-blocks tse hlometseng nakong ea papali li ke ke tsa "hopoloa" ka mor'a ho emisa, li-block tsa pele tse hlometseng li tla boela li hlome.

Ho eketsa Blocks
Ho kenya block pina efe kapa efe, tlanya habeli ho Cell e se nang letho eo u batlang ho e kenya 'me ho tsoa pop-up khetha ADD/NEW ho khutlela gridi. Tsamaisetsa ho khetha lengolo la block/nomoro eo u lakatsang ho e eketsa. Sebaka se secha se ka etsoa haeba ho na le leha e le efe e setseng e butsoe, ke hore, Haeba ho ne ho e-na le TRAX [A] le [B] u ka tsamaisetsa ho [C]. Hang ha block eo u e batlang e fumanoe, tobetsa ho e kenya ka har'a grid. Lipina tsa TRAX li tla bonts'a ka tsela e fapaneng ha u ntse u tsamaisetsa boloko, ke hore, TRAX e tla bonts'a moralo o monyane oa tatellano ka fensetere e haufi. Haeba u ka feta lengolo le latelang le bulehileng la TRAX, u tla bona thepa e tsoang linaheng tse ling ho tsoa ho Merero e meng ea lipina le TRAX. Ena ke tsela e ntle ea ho kopitsa TRAX ho tloha pina e 'ngoe ho ea ho e' ngoe hape.

Solo, Bulisa, 'me Rekota
Khetha pina moleng ofe kapa ofe ebe o tobetsa habeli bakeng sa po-up. Tsamaisetsa ho Solo, Mute, kapa Record ebe o tobetsa ho sebelisa. Bakeng sa boiketlo, Looping e ka buloa/e tima ka tsela ena ho tsoa kae kapa kae ho grid.

Li-blocks tse tsoang kantle ho naha
TRAX e na le bokhoni ba ho reka thepa ho tsoa ho morero o mong oa Pina. Tobetsa habeli TRAX Block Letter kapa cell cell ebe u khetha [++KENYA E NCHA++] ho tsamaisetsa tlhakung e ncha eo u batlang ho kenya tatellano ho eona. Tobetsa ho tsoa. Penya habeli Lengolo le lecha ebe u tsamaisetsa ho feta Lengolo le ka holimo.Ha u ntse u phetla, fensetere e nyenyane e tla bontša marang-rang a TRAX, empa le Pina# le TRAX# li tla bonahala. Haeba e Bapala, TRAX e tla hlomella boloko bona le ho e hlahloba hang ha boloko bo fetileng bo qeta ho bapala. Tobetsa ho phethela ha u se u entse qeto ea tatellano.

Bongata Copy/Paste
Li-blocks tse 'maloa kapa tse ngata li ka kopitsoa le ho beoa sebakeng se secha ka har'a gridi e le strip kapa sebaka. Tobetsa habeli hukung e kaholimo ho leqele la sebaka sa hau sa kopi seo u reriloeng ho sona, ebe u "hula" boloko ka ho le letona le/kapa tlase (tobetsa ho fetola tsela e rapameng/e theohileng) konopong e ka ho le letona. Penya habeli ho kopitsa sebaka. Ho peista, tsamaisetsa holimo/tlase ho seo e tla ba sekhutlo se kaholimo ho le letšehali. Sebaka se secha se tla khanya empa se ka fokotsoa ho ea holimo kapa ho ea holimo bakeng sa pente. Penya habeli ho peista. *Ela hloko hore lisele tse neng li lula li tla ngoloa ka li-blocks tse ncha, empa eseng li-blocks tse se nang letho. Hlakola Tlosa 'me u Kenye Li-blocks Tobetsa habeli k'honeng e kaholimo ho le letšehali sebakeng sa ho hlakola joalo ka Kopi e kaholimo. Kgetha HLAKOLA, TLOSA (fetola tsohle ka tlase ho yona) kapa INSERT ho etsa kopo. TLATSA: nn e ka hlophisoa ho li-blocks tse ngata ka nako e le 'ngoe.

Li-blocks tse nang le maemo
Tobetsa habeli sele efe kapa efe ho bula pop-up ebe o tsamaisetsa ho [+ADD COND] ebe o tobetsa. Lenaneo la maemo le a bula. Sena se tla eketsa thibelo e nang le maemo moo o ka behang nako (ka mekoallo) kapa oa tsoa maemong a itseng joalo ka ho hata pina e 'ngoe, reset pulse (haeba MIDI e sa sebelisoe), kapa pulse ea kantle ho CC5, CC6, kapa jack ea kantle.

PLFX (Lenane la ho bapala FX) & Thibela Transpose
Li-blockList tsa PlayList li ka ba le Liphetoho tsa tsona tsa lefats'e tsa FX! Ka kopo bona buka ea mosebelisi bakeng sa lintlha tse ling ho PLFX. Li-block le tsona li ka ba le +/- 12 transpose setting: tobetsa habeli ebe u khetha [TRANSPOSE] ho pop-up.

Ho lokisa

Sequarallel e na le matla a seng makae a ho hlophisa, haholo-holo ho TRAX, 'me Layer Sub-Sequence e se e koahetsoe Karolong ea IV. C, kahoo karolo ena e tla akaretsa TRAX Editor, Song & Loop Marker Editor, le Bahlophisi ba Envelope.

(Editing) Pina ea MIDI
Joalo ka selelekela, Pina ea 'nete e Rekotiloeng e ke ke ea hlophisoa ka kotloloho kaha seo se ka eketsa ho rarahana ha mojule le ho nka hore pina e tla be e fetotsoe ho DAW pele e rekotoa. Ho sebelisa SongFX le hoja e le eona ntho e latelang e molemo ka ho fetisisa (e molemo?)! Sheba Karolo ea VA Song FX. Li-Loop Markers tsa Pina Ho na le mekhoa e 2 ea ho eketsa

Lipina Loop Markers 

• Kenya "Special" Note 121 mohloling ho DAW ho Bars eo u batlang ho ba loop e qala
• Theha / hlophisa lethathamo la Lits'oants'o tlasa [LOOP:ON] QB:

Kenya Li-Markers ho DAW
Haeba u thehile Pina ka tatellano ea DAW MIDI, ena ke tsela e ntle ea ho kenya matšoao Pina. Kenya Ntlha ea #121 (C#10) sebakeng se seng le se seng seo u batlang ho Loop ho sona, ho fihla ho 16, ho Channel efe kapa efe. Ke tagged nakong ea Record.

Kenya Lits'oants'o ka Lethathamo la Lits'oants'o

1. Tsamaisetsa ho [LOOP:ON] QB skrineng se seholo 'me u hatelle encoder ho kenya Litlhophiso tsa Loop
2. Tsamaisetsa tlase ho LOOP: 1 ADD (kapa haeba matšoao a se a ntse a le teng LOOP:nn ADD:)
3. Tobetsa "P" ho qala ho bapala le ho hlahloba lipina tsa lipina. Ho tsamaisa nomoro ho tla qala papali ho tloha ntlheng eo
4. Tobetsa ho boloka le ho Tsamaisetsa fatše e le 'ngoe ho kenya Loop Marker e latelang. Ela hloko SIZE:n boleng (ka mekoallong)

Loops efe kapa efe e ncha e kenyellelitsoeng e tla ba le kopi ea SongFX e kentsoeng ho loop ea pele kapa e fetileng, kahoo ke mohopolo o motle ho beha Pina ea hau ea FX pele. Li-loops tse kentsoeng ka mor'a ADD ea pele li tla lekana ka boholo.

Kenya Matshwao ka hara lenane

1. Tsamaisetsa ho INSERT MARKERS ebe o tobetsa ho bulela.
2. Tsamaisetsa tlase moo o batlang ho kenya lesupa ebe o tobetsa

Masupa ohle a tla theola e le 'ngoe 'me boholo ba lesupa leo u le tobetseng bo tla aroloa ka ho lekana le le lecha.

Hlakola Lits'oants'o Lenaneng

1. Tsamaisetsa ho: DELETE MARKERS ebe o tobetsa ho bulela
2. Tsamaisetsa tlase ho lesupa leo u batlang ho le hlakola

Matshwao ohle a latelang a tla suthisetsa le leng. Boholo ba lesupa le khethiloeng bo eketsoa saeseng ea e hlakotsoeng.

Hlakola Li-Loop Markers Tsohle (ho qala bocha)
Tsamaisetsa ho DELETE:ALL: SONGFX ebe o tobetsa. Tlhokomeliso: Sena se tla khutlisetsa Pina ho lupu e le 'ngoe. Tsohle SongFX le tsona li tla hlakoloa.

Liletsa tsa Pina
Haeba Pina e le GM-MIDI ho tla ba le lethathamo la liletsa tse sebelisoang ke Pina tlas'a [MIDI PUSH] QB. Tsena li behiloe ka nako ea rekoto e le hore li ka fetoloa le ho bolokoa.

Mecha ea lipina / Lebitso: Tlas'a [SONG:nn] QB ho na le pontšo ea Likanale tse sebelisoang ke Pina. Tsena li ka holofala mona, empa ka matla le ho feta ka Song FX. Ho boetse ho na le mokhoa oa ho reha Song Project + load Songs ka mabitso. Tobetsa feela Pina eo u batlang ho e reha lebitso hape, tsamaisetsa lengolong ebe o tobetsa ho e hlophisa, tobetsa ho tsoa ho e 'ngoe. Ho tsoa le ho boloka Lebitso la Pina, tsamaisa ho tloha ho lebitso ho ea letsohong le letona ho feta pheletsong ea skrini.

Pina ea FX
Mokhoa o bonolo le o monate oa ho qhekella Pina, hang ha Loops e se e lokisitsoe, ke [: SONG FX:] QB. Karolo ena e lumella ho qhekella ha lipina tsa lipina ka bongata, 'me e ka ba le liphetho tse makatsang ka potlako. E 'ngoe le e 'ngoe ea lipina tse 16 tsa Pina ea FX e na le li-sequencer tsa eona tsa ka hare tsa mask (16) tse nang le mefuta e fapaneng ea liphetoho ho FX e behiloeng ho QB drop-down. Li tsamaisana hantle le li-Loops tse entsoeng, empa li ka sebelisoa ka mokhoa o fapaneng ke pina efe kapa efe ea Loop. Sheba Karolo ea VA Song FX bakeng sa tse ling.

(Ho hlophisa) Tatelano ea TRAX Tracker
Li-trackers tsa TRAX ke tsona tse "tšoanang le li-modular" tse latellanang ka ho fetisisa ho Sequaralel. Ho na le li-trackers tse 5 tsa mantlha tse ka bapalang ka nako e le 'ngoe,' me e 'ngoe le e' ngoe e na le tatellano e 8 e lokelang ho khethoa le ho sebelisoa ho PlayList. E 'ngoe le e' ngoe ea ba 40 e na le li-bundle tsa eona tsa NoteFx (8 e 'ngoe le e' ngoe) le Litlhophiso. Ha Lengolo le lecha la TRAX le etsoa, ​​Litlhophiso li kopitsoa ka har'a [TRAX:n] QB e tšoanang. Ho theoha ha TRAX QB (ka skrineng se seholo) ho na le litlhophiso tse bonolo tsa ho fihlella lebokose le leng le le leng ha u tobetse:

• TRX SOLO Ho etsa tatellano e le 'ngoe ka har'a TRAX QB ena
• TRX MUTE Ho khutsisa tatellano eohle ka har'a TRAX QB ena
• LEVELS: - Ho beha moeli oa lebelo ka kakaretso bakeng sa TRAX QB ena
• SWING+/-nn Ho seta swing bakeng sa TRAX QB ena. (E na le lethathamo, sheba TRAX Editor leq. 15)
• MIRROR:nn Beha ntlha ea Seipone sa Tlhokomeliso bakeng sa tatelano eohle ho TRAX QB ena (*E na le litlhophiso)
• SEKALE:xx Kgetha Scale Maj/min/Maj7/min7 kapa Mosebedisi 1-4 e ka hlophiswang tlasa SCALE:xx QB.
• LIMIT:>/
• TRANS:+00 Beha boleng ba transpose bakeng sa TRAX QB ena.
• -RECORD- Bulela / tima mokhoa oa ho rekota oa TRAX bakeng sa tatellano eohle ho TRAX QB ena. Litlhophiso tlasa QB ena.
• TRX ERASE Ho hlakile hore ho bapala tatelano ho TRAX QB ena (e bontšitsoeng haeba e se ea ho qetela TRAX)
• HLAKOLA: (Ho qetela TRAX QB) E tlosa TRAX QB ena ebe e hlakola tatellano ea eona kaofela.
• TSOA: Tsoa ha TRAX QB e theoha. *E ka tsoa ho TRAX: EDIT ka holimo le eona!

Kenya TRAX Editor
Ho fihlella li-tracker bakeng sa ho hlophisoa, tobetsa 'me u tšoare [TRAX:n] QB, e tla bontša [TRAX EDIT]. Khetha Tlhaku ea Sequencer [A] [B] joalo-joalo, ho kenya Tatelano, kapa:

FETSA LEBITSO Bulela ho fetola (ma) mabitso a tatellano ka tsela e latelang

1. Tobetsa Lebitsong la Lengolo la TRAX leo u batlang ho le hlophisa ebe u totobatsa lengolo leo u lokelang ho le hlophisa
2. Tobetsa ho edita tlhaku ya lebitso, tsamaisetsa hodimo/tlase
3. Tobetsa ho hlophisa tlhaku e 'ngoe, joalo-joalo
4. Tsoa 'me U boloke lebitso ka ho phenya lebitsong ho feta qetellong ea skrine

Hopola ho tima EDIT NAME ho kenya TRAX Editor

• TRAX ADD? Kenya lengolo le lecha la tatellano e se nang letho. Litlhophiso li kopitsoe ho tsoa ho tse fetileng.
• KOPIA HO TLOHA Sena ke ho kopanya tatelano e le 'ngoe ea TRAX ho e 'ngoe. Tatelano e ncha e ka etsoa, ​​kapa e seng e ntse e le teng ea ngoloa. Khetha Lengolo la mohloli, ebe moo u eang teng.

Lintlha tsa Lehlakoreng

• TRAX Scale vs. SongFX Scale:
  the 4 TRAX User Scales (ho TRAX QB drop-down) e ikhetha ho TRAX Trackers. Likala tsa Song FX li ka kopitsoa ho TRAX ha li ratoa (tlas'a [SCALE:xxx] QB ) empa SongFX e ka boela ea sebelisa sekala sa eona ho TRAX, Layers, kapa ka bobeli tse feto-fetohang haholoanyane.
• TRAX Swing:
  Setlhophiso sena sa swing se eketsa kapa se fokotsa ho setaele sa SongFX swing. Hobane TRAX ha ea tlameha ho ts'oaroa ho x2 (default) liphetho li tla fapana, kapa li be monate. TRAXswing e ea lehlakoreng le lebe hape. The SongFX swing→TRAX swing / nulling relationship ha e na moeli. Tlas'a TRAX Swing QB ho na le sub-sequencer ea boholo bo fapaneng e ka patang ho sisinyeha ka mehato e itseng, e hlahlobe!
• Seipone sa TRAX le Transpose:
  Tsena li ka fetola ka ho feletseng mololi oa tatellano empa hape li tla fetola Meropa (e! mocha oa meropa ha oa thijoa mona!) kahoo o ka fetola molumo oa 'mino habonolo ka litsela tse ncha le tse makatsang. Tsena li ka laoloa ka PLFX kapa tsa abeloa ho laoloa hole le li-CC kapa Lintlha. Tlas'a Seipone QB, motho a ka beha Meeli e Tlaase le e Phahameng ho Mirroring ea lintlha. Sheba Buka ea Mosebelisi bakeng sa ho sheba ka botebo ho Mirroring.

Mohlophisi oa TRAX

Mohlophisi oa TRAX a ka tatellana mehato e fihlang ho 64 ka litselana tse 4 tsa lintlha ka mohato. Ka mokhoa o loketseng, sena se lumellana le mela e 4 ea li-jack tse phaneleng, tse ka abeloang ho [SETUP] QB ho pop-up. Ntlha ea pele, ho senyeha ka potlako ha marang-rang a TRAX sequencer.Kholomo ea pele, e nang le likhutlo tse nyane, e bonts'a potoloho ea mask ea Note-FX.
Linomoro tse haufi le moo ke Mehato. Mehato e 8 e ka bonts'a hang. Tse 4 tse latelang ke lintlha ka litsela tse 4. Ka holimo (e sa bontšoang mona) u tla bona Sehlooho “NOTE1 NOTE 2 NOTE 3 NOTE4”. E boetse e bitsoa litselana. Lintlha li hlahisoa e le Nomoro ea khale le nomoro ea Octave, empa haeba u tloaetse boleng ba HEX, sena se ka fetoloa ka har'a [SETTINGS]. Ho tsamaisa marang-rang ho tšoana le ha u le Lenaneng la Lipapali moo tataiso ea cursor ea Horizontal le ea Wema e fetoloang ka ho penya sekhoudara. Ho tsamaisetsa kholomong ea linomoro tsa Mohato ho tla lumella mola oohle hore o khethoe hang.

Ho eketsa molaetsa
Tobetsa habeli kae kapa kae ho marang-rang 'me u tsamaise lintlha. Haeba e sa bapale, molaetsa, joale lintlha tse ling mohatong, li tla utluoa ha u khetha. Tobetsa ho tsoa le ho seta noutu. Ho fetisetsa holimo/tlase lintlha tsohle tse teng mohatong o le mong, tsamaisetsa kholumong ea Step# ebe o tobetsa habeli, o tsamaise. Ho lokisa noutu Tsela e bonolo ea ho fihlella litlhophiso tsa mantlha tsa noutu ke ho e penya hararo. Ho tla buloa menu e nang le lintlha tse latelang:

• ELA HLOKO: nn Ena ke nomoro ea lintlha tsa MIDI ke hore C3=36
• VELOCITY: nn Sena se beha lebelo la Note. E boetse e bitsoa Boemo ba Tlhokomeliso.
• tieho:0:nn Sena se beha tieho ea lintlha ho 24th ea ho otla ho 2 ticks resolution (ho 24PPQN)
• BOLELELE:n: nn Sena se beha bolelele ba lintlha ho liboseleise. 0:24 ke mohato o le mong o felletseng. 8:00 ke mehato e 8 ka bolelele.
• FX SEL: Sena se khetha banka ea NoteFX ho e sebelisa bakeng sa lengolo. 0 = ha ho letho.
• FX: EDIT> o tlolela FX*EDIT haeba FX SEL e se 0. Sheba Karolo ea VB bakeng sa lintlha tse mabapi le Note-FX

Tšoara encoder ho tsoa, ​​joalo ka lenane kapa lenane lefe kapa lefe

Fesetere ea Pop-Up
Ho na le mokhoa o bonolo oa lefats'e oa ho Fetola litekanyo tsa mantlha tsa lintlha ho pop-up. Ho tsamaisetsa ka ho le letona, ho feta lane ea 4 ho tla bula fensetere ea pop-up e nang le lisebelisoa tsa ho hlophisa, le lintlafatso ho thusa ho theha tatellano. Li-QB tsena ke: - Bahlophisi ba Tatelano– KOPI Bulela ho Kopitsa sebaka sa marang-rang. E boetse e theha bekapo ea Recall (etsolla) ~ Hang ha Kopi e se e phethiloe, phetoho ena ho PASTE e boetse e khantšitsoe haholo. (Sheba ka tlase)

• SKIP:n Seta Tlatsa ho tlola mohato o mong le o mong oa 2, oa 3, oa 4 o khantšitsoe. E sebetsa le li-adjuster tsohle, Copy/Paste
• TLATSA nn Khetha palo ea mehato eo u lokelang ho e lokisa hang-hang. Tsoela pele ka ho iketsa Copy/Paste.
• SHIFT+ - E fetola litselana tsohle kapa tsela e le 'ngoe (ho feta ho tlatsa / Tlola mefuta kapa tatellano eohle) holimo / tlase ~
• Hlakola E hlakola lintlha ho grid. E ka sebelisoa le FILL le SKIP. ~
• SEKALE: RANDOM:n E sebelisa Sekala se khethiloeng ho lintlha tse bonesitsoeng holim'a marang-rang ka Lane 1 joalo ka Root ~
• DELAYER LENGTH: E sebelisa chelete ea Randomization ho lintlha tse khethiloeng ho grid ~
• MAEMO: Tobetsa ho bontša/ho hlophisa tieho eohle ea Lintlha. Tobetsa hape ho pata Ho lieha ntle le haeba lintlha li khethiloe ~
• FX*EDIT Tobetsa ho bonts'a/edita bolelele bohle ba Lintlha, tobetsa hape ho pata bolelele ntle le haeba lintlha li khethiloe
• X2 SIZE BOTT:nn Tobetsa ho bontša/ho fetola maemo ohle a lintlha, tobetsa hape ho pata maemo ntle le haeba ho khethiloe molaetsa. ~
• SIZE:nn Tobetsa ho bontša/ho hlophisa lintlha tsohle NoteFX#~

Litlhophiso tsa Sequencer-

• RECORD- Tobetsa ho bulela / tima mosebetsi oa Rekoto bakeng sa ho rekota lintlha le li-control tsa Remote CC
• X2 SIZETobetsa ho habeli boholo ba tatellano le ho pheta halofo e ka tlase ho halofo e holimo.
• BOTT: nn SIZE:nnSets Qala (tlase) Mohato oa Tatelano.
• SOLO + PL Tobetsa ho notlela TRAX Play ho Lengolo lena la Tatelano. Tobetsa hape ho Solo tatelano ena
• +PLIST+: Tobetsa ho habeli boholo ba tatellano le ho pheta halofo e ka tlase ho halofo e holimo.
• SETUP: Tobetsa o hatelle ho kenya Setup Menu bakeng sa Lengolo lena la Tatelano ya TRAX (sheba leqephe le latelang)
• KHOPOTSO: Tobetsa ho Hopola tatelano ho boemo ba ho kena kapa boemo ba ho qetela ba COPY.
• TSOA: Tlohela ho Tsoa TRAX Editor. Ho ts'oara encoder kae kapa kae ho grid ho boetse ho tsoa.

E ka sebelisoa le FILL le SKIP
(VI.B. TRAX Tracker. Ho hlophisa.. ho tsoela pele)

LEKALA: Tsamaisetsa → hantle ka har'a marang-rang ho ea pop-up ea QB le tlase ho [SCALE:] ho fumana phetohelo ea 4 TRAX User Scales: TRANSPOSE:+nn Khetha +/- note offset bakeng sa TRAX QB COPY HO TSOA PENG EA FX: Kopitsa Tsohle Maemo a Basebelisi ho tsoa ho Pina ea FX:1-16 SAKALE EDIT:n Khetha Sekala sa Mosebelisi ho se edita [C][D][E] . . . Fetolela linoto tsa keyboard ho li kenyelletsa ka tekanyo

TLHOPHISO:
Tsamaisetsa ka har'a grid ho ea pop-up ea QB le tlase ho [:SETUP:] ho fihlella litlhophiso tsa Global tsa nomoro ea TRAX le litlhophiso tse ikhethang tsa Lengolo la TRAX. Tobetsa o hatelle ho kenya lenane. Sheba Karolo ea III. B (Ho bapala TRAX Tracker Sequence) bakeng sa ho pheta-pheta ho TRAX Setup.

SOLO+PL
Joalokaha ho boletsoe ka holimo, ho tobetsa ha pele ho tla emisa tsoelo-pele ea lipina tsohle tse Lenaneng la Lipapali joalo ka ha [LOOP:ON] QB skrineng se seholo. Sena se bohlokoa ha o hlophisa Tatelano e seng e ntse e le lethathamong la Lipina le ba bang, ho fapana le ho emela hore tatellano ena e bapaloe. Sesupa se tsamaisang Mehato se tla bontša hore pontšo ea Lengolo la TRAX ho mohlophisi e ntse e bapala. Ho tobetsa [SOLO+PL] lekhetlo la bobeli e tla ba TRAX# le Lengolo feela. Ho tobetsa khetlo la boraro ho tla khutlisetsa papali ho tloaelehileng.

SETS'OA MATS'OA ([SWING +/-nn]) Swing Mask ho TRAX ke mokhoa oa "ho nolofatsa" molumo oa mochine oa tatellano ea tracker le ho etsa hore e utloahale ho feta motho. E sebetsa hantle haholo ho melumo ea percussive kaha phapang e bonahala haholoanyane. Ha 'Mapa o pata mohato oa tracker ho tloha ho swing, boleng ba swing bo hlokomolohuoa e le hore mohato oo ha o na swing. Ha swing e le ka lehlakoreng le fosahetseng, maqhubu a khutlela morao. TRAX swing e sebetsa feela ho li-multiples Clock (ke hore, Clock x 2, x 4) hobane e sebelisa nako ea ho atisa nako ho e-na le nako ea nako ea ho kenya e lulang e sa fetohe, ka hona, ha e fetohe. Ho fihlella 'Mapa oa Swing, khetha [TRAX:n] QB ho tsoa skrineng se seholo, tsamaisetsa ho [SWING+/-nn] 'me u hatelle. Lenane lena le teng mona joalokaha le sebetsa ho Mangolo ohle a TRAX ena. Tšobotsi e ikhethang ea mehato ea masking swing e nang le tatellano e nyenyane e etsa hore sena e be tlatsetso e molemo ho arsenal ea TRAX.

• AFFIX TO SONG E: TRAX ena le eona e tla "tsutsuoa" ke tlhophiso ea Song Loop's Swing.
• FX: SWING:+/-nn Swing e ka hlophisoa mona joalo ka QB
• SWING MAP SIZE:nn Fetola Boholo ba tatellano ea mask
• [1][2][3] ... [15][16] Toggle Swing e nolofalletsa mehato ho bula/ho tima

(Editing) Enfelopo
Morero o mong le o mong oa Pina o ka lula ho liforomo tse 4 tsa maqhubu a enfelopo. Liphetoho tsena tsa maqhubu li ka hlahisoa ke liketsahalo tsa PlayList, Beats, Bars, Loops, Sequencer Notes, liteishene tsa MIDI, kapa ho sebetsa ka bolokolohi joalo ka LFO. Li-waveforms li ka fetisetsoa ho liphetho tsa CV (CC1 ho CC6) kapa MIDI CC / PW / AT efe kapa efe ho liteishene tse abetsoeng, ka kotloloho kapa leha e le liteishene tse khethiloeng tsa CV MODE. Ho na le mefuta e 3 ea li-envelopes:

• ADSR: AHDSR ka ho lieha) feela ka lehlakoreng le letle ho li-filters tsa enfelopo kapa taolo ea VCA
  CV DRAW: Sehatisi sa Waveform ka ho kenya CV CC 5 hore se sebelisoe joalo ka sebopeho se hlahisitsoeng kapa LFO.
• PARAMETER: Sesebelisoa sa ho theha parametric bakeng sa libopeho tsa wave tse sebetsang ka ho kenya boleng.

Lebokose le Potlakileng la Enfelopo
Ka mokhoa oa kamehla, Envelope QB e ka fumanoa tlas'a [TUNE:+nn] QB pele ho Layers le TRAX. Tobetsa [ENVELOPE] QB ho bula karolo e theohang ho khetha bahlophisi ba fapaneng ha khouto e emisitsoe. A Quad view lienfelopong tsohle tse 4 li tla hlaha. Tsamaisetsa ho khetha le ho kenya sehlophisi seo u se khethileng.

• ENV SIZE: n:nn Beha nako ea Enfelopo ka Li-Ticks (1/24th quarter note @ 24PPQN)
• RIGGER: xxxxx Beha mohloli oa mohloli: Ha ho letho, PlayList block, Bars, Beat, Clock, MIDI Channel 1-16,
• CV MODE (lintlha tsa seteishene), Matha Mahala (LFO)
• V OUTPUT:xxxx Beha tlhahiso ea kamehla ea Envelope: Ha ho letho, CV MODE (VEL jacks), CV Outputs CC1 to CC6
• IDI OUT:xxxxx Beha MIDI Output Type: NO, CC#0-127, Pitch Bend, After Touch [1] [2] … [15] [16] Khetha likanale tsa MIDI bakeng sa MIDI OUT. Khetha / sutumetsa ho bulela/ho tima
• ADSR EDIT: Theha sebopeho sa AHDSR Envelope u sebelisa lipalo le li-curve. Likonopo tsa Editing ke:
  • [POLE] Tobetsa ho khetha Pole ho e tsamaisa. Qala | Tlhaselo | Tšoara | Ho bola | Ntlafatsa (H) | Lokolla
  • Tobetsa ho Tsamaisa Pole. Tobetsa ho tsoa ho likonopo tse kaholimo ho hlooho.
  • [CURV] Tobetsa ho khetha Curve ho lokisa. Tlhaselo | Ho bola | Lokolla
  • [SET ] Tobetsa ho Romela Enfelopo ka diphetho tse hlalositsweng ho [ENVELOPE] di-setting (ka hodimo) [EXIT] Tsoa 'me u khutlele skrineng se seholo.
• Setšoantšo sa CV: Sebelisa CV Input ho CC6 ho taka sebopeho sa maqhubu. Likonopo tsa Editing ke:
• [TRIM] E theola sebopeho sa wave ho thella hantle joalo ka leqhubu la LFO. Nako e ntse e tšoana.
• [UNDO] Hopola sebopeho sa ho qetela se hapiloeng mohopolong oa nakoana haeba sephetho sa TRIM se sa batlehe.
• [REC] urn On kamehla Record CV. Tobetsa hape ho boloka skrine e felletseng ea ho qetela e rekotiloeng.
• [EXIT] Tsoa 'me u khutlele skrineng se seholo
• PARAMETER: Theha waveform bakeng sa Enfelopo kapa LFO u sebelisa li-parameter tse khethiloeng le ho tsamaisetsa holimo/tlaase. Litaolo tsena li nchafalitsoe 'me boleng ba tokiso bo ntse bo le teng bo koahetsoeng:
• FREQUENCY:nnn Leqhubu la mohato ho qala leqhubu la pele la sine ho tloha ho 0 ho ea ho likhato tse 358
• AMPLITUDE:nnn Fetola leqhubu la mantlha la sine ho tloha ho 1/2 cycle ho ea ho tse 9
• OFFSET:nn Fetola rampho ba le makgetlo a ho ya hodimo kapa tlase. Negative lehlakore tla thatela.
• OFFSET RAMP:nnn E fetola kakaretso ea waveform offset -50 ho +50 (ho tloha tlase ho ea holimo, 0 = centered) E fetola offset ho phahamisa waveform kapa ho boloka li-bottoms esita le kapa ho khaola. -127 ho
• WAVE STEP:nnn E fetola "thibelo" ea waveform bakeng sa phello ea glissando kapa tatellano ea CV. 0 ho ea ho 255.
• MIX MULT BY:nn Beha Multiple of Sine wave hore e kopane le ea mantlha. 0 = theoha, 1X ho 127X
• MIX LEVEL: nnn Beha Boemo ba Sine wave Mix. -127 ho ea ho +127, 0=theoha. Mokhahlelo o fosahetseng oa ho khelosa
• WAVE FUZZ:nn Beha fuzz e sa reroang ho sebopeho sa wave. 0 ho isa ho 50 (hoo e ka bang +/- 12%)
• BI-POLAR: YES Khetha bakeng sa bi-polar +/-5 Volts, kapa NO bakeng sa 0 ho 5V feela ho beha 0V tlase skrineng.
• TRIM E fokotsa sebopeho sa wave ho loop hantle joalo ka LFO. Ho etsolla, fetola feela parameter efe kapa efe.
• TSOA: Tsoa / boloka sebopeho sena sa maqhubu

Mofuta ofe kapa ofe oa maqhubu o ka hlophisoa joalo ka LFO, kapa oa hlohlelletsoa ke lintlha kapa liketsahalo, 'me o na le nako e fapaneng e ipapisitseng le BPM ea hajoale (ho fihla ho li-beats tse 8) kahoo e ka hokahanngoa habonolo le tatelano ea ho bapala. Ho qala ka Lintlha tsa MIDI, seta TRIGGER ho CV MODE ho sebelisa lintlha ho likanale tsa eona ho li-jacks tsa CV, tse tla tsoa ho CV CC1 ho ea ho CC6 Jack eo u e khethang ho MIDI OUTPUT. TRAX e na le setsi sa ho kopanya velocities le enfelopo. Sheba Litlhophiso tsa TRAX. "FX" e ka nkoa e le li-autonomic MIDI control modifiers (CC), li-parameter tsa ka hare, le li-sub-sequencers ho pata kapa ho ntlafatsa litsamaiso tsena. FX Ka kakaretso e tle ka bongata bo ka hlophisoang ebe e sebelisoa hape makhetlo a mangata, e nolofatsa ts'ebeliso.Pina ea FX, TRAX FX / Note FX, Layer FX / Step FX, Play List FX, le Automation kaofela li ka fetola tsela eo tatelano e bapalang ka eona. e hokahane ka hare, modular I/O, le sebaka sa MIDI. A. Song FX Song FX e na le Lebokose la eona le Potlakileng skrineng se seholo 'me e sebetsa ho Pina e Rekotiloeng ea MIDI empa e ka boela ea sebelisoa le Pina ea dummy e nang le loops e se nang letho ho sebelisa FX ho tse ling tse latellanang, TRAX le Layers. Ho ka ba le lihlopha tse fihlang ho tse 16 tsa Song FX, e 'ngoe le e 'ngoe e na le lisebelisoa tse ngata ho fetola tsela eo Pina e utloahalang ka eona.Haeba [: SONG FX:] QB e tobetsoa ha pina e ntse e bapala, tsoelopele ea pina le Playlist e tla tšoaroa haeba [LOOP:ON] QB e khethiloe. Litokiso tsa FX li tla sebelisoa papaling ena ea Song Loop. QB ke mofuta oa "rothela fatše" o phenyang ka li-QB tse sa phutholohang tse amanang le Song FX ka tsela e latelang:

• SONG FX: Tobetsa ho kenya litheolelo tsa Song FX, kapa u tšoare ho kenya li-control tsa mantlha tsa FX bakeng sa lupu ena.
• S:SOLO E Fetolela tatelano ea Pina ho kena le ho tsoa sehlopheng sa Solo. E siea "S" ho QB.
• S:MUTE Toggles Ho Homotsa ha tatelano ea Pina. E siea “x” e nyane ho QB
• SWING:+nn Sena se laola boholo ba ho sotha Loop ena ea Pina e tla ba le eona.
• SEKALE:xxxx Sena se sebetsa tekanyo ea palo ea Pina eohle. Maj/min/Maj7/min7/Mosebelisi 1-4
• LIMIT<>nnn Sena se beha moeli oa molumo ho tlase (<) kapa ka holimo(>) beha Nomoro ea Tlhokomelo
• QUANT:OFF Sena se lekanya nako ea lintlha ho 1/4, 1/8, 1/12, 1/16, 1/24, kapa 1/32 lintlha
• LENGTH:nn Ena ke taolo ea bolelele ba lintlha ho % ho tloha ho 1 ho isa ho 99% ea bolelele ba pele.
• LEVELS:nn Ena ke sesupo sa lebelo la lintlha 1-99% le +1 ho isa ho 50% keketseho
• FX-SEQ:n Khetha FX Sub-Sequencer (ka tlase) 1 ho isa ho 4
• FX-MOV+n E Fetola Sequencer ho Li-Ticks tsa MIDI (1/24 ea kotara note @24PPQN)
• MIRROR:nn Liipone lintlha ka holimo le ka tlase ho nomoro e behiloeng.* Tlas'a QB ena: Litlhophiso, sheba TRAX FX)
• TSOA: E tsoa Pina ea FX QB. Ho tobetsa : SONG FX: le eona e tla tsoa.

Tse ling tsa lipina tsa Song FX QB tse ka holimo li na le menyetla ka mor'a tsona (tobetsa 'me u tšoare ho kena→), ke tsena:

PINA FX: →Litlhophiso:

• PL:0 LOOP:1 FX:1 Khetha hore na FX# ena Loop ea Pina e tla e sebelisa. Qalong e lumellana le nomoro ea Loop
• X EDIT: COPY Kopitsa le ho manamisa linomoro tsa FX ho tsoa ho Loops tse ling, kapa ena bakeng sa ba bang
• X TRANSPOSE:+nn Transpose offset bakeng sa Loop ena +/-48 semitones
• INIMUM LOOPS:nn E beha bonyane makhetlo a 'maloa a Loop ea Pina ka FX# ena e tla bapala.
• AXIMUM BARS:nn E beha meeli ea palo ea mekoallo/mehato eo Loop e tla e bapala pele e tsoa
• TSOA: Tsoa ho menu ena ho khutlela ho : SONG FX: QB. Ha e tsoe ho QB ho tšoara looping.
• [1] [2] ... [15] [16] E tima/bulela dikanale tsa MIDI pina (ho tshwana le ho kgutsisa empa kanale ka nngwe)

SEKALE:xxxx → Sekala sa Basebelisi

• SEBELISA SEKALHO HO: Ka FX ena, e boetse e beha Scale Quantize bakeng sa TRAX, Layer, All
• SAKALE DIDRUMS?HA HO Khetho ea ho sebelisa Scale Quantization ho Percussion MIDI Channel e abetsoeng (10)
• SEKALE EDITA:n Khetha hore na o ka fetola Sekala sefe sa Mosebedisi (1 ho isa ho 4) ka keyboard e ka tlase
•  [C][D][E][F] … "keyboard" e le 'ngoe ea octave ho kenya/ho tlosa lintlha sekaleng
• FX-SEQ:n → Sub-Sequencer Modifiers
• FX_SEQ KHETHA:n Khetha hore na o ka fetola Tatelano efe, 1 ho isa ho 4. Liparamente li tla fetoha
• RE-TRIGGER?HA HO Sub-Sequencer mohato (ho bulela) o tla boela o qalelle lintlha tse seng li ntse li le teng ho eketsa molumo oa eona.
• DRUMS TRIGGER?NO Re-trigger notes (meropa) ho Percussion Channel e abetsoeng, E sebetsa le ho CV's
• + 1 OTAVE? NO E eketsa octave ho lintlha tsohle ha Sub-Sequencer Mohato o ntse o tsoela pele
• VELOCITY LOOWER:nn Drop Note Velocities ha Sub-Sequencer Step e timme, phello ea ducking
• KILL MIRROR?NO Ha ho sena ho tlosa Mirror FX ha Sub-Sequencer Step e butswe
• ELA ELA LENGTH:nn E Fetola bolelele ba Lintlha ha Sub-Sequencer Mohato o ntse o tsoela pele. 1 ho isa ho 150%
• ELA HLOKO LIMIT:nnn E fetoha ho < moedi oa lintlha ha mohato oa Sub-Sequencer o buletsoe. 1 ho ea ho 127.
• MOHATO:NAKO:n/n E beha nako ea mehato joalo ka 1/32, 1/16, 1/8, 1/4, 1/2, 1/1 (bar)
• FX_SEQ:SIZE:nn E beha boholo ba Sub-Sequence 3 ho isa ho 16 mehato. [1] [2] [3] ... [15] [16] Toggles Song-FX Sub-Sequence Mehato ho bula kapa ho tima

Bakeng sa tse ling ka Song FX le Sub-Sequencer, ka kopo bona Buka ea Mosebelisi.

TRAX Trackers e na le mefuta e 'meli ea FX, TRAX Global, le NoteFX. TRAX Global FX e fetola nomoro e le 'ngoe ea TRAX empa kaofela ke "Mangolo", ho sa tsotelehe hore na ho bapaloa eng. Ke Lengolo le le leng feela la TRAX (A, kapa B, joalo-joalo) le ka bapalang hang-hang, empa e 'ngoe le e' ngoe ea li-trackers tsena e ka fapana ka ho feletseng, e 'ngoe le e' ngoe e na le liphutheloana tse 8 tse ikhethang tsa NoteFX tse ka sebelisoang ho lintlha tse khethiloeng ka tatellano. Tsoela pele leqepheng le latelang ho ithuta ka TRAX NoteFX.

Ho fihlella ho theoha ha TRAX, Tobetsa [TRAX:n] QB, ebe u theolela tlase ho:

• S:SOLO E Fetolela tatelano ea Pina ho kena le ho tsoa sehlopheng sa Solo. E siea "S" ho QB.
• S:MUTE Toggles Ho Homotsa ha tatelano ea Pina. E siea “x” e nyane ho QB
• LEVELS: - E beha moeli oa boemo ba Velocity ka kakaretso. Sena ha se attenuator empa ke moeli bakeng sa TRAX.
• SWING+nn E Beha Phekolo ea 'Nete ea Tracker ena ea TRAX. E bapala hantle ho Clock*2 (1/8th's), *e na le Menu (ka tlase)
• MIRROR:nn Liipone lintlha ka holimo le ka tlase ho nomoro e behiloeng.* Tlas'a QB ena: Litlhophiso, (sheba ka tlase)
• SCALE:xxxx Sena se sebetsa tekanyo ea tekanyo ea TRAX ena. Maj/min/Maj7/min7/Mosebelisi 1-4 (sheba ka tlase)
• LIMIT<>nnn Sena se beha moeli oa molumo ho tlase (<) kapa ka holimo(>) beha Nomoro ea Tlhokomelo.
• TRANS:+nn Fetola sena ho fokotsa (ho fetolela) Likarolo tsohle +/- 48 semitone.
• RECORD Bulela Rekoto bakeng sa TRAX QB ena (Litlhaku Tsohle) *Tlas'a QB ena: Rekota Litlhophiso, (sheba II. B.)
• Hlakola Tlosa TRAX QB ena. Ke feela ho TRAX QB ea ho qetela, kapa e tla bontša:
• TRX ERASE Erase e bapalang hona joale TRAX Letter (RECALL ho TRAX Editor e kanna ea khona ho e khutlisa)
• TSOA: Koala drop-down. Ho tobetsa ka holimo ho theoha (TRAX EDIT) le hona ho tla tsoa.
• SWING+nn → Swing Mask

The TRAX Swing e ka fetola ho fetoha (ka lehlakoreng le lebe) ka mefuta e mengata ho tloha ho -99% ho ea ho + 99%. E feta 50% e tloaelehileng, 'me e tla tlosa Swing e kholo (SongFX) haeba e sebetsa. Tlas'a [SWING+/-nn] QB ke Swing Mask Sequencer, e ikhethang ho TRAX. *Tlhokomeliso: Swing ha e sebetse ka lioache tsa TRAX tse sa atisetsoang (/x) joalo ka ha li lula li otla ha li setiloe butle. Tšoara QB ho bula litlhophiso tsa Size ea Mask Sequencer, 2 - 16, le ho fihla ho li-blocks tse 16 ho bulela / ho tima mehato ea ho swing. Oache ea sequencer ena e tšoana le oache ea Konopo ea TRAX.

MIRROR:nn →Litlhophiso

Meeli e ka holimo le e tlase ho mefuta ea Mirror e ka behoa, hammoho le khetho ea octave feela (lintlha tse 6!). Tlas'a

Mirror QB u tla fumana litlhophiso tse latelang:

• MIRROR:nn Sena se tshwana le QB, lokisa mona ha bonolo
• MIRROR:STEP:OCT:NO Ha e setetswe ho YES, e tla kena ka hare ho octave e leng dinoutu tse 6 (pontsho 6+6=12)
• LOWER LIMIT:nn Lintlha tsa mantlha tse ka tlase ho ntlha ena li ke ke tsa bonahala
• MOEDI O PHAHAMENG:nn Lintlha tsa mantlha tse kaholimo ho ntlha ena li ke ke tsa bonahala

SEKALE: xxxx → Sekala sa Basebelisi

• TRANSPOSE : Seta lintlha tsa Transpose offset +/- 48 (boleng bo lekanang le ba QB ho drop-down)
• KOPIA HO TSOA SONGFX Kopitsa Sekala se khethiloeng sa Basebelisi ho tloha ha joale ho Bapala Pina ea FX Scale ho isa Sekala sa TRAX
• SEKALE EDITA:n Khetha hore na o ka fetola Sekala sefe sa Mosebedisi (1 ho isa ho 4) ka keyboard e ka tlase
•  [C][D][E][F] … "keyboard" e le 'ngoe ea octave ho kenya/ho tlosa lintlha sekaleng

TLHOKOMELISO EA TRAX FX

Tsebiso efe kapa efe e le 'ngoe mohatong ofe kapa ofe oa Tatelano ea TRAX e ka ba le FX e sebelisitsoeng ho tsoa mekotleng e 8 ho tracker eo. Ena ke tataiso ea litlhophiso tsa NoteFX le seo ba se etsang. Tšoara [TRAX:n] QB, ebe u khetha Lengolo la TRAX (A) ho kenya TRAX Editor. Re tla kenya lintlha tse 'maloa ebe re sebelisa litšusumetso tse fapaneng ho e' ngoe ea tsona ho hlakisa.

1. Penya habeli ho beha lintlha tse 'maloa ho potoloha marang-rang. * Haeba ena e le TRAX# kapa Lengolo le lecha joale MIDI=Chan.01
2. Tobetsa konopo ea "P" ho bapala lintlha tse ncha ho grid.
3. Tobetsa Hararo molaetsa oo u ka ratang ho kenya FX ho oona, ebe u theohela ho X SEL:n
4.  Tobetsa 'me u tsamaise ho fetolela ho FX SEL:1. Tobetsa ho seta ebe o tsamaisetsa ho FX 1 EDIT ebe o tobetsa ho kenya FX EDIT

[FX*EDIT] e ka fumaneha hape ho tsoa ho grid ka ho tsamaisetsa ho li-pop-up tsa QB ho ea ho FX*EDIT ebe u e ts'oara.

ELA HLOKO FX TRAX:1 A.

• TRAX EDIT FX:1 E khetha hore na u ka hlophisa sephutheloana sefe sa NoteFX. 1 ho 8
• KOPIA HO TLOHA T:1:A FX1 Sena ke ho kopitsa ho tsoa ho TRAX e 'ngoe # le Lengolo le Morero oa Pina.
• TLHOKOMELISO: Khetha se feto-fetohang kapa FX ho eketsa ka tšohanyetso ho:
• NONE: Ha ho taolo e sa reroang
• GLIDE:n Ho fihla ho ho tlala +/- ka mokhoa o sa reroang ho isa ho sekhahla sa Glide
• CC#–/CC#– Ho fihlela ho +/- ka tšohanyetso ho MIDI CC#– boleng
• MICRO ARP E eketsa ka tšohanyetso sebakeng sa ho qala sa Echo/Chop Micro-Arp Sequencer
• VELOCITY E Fetola Lebelo la ho ngola ka Ramotse ka +/- 32
• DELAYER: Nako e sa Lebelloang e Lieha ho fihla maemong a felletseng (li-ticks tse 22)
• BOLELELE: E etsa Randomize Note Bolelele ho fihla ho +/- 8 liboseleise
• CHOP/ECHO Ka Echo ka mokhoa o sa reroang, ka Chop (ratchet) e etsa palo e sa reroang
• TLHOKOMELISO E NTLE: E beha Pitch Wheel hodimo kapa tlase semitone e 1 (100 cents)
• MIDI PAN: E etsa Randomize Panorama ea MIDI (ka ho le letšehali/ka ho le letona) bakeng sa mohato ona.
• SOLO DUCK Solo ke nomoro ena ea TRAX ho feta TRAX e 'ngoe bakeng sa mohato ona feela. Ha ho ama ho Song.
• BRIDGE Ho beoa ka tšohanyetso ha marokho a liheke (ha ho ame ho MIDI)
• TSEBA LINTLHA TSEO E FETILENG FETA LETHATHAMO LA TSE KA HARE:
• Pheta Pheta mohato oa ho qetela. Tlhokomeliso: E kanna ea seta tatelano e tsoa ho khokahano
  • RAND RANGE:n Matla a ho sa fetohe 1 ho isa ho 8
  • ECHO: REPEAT:n E bulela Echo Mode, e beha palo ea mantsoe a bohlokoa. Chop e tima sena.
  • ECHO:FEED:nnn% Boemo ba Echo ho ea ho echo e latelang, ho tloha ho 1% ho isa ho 150%
  • ECHO:NAKO:n:nn Lipolelo tsa nako li arotsoe ka tsela e fapaneng joalo ka Mehato : Liboseleise (ke hore 2:12 ke Mehato e 2.5)
  • CHOP:MULT:OFF Set Chop Multiplier (Ratchet) 1-8 pheta-pheta mohato ka mong. E tima Echo Repeat.
  • CHOP:CURVE:OFF Seta nako ea ho Chop -15 ho ea ho +15.
  • MICRO ARP=s +n Echo/Chop Arp Offset Sequencer. "s" ke mohato oa ho qala, "n" ke +/- lintlha tse fokolitsoeng
  • MIDI PAN:+n MIDI Panorama bakeng sa Ntlha ena/Mohato -64 ho le letšehali ho ea ho +63 ka ho le letona, 0 e bohareng. (*)
  • INSTRUMENT:nnn MIDI Program Phetoho e khetha sesebelisoa se fapaneng (e tlameha ho khutlisetsoa morao)
  • TLHOKOMELISO:+n MIDI Pitch Wheel +/- semitone, CV semitone offset. (*)
  • GLIDE:n Glide Start note. Haeba 0 e sebelisa molaetsa oa ho qetela mocha. CV Glide.
  • RATE YA GLIDE:nnn Lebelo la ho Fetola ho fihlela notong e latelang. MIDI e felletseng, CV e tsamaisana le tlhophiso ea bophara ba MIDI.
  • CC#:nnn HO nnn Bea 2 MIDI CC Boleng bakeng sa molaetsa/mohato ona feela. (*)
  • ELA HLOKO MOHLOMONG:nnn Monyetla oa Tlhahiso ena 'me ke hore FX ea etsahala. 0 ho isa ho 100%
  • FX MAP SIZE:nn E beha Boholo ba FX Mask Sequencer.
  • FX MAP MOHATO:/1 Ka tloaelo Mask o nka mehato ka mehato ea TRAX, eketsa boleng bona ho tsamaea butle haholoanyane.
  • [1] [2] [3]...[15][16] Fetolela FX MAP ho/tima. Mohato o khanyang o thusa FX.

MIDI MPE e lumella karohano ea MIDI FX ho lintlha tse le 'ngoe ha e seng MPE e ama Bohato bohle Bakeng sa ho sheba ka botebo TRAX Note FX, ka kopo bona Buka ea Mosebelisi.

Lintlha ho TRAX NoteFX
Micro-Arp e ka sebelisoa ho lintlha tse nang le NoteFX# eo ba e filoeng ntle le lintlha tsa Echoing ka ho bulela Echo empa u sa sebelise Feed. Sena se na le thuso ha

1. e laoloang ke PLFX: Lintlha tse ling ho tracker li tla fetela mohatong oa micro-arp o behiloeng ke PLFX.
2. e laoloa ka MIDI/CV Remote Notes/CC/CV ho fetisa lintlha ho grid
3. sebelisa Randomize: Micro-Arp ho fetola lintlha tse ling ho grid.

Litlhophiso tsa monyetla li etsa qeto ea hore na lengolo le sebelisitsoeng NoteFX# le tla bapala, ha FX MAP (mask) e ntse e tla lumella molaetsa ho bapala, empa e sa sebelise FX efe kapa efe ho eona. Joalo ka

Robetsana

Skip Notes e fapana monyetla, sena se boetse se etsa hore lintlha li nyamele. Sena se sebelisoa hantle ka mehato e nang le likhetho! Chop Curve setting (+/-15) le eona e tla ama nako ea Echo (e liehang ho ea kapele, kapa e potlakile ho ea butle). "Copy From", haeba e tobetse ka phoso, e ka fetoloa ho NoteFX ea hona joale (kapa e tlohetsoe e le mong) ho thibela leha e le efe.

Likarolo tsa FX
E bōpiloe ka ho bapala ka tatelano e na le tse seng kae Global (ka Layer QB) FX, Litaolo tsa Playlist, le tse ling tse behiloeng ke Song FX khethang ho tsona (e leng Etsa kopo ho: Layers) tse pharallang kaofela Layer QB's.The Layer QB Global FX are Time Quantizing, handy bakeng sa tatellano e "bapaloang", Boemo le Bolelele, e amang Litlhaku tsohle tsa Layer ho QB e khethiloeng, Scales e ka nkuoang ke Song FX, le Density, ea plucker ea "ts'esaane" palo ea lintlha. Litlhophiso tsena li ka fumaneha ka ho tobetsa Layer QB bakeng sa ho theoha, le ho thellela tlase.

• LAYER 1 Tobetsa ho kenya litheolelo bakeng sa Song FX, kapa u tšoare ho kenya Layer Loop Step Sequencer.
• L RECORD Tobetsa ho seta Li-Record Bars (mehato) le letsoho ho Rekota. * Tlas'a QB ena: Rekota Litlhophiso
• S:SOLO E Fetolela tatelano ea Pina ho kena le ho tsoa sehlopheng sa Solo. E siea "S" ho QB.
• S:MUTE Toggles Ho Homotsa ha tatelano ea Pina. E siea “x” e nyane ho QB
• APPEND Toggles Layer Recording Append Function ho lumella ho imena habeli ha boholo ba lirekoto tse setehileng.
• LEVELS:nn Ena ke sesupo sa lebelo la lintlha 1-99% le +1 ho isa ho 50% keketseho
• QUANT:OFF Sena se lekanya nako ea lintlha ho 1/4, 1/8, 1/12, 1/16, 1/24, kapa 1/32 lintlha
• MIRROR:nn Liipone lintlha ka holimo le ka tlase ho nomoro e behiloeng.* Tlas'a QB ena: Litlhophiso, sheba TRAX FX)
• SEKALE:xxxx Sena se sebetsa tekanyo ea palo ea Layers. Maj/min/Maj7/min7/Mosebelisi 1-4
• LIMIT<>nnn Sena se beha moeli oa molumo ho tlase (<) kapa ka holimo(>) beha Nomoro ea Tlhokomelo
• TRANS:+nn Fetola sena ho fokotsa (ho fetolela) Likarolo tsohle +/- 48 semitone.
• KILL LAST Tobetsa ebe u khetha "YES" ho hlakola rekoto e fetileng, e ka sebelisoa khafetsa.
• TLOSA Hlakola Lera lena QB (Ke QB e ka tlase feela e ka hlakoloang)
• TSOA: E tsoa Pina ea FX QB. Ho tobetsa : SONG FX: le eona e tla tsoa.

L REKOTA→Litlhophiso

• Ho na le litlhophiso tse ling tsa ho rekota ho Layer QB ena.
• BARS:nn Beha Loop Size ka har'a mekoallo (mehato) joalo ka QB ha u itokisetsa ho rekota.
• REC HO FIHLELA:xxx Emisa ho rekota 'me u emele ho feta (HA HO LINTLHA) kapa emisa Rekota ka mor'a Loop (1-SHOT)
• REC LAY MUTE Beha ho YES ho khutsisa Mekhahlelo e meng ha o ntse o rekota ka mafolofolo (e tla koala semumu ka mor'a loop)
• QUANT START Ntle le haeba e behiloe ho NONE, qalo ea palo e tsamaisana le qalo ea ho rekota ho:
• BARS: Ho qala ka boholo ba loop haeba mekoallo ea boholo ba Layer Step ke > loop bar (ea kamehla)
• ZERO: Qalo ea Mehato ea Sequencer, ho nka hore loop e qala e otla 1
• TSEBE E QALANG Sena se tla qala ho rekota ka oache feela (bareng) e leng molemo ha o rekota ho tsoa ho
• DAW kapa HW Sequencer e se nang lintlha kapa MIDI CC's ho qala ho rekota. (V.1.3)
• Lera Mohato FX
• Mohato o mong le o mong ho Layer Loop Bar Step Sequencer o na le FX e ikhethang e ka sebelisoang.
• Ho fihlella lenane la FX, tsamaisetsa ka ho le letšehali ho nomoro ea mohato. Sena se tla totobatsa mola oohle. Penya habeli ho bula lenane la FX.

Lethathamo lena la likhetho ke le latelang:

• TRANSPOSE Fetolela lintlha tsohle ho Litlhaku tsa Lera mohatong ona.
• MAEMO Fetola kakaretso ea lebelo la lintlha tsohle mohatong ona oa ho nyoloha +/-127
• SEBELISA RE-TRIGGER? Haeba Song Loop FX e ntse e bapala ke Sub-Sequencer, e ka boela ea qapa lintlha tsa Layers Mohatong ona (*)
• SEBELISA PINA FX? Haeba Pina ea Loop FX e ntse e bapala, e sebelise ke FX ho Mekhahlelo ena Mohatong ona.
• RALA SOLO? Lera lena le ka ikopanya le lipina tsa Soloed, kapa ea ba pina e le 'ngoe (Mute overrides)
• LITŠOANTŠISO Kgetha "ALL" ho sebelisa kanale e rekotiloeng ea mantlha, kapa khetha mocha oo bohle ba o sebelisang Mohatong ona.
• TSOA Khutlela ho Layer Sequencer Editor

Hlokomela: Khetho ea ho qala hape ho ho bapala ha SongFX Sequencer le eona e tlameha ho buloa hore Layer Note Re-Triggering e etsahale.

