Litaba pata
1 Satel INT-KSG2R Integra Keypad e nang le linotlolo tsa ho ama
2 Tlhahisoleseding ya Sehlahiswa
3 Litaelo tsa Tšebeliso ea Sehlahisoa
4 Lipotso Tse Botsoang Hangata
5 Selelekela
6 Lipontšo tsa LED
7 Linotlolo
8 Ho sebelisa linotlolo tsa ho ama
9 Ho sebelisa karete ea haufi ea MIFARE®
10 Macro ditaelo
11 Senotlolo sa likonopo
12 Nalane ea ntlafatso ea matsoho
13 Litokomane / Lisebelisoa
13.1 Litšupiso

Satela-LOGO

Satel INT-KSG2R Integra Keypad e nang le linotlolo tsa ho ama

Satel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-PRODUCT

Tlhahisoleseding ya Sehlahiswa

Litlhaloso

  • Mohlala: INT-KSG2R EN
  • Mofuta oa Firmware: 2.03

Litaelo tsa Tšebeliso ea Sehlahisoa

Selelekela

Rea leboha ha u khethile konopo ea INT-KSG2R ka SATEL. Pele o sebelisa letlapa la likonopo, itloaetse bukana ea tataiso. Letlapa la likonopo le sebetsa ka linotlolo tsa ho thetsa le boitšisinyo.

Pontšo

Pontšo e fana ka tlhahisoleseling mabapi le boemo ba sistimi mme e o lumella ho sebetsa le ho hlophisa sistimi ea alamo. Pontšo e ka sebetsa maemong a standby, mokhoa oa tlhahiso ea boemo ba karohano, le mokhoa oa ho boloka skrine.

Linotlolo

Mesebetsi ea linotlolo e kenyelletsa ho thetsa ho kenya linomoro le ho ama le ho ts'oara metsotsoana e 3 ho lekola boemo ba libaka.

Lipotso Tse Botsoang Hangata

Q: Likhoutu tsa kamehla tsa feme bakeng sa konopo ea INT-KSG2R ke life?

A: Likhoutu tsa kamehla tsa feme ke Khoutu ea Ts'ebeletso: 12345 le Khoutu ea mosebelisi ea Object 1: 1111.

P: Nka fetola joang lipakeng tsa mefuta e fapaneng ea ponts'o ho keypad?

A: Ho chencha lipakeng tsa standby mode, partition state presentation mode, le screensaver mode, latela litaelo tse fanoeng bukeng ea mosebelisi kapa ikopanye le sehokelo sa hau.

  • BOHLOKOA  Liphetoho, litokiso, kapa litokiso tse sa lumelloang ke moetsi li tla hlakola litokelo tsa hau tlasa tiisetso.
  • Mona, SATEL sp. z oo e phatlalatsa hore mofuta oa lisebelisoa tsa seea-le-moea INT-KSG2R o lumellana le Directive 2014/53/EU. Temana e felletseng ea Phatlalatso ea Tumellano ea EU e fumaneha atereseng e latelang ea inthanete: www.satel.pl/ce

Likhoutu tsa kamehla tsa feme:

  • Khoutu ea tšebeletso: 12345
  • Object 1 master user user (motsamaisi) khoutu: 1111

Lipontšo bukeng ena

  • Satel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-1Tlhokomeliso - tlhahisoleseling mabapi le polokeho ea basebelisi, lisebelisoa, joalo-joalo.
  • Satel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-2Hlokomela - tlhahiso kapa lintlha tse ling.

Selelekela

  • Kea leboha ha u khethile sehlahisoa sena ka SATEL. Itloaetse bukana ena pele u qala ho sebelisa letlapa la likonopo. Bukana ena e hlalosa likarolo tsa letlapa la likonopo le likarolo tsa tsona.
  • Bakeng sa tlhaloso ea mokhoa oa ho sebelisa letlapa la likonopo bakeng sa ts'ebetso ea phanele ea taolo, ka kopo sheba bukana ea mosebelisi ea phanele ea taolo eo konopo e hoketsoeng ho eona.
  • Hopola hore letlapa lena la dikonopo le sebetswa ka dikonopo tsa ho thetsa le boitshisinyo (mohlala, ho swipella sebakeng sa ho tobetsa dikonopo tsa metsu).
  • Kopa motho ea kenyang litaelo tsa hore na u ka sebelisa letlapa la likonopo le hlophisitsoeng joang.
  • Sesebelisoa se boetse se lokela ho u laela hore na u ka sebelisa alamo joang u sebelisa konopo ea INT-KSG2R.Satel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-3

Lipontšo tsa LED

Satel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-4

  • Lintlha tse mabapi le boemo ba lihlomo li ka patoa ka mor'a nako e hlalositsoeng ke motho ea kenyang.
  • Litaba tsa mathata li patiloe ka mor'a ho hlomela. Sesebelisoa se hlalosa hore na tlhahisoleseling ea mathata e patiloe ka mor'a hore karolo e le 'ngoe feela ea likarolo e hlometse ka mokhoa ofe kapa ofe kapa ka mor'a hore likarolo tsohle li hlometse ka mokhoa o feletseng.

