RadioLink T8FB 8-Channel Remote Controller Manual

• Ka kopo hlokomela hore bukana ena e tla nchafatsoa khafetsa 'me ka kopo etela ofisiri ea RadioLink websaete ea ho jarolla mofuta oa moraorao:www.radiolink.com
  

Kea leboha ha u rekile remoutu ea RadioLink 8-channel T8FB.

Ho thabela melemo ea sehlahisoa sena ka botlalo le ho netefatsa polokeho, ka kopo bala bukana ka hloko 'me u hlophise sesebelisoa joalo ka mehato e laetsoeng.
Haeba ho na le mathata a fumanoeng nakong ea ts'ebetso, mokhoa o mong le o mong o ka tlase o ka sebelisoa e le ts'ehetso ea mahlale a inthaneteng.

1. Romela mangolo ho after_service@radiolink.com.cn mme re tla araba potso ya hao qalong.
2. Romela molaetsa ho rona leqepheng la rona la Facebook kapa u siee litlhaloso leqepheng la rona la YouTube
3. Haeba u rekiloe ho tsoa ho morekisi ea amohetsoeng kapa morekisi, u ka ikopanya le bona ka kotloloho bakeng sa ts'ehetso. Litaelo tsohle le li-firmware li fumaneha ho semmuso sa RadioLink websaete sa www.radiolink.com le lithuto tse ling lia kenngwa. Kapa u latele leqephe la rona la Facebook le YouTube ho lula u mametse litaba tsa rona tsa morao-rao.

TS'IRELETSO MATS'ELI

• Le ka mohla u se ke ua sebetsa mehlala nakong ea maemo a leholimo a mabe. Ho se bonahale hantle ho ka baka pherekano le tahlehelo ea taolo ea mohlala oa bafofisi ba lifofane.
• Le ka mohla u se sebelise sehlahisoa sena ka har'a letšoele kapa libakeng tse seng molaong.
• Kamehla hlahloba li-servos tsohle le likhokahano tsa tsona pele ho ts'ebetso e 'ngoe le e' ngoe.
• Etsa bonnete ba hore o tima moamoheli pele o fetisa.
• Ho netefatsa puisano e ntle ka ho fetesisa ea radio, ka kopo natefeloa ke ho fofa / ho khanna sebakeng ntle le tšitiso e joalo ka vol voltage cable, seteishene sa puisano kapa tora ea ho qala.

TLHOKOMELO

Sehlahisoa sena ha se ntho ea ho bapala ebile HA SE tšoanele bana ba ka tlase ho lilemo tse 14. Batho ba baholo ba lokela ho boloka sehlahisoa seo bana ba sa se fihleleng mme ba be hlokolosi ha ba sebetsa sehlahisoa sena moo bana ba leng teng. Le ka mohla u se ke ua sebelisa mohlala oa hau nakong ea maemo a leholimo a mabe. Metsi kapa mongobo o ka kenya se fetisang kahare ka likheo ka har'a lenakana kapa ka thabo 'me sa baka ho se tsitse ha mohlala, esita le ho tsoa taolong. Haeba ho matha maemong a leholimo a mongobo (joaloka papali) ho ke ke ha qojoa, sebelisa mekotla ea polasetiki kamehla kapa lesela le sa keneleng metsi ho koahela transmitter. Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

Sesebediswa sena se ke ke sa baka tshitiso e kotsi, hape se thibela tshitiso ya kantle ho waelese, ho kenyeletswa le tshitiso e ka bakang tshebetso e sa batleheng.

Liphetoho life kapa life tse sa amoheloeng ka kotloloho ke mokha o ikarabellang bakeng sa tumellano li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.

Selelekela

Joaloka setšoantšo sa T8FB (Mokhoa oa 2) o bonts'itsoeng ka tlase, ho na le switch e le 'ngoe ea litsela tse tharo, switch e le' ngoe ea litsela tse tharo, li-switch tse peli tsa VR, likonopo tse 'nè tsa ho kuta le lintho tse peli tsa thabo. Mokhoa o ka etsoa ka mokhoa oa motho ka mong ho 1 (throttle ka letsohong le letona) kapa 2 (throttle ka letsohong le letšehali) kapa lithupa ka bobeli li khutlela lintlheng tse bohareng ka lisebelisoa tse nyane tse pakiloeng ka mokotleng.

Ho beha fektheri ka boiketsetso: SwB ke CH5, VrB ke CH6, SwA ke CH7 le VrA ke CH8.

Sehokelo sa betri sa Universal JST se tšehetsa libeteri tse ngata, ho kenyeletsoa libeteri tsa 4pcs AA kapa 2S/3S/4S LiPo betri. Alamo ea kamehla ea betri e tlase haholotagE e tla ipehela ka tsela e iketsang ho latela betri e sebelisitsoeng. Kapa bafofisi ba lifofane ba ka iketsetsa boleng ba alamo ka mobile APP kapa software ea khomphutha.

Hlokomela Mekhahlelo ea liteishene tsa 4 e ka fetoloa habonolo ka ho hlahisa li-switches tsa mekhahlelo e lumellanang ho e-na le ho fetola lintlha tsa parameter ho software / APP.