Sebelisa Song FX?
Ha khetho e kaholimo ea "Sebelisa SongFX" e nolofalitsoe, pina e latelang ea pinaFX eo hajoale e bapalang / e laetsoeng e tla fetola tsela eo Layers in the Step e tla bapala ka eona:
MIRROR, SUB-SEQ KILL MIRROR, LIMIT, SUB-SEQ LIMIT, LEVEL, SUB-SEQ VELOCITY TLASE, LENGTH, SUBSE QNOTE LENGTH, SUB-SEQ +1 OCTAVE. Sheba Bukana ea Mosebelisi bakeng sa tse ling. Litlhophiso tsena ke tsa lefatše lohle. Liteko tse fetelletseng li ka hlahisa liphetho tse ntle ka liloupa tse seng kae feela. Hopola hore mocha oa li-percussion oa Layer o rekotiloeng o ka fetoloa ke tsena FX. Haeba u sa batle hore sena se etsahale, koalla moqoqo ho Layer QB e fapaneng.

Lenane la Lipapali FX

Lethathamo la Lipapali la FX, kapa PLFX, le ka ekeletsoa bolokong bofe kapa bofe ba Lethathamo la Lipapali ka ho penya habeli boloko le ho khetha [*PLFX*] ho tsoa ho li-QB tse pop-up. Ha block e kentsoe, PLFX e ea etsoa, ​​​​e ka fetolang paramente efe kapa efe ho Sequarallel eo u e behileng. Pina e 'ngoe le e' ngoe e na le lihlopha tse 8 tsa PLFX, tse nang le liphetoho tse 4 ho e 'ngoe le e 'ngoe. Ho kenya lenane la PLFX u tla bona: PLFX#:- Tobetsa ho khetha nomoro ea bongata ea PLFX 1-8. Sena se tlameha ho hlophisoa, haeba se sa hlophisoa PLFX ena e hlokomolohuoa COPY HO TSOA: - Tobetsa ebe u khetha ho Kopitsa liphutheloana tse ling ho ena 1: 2: 3: 4: Tobetsa e 'ngoe ea tsena ho abela paramente ebe boleng ba ho e beha neng. PLFX ena e kentsoe (ka tlase) : TSOA: Tobetsa ho tsoa ho khutlela ho grid List List. Bakeng sa ex ea ronaample, ho Play List tsamaisetsa pina e se nang letho ea TRAX le [+KENYA E NCHA+] liboloko tse 4. Tsena li tla sebelisoa ho tsamaisa PLFX. Joale tobetsa block e ka holimo habeli ebe u khetha [*PLFX*]. Beha PLFX# ho 1.

Ho khetha paramente

• Tobetsa e 'ngoe ea linomoro' me u tla isoa skrineng se seholo ho fumana parameter ho fetola
• Ha u se u fumane paramethara, ha re leke master [TRANS:+00] tobetsa ho e totobatsa empa u tlohe ho zero.
• Tobetsa konopo ea "S" ho boloka paramente ho sephutheloana sa PLFX. Mohlomong u hlokometse "S" LED e benyang. Joale o tla khutlela lethathamong la PLFX, 'me lebitso la paramethara MASTER TRANSPOSE le bonts'a.
• E-ea ho tsoa 'me u bule PLFX e ncha ho 3rd TRAX block.
• Khetha PLFX#:2 sephutheloana ebe u tobetsa 1: ho e hlophisa. U tla boela u isoa skrineng se seholo.
• Tsamaisetsa holimo ho [TRANS:+00] empa fetola ho +5 semitones ebe o tobetsa konopo ea "S".
• Tsoa lethathamong la PLFX 'me u hlome sebaka se kaholimo sa TRAX ka ho tobetsa habeli le ho khetha [::ARM::] QB.

Tsoa ho Play List ([:: TSOA::] kapa feela tšoara encoder ka keriti) le Hit Play ("P" konopo) Haeba u na le tatelano tse ling bapala, ka nako eo transpose mod's tla fetola bona +5 semitones. Haeba ho se joalo, tsamaisetsa ho [TRANS:+00] 'me u tla e bona e fetoha. PLFX e ka sebelisoa ho fetola paramethara efe kapa efe, empa litekanyo tsa nako li ka fetoha ka tsela eo u neng u sa e bona esale pele kaha ke khoho pele ho bothata ba lehe, bo hlahang pele?

Boiketsetso
Sequaralel e boetse e na le Automation Recorder. Sena ke sa ho boloka li-tweaks tsa MIDI CC / Pitch Bend tse ka qalisoang hape Lethathamong la Lipapali ka ho eketsa block ho pina ea AU le ho hlalosa hore na MIDI e lokela ho ba efe. ke hore ho eketsa sekontiri se itseng ho Channel 1.Automation e ka boela ea sebelisoa mocha o hole ho hlahisa tsela e nepahetseng eo u e fetisitseng ka eona nakong ea papali. Palo efe kapa efe ea li-tweaks e ka etsahala ho rekota. *Sena se ka ba matla, empa ela hloko nako ea hau! Nako ea ho rekota ea Automation e ka ba bolelele ba li-bar 999, kahoo e ka ameha ho sebelisoa nakong ea pina eohle haeba motho a hlometse pele pina e letsoa.

Remote Control

Sequaralel e na le mefuta le mekhoa e fapaneng ea taolo e hole

1. Taolo e ka reroang ea bokahohleng ea paramente efe kapa efe e sebelisang lintlha tsa MIDI CC's le MIDI seteisheneng.
2. Linoutu tse Remoutu tsa Track Track (bakeng sa limutes/solos/cimutes/rekote jj)
3. TRAX CC Remotes ho sebelisoa e le sequencer ea mofuta oa lefa
4. CV e kenya taolo e hole ea paramethara efe kapa efe
5. Taolo ea Remote ea ka hare ea PLFX
6. Automation remoutu rekota

Tse 'maloa tsa tsena li ka hlophisoa ka "MIDI ithuta" tšobotsi, kapa ka ho toba phanele mananeo a khethang/fumana / boloka mokhoa.The universal remote lists (CC & Notes) na le sebaka (ka Song#) le manane a Global a bohlokoa haholo. mesh e le hore li-remoutu tsa Song# li khone ho feta tsa lefats'e. Ka lebaka la mefuta e fapaneng le likarolo tsa Remotes, ke nkile qeto ea ho tlohela sena bukeng ea mosebelisi (Leqephe la 32)

Li-Gates le li-CV

Sequarallel e na le li-jacks tse 14 tse lokisehang bakeng sa liheke tse tsoang, li-trigger, le Control Vol.tages ho tloha ho -5V ho ea + 5VLi-jacks tse 12 tse ka sehloohong, ho CV Mode 1-4, li ka bonoa e le mela e 4 ho laola 4 VCO's. Karolo ea pele ea li-jack, ka ho le letšehali ho li-LED tse tala, li etselitsoe Gates le li-triggers, ha likholomo tsa 2 le 3 e le CV. The 3rd column's CV's e ka itokisetsoa ho fihla ho tse 8 tse fapaneng tsa VCO's jack e le 'ngoe kahoo li nepahetse haholoanyane. tsela.Ha ho bapaloa noto, jack ea Gate e lula e latela eng kapa eng eo jack CV e abetsoeng ho eona. Lehlakore le letšehali la ponts'o le bonts'a lintlha tse romelloang moleng o mong le o mong o tsamaellanang. Kholumo ea 2, VEL, kapa CC1 ho CC4, e ka abeloa ho fana ka maemo a Velocity, Triggered or Freerunningenvelope shape, Envelope*Velocity, value efe kapa efe ea MIDI CC ho tsoa ho eng kapa eng. mohloli, kapa Liheke kapa lintho tse susumetsang.Lebelo le Lienfelopo li ka hokeloa mohloling o le mong le Heke+CV, e tsoang ho Lintlha.Haeba CV MODE:n e setetswe ho DRUMS, ebe tse 12 tsa dijeke tsena kaofela di fetoha dihloma meropa tse lokisehang. Leha ho le joalo
ho bapala, lehlakore le letšehali la pontšo le tla bontša marang-rang a tšoanang le li-jacks le tse sebetsang.

[CV MODE:n] [CV MODE:n] QB e kgetha ho fihla ho 4 Gate+CV/CC Jacks configurations, kapa "Drums" mode. Defaultconfiguration e tšoana bakeng sa 4 kaofela: TRAX:1 A Lanes 1 to 4 e tla hlahisoa ho Gate, Velocity (cc1 toCC4), le CV output jack rows. Li-jacks tsa CC5 le CC6 li tla hlahisa TRAX 1 Reset le master Transpose offset.

Heke+CV/CC likabelo tsa Jack
Mesebetsi ena ea jack e ka fetoloa tlas'a [CV MODE:n] QB. Tobetsa o hatelle ho kenya lenane la li-setting:

• CV MODE:n Kgetha CV MODE ho e lokisa. E tla ba khethong ea QB ha u kenya litlhophiso tsena.
• →JACK:xxxxx Khetha jeke eo u batlang ho e hlophisa, ke hore, GATE+CV 1, CC 6
• SOURCE:xxx Khetha mohloli oa Jack ho tsoa ho tse latelang:
• HA HO MOTHO Ha ho Mohloli
• SONG:LOOPn Loop ea Pina e itseng # kapa "ALL" Song Loops e tla romella jack(s)
• TRAX:n L Trax #1-5 e nang le Lengolo la TRAX kapa litlhaku tsa "ALL" li tla romela ho jack (s)
• LAYER:n L Layer #1-4 e nang le Layer Letter kapa "ALL" litlhaku li tla romela ho jekete ena.
• MIDI IN Panel MIDI IN mabapi le kanale e behiloeng ea MIDI e tla romella jack(s)
• LINK IN Backplane LINK Kenyeletso mabapi le kanale(li)sete e tla romella ho Jack(s) ena
• MIDI OUT All Panel MIDI Output on set (li)kana e tla romelloa ho jeko ena
• LINK OUT All Backplane LINK Output on sete channel(s) tla romela ho jeko ena
• MIDI CH:nn Bakeng sa mohloli oa Song/Layer/MIDI & LINK I/O, sena se beha Channel 1-16 kapa "ALL"
• /LANE#:n Bakeng sa Mohloli oa TRAX, sena se beha hore na TRAX Tracker Lane (1-4) e tla romela jack ena.
• FUNC:xxxx Bakeng sa Jacks CC1 ho isa CC6, sena se khetha mohloli oa mohloli o tla romelloa ho jack ena:
• HA HO NA Ha ho Mosebetsi
• VELOCITY Mabelo a Lintlha tsa Mohloli a tla romelloa jekong ena.
• VEL+ENVn The Velocity of Source Notes e tla fokotsoa ke Enfelopo# n (1-4)
• ENVELOPE Enfelopo, mohloli/mofuta joalo ka ha ho hlalositsoe ke litlhophiso tsa ENV e tla ba jekeng ena.
• CC#:nnn MIDI CC#:0 -127 (nnn) e tsoang Mohloling/Channel e tla romela jeke ena.
• TR:xxx A Trigger e tla hlahisoa ho tsoa ho Global Source e khethiloeng:
• SONG LOOP Ha Pina Loop e fela/loops, ho tla romelloa pulse ho tsoa jekeng ena
• BARS Sebaka se seng le se seng (tekanyo) se qalang se tla romela molumo ho jack ena
• BARS+BEAT E 'ngoe le e 'ngoe ea Beat (4/4) le Bar e tla romela molumo ho jack ena
• TRAXn RESET Ha ho khethiloe TRAX# tatelano e qala, ho romelloa pulse ho jack ena.
• BAPALA Ha Sequaralel e Qala Ho bapala pulse ho romelloa jekong ena
• SOLO Leha Track efe kapa efe e le Soloed, jack ena e tla be e phahame