Haeba khetho ea Kereiti ea 2 (INTEGRA) / Kereiti ea 3 (INTEGRA Plus) e nolofalitsoe ke sehokelo:

  • theSatel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-5 LED e bonts'a lialamo feela kamora ho kenya khoutu,
  • ho benya haSatel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-6 LED e bolela hore ho na le mathata tsamaisong, libaka tse ling li fetisitsoe, kapa ho bile le alamo.

Pontšo

  • Pontšo e fana ka tlhahisoleseling mabapi le boemo ba sistimi mme e o lumella ho sebetsa le ho hlophisa sistimi ea alamo. Sesebelisoa se hlalosa litlhophiso tsa mabone a morao-rao.

Pontšo e ka sebetsa ka e 'ngoe ea mekhoa e latelang:

  • boemo ba standby (mokhoa oa ho sebetsa oa mantlha),
  • mokhoa oa tlhahiso ea boemo ba karohano,
  • mokhoa oa ho boloka skrine.
  • Sesebelisoa se etsa qeto ea hore na mokhoa oa tlhahiso ea boemo ba karohano le mokhoa oa ho boloka skrine lia fumaneha.
  • Melaetsa e mabapi le liketsahalo tse etsahetseng ho alamo e hlahisoa ho sa tsotelehe mokhoa oa ts'ebetso.
  • Kenya khoutu ebe o tobetsaSatel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-7 ho bula menyetla. Mesebetsi e hlahisoa ka mela e mene.
  • Mosebetsi o khethiloeng hajoale o totobalitsoe.

Boemo ba standby

Lintlha tse latelang li hlahisoa:

  • letsatsi le nako ka mokhoa o khethiloeng ke motho ea kenyang (mohala o ka holimo),
  • lebitso la keypad kapa boemo ba li-partitions tse khethiloeng ke setsi (mohala o ka tlase),
  • mabitso a lihlopha tsa litaelo tse kholo ka holim'a linotlolo (haeba sehlomathisi se lokiselitse litaelo tsa macro).
  • TšoaraSatel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-8 bakeng sa metsotsoana e 3 ho fetohela ho mokhoa oa tlhahiso ea boemo ba karohano.
  • Tobetsa ho qala skrini.

Mokhoa oa tlhahiso ea boemo ba karohano

Lintlha tse latelang li hlahisoa:

  • matšoao a bontšang boemo ba likaroloana tse sebelisoang ke keypad,
  • mabitso a lihlopha tsa litaelo tse kholo ka holim'a linotlolo (haeba sehlomathisi se lokiselitse litaelo tsa macro).
  • TšoaraSatel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-8 bakeng sa metsotsoana e 3 ho fetohela boemong ba standby.
  • Ha letlapa la dikonopo le sebetsa ka mokgwa wa tlhahiso ya boemo ba karohano, screensaver ha e fumanehe (ha e kgone ho qalwa ka bowena kapa ka boiketsetso).

Mokhoa oa ho boloka skrine

  • Ha pontsho e sebetsa boemong ba standby, screensaver e ka qalwa.
  • ka bohona (kamora metsotsoana e 60 ea ho se sebetse),
  • ka letsoho (touchSatel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-7 ).
  • Sesebelisoa se hlalosa lintho tse lokelang ho hlahisoa ka mokhoa oa skrine.

Sena e ka ba:

  • mongolo ofe kapa ofe,
  • boemo ba li-partitions tse khethiloeng (matšoao),
  • boemo ba libaka tse khethiloeng (matšoao kapa melaetsa),
  • boemo ba liphetho tse khethiloeng (matšoao kapa melaetsa),
  • tlhahisoleseling ka mocheso o tsoang ho sesebelisoa se se nang mohala sa ABAX / ABAX 2,
  • letsatsi,
  • nako,
  • lebitso la keypad,
  • tlhahisoleseling mabapi le tšebeliso ea matla ea sesebelisoa se hoketsoeng ho plug e bohlale ea ASW-200.
  • ThetsaSatel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-7 ho emisa skrineng.

Linotlolo

Satel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-9 Satel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-10

  • Ho ba teng ha ditshebetso ho itshetlehile hodima di-setting tsa letlapa la dikonopo.
  • Mesebetsi ea linotlolo ho menu ea mosebedisi e hlalositsoe ho INTEGRA / INTEGRA Plus control panel user manual.

Ho sebelisa linotlolo tsa ho ama

Sebelisa boitšisinyo bo hlalositsoeng ka tlase.

Thetsa

Tšoara senotlolo ka monoana.Satel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-11

Tšoara 'me u tšoare

Thetsa konopo 'me u tšoare metsotsoana e 3.Satel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-12

Swaepela holimo

  • Thetsa sebaka sa linotlolo 'me u thellele monoana ho eona.
  • tsamaisa lenane,
  • tsamaisa cursor holimo kapa ka ho le letšehali (ho latela ts'ebetso),
  • hlakola sebapali ka letsohong le letšehali la sesupa ha u hlophisa,
  • ebe o tsoa ho mokhoa oa graphic.Satel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-13

Swaepela tlase

  • Thetsa sebaka sa linotlolo 'me u thellele monoana oa hau fatše.
  • tsamaisetsa tlase lethathamong,
  • suthisa sesupa fatshe,
  • fetola lengolo la lengolo ha u hlophisa,
  • tsoa ho mokhoa oa litšoantšo.Satel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-14

Swaepa ka ho le letona

  • Thetsa sebaka sa linotlolo 'me u thellele monoana oa hau ho eona.
  • kenya submenu,
  • qala mosebetsi,
  • tsamaisa khesa ka ho le letona,
  • kenya mokhoa oa litšoantšo.Satel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-15.