1. Palo ea Lefatše
2. Null
3. MoqtagKeletso: 7.4-15V
4. Sephetho: PPM
5. Keletso: RSS

Setting ea Motheo ea T8FB

Baamoheli

Moamoheli o tloaelehileng o pakiloeng ka T8FB ke R8EF, moamoheli oa kanane o 8 o nang le PWM le tlhahiso ea lets'oao la SBUS/PPM e tšehelitsoeng.

Mokhoa oa ho Sebetsa oa Pontšo

1. Mokhoa oa ho sebetsa oa PWM:
   Letšoao la moamoheli ke RED le liteishene tsohle tse 8 tse hlahisoang ke lets'oao la PWM.
   
2. Mokhoa oa ho sebetsa oa SBUS / PPM
   Letšoao la moamoheli ke Boputsoa (Purple) le liteishene tse 8 ka kakaretso. Channel 1 ke lets'oao la SBUS, lets'oao la 2 PPM le kanale ea 3 ho isa ho 8 PWM.
   

Signal Switjha pakeng tsa SBUS & PPM le PWM

Tobetsa konopo e kgutshwane ya seamohedi habedi nakong ya motsotswana o le mong ho chencha letshwao la SBUS / PPM ho letshwao la PWM.

Tlamo

Mochine o mong le o mong o na le khoutu e ikhethang ea ID. Pele o sebelisa, o tlameha ho fetisetsa sehokelo ho moamoheli ka sefofaneng. Ha e qetile ho tlama, khoutu ea ID e tla bolokoa ho moamoheli, ha ho hlokahale hore u khalemele, ntle le haeba seamoheli se tla sebetsa le se fetisang se seng. Haeba seamohedi se secha se lumellanang se rekiloe, tlamo e hloka ho etsoa pele e sebelisoa.

Mehato e tlamang ea li-transmitter tsohle le li-receiver tse tsoang RadioLink li ts'oana le tse latelang:

1. Kenya sehatisi le seamoheli haufi le tse ling (tse ka bang lisentimitara tse 50) le matla ka bobeli.
2. Bulela se fetisang mme LED ho R8EF e tla qala ho benya butle.
3. Ho na le konopo e ntšo e tlamang (ID SET) ka lehlakoreng la moamoheli. Tobetsa konopo ho fihlela LED e bonesa kapele 'me e lokolloe, ho bolelang hore ts'ebetso e tlamang e ntse e tsoela pele.
4. Ha LED e emisa ho bonesa 'me e lula e le teng, ho tlama ho phethehile. Haeba e sa atlehe, LED e tla lula e benya butle ho tsebisa, ho pheta mehato e kaholimo.

Tlhokomeliso ea tšebeliso ea seamohedi

1. Boloka li-antenna ka kotloloho kamoo ho ka khonehang, kapa taolo e sebetsang ea taolo e tla fokotseha.
2. Mefuta e meholo e ka ba le likarolo tsa tšepe tse susumetsang ho tsoa ha lets'oao. Maemong ana, li-antenna li lokela ho beoa ka mahlakore ka bobeli a mohlala ho netefatsa maemo a matle ho fetisisa maemong ohle.
3. Li-Antennas li lokela ho beoa hole le mokhanni oa tšepe le khalase ea khabone bonyane halofo ea lisenthimithara mme ho se kobehe hofeta.
4. Boloka li-antenna hole le enjene, ESC kapa mehloli e meng ea tšitiso.
5. Seponche kapa lisebelisoa tsa foam li eletsoa ho sebelisa ho thibela ho thothomela ha o kenya seamohedi.
6. Seamohedi se na le likarolo tse ling tsa elektroniki tse phahameng haholo. E-ba hlokolosi ho qoba ho thothomela ho matla le mocheso o phahameng.
7. Ho sebelisoa lisebelisoa tse khethehileng tse fanang ka bopaki ba thothomelo bakeng sa R ​​/ C joalo ka foam kapa lesela la rabara ho sireletsa moamoheli. Ho boloka seamohedi ka mokotleng o tiisitsoeng hantle oa polasetiki ho ka qoba mongobo le lerōle, tse ka etsang hore seamoheli se tsoe taolong.

Setšoantšo sa T8FB

Tobetsa ho kuta sepolanka ka letsohong le letšehali ebe u bulela se fetisang ka nako e le 'ngoe. Ha sesebelisoa se tima, fapoha lithupa ka bobeli ntlheng e bohareng. Ebe o tobetsa konopo ea ho laola sepolanka ka letsohong le letšehali le konopo ea motlakase ka nako e le 'ngoe, LED e khubelu le e tala e tla qala ho benya mme T8FB e ikemiselitse ho lekanngoa ..

Range Calibration: Fetola lithupa ka bobeli (Ch1-4) ho ea boemong bo phahameng / bo phahameng le ho ntlha e tlase / tlase. Ebe o khutlela ntlheng ea bohareng. (Sheba setšoantšo se ka tlase)

Tekanyo ea Ntlha e Bohareng: Ha lithutsoana li se li khutletse ntlheng e bohareng, tobetsa seporo se khelosang ka ho le letona, ebe LED e khubelu le e tala e lula e sebelisoa ka katleho. Ebe u tima T8FB ebe u e fa matla hape.