CV:xxx

• CV e tla hlahisoa ho tsoa ho Global Source e khethiloeng:
• TRANSPOSE The Master Transpose Offset (ka V/Oct) e romelloa ho Jack ena
• BARS+BEAT 4 Voltage mehato (0-1-2-3 volts) holim'a li-beats

MOLA:n

• vvv Khetha lebitso la VCO Tuning (vvv) bakeng sa mola ona (n) oa jack ena. (lijeke tsa GATE+CV feela)
• /BI-POLAR: Khetha haeba jack e ka ea lehlakoreng le fosahetseng. (CC Jacks feela)
• OCTAVE +/-n Beha CV Octave offset bakeng sa Jack ena, -1 ho +2 octave/volts. (lijeke tsa GATE+CV feela)
• /ENV ELA HLOKO BOLELELE E: E tla fapana boholo ba enfelopo ka lintlha. Che: E sebelisa ENV SIZE e behiloeng (CC Jacks feela)
• Kopanya MIDI/LINK IN: E: E tla Romela MIDI / LINK ka har'a seteishene sa MIDI ho jack ena.
• THIBELA MIDI/LINK IN: E: E tla thibela tlhahiso ea MIDI ea Mohloli ho jack ena.(Joaloka CV Soloing)
• KOPIA HO: CV MODE: Khetha Mokhoa o fapaneng oa CV# kapa Pina# (Kaofela) ho kopitsa ho eona.
• Pina#: Likopi tse tšoanang CV MODE# pineng e khethiloeng (ke hore ho CV Mode1, e fumana CV Mode 1)

Gates & CV's.. tsoela pele

Malebela le Maqheka a Mokhoa oa CV:

1. Kaha e 'ngoe le e' ngoe ea CV MODE 1-4 e ka fetola ka ho feletseng boto ea mesebetsi ea jack e 14, e ka 'na ea e-ba khopolo e ntle ho e arola hohle, ke hore, Ho sebelisa le VCO's ka li-filters khahlanong le taolo ea VCA (Mofuta o fapaneng oa Enfelopo)
2. Joalo ka ha Morero o mong le o mong oa Pina o ka ba le Mekhoa ea ona ea 4 ea CV, haeba u batla hore e se e theiloe ha Morero o mocha oa Pina o etsoa, ​​hlophisa Mekhoa ea CV ka SONG:00, moo ntho e ngoe le e ngoe e sa fetoheng.
3. Arola mefuta ea Enfelopo ea hau. ke hore, Env#1 e lula e le mofuta oa ADSR, ha Env#2 e le mofuta oa ADSR-joaloka Parameter e qetellang e le 0 volts, empa Env#3 e tšoana le LFO bakeng sa liphetoho tse hlahisitsoeng ...

LITHEPA:n Mokhoa

Boemo ba bo-5 ba [CV MODE:n] QB ke ea ho tsosa moferefere. Lenane lohle la 3 x 4 la li-jacks tse 12 e ka ba li-comedrum triggers empa mekhoa le lits'ebetso tsa CC5 le CC6 I/O li ntse li ka hlophisoa ho tloha ho [MIDI PUSH] QB. Grid ena e bontšoa nakong ea Play kapa ha ho se na lisebelisoa tsa Clock ho bontša tse kholo. lipalo-palo tsa palo. E 'ngoe le e' ngoe ea "lebokose" ka har'a marang-rang e na le nomoro ea lintlha tsa MIDI e tla qala jack e tsamaisanang. Ho fihlella ponts'o ea marang-rang le ho hlophisa, tsamaisetsa holimo ho Mabokose a Kapele-pele ( ho [LOOP: OFF]), emisa ho tsoela pele. ho tsamaisetsa hodimo ho keriti. Khefutso ena e thibela meqolo e potlakileng ho Loop QB nakong ea ts'ebetso e kenang ka har'a meropa!
Tobetsa lebokoseng lefe kapa lefe la moqomo ho grid ho hlophisa boleng ba eona.

DRUMS:n Litlhophiso
Ka lehlakoreng le leng, linomoro tsa lintlha tsa moropa le litlhophiso tse ling li ka fumaneha ka mor'a [DRUMS] QB Tobetsa & Tšoara [DRUMS:n] QB ho kenya litlhophiso kapa ho hlophisa meropa mananeng. Menu e tjena:

• DRUMS=CHAN:nn Sena se tla seta kanale ya MIDI ya dipercussion tsa Sequarallel (hangata 10)
• TRIGGER:xxxx Khetha bolelele ba lintlha tsa mantlha ho li-jacks tsa heke, kapa 1mS ho isa ho 20mS bakeng sa bolelele ba trigger
• THULAGANYO:n Kgetha Moralo wa Drum Grid oo o tla o sebedisa/o o hlophisa. Ho ka ba le litlhophiso tse fihlang ho tse 8
• MOHLOLI: Khetha (s) mohloli bakeng sa Gate/Trigger ea meropa (e tlameha ho ba mocha oa meropa):
• HA HO MOTHO Ha ho mohloli o ka hare o tla qhomisa meropa. Kenyelletso e kopaneng ea Midi/Link e ntse e ka qala.
• SONG Feela Percussion in Song Loops e tla qala li-jack
• LAYER Feela Percussion in Layers e tla tsosa li-jack
• SONG+LAYER Pina le Layer percussions li tla tsosa li-jack
• TRAX Feela TRAX (ka mocha oa meropa) e tla tsosa li-jacks
• Lipina tsa TRAX+ SONG le TRAX li tla tsosa li-jack
• TRAX+LAYER TRAX le Layer percussions li tla tsosa li-jack
• Li-sequence TSOHLE tsa ka hare ho kanale ea meropa li tla tsosa li-jacks
• Kopanya MIDI HO: Kenyelletso ea phanele ea MIDI seteisheneng sa meropa e tla tsosa li-jack
• SEBELISA LINKI: Kenyelletso ea Backplane LINK ho kanale ea meropa e tla tsosa li-jack
• BLOCK MIDI OUT: E: Meropa MIDI e ke ke ea romelloa ho Panel MIDI out, ho sebelisoa feela lintho tse susumetsang.
• BLOCK LINK OUT: E: Meropa MIDI e ke ke ea romelloa ho Panel LINK out, ho sebelisoa feela lintho tse susumetsang.
• [ORD:xxxxx] Chord Order QB
• Litlhahiso tsa Order Quick-box li hokahane le CV Mode ka holimo ka hore e hlalosa hore na lintlha li tla ba joang
• e abuoe ho Li-Jack / CV Jacks. Sena se na le thuso haeba lintlha tse ngata li le ho MIDI Channel e tšoanang le eo
• chords. Haeba mohloli o mong le o mong oa CV Mode o le mocha o fapaneng, ha ho na lebaka la ho hlophisa.
• Ho na le mefuta e 5 ea li-ORD, 'me haeba e ts'oaroa e' ngoe le e 'ngoe e na le litlhophiso tsa eona. * Ka kopo, sheba buka ea mosebelisi bakeng sa botebo
• [ORD:STACK]
• Lintlha li Tekoa ho tsoa ho jack ea Gate+CV Mela 1 ho isa ho 4. Tlas'a QB ho na le litlhophiso tse amanang le Nako.
  ho ntlafatsa ho sebetsana le lintlha, le khetho ea ketso haeba ho na le lintlha tse fetang 4
• [ORD:RANGE]Lintlha li arotsoe ka mefuta ea lintlha tse behiloeng, joalo ka keyboard ea 4-way, ho Gate+CV jacksRange e fapane ho feta Mekhoa e meng ea Litaelo ka hore e kopanya mehloli e mengata ea likanale, ho fihla ho 4, ho arola. ka har'a mekhahlelo Sena se molemo bakeng sa ho arola VCO's ka bass,/treble/ high response.Ho tšoara
• [ORD:RANGE] QB e lumella tlhophiso ea mekhahlelo.
• [ORD:CYCLE] E ts'oana le Stack, empa lintlha li tsamaisoa ka baesekele ho ea holimo kapa tlase. Tlas'a QB ho na le liphetoho bakeng sa nako ea ho lokolloa pakeng tsa lintlha, tse hlokahalang ho potoloha li-jack.
• [ORD:RANDM] E aba li-jack feela ka tšohanyetso ka litlhophiso tsa menyetla ea ho thella, e fumanehang tlasa QB.
• [ORD:ARPEG] E 'ngoe le e' ngoe ea Heke + CV jack Row e fetoha Arpeggiator e sebetsang ka botlalo ho tloha ho CV Mode. Litlhophiso tse ka tlase ho QB ena li bonolo haholo haeba u tloaelane le Arp, empa sheba bukana ea mosebelisi bakeng sa lintlha tse ntle.

[TUNE:+n]
Li-CV kaofela li ka hlophisoa ka nako e le 'ngoe holimo kapa tlase (ka lisente) ka QB ena ka ho e khetha feela le ho lokisa boleng ba +/-99 cents. Ho hlophisa CV ea motho ka mong, tšoara QB ho kenya litlhophiso:

• TLHOKOMELISO: ROW:n Mela e 4 e ka lokisoa ka bonngoe mona.
• FINE TUNE:CC5/6 Li-jacks tse peli tse tlase tsa CC le tsona li ka hlophisoa hantle (kaha li ka hlahisa transpose)
• ZERO NOTE:ROW:n Mela e 4 ea Zero-Volt e ka hlophisoa mona. Kamehla ke Note#36.
• -CALIBRATES- Karolo ena e ipapisitse le matla a VCO a hokahaneng (ka tlase)
• >EDIT NAME Bulela sena ho hlophisa mabitso a ka tlase (ho e-na le ho a khetha feela)
• R1:xxx – R4:xxx Tobetsa ho khetha tokiso ea VCO eo u ka e sebelisang Moleng o mong le o mong (CV)

VCO Auto-Tune

Bakeng sa jack e 'ngoe le e' ngoe ea CV (mola oa 1 ho isa ho 4), ho ka etsoa litokiso tse fihlang ho tse 8 tsa VCO. E 'ngoe le e' ngoe e ka bitsoa (mohlomong ho supa VCO eo u nang le eona) 'me, hobane ha li sebelisoe ho jekete e 'ngoe ea CV, li nepahetse haholo. Ha re nka hore u sa tsoa bala [TUNE:+n] QB ka holimo, latela litaelo tsena ho lekanya VCO:

1. Khetha lebitso la jack la Row CV (ke hore, R1: VCO SETUP..). U ka e reha hape hona joale haeba u batla. (ho lokile)
2. Tsamaisetsa tlase ho CALIBRATE:n ebe o seta “n” Mothalong o le mong. U tla isoa ho Calibrate Screen.
3. Fetolela VCO ea hau ho Square-wave le max output, ebe u e kopanya ho jack MIDI IN jack.
4. Kopanya CV ea hau ea VCO ho Row:n CV (etsa bonnete ba hore u tlosa li-modulations/offsets joalo-joalo) Tobetsa konopo ea "S" ho qala. "NOTES:nnn" e tla tsoela pele ka tlase ho pontšo. Haeba ho se joalo, hlahloba likhokahano tsa hau ebe u leka hape. Ena ke ts'ebetso e tenang empa hang ha e se e entsoe, e etsoa ka ho sa feleng! Ke khothaletsa ho lokisa li-jacks tsohle tse 4 tsa CV ka tsela ena ha VCO e patiloe, empa ho ho uena!

