Rayprus CSV26 AI Sensing Camera Instruction Manual

CSV26 AI Sensing Camera

“

Product Information

Specifications

• Sensor Properties
  • Sensor Model: IMX500
  • Shutter Type: Rolling shutter
  • Sensor Size: 1/2.3 (Diag. 7.857mm)
  • Resolution: 12.33 MP, 4056 x 3040px
  • Pixel Size: 1.55 μm
• Controller Properties
  • Controller Module: ESP32-WROVER-E
  • Processor: RAM 520KB on-chip SRAM, 8MB
    PSRAM
  • Storage: 16MB SPI flash
• Physical Properties
  • Dimensions: 55mm X 40mm X 35mm (excludes lens
    protrusion)
  • Lens Mount: S-Mount
  • Weight: 48 g
  • Focal length: 4.35mm
  • Focus Type: Fixed Focus (Focused at 2m*)
    *performance varies depending on application
  • Field of View (D x H x V): 85.5° x 71.6° x
    56.8°
  • Aperture: F3.0
  • Distortion: Optical distortion TV
    Distortion

Product Usage Instructions

Connection Setup

1. PoE Hub and LAN Cable Setup:
   • Purchase a PoE hub with a 100BASE-T RJ45 interface suitable for
     CSV26.
   • Prepare an appropriate LAN cable for connecting.
2. Camera Fixing Equipment:
   • The CSV26 has a tripod mounting screw hole on the bottom of the
     rear side.
   • Prepare a tripod or fixture to set up the camera securely.
3. QR Codes:
   • DEVICE INFO QR Code contains network connection information for
     wireless LAN router usage.
   • Camera QR Code contains device AID-UUID information.

Frequently Asked Questions (FAQ)

Q: Where can I find detailed information about the AITRIOS
service?

A: Visit the Developer Site at https://developer.aitrios.sony-semicon.com/en/edge-ai-sensing/

“`

Rayprus
AI Sensing Camera
CSV26
About the Manual
Datasheet (this document) defines the names and functions of the parts and controls of the unit and explains how to set up the unit. Please be sure to read it before operating this unit. See the Developer Site for the detailed information about the AITRIOS service. https://developer.aitrios.sony-semicon.com/en/edge-ai-sensing/
Connection
1. Regarding PoE hubs, LAN cables, and fixed equipment, please purchase equipment that meets the following conditions separately.
2. PoE hub – The interface type of CSV26 is 100BASE-T RJ45, PoE. Prepare an appropriate PoE hubs, and LAN cable for connecting.
3. When using fixed equipment, prepare each equipment that meets the following requirements. Camera Fixing Equipment -The CSV26 has tripod mounting screw hole on the bottom of rear side(e), so prepare tripod or a fixture to set-up.
4. DEVICE INFO QR Code – Contains network connection information when using the device as a wireless LAN router.
5. Camera QR Code – Contains device AID-UUID information.

Specifications

Sensor Properties

Sensor Model

IMX500

Shutter Type

Rolling shutter

Sensor Size

1/2.3″ (Diag. 7.857mm)

Resolution

12.33 MP, 4056 x 3040px

Pixel Size

1.55 m

Controller Properties

Controller Module ESP32-WROVER-E

Processor

Two low-power Xtensa® 32-bit LX6 microprocessors

RAM

520KB on-chip SRAM, 8MB PSRAM

Storage

16MB SPI flash

Physical Properties

Dimensions

55mm X 40mm X 35mm (excludes lens protrusion)

Lens Mount

S-Mount

Weight

48 g

Focal length

4.35mm

Focus Type

Fixed Focus (Focused at 2m*) *performance varies depending on application

Field of View (D x H x V) 85.5x 71.6x 56.8

Aperture

F3.0

Distortion

Optical distortion TV Distortion

<-1.55% <-0.62%

Interface and Power Information

Digital Interface

100BASE-T RJ45,PoE

Power Requirement PoE (IEEE 802.3af)

Power Consumption Typ.1.5W Max. 3W

Standard and Certifications

Compliance

CE, IC, FCC, MIC, ETL, RoHS

Storage Temperature -30 to 60

Operating Temperature -10 to 40 ambient

Humidity

Operating:20%~80%, relative, non-condensing

Location and Function of Parts

(a) (b) (c)

(f) (e)

Status Indicator Lights

(a) Power Indicator

(b) Reset / Mode Button (c) Services Indicator (d) Ethernet RJ45

(e) Tripod mounting screw hole (f) (g) Two screws hole on the back cover

(d) (g)

Holes on the corner are intended to attach Security/Fall Prevention Wire.

When using holes on the corner are intended to attach security/fall prevention wire.

Label and positions 1.DEVICE INFO QR Code:
When you scan the Device Info QR code with Device Installer, a wireless LAN connection is established between Device Installer and the Edge Device. Please refer to Device Setup Guide for details.

Appendix A: Mechanical Drawings

2.AID-UUID QR Code: Identifier of this Edge Device which is used to request for its device certificate or to register it to AITRIOS service.

If the Camera QR code is dirty or scratched, you may not be able to scan it. In this case, check the AID-UUID written on the device.

3.Carton label:

Documents / Resources

Rayprus CSV26 AI Sensing Camera [pdf] Instruction Manual CSV26, CSV26 AI Sensing Camera, AI Sensing Camera, Sensing Camera, Camera

References

• User Manual