Ntlafatso ea Firmware

T8FB e ka ntlafatsoa ka mesebetsi ea morao-rao e ekelitsoeng, e ntse e tsoela pele joalo ka kamehla.
Ts'ebetso ea backup ea data e etsa hore khopi e kholo e khonehe, esita le mofuta o tšoanang o ka kopitsa data ka kotloloho. Beha mekhahlelo hang, kopitsa ka boiketlo! Kaofela file ka lisebelisoa tsohle tse hlokahalang u ka khoasolla ho
https://www.radiolink.com/t8fb_bt_firmwares

1. Kemiso ea Bakhanni: Latela mehato e ho PDF file ebe o kenya mokhanni.
   
2. Hokela T8FB komporong ka thapo ea USB ea android ea phetiso ea data (eseng ts'ebetso ea ho tjhaja feela).
3. Bula software ho ntlafatsa firmware ea T8FB ebe u khetha boema-kepe bo nepahetseng ba COM.
   
4. Tobetsa CONNECT ebe o tobetsa konopo ea matla hang ka nako ea motsotsoana o le mong. Ha "DISCONNECT" ka RED e fetohela ho "CONNECT" ka GREN, ho bolela hore e amana le katleho.
   
   
5. Tobetsa APROM ebe u khetha firmware ea morao-rao e jarollotsoeng ho https://www.radiolink.com/t8fb_bt_firmwares
   • Firmware ea kamehla ea feme ea T8FB ke ea morao-rao. Mme firmware e tla ntlafatsoa khafetsa mme e fumanehe ho RadioLink websebaka.
6. Tobetsa "QALA" 'me bareng ea tšebetso e ba TSOHLE. Ha bareng e tala e ea qetellong mme e bonts'a PASS, firmware e ntlafatsoa ka katleho.
   

Ho theha Paramethara ka Mobile APP

Ho kenya APP

Android APP: Etela https://www.radiolink.com/t8fb_bt_app ho jarolla sesebelisoa sa android ho seta mekhahlelo ea T8FB ka khokelo ea Bluetooth.

Apple App: Batla radiolink lebenkeleng la Apple 'me u khoasolle.

Ho fapana le Apple App ea hajoale, Android APP ea hajoale e na le litsamaiso tse ling tse peli tse kopantsoeng tse ka hlophisoang, Throttle Curve le menyetla ea ho seta parameter ea DR Curve le RSSI / Model Vol e ikhethileng.tagalamo.

• Li-APP tsa morao-rao tse nang le mesebetsi e mecha li tla ntlafatsoa khafetsa, ka kopo lula u sebelisa mofuta ona https://www.radiolink.com/T8FB_apps e le tsa morao-rao.

Khokahano ea APP

Khokahano ea bobeli ba APP ea Apple le Apple APP ho T8FB li ts'oana le tse ka tlase:

1. Ha ho hlongoa ha parameter setup APP ho phethiloe, tobetsa konopo ea matla ho bula T8FB.
2. Tobetsa ho kenya APP, molaetsa o tla hlaha ho kopa tumello ea ho bulela ts'ebetso ea Bluetooth.
3. Tobetsa Hokela kaholimo ho leqeleng la parameter setup, lenane la lisebelisoa le tla tsoa bakeng sa khetho.
4. Khetha sesebelisoa sa RadioLink, lits'oants'o tse peli tsa LED ka ho le letona li tla bonesa ka melumo ea DD.
   
5. Tobetsa konopo efe kapa efe ea ho kuta ho emisa melumo ea DD mme servo range e tla hlaha ho APP, ho bolelang hore khokahano lipakeng tsa APP le T8FB e atleha.
   • Haeba e hloleha, ka kopo pheta mehato e kaholimo ho leka hape.

Menyu ea Setha ea Paramente

Litlhophiso tsa parameter tsa bobeli ba APP ea Apple le Apple APP li ts'oana le tse ka tlase: Ho na le linotlolo tsa ts'ebetso tse 6 kaholimo ho sebopeho sa paramethara sa ho seta.

(DIS) Hokela: Ha APP e buloa mohaleng oa thekeng mme T8FB e buletsoe motlakase, tlanya Hokela mme lenane la lisebelisoa tsa Bluetooth le tla tsoa ebe le khetha sesebelisoa sa RadioLink ho hokahanya. Tse peli tse ka letsohong le letona li tla benya ka melumo ea DD, tobetsa efe kapa efe ea likonopo trimmer ho emisa DD melumo mme sebaka sa servo se tla hlaha ho APP. Haeba e hloleha, tobetsa DISCONNECT ebe CONNNECT hape.
BALA: Tobetsa BALA, melumo e 'meli e khuts'oane ea D e tla utluoa mme APP e qala ho bala data ho T8FB. Lintlha tsa hajoale tsa T8FB li ke ke tsa hlahisoa ho APP ho fihlela u tobetsa BALA.
NGOLA: Tobetsa ho ntlafatsa lintlha tse fetotsoeng ho T8FB mme melumo e 'meli e liehang ea D e bolela hore data e fetotsoeng e ngotsoe ka T8FB. Haeba ho se modumo oa D o bolelang hore o hloleha ho ntlafatsa, ka kopo hokela hape T8FB ho App ebe u ngola hape. Tobetsa WRITE nako le nako ha paramethara e fetoloa ho netefatsa hore e kenya hantle ho T8FB.
LEBENKELE: Tobetsa ho boloka data ea APP e le file mohaleng.
MORALO: Tobetsa LOAD 'me ho tla hlaha 'Model Select' 'me mosebelisi a ka etsa e ncha file kapa kgetha hara tse bolokilweng files.
HAUFI: Tobetsa CLOSE ho tsoa.

Ho na le liparamente tse ling tse 4 tse bonts'ang haufi le SYSTEM : Lintlha tsa mohlala li khethiloe / T8FB voltage (TX) / RSSI / Mohlala voltage(EXT, e sebetsa feela le baamoheli ba RadioLink ba tšebetso ea telemetry R7FG kapa R8F).

Methati e Behang Mehato le Meetso e mengata ea polokelo ea data

• Ha liparamente li hloka ho fetoloa, tobetsa BALA pele ho kenya data ea mantlha ho tloha T8FB ho APP, ebe u fetola joalo ka takatso ebe u tobetsa NGOLA ho hlahisa data e fetotsoeng ho T8FB.
• Tobetsa LOAD mme pop e tsoang ho 'Model Select' e tla bontša, tlanya NTSO ho etsa e ncha file /model/Model-New.txt. Tobetsa ho khetha le ho tlanya the file lebitso haufi le SYSTEM ho reha lebitso bocha. Seta lintlha tsohle ebe o tobetsa STORE ho li boloka tlasa lebitso la motho.
• Ha mekhahlelo STORE e le TXT file o hloka ho kenya, tlanya LOAD pele ho khetha ho data e bolokiloeng files ho APP ebe o tobetsa WRITE ho li kopitsa ho T8FB.

Hlokomela Haeba e ncha file e bōpiloe e lebetsoe ho reha lebitso empa STORE e le Model-New, data ho sena file e tla hloekisoa ka bo eona ha u leka ho theha e ncha file ho arolelana se tšoanang file lebitso.

Ho na le menyetla ea ho seta parameter e 7:

Che	Lenane
1	SERVO
2	MOTHEO
3	TSOHLE
4	TS'ELISO
5	TSAMAISO2
6	TH / PHOLISO
7	DR / Pheko
8	RETS'ELISITSOE

Mananeo a kaholimo kaofela a teng ho Android APP V7.1 le kaholimo. Menu No 1. ho ea ho 4 e teng ho Apple APP. APP ea morao-rao e tla ntlafatsoa khafetsa ho ofisiri ea RadioLink websebaka www.radiolink.com . 3.3.1 Menu ea SERVO.

SERVO Menu

Li-rectangles tse 8 li bonts'a mefuta ea li-servos tsa CH1-CH8 (likanale tse 4 tsa motheo le li-channel tse thusang tse 4) ho tloha ho le letšehali ho ea ho le letona. CH1–Aileron, CH2 – Elevator, CH3 – Throttle,CH4–Rudder, CH5 ho CH8–Likanale tse thusang.

MOLAO OA BASIC

Ho na le mekhahlelo e 6 ho setup e kenyeletsang "REV" "SUB" "EPA-L" "EPA-R" "F / S" "DELAY"

Tšenolo: E hlalosa kamano lipakeng tsa li-transmitter control le tlhahiso ea moamoheli bakeng sa liteishene tse nang le likhetho tsa NORM le REV. Etsa bonnete ba hore u sheba li-servos tsohle li ea tseleng e nepahetseng joalo ka ha takatso e laoloa. Etsa bonnete ba hore o sheba li-servos kaofela ha li ea sebakeng se nepahetseng se tlas'a taolo.

Hlokomela
Haeba ts'ebetso ea taolo e kopakaneng e sebelisoa ho laola li-servos tse 'maloa bakeng sa mapheo / li-glider tse tsitsitseng, mohlala. V-TAIL mix mix, etsa bonnete ba ho beha mohato ho qoba pherekano e ka bang teng.

TLHOKOMELISO: E etsa liphetoho tse nyane kapa litokiso ho boemo bo sa nke lehlakore ba servo ka 'ngoe. Ea kamehla ke 0 setting ka fektheri. Ka mantsoe a mang, ha ho na SUB-TRIM. Mefuta e tloha ho -100 ho ea ho +100 'me e ka fetoloa ka tlhoko ea sebele.
Ho eletsoa hore o kenye lits'oants'o tsa dijithale pele o etsa liphetoho tsa SUB-TRIM, mme o boloke litekanyetso tsohle tsa SUB-TRIM li le nyane kamoo ho ka khonehang. Bakeng sa ho thibela mefuta ea maeto a servo, ts'ebetso e khothalletsoang e tjena:

• Lekanya le ho rekota boemo ba bokaholimo boo u bo batlang;
• Tlosa SUB-TRIM;
• Hlahisa matsoho le likhokahano tsa servo e le hore taolo ea ho se nke lehlakore holim'a lefatše e nepahale kamoo ho ka khonehang;
• Fetola ka SUB-TRIM boleng bo nyane ba mefuta ho etsa litokiso tse ntle.

EPA-L & EPA-R: E beha sebaka sa kanale ka 'ngoe ka liperesentetage. Phetolelo e fetolehang ka ho fetesisa ea maeto ea fumaneha. E ikemela ka bo eona ntlheng e ngoe le e ngoe ea leeto la motho ka mong, ho fapana le maemo a le mong bakeng sa servo e amang mahlakore ka bobeli. Boleng ba mantlha ke 96 e fapaneng ho tloha ho 0 ho isa ho 120.

F / S: (Ha e bolokehe)tage. Mocha o mong le o mong o ka setoa ka boikemelo. Mosebetsi oa F / S (Fail Safe) o tsamaisa servo ka 'ngoe ho ea boemong bo reriloeng esale pele.

Hlokomela
Boemo ba throttle F / S bo boetse bo sebetsa ho voltage. F/S boleng 0 e bolela throttle stick sebakeng se tlaase-tlaase ha 50 e bolela sebakeng se bohareng. Ts'ebetso ea F/S (Fail-safe) e sebelisoa litlholisanong tse itseng ho netefatsa ho lula ho bolokehile ha mohlala pele o fofa le ho theoha. Ka lehlakoreng le leng, e ka boela ea sebelisoa ho etsa hore li-servos tsohle li nke lehlakore ho eketsa nako ea sefofane.

tieho: E lokisa karo-karolelano pakeng tsa boemo ba servos le ts'ebetso ea 'nete. Boleng ba kamehla ke 100 ka tlhophiso ea feme e bolelang hore ha ho tieho.

MOKHATLO Menyu

Ho na le mekhahlelo e mene ea ho seta: "D / R" "MAIKUTLO" "ELEVON" "V-TAIL"

D/R: E beha sesebelisoa se thusang ho laola litekanyetso tsa max le min tsa marang-rang a lekanang. Bulela "MIX" (kopanya taolo) pele ebe u khetha sesebelisoa se thusang ho phetla le ho beha boleng ba boholo ba max / min ho kanale ea sona e lumellanang ka ho fetola. Ka nako ea khaleampSetšoantšo se bontšitsoeng kaholimo: Ha o phethela SWA hodimo mme o fapoha thupa ea CH1, ho bolela hore palo ea max / min ea CH1 e ka ba + 100 le -100. Haeba boleng ba UP bo fetotsoe ho 50, ho bolela hore boholo ba max bo ka ba + 50 / -50 ha o fetolela CH1 hodimo le tlase. 'FATSI "e bolela ha o phetla SWA tlase, boleng ba max / min ba CH1 ke + 100 / -100.

Boikutlo: Khetha mocha o ratoang ho tloha ho CH5 ho ea ho CH8. CH5 e lula e le switch ea kamehla ho fetola maikutlo ha o hokela molaoli oa sefofane PIXHAWK / MINI PIX / APM / TURBO PIX ha CH7 e sa sebetse ha o hokela molaoli oa sefofane oa DJI. Bakeng sa kanale e sa fetoheng ho fetola maikutlo, ka kopo sheba bukana ea mosebelisi ea taolo ea sefofane.
Litekanyetso tse kamora mocha ka mong li bolela taolo e fapaneng ea percentage hlahisa matshwao a fapaneng a taolo. Melao ea kamehla ea T8FB ea boikutlo bo bong le bo bong e lumellana le litekanyetso tsa molaoli oa sefofane PIXHAWK/MINI PIX/APM/TURBO PIX. Ka mantsoe a mang, ha balaoli ba lifofane ba boletsoeng kaholimo ba sebelisoa le T8FB, maikutlo a ka khethoa ho Morero oa Morero mme ha ho hlokahale ho theha parameter e ikhethileng.

Elevone: Bulela "MIX" (kopanya taolo) pele, lokisa sebaka sa aileron 'me u lumelle phapang ea aileron.
Phetoho:

• CH1 le CH2 lia hlokahala.
• Maeto aileron a ikemetseng a ikemetseng a lumella phapang ea aileron.
• Maeto a lifti a fetolehang ka boikemelo a lumella liphapang maetong a holimo le a tlase.
• Litlhophiso tse arohaneng tsa ELEVON bakeng sa boemo ka bong li ka setoa. (KHAOLO feela)

V-mohatla: Mosebetsi ona o sebelisoa sefofaneng sa V-tail. Ho kopanya V-TAIL ho sebelisoa le sefofane sa v mohatla e le hore mesebetsi ea lifti le rudder e kopane bakeng sa libaka tse peli tsa mohatla. Ho tsamaea ka lifti le li-rudder ho ka lokisoa ka boikemelo sebakeng se seng le se seng.

RETS'ELISITSOE MATLOTLO:

• CH2 le CH4 lia hlokahala.
• maeto a ikemetseng a ikemetseng a lumella liphapang maetong a servo.
• Phapang ea Rudder ha e fumanehe. Ho theha phapang ea lisekere, beha RUDD1 le RUDD2 joalo ka 0, ebe u sebelisa metsoako e 'meli e hlophisehang ho SYSTEM Menu, RUD-ELE le RUD-RUD, ho beha li-percen tse fapanengtages hodimo le tlase. Tsena ke maeto a macha a ho laola. Tlosa trima le khokahano, switjha kabelo ea null hore lepolanka le se ke la tima ka phoso.

Hlokomela

Ts'ebetso ea V-TAIL le mesebetsi ea motsoako oa ELEVON/AILEVATOR e ke ke ea etsoa ka nako e le 'ngoe. Etsa bonnete ba hore o tsamaisa lifti le lithupa tsa mapolanka khafetsa ha o ntse o sheba litšisinyo tsa servo. Haeba boleng bo boholo ba maeto bo behiloe, ha lithupa li tsamaisoa ka nako e le 'ngoe, litsamaiso li ka 'na tsa ferekanya ka bobeli kapa tsa felloa ke leeto. Fokotsa leeto ho fihlela ho se tšitiso e hlahang. 3.3.4

LITLHAKISO Menu
Ho na le limenu tsa sistimi tse peli ka ho felletseng ho Android APP ka bongata ba litsamaiso tsa ho kopanya tse hlophisehileng bo eketsehile ho isa ho tse nne.

KHAU-CH
CH5 / 6/7/8 e ka etsoa ka tsela ea motho ka mokhoa o fapaneng ho li-switch tse fapaneng. Haeba efe kapa efe ea liteishene tse thusang e sa sebelisoe, NULL e lokela ho setoa.
TX-ALARM
Vol e tlase ea kamehlatagBoleng bo ikemiselitse ka bohona ho latela betri e sebelisitsoeng (2S 7.3V / 3S-11.0V) hape e ka ba ea motho ka mong. Ha se fetisang voltage e ka tlase ho boleng bo behiloeng, T8FB e tla etsa hore D e utloahale ho lemosa.
STK-MODE (SYSTEM)
Kamehla ke mokhoa oa kamehla oa T8FB o nang le data BALA ke APP.
Mokhoa oa Bobeli: letsetsoa thabo-Rudder le Elevator; thabo e nepahetseng-Aileron le Throttle
Mokhoa oa Bobeli: letlapa la thabo-Rudder le Throttle, thabo ea letsoho le letona-Aileron le Elevator
Mokhoa oa Bobeli: letlapa la thabo le letšehali-Aileron le Elevator, tokelo ea thabo-Rudder le Throttle
Mokhoa oa Bobeli: ka ho le letšehali joystick- Aileron le Throttle, ka ho le letona joystick-Rudder le Elevator
VERSION (Tlas'a STK-MODE, SYSTEM)
Linomoro li bolela liphetolelo tsa hajoale tsa firmware tse ka ntlafatsoang. Mehato e qaqileng ea ntlafatso ea firmware.
Hlokomela Mofuta o mong o ka ho le letona (kaholimo ho SYSTEM2) ke mofuta oa APP.
EXT-ALARM (SYSTEM2)
Ho khutlisa mohlala voltage, baamoheli ba RadioLink ba mesebetsi ea telemetry R7FG kapa R8F ba lokela ho sebelisoa. Vol e tlasetagboleng ba alamo bo ka etsoa ka tsela ea motho ka mong. Ha mohlala voltage ea tlase ho boleng bo behiloeng, T8FB e tla etsa hore D e utloahale ho lemosa. * Ts'ebetso ena hajoale e fumaneha ho Android APP V7.1 le holimo.
RSSI-ALARM (SYSTEM2)
Boleng ba alamo ea RSSI bo ka etsoa motho ka mong. Ha RSSI e theoha ho feta boleng bo behiloeng, T8FB e tla etsa molumo oa D ho lemosa.

• Ts'ebetso ena hajoale e fumaneha ho Android APP V7.1 le holimo.

SEHLOOHO

Lisebelisoa tsa ho kopanya tse hlophisitsoeng li lokela ho

1. Fapantsha liphetoho tsa maikutlo ho lifofane (mohlala, Rolling ho elelloa ha lesokoana le laeloa);
2. Laola selepe se itseng ka li-servos tse peli kapa ho feta (mohlala, litsuiso tse 2 tsa tsamaiso);
3. Lokisa motsamao o ikhethileng ka boiketsetso (mohlala, Lower FLAP le servos ea ELEVATOR ka nako e le ngoe);
4. Laola kanale ea bobeli ho arabela motsamao oa kanale ea pele (mohlala Eketsa oli ea mosi ho arabela ka lebelo le phahameng, empa hafeela switch ea mosi e butsoe) .;
5. Tima taolo e kholo tlasa maemo a itseng (mohlala, Bakeng sa lifofane tse nang le enjene tse peli, tima enjene kapa u potlakise / ho theosa enjene e le 'ngoe ho thusa lesela ho reteleha)

Ho feto-fetoha ha maemo: Channel 1 ho isa ho ea 8 e ka etsoa ka nosi ho kopanya.
MAS: Mocha o moholo. Likanale tse ling li hloka ho sebelisana le metsamao ea likanale tse kholo.
SLA: Kanale ea makhoba. Litaolo tse ngata tsa motsoako li laoloa ke mocha o le mong o moholo.
Mohlala Rudder Aileron o kopanya taolo le Master joalo ka rudder ha Lekhoba e le aileron le OFFS joalo ka 0 le UP joalo ka 25% ho lokisa rolling. Ha ho hlokahale switch.

Setup ea THROTTLE 

Ts'ebetso ena e ka fumaneha ka taolo ea T8FB e hlophisitsoeng ea taolo ea motswako.
Ho SYSTEM Menu, bulela Mix Control, seta Master joalo ka CH1 ha Makhoba e le CH8 ka boleng ba OFFS e le -100. Ebe ho Mecha e ntlafalitsoeng, bulela ts'ebetso ea D / R MIX, seta CH joalo ka CH3 le boleng ba DOWN e le 0. Ebe u chencha CH8 Toggle-switch ho ea ho le letona ka ho fetesisa mme maemo a phethehile.

• Ho na le litsamaiso tse 4 tsa ho kopanya ka ho felletseng ho Android APP V7.1 le kaholimo ha tse 2 li kopanya taolo ho Apple APP.

TH / PHOLISO

Throttle curve ke mokhoa o hlophisitsoeng oa ho tsamaea ka throttle. Ke ho hokahanya karabelo ea enjene le ts'ebetso ea throttle. Sebaka se otlolohileng ke boemo ba "joystick" ha e otlolohileng e le tlhahiso ea throttle. * Lenane lena ha joale le fumaneha ho Android APP V7.1 le holimo.

DR / Pheko

Sekhahla se kopantsoeng habeli ke mosebetsi ho tloha maetong a fapaneng a servo ho fihlela taolo e fapaneng. Bakeng sa example, sefofane se hloka maeto a fapaneng a boholo ba servo bakeng sa maemo a fapaneng a ho fofa, bafofisi ba lifofane ba ka sebelisa ts'ebetso ena ho furalla maqhubu a fapaneng a servo.

• Lenaneo lena hajoale le fumaneha ho Android APP V7.1 le kaholimo.

RETS'ELISITSOE

Mosebetsi ona ke ho tsosolosa boemo ba fektheri ha ho hlokahala. Ha o tobetsa konopo ena, T8FB e tla etsa melumo e meraro e liehang ea D, ho bolelang hore maemo a kamehla a setiloe.

T8FB Parameters Setup ka Khomphuta

Ho kenya Software le Khokelo

1. Hokela komporo ho T8FB ka thapo ea data ea USB ea android
2. Bula software ea parameter setup ho file e jarollotsoeng file, Ebe matla ho T8FB
   
3. Khetha Port Number (port ea COM e tla khetholloa ka bo eona ha e hokahane), ho beha sekhahla sa baud: 115200, 8-1-None (likotoana tse 8 tsa data, 1 stop bit, cheke ea parity), tlanya OPEN ho hokela. Mefuta ena e ka lehlakoreng le letona la software.
4. T8FB e tla tsoela pele ho etsa melumo ea D, tobetsa likonopo life kapa life tsa trimmer ho emisa melumo ea DD.
   Hlokomela: Ha o tobetsa HO BULA ho hokela, likarolo tsa SETTING tse boletsoeng kaholimo li tla ba putsoa 'me li ke ke tsa fetoloa mme LITLHAKISO tsa T8FB e hokahantsoeng e kenyelletsa TX-ALARM / STK MODE / VERSION, ka letsohong le letona le tla bontšoa.
   

Menyu ea Setha ea Paramente

BALA: Lintlha tsa T8FB li tla baloa le ho hlahisoa komporong ha u tobetsa "READ". Li-LED tse peli tse ka ho le letona li tla benya hang ka nako e le 'ngoe ka melumo e 'meli ea D.
MORALO: Lintlha file ka mokhoa oa TXT o bolokiloeng o tla jarisoa ka har'a software. Tobetsa "sheba" ho khetha lintlha tse ratoang file 'me u e kenye software.

HLAHALA: Fetola ya data e le takatso kapa laela ya data e bolokoa e le file ebe o tobetsa "UPDATE" ho kenya parameter e ncha ho T8FB. (Li-LED tse peli tse tala ka ho le letona li tla khantša hanyenyane ka melumo e 'meli ea D. Tobetsa bonyane ka makhetlo a mane ho netefatsa hore data e fetotsoeng e kenngoa hantle kapa e matlafatsa T8FB ho tiisa habeli haeba data e kenngoa hantle).
BOLOKA: Lintlha tse baloang kapa sete li tla bolokoa joalo ka TXT file khomphuteng. Sena se thusa haholo haeba ho na le lihlopha tse 'maloa tsa lintlha tsa seea-le-moea tse hlokang ho bolokoa kapa haeba mekhahlelo e le' ngoe e hloka ho kopitsoa liradio tse fapaneng.

Methati e Behang Mehato

• Ha mekhahlelo e hloka ho fetoloa, tlanya BALA pele ho kenya data ea mantlha ho software, ebe u e fetola ka moo o lakatsang ka teng ebe o tobetsa UPDATE ho hlahisa data e fetotsoeng ho T8FB.
• Ha mekhahlelo e SIRELETSA joalo ka TXT file o hloka ho kenya, tlanya LOAD pele ho kenya lintlha tse bolokiloeng ho software ebe o tobetsa HLAHISA ho li kopitsa ho T8FB.