Bakeng sa lintlha tse ling mabapi le Mekhoa ea CV le tokiso, ka kopo bona bukana e felletseng ea mosebelisi

Litlhophiso

Karolo ea ho qetela ea Tataiso ena ea "Quick-Start" e sebetsana le Global Settings of the Sequarallel le mantsoe a karohano, u se u se u qetile!Litlhophiso tsa Global li bolela hore litlhophiso tsena li na le morero o mong le o mong oa Pina, 'me li ka fetoloa ntle le ho hlophisa Song:00 kapa ho lahleheloa. tlhophiso ka lebaka la ho se etse Save: Edit.

• REMOTE: BONTŠA: EE
  Ha sena se buletsoe, liphetoho tse ling tsa remote control li tla ntlafatsa skrine ho bontša liphetoho. Sena se sebelisa matla a mangata a ho sebetsa 'me se ka kopanya liketso tsa skrine ha ho na le lintho tse ngata tse hlahang, kahoo li ka koaloa.
• SYSEX POLOKO
  Sena ke ho boloka morero oa pina kapa merero eohle ho DAW ka MIDI ka mokhoa oa SysEx. Sheba Buka ea Mosebelisi bakeng sa litaelo.
• BOLOKA SKREEN:x minSkrine saver se tla fokotsa skrine ho fihla ho hoo e ka bang 30% ka mor'a nako e behiloeng ka metsotso. Boemo ke appx. Metsotso e 3 ho isa ho 60
  metsotso. Ho fifala hona ho tla sireletsa skrini hore se se ke sa chesoa ke OLED ka likhoeli tse ngata tsa tšebeliso + boloka matla. Ho tsamaisa the
  encoder kapa ho tobetsa konopo efe kapa efe ho tla khutlisetsa ponts'o ho khanya e tloaelehileng.
• CV KA HO →: TLHOKOMELA KENA
  Kenyeletso ea CV (CC5, CC6, CKO) ho ea ho MIDI setere: OUTPUT: ka kotloloho ho tlhahiso kapa MERGE INPUT: e kopanya le phanele ea MIDI ho latela litlhophiso tsohle tsa MIDI ho. .Joalokaha jeke e ka hlophisoa ho romella lintlha tsa MIDI, Pitch Bend, After Touch kapa CC's, MIDI Layers e ka rekotoa ho tsoa ho CV. Ka mokhoa o ts'oanang, Lintlha li ka ngolisoa ho tracker ea TRAX. Hlokomela hore haeba u sa rera ho sebelisa li-jacks tsa CC ka tsela ena, ho beha OUTPUT ka kotloloho ho bobebe ho processor.
• THIBELA METHERO PC: EE
  Sena se tla bulela ho thibela melaetsa ea PC seteisheneng sa percussion (10 ka ho sa feleng) kaha li-synths tse ling tsa GM ha li e rate!
• ROMELA MIDI RESET: YES
  Sena se tla lumella MIDI master reset (0xFF) ho romelloa ha o kenya morero oa pina kapa ho tobetsa [MIDI PUSH] QB Button. Hlokomela hore li-synths tse ling ha li etse letho ka reset. Sheba li-synths tsa hau bakeng sa lintlha tse ka bang teng.
• ROMELA MIDI OCHE: EE
  Ha konopo ea Play e tobetsa, melaetsa ea sync ea MIDI e tla romelloa haeba sena se buletsoe. Oache ea MIDI e loketse ho lieha ha synth kapa sync ea arpeggio haeba e ikemiselitse ho sebelisa oache ea kantle, hammoho le ho latela MIDI seq's / FX ka ketane.
• TŠEBELETSO EA HO TSAMAISA: NO
  Beha ho YES ho hlahisa MIDI Clock ka mor'a liphetoho tsa swing. Sena se ka ba molemo bakeng sa ho sututsa Arp kapa ho lieha ha synth empa ba bang ha ba rate oache e fapaneng. Teko e tla senola 'nete!
• OACH YA MAHALA YA MAHALA: NO
  Beha ho e, ho hlahisa oache e tsoelang pele e ipapisitseng le oache ea modular kapa oache ea MIDI ho sa tsotelehe ho Bapala kapa ho Emiswa. Hang ha mohloli oa ho kenya oache o emisa, tlhahiso ea oache ea MIDI e tla emisa. Sena se ka thusa ho tsoela pele ka tieho e telele ho asynth e fetolang mohloli oa oache ho ea kahare ka mor'a hore oache e kenngoeng e eme.
• 'Mapa oa NRPN
  Ho fihla ho 16 NRPN MSB/LSB Melaetsa e ka hlophisoa hore e sebelisoe lefatšeng ka bophara. Ho bonolo khetha NRPN Slot, ebe u beha boleng ba MSB leLSB ho latela lethathamo la NRPN la synth's manual.
• TSIETSO KHOTI
  Sekhahla sa Sequarallel's CV Slew ke li-microseconds tse 'maloa, empa li-patches tse telele, ho sefa ho kenya CV ho li-module, kapa ho lieha ha nako ka lehlakoreng le leng ho ka baka mathata a nako ea CV / Gate. Hobane li-module tse ngata tsa "1-shot" li itšetlehile ka tlhahiso e tsitsitseng ea CV nakong ea heke, Sequarallel e beha CV pele e romela Heke. Nako ena ea ho lieha, e sebetsang ho liheke tsohle, e ka atolosoa ka milliseconds e 'maloa ka"GATE. DELAY:nn” setting.
• Quick-Box Edit Mode
  Sequaralel e ithorisa ka khetho e ikhethang ea ho hlalosa Mabokose a Potlakang leqepheng la sehlooho. Litlhophiso tsa basebelisi li ka fapana bakeng sa Morero o mong le o mong oa Pina. Mabokose a potlakang a ka ntšoa kapa a eketsoa, ​​a kopitsoa 'me a hlophisoa ka tatellano efe kapa efe, ho sa tsotellehe hore na u bona ho loketse.
• Ho kenya mokhoa oa QB Edita:
  • tobetsa 'me u tšoare konopo ea "S" ho fihlela LED e qala ho benya (hoo e ka bang metsotsoana e 5)
  • Ho fetola QB, tsamaisetsa ho eona, tobetsa ebe u khetha QB e fapaneng. Tobetsa ho tsoa.
  • Ho Eketsa (kenya) QB, tsamaisetsa moo o batlang ho e eketsa teng, tobetsa ebe o tsamaisetsa ho [ADD: ]. Tobetsa ho etsa kopo. Tobetsa hape ho fetola.
  • Ho HLAKOLA QB, tsamaisetsa ho eona, tobetsa ebe u tsamaisetsa tlase ho [Tlosa]. Tobetsa 'me QB e felile.
  • Ho Tsoa ho QB-Edit Mode, tobetsa konopo ea "S".

Maikutlo a Koala

Hantle, e teng ka bokhutšoanyane! Tataiso ena e lokela ho lekana ho u tsamaisa 'me e ke ke ea fokotseha haholo ntle le ho lahleheloa ke mesebetsi ea bohlokoa ea Sequarallel. Leha ho le joalo, likarolo tse ling li fokola haholo, joalo ka TRAX Editor pop-up QB'le mokhoa oa ho sebelisa mesebetsi ea ho hlophisa ka botlalo. U se ke ua tsieleha haeba u sa ka ua e utloisisa.Buka ea Mosebelisi e sheba Sequarallel ka mokhoa o rarahaneng haholo 'me e kenyelletsa likhokahano tsa livideo ho tsoela pele ho hlalosa mosebetsi kapa mokhoa, ho nka hore bukana e baloa ka .pdf format. ho feta kopi e thata.Mokhoa oa "rekoto" ho Sequaralel ke ho fumana tatelano le ho sebetsa habonolo ka ho e bapala feela, ebe o e fetola ka morao. Ke fumane ho theosa le lilemo, ho sebetsa le DAW ho nepahetse empa ho nka nako haholo, e tlosang boikemelo le ts'usumetso ea sebopeho hanghang. Sena sohle se ipapisitse le hore na mekhoa ea hau ke efe, empa haeba u rata ho theha joale tweak, ke tla khothaletsa molaoli oa MIDI le/kapa keyboard ea MIDI e hlophiselitsoeng ho laola le ho rekota ho Sequarallel.Bongata ba litlhophiso tsa taolo ea MIDI ea Sequaralel li na le “ MIDI Ithute” moo u khethang ntho eo u lokelang ho e hlophisa, ebe u tobetsa konopo, pad, kapa CC controller ho e abela.

Sena se boloka nako e ngata haholo ho supa nomoro ea mohloli kapa ho fumana liphoso, ebe u e bala ka…Lentsoe le le leng la ho qetela ... PlayList! e ekelitsoe feela pherekanong. Ho pota-pota ka har'a lihlopha tsa li-blocks tse emelang tatellano ho ka 'na ha bonahala eka ha li lumellane ntle le sekhechana sa papali ea ho pota-pota, kapa bonyane ho boima. ke hore ho leka ho hokahanya ntho e 'ngoe le e' ngoe hore e be le libetsa hang-hang ho tloha kholomong e letšehali. Leha sena se le hantle, 'me ke se etsa, se ka siea libaka tse kholo ho grid e nang le boholo bo fokolang. Leqheka le leng leo ke le etsang ke ho tlatsa libaka tseo ka tatellano e khuts'oane, mohlomong ho fapana ha tse kaholimo, kahoo li ka khethoa ho bapala ka nako efe kapa efe.Mohopolo oohle ke ho khona ho fetola habonolo metsoako ea lipina le lipina tse ling ka ho li hlomella nako e loketseng, e fetohang e hlakileng ka mor'a boikoetliso bo itseng. Sena ha se khonehe habonolo Lenaneng la Lipapali le otlolohileng moo cursor ea mantlha e bapalang tsohle ka tlas'a eona. Molemo o mong ke hore litsela tse sa lebelloang li ka hlomelloa hore li kopane le tse ling, ka linako tse ling li hlahise liphello tse sa lebelloang.Sohle se boletsoeng, motho o na le khetho ea ho etsa hore sehlopha ka seng sa Track se be le boholo bo lekanang, ke hore, 16 bar, loop. Khetho eo e teng, 'me ka li-cursor tsohle li tsamaea hammoho, li tla tšoana le DAW PlayList e otlolohileng. ;) Ke tšepa hore u tla thabela ho etsa 'mino ho Sequaralel joalo ka ha ke etsa!

Litokomane / Lisebelisoa

SDS DIGITAL V14 Sequarallel Midi Ho isa CV-Gate-Velocity Midi Sequencer module [pdf] Bukana ea Mosebelisi V14 Sequarallel Midi Ho ea ho CV-Gate-Velocity Midi Sequencer Module, V14, Sequarallel, Midi Ho ea CV-Gate-Velocity Midi Sequencer Module

Litšupiso

• Bukana ea Mosebelisi