Swaepela ka ho le letshehadi

  • Thetsa sebaka sa linotlolo 'me u tsamaise monoana oa hau ho le letšehali ho.
  • tsoa ho submenu,
  • suthisa khesa ka ho le letšehali,
  • kenya mokhoa oa litšoantšo.Satel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-16

Ho sebelisa karete ea haufi ea MIFARE®

  • U ka sebelisa MIFARE® proximity card ho sebelisa alamo. Letlapa la dikonopo le kgetholla pakeng tsa ho hlahisa le ho tshwara karete (karete e lokela ho hlahiswa letlapeng la dikonopo mme e tshwarelwe metsotswana e 3).
  • Botsa motho ea kenyang hore na ke ts'ebetso efe e qalisoang ha u hlahisa karete le hore na ke ts'ebetso efe e qalisoang ha u tšoere karete. 'Mali o fumaneha joalokaha ho bontšitsoe setšoantšong se ka tlase.Satel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-17
  • Ka mabaka a ts'ireletso, re khothaletsa ho sebelisa likarete tsa DESFire tse nang le linomoro tsa likarete tse patiloeng. Ho ngola linomoro tse patiloeng likareteng, ho hlokahala moqapi oa SO-PRG le lenaneo la CR SOFT ka SATEL.
  • Haeba nomoro ea serial ea karete ea karete (CSN) e sebelisoa e le nomoro ea karete, ha ho hlokahale ho hlophisa karete empa karete e joalo ha e sireletsehe khahlanong le ho kopitsa.

Macro ditaelo

  • Taelo ea macro ke tatellano ea liketso tse lokelang ho etsoa ke sehlopha sa taolo. Litaelo tse kholo li etsa hore ho be bonolo ho sebelisa sistimi ea alamo. Sebakeng sa ho etsa lits'ebetso tse 'maloa (mohlala, ho hlomella likarolo tse khethiloeng) o ka tsamaisa taelo e kholo, mme karolo ea taolo e tla etsa mesebetsi e abetsoeng taelo e kholo. Buisana le motho ea kenyang hore na ke litaelo life tse kholo tse ka u thusang hamolemo ts'ebelisong ea hau ea letsatsi le letsatsi ea alamo.
  • Sesebelisoa se ka hlophisa lihlopha tse ka bang 4 tsa litaelo tse kholo. Litaelo tse 16 tse kholo li ka abeloa sehlopha ka seng. Letlapa la likonopo le na le linotlolo tse 4— tse sebelisoang ho tsamaisa litaelo tse kholo. Lebitso la sehlopha le bontshwa ka hodima senotlolo.

Ho tsamaisa taelo e kholo

  1. Ama-. Lenane la litaelo tse kholo tsa sehlopha sena le tla hlahisoa.
  2. Swaepela tlase ho fumana taelo e kholo eo u batlang ho e sebelisa. Taelo ea macro e khethiloeng hajoale e totobalitsoe.
  3. ThetsaSatel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-18 ho tsamaisa taelo e kholo e khethiloeng.
    • Sesebelisoa se ka abela sehlopha taelo e le 'ngoe feela ea macro e tla tsamaisoa ka kotloloho ha e ama-.

Senotlolo sa likonopo

  1. ThetsaSatel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-19 ebeSatel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-20 ho notlela linotlolo tsa ho thetsa. Ha linotlolo tsa ho ama li notletsoe, u ka hloekisa letlapa la likonopo ntle le kotsi ea ho qala tšebetso ka phoso.
  2. ThetsaSatel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-19bonaSatel-INT-KSG2R-Integra-Keypad-with-Touch-Keys-FIG-20ho notlolla linotlolo tsa ho thetsa.

Nalane ea ntlafatso ea matsoho

  • Phetolelo ea tataiso e hlahisitse liphetoho
    • 04/24 • Karolo e mabapi le ho sebelisa likarete tsa MIFARE e kentsoe
  • SATEL sp. z oo
  • ul. Budowlanych 66
  • 80-298 Gdańsk
  • POLAND
  • Mohala. +48 58 320 94 00
  • www.satel.pl

Litokomane / Lisebelisoa

Satel INT-KSG2R Integra Keypad e nang le linotlolo tsa ho ama [pdf] Bukana ea Mosebelisi
INT-KSG2R Integra Keypad e nang le linotlolo tsa ho ama, INT-KSG2R, Integra Keypad e nang le linotlolo tsa ho ama, senotlolo se nang le linotlolo tsa ho ama, linotlolo tsa ho ama.

Litšupiso

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *