Rayprus CSV26 AI Bukana ea Taelo ea Khamera

CSV26 AI Sensing Khamera

“

Tlhahisoleseding ya Sehlahiswa

Litlhaloso

• Sensor Properties
  • Mohlala oa Sensor: IMX500
  • Mofuta oa Shutter: Shutter e potolohang
  • Boholo ba Sensor: 1/2.3 (Boemo. 7.857mm)
  • Qeto: 12.33 MP, 4056 x 3040px
  • Boholo ba Pixel: 1.55 μm
• Thepa ea Molaoli
  • Controller Module: ESP32-MOTSAMAI-E
  • Motlakase: RAM 520KB on-chip SRAM, 8MB
    PSRAM
  • Polokelo: 16MB SPI flash
• Thepa ea 'Mele
  • Boholo: 55mm X 40mm X 35mm (ntle le lense
    protrusion)
  • Thaba ea Lense: S-Mount
  • Boima ba 'mele: 48 g
  • Bolelele ba sebaka: 4.35 limilimithara
  • Focus Type: Tsepamiso e Tsitsitseng (E tsepamisitse maikutlo ho 2m*)
    *ts'ebetso e fapana ho latela ts'ebeliso
  • Tšimo ea View (D x H x V): 85.5° x 71.6° x
    56.8°
  • Sekoti: F3.0
  • Phetolo: Optical khopamisa TV
    Phetolo

Litaelo tsa Tšebeliso ea Sehlahisoa

Tlhophiso ea Khokahano

1. PoE Hub le LAN Cable Setup:
   • Reka setsi sa PoE se nang le sebopeho sa 100BASE-T RJ45 se loketseng
     CSV26.
   • Lokisetsa thapo e loketseng ea LAN bakeng sa ho hokela.
2. Thepa ea ho Lokisa Khamera:
   • CSV26 e na le lesoba la screw e kentsoeng ka makhetlo a mararo ka tlase ho
     lehlakore le ka morao.
   • Lokisa tripod kapa fixture ho seta khamera ka mokhoa o sireletsehileng.
3. Likhoutu tsa QR:
   • DEVICE INFO QR Code e na le lintlha tsa khokahano ea marang-rang bakeng sa
     tšebeliso ea router ea LAN e se nang mohala.
   • Khamera QR Code e na le lintlha tsa AID-UUID ea sesebelisoa.

Lipotso tse atisang ho botsoa (FAQ)

P: Nka fumana lintlha tse qaqileng hokae ka AITRIOS
tšebeletso?

A: Etela Sebaka sa Moetsi ho https://developer.aitrios.sony-semicon.com/en/edge-ai-sensing/

"`

Motsoako oa Rayprus
AI Sensing Khamera
CSV26
Mabapi le Bukana
Datasheet (tokomane ena) e hlalosa mabitso le mesebetsi ea likarolo le litsamaiso tsa yuniti le ho hlalosa mokhoa oa ho theha yuniti. Ka kopo, etsa bonnete ba hore u e bala pele u sebetsa yuniti ena. Sheba Sebaka sa Moqapi bakeng sa lintlha tse qaqileng mabapi le tšebeletso ea AITRIOS. https://developer.aitrios.sony-semicon.com/en/edge-ai-sensing/
Khokahano
1. Mabapi le li-hubs tsa PoE, lithapo tsa LAN, le lisebelisoa tse tsitsitseng, ka kopo reka lisebelisoa tse finyellang maemo a latelang ka thoko.
2. PoE hub - Mofuta oa sebopeho sa CSV26 ke 100BASE-T RJ45, PoE. Lokisetsa li-hubs tse loketseng tsa PoE, le thapo ea LAN bakeng sa ho hokela.
3. Ha u sebelisa thepa e tsitsitseng, lokisetsa thepa ka 'ngoe e finyellang litlhoko tse latelang. Thepa ea ho Lokisa Khamera -CSV26 e na le lesoba la screw mounting tripod ka tlase lehlakoreng le ka morao(e), kahoo lokisetsa tripod kapa fixture ho seta.
4. LITLHAKISO TSA SESEBETSI QR Code - E na le tlhahisoleseding ea khokahanyo ea marang-rang ha u sebelisa sesebelisoa e le router ea LAN e se nang mohala.
5. Khoutu ea QR ea Khamera - E na le tlhaiso-leseling ea sesebelisoa sa AID-UUID.

Litlhaloso

Sensor Properties

Mohlala oa Sensor

IMX500

Mofuta oa Shutter

Shutter e potolohang

Boholo ba kutlo

1/2.3″ (Boemo. 7.857mm)

Qeto

12.33 MP, 4056 x 3040px

Boholo ba Pixel

1.55 m

Thepa ea Molaoli

Controller Module ESP32-WROVER-E

processor

Li-microprocessor tse peli tsa Xtensa® 32-bit LX6 tse nang le matla a tlase

RAM

520KB on-chip SRAM, 8MB PSRAM

Polokelo

16MB SPI flash

Thepa ea 'Mele

Litekanyo

55mm X 40mm X 35mm (ha e kenyeletse protrusion ea lense)

Thaba ea Lense

S-Mount

Boima ba 'mele

48 g

Bolelele ba tsepamiso

4.35 limilimithara

Mofuta oa Tsepamiso

Tsepamiso e Tsitsitseng (E tsepamisitsoe ho 2m*) *ts'ebetso e fapana ho latela ts'ebeliso

Tšimo ea View (D x H x V) 85.5x 71.6x 56.8

Sekoti

F3.0

Phetolo

Optical sotha TV Khothalletsa

<-1.55% <-0.62%

Interface le Boitsebiso ba Matla

Digital Interface

100BASE-T RJ45,PoE

PoE ea Tlhokahalo ea Matla (IEEE 802.3af)

Tšebeliso ea Matla Typ.1.5W Max. 3W

Standard le Certifications

Ho latela melao

CE, IC, FCC, MIC, ETL, RoHS

Mocheso oa polokelo -30 ho isa ho 60

Mocheso o sebetsang -10 ho isa ho 40 ambient

Mongobo

Ts'ebetso: 20% ~ 80%, e amanang le eona, e sa fokotseng

Sebaka le Mosebetsi oa Likarolo

(a) (b) (c)

(f) (e)

Mabone a Pontshi ea Boemo

(a) Lesupa la Matla

(b) Botjha / Konopo ya Mokgwa (c) Letshwao la Ditshebeletso (d) Ethernet RJ45

(e) Lesoba la screw mounting tripod (f) (g) Lesoba la likurufu tse peli sekoahelong se ka morao

(d) (g)

Likoti tse hukung li reretsoe ho hokela Security/Fall Prevention Wire.

Ha u sebelisa likoti tse hukung li reretsoe ho hokela terata ea ts'ireletso / ho oa.

Leibole le maemo 1.DEVICE INFO QR Code:
Ha u skena khoutu ea QR ea Info ka Sesebelisoa, ho theoa khokahano ea LAN e se nang mohala lipakeng tsa Sesebelisoa sa Sesebelisoa le Sesebelisoa sa Edge. Ka kopo, sheba Tataiso ea ho Seta Sesebediswa bakeng sa lintlha tse ling.

Sehlomathiso A: Litšoantšo tsa Mechini

2.AID-UUID QR Code: Setsebi sa Sesebelisoa sena sa Edge se sebelisetsoang ho kopa setifikeiti sa sesebelisoa sa sona kapa ho se ngolisa tšebeletsong ea AITRIOS.

Haeba khoutu ea QR ea Khamera e silafetse kapa e hahiloe, u kanna oa sitoa ho e skena. Tabeng ena, hlahloba AID-UUID e ngotsoeng sesebelisoa.

3. Leibole ea lebokose:

Litokomane / Lisebelisoa

Rayprus CSV26 AI Sensing Khamera [pdf] Buka ea Taelo CSV26, CSV26 AI Sensing Camera, AI Sensing Camera, Sensing Camera, Khamera

Litšupiso

• Bukana ea Mosebelisi