MOLAO OA BASIC

Ho na le mekhahlelo e 6 ho setup: "REVERSE" "SUB-TRIM" "END POINT" "FAIL SAFE" "AUX-CH" "lieha"

KHETHO: E hlalosa kamano lipakeng tsa li-transmitter le sehlahisoa se amohelang liteishene ka khetho ea NORM le REV. Sheba 3.3.2-REV (P7) bakeng sa lintlha tse ling.

TLHOKOMELISO:
E etsa liphetoho tse nyane kapa o lokisa maemo a se nang lehlakore a servo ka 'ngoe. Sheba 3.3.2-SUB (P8) bakeng sa lintlha tse ling.

NTLHA YA HO QETELA:
E beha sebaka sa kanale ka 'ngoe (ka liperesentetage);
Phetolelo e fetolehang ka ho fetesisa ea maeto ea fumaneha. E ikemela ka bo eona ntlheng e ngoe le e ngoe ea leeto la motho ka mong, ho fapana le maemo a le mong bakeng sa servo e amang mahlakore ka bobeli. Sheba 3.3.2-EPA-L & EPA-R (P8) bakeng sa lintlha tse ling.

SIRELETSA:
E beha ketso e arabelang ea mohlala haeba ho na le tahlehelo ea lets'oao kapa molumo o tlase oa Rxtage (ho percentage). Sheba 3.3.2-F / S (P8) bakeng sa lintlha tse ling.

AUX-CH:
E hlalosa kamano lipakeng tsa li-transmitter control le tlhahiso ea moamoheli bakeng sa likanale 5-8. Sheba 3.3.4(P10) bakeng sa lintlha tse ling.

tieho:
Fetola karolelano pakeng tsa boemo ba servos le ts'ebetso ea 'nete. Sheba 3.3.2-DELAY (P8) bakeng sa lintlha tse ling.

TX-ALARM:
Vol e tlase ea kamehlatagBoleng bo ikemiselitse ka bohona ho latela betri e sebelisitsoeng (2S-7.3V / 3S-11.0V) hape e ka ba ea motho ka mong. Ha se fetisang voltage e ka tlase ho boleng bo behiloeng, T8FB e tla etsa hore D e utloahale ho lemosa.

STK-MOKHOA
Kamehla ke mokhoa oa kamehla oa T8FB o nang le data BALA ke APP.
Mokhoa oa Bobeli: le letšehali joystick-Rudder le Elevator; le letona joystick-Aileron le Throttle
Mokhoa oa Bobeli: letlapa la thabo-Rudder le Throttle, thabo ea letsoho le letona-Aileron le Elevator
Mokhoa oa Bobeli: letlapa la thabo le letšehali-Aileron le Elevator, tokelo ea thabo-Rudder le Throttle
Mokhoa oa Bobeli: ka ho le letšehali joystick- Aileron le Throttle, ka ho le letona joystick-Rudder le Elevator

TŠEBELETSO
Linomoro li bolela mefuta e fapaneng ea firmware e ka ntlafatsoang. Mehato e qaqileng ea ntlafatso ea firmware.

MOKHATLO Menyu

Ho na le li-parameter tse tšeletseng ”D/R” “ATTITUDE” “ELEVON” “V TAIL”PROG.MIX1/PROG.MIX2 joalokaha ho bontšitsoe ka tlase, ka kopo sheba 3.3.3 (P10-11) le 3.3.4(P11-12) bakeng sa lintlha tse ling ..

Setšoantšo sa T8FB

• Boholo: 173*102*206mm
• Boima ba 'mele: 0.47kg
• Tshebetso Voltage: 4.8~18V
• Ts'ebetso ea Hona Joale: <80mA
• Maqhubu a Tlhahiso: Sehlopha sa 2.4GHz ISM (2400MHz ~ 2483.5MHz)
• Modulation Mode: GFSK
• Phatlalatsa Spectrum: FHSS 67 likanale pseudo-random frequency hopping
• Sebaka sa Taolo: 2000 mitha (Boholo bo lekiloeng libakeng tse sa sebetsoang ntle le tšitiso mme bo ka fapana ho latela melaoana ea lehae)
• Phetiso Matla: <100mW (20dBM)
• Sebetsa ka ho nepahetseng Karolo: 4096, 0.5us / karolo
• Bahiri ba lumellanang: R8EF(E tloaelehileng),R8SM, R8FM, R8F,R7FG, R6FG, R6F, R4FGM,R4F

Tlhaloso ea R8EF

• Boholo: 41.5*21.5*11.5mm
• Boima ba 'mele: 14g
• Channel: 8CH
• Khumo ea Letšoao: SBUS & PPM & PWM
• Ts'ebetso ea Hona Joale: 30mA
• Tshebetso Voltage: 4.8-10V
• Sebaka sa Taolo: 2km moeeng (Boemo bo phahameng bo lekiloeng libakeng tse sa tsitsang ntle le tšitiso 'me bo ka fapana ho latela melao ea lehae)
• Lisebelisoa tse lumellanang: T8FB / T8S / RC6GS V2 / RC4GS V2

Ke leboha hape ka ho khetha sehlahisoa sa RadioLink.

 

Litokomane / Lisebelisoa

	RadioLink T8FB 8-Channel Remote Controller [pdf] Bukana ea Mosebelisi T8FB, 8-Channel Remote Controller
	RadioLink T8FB 8-Channel Remote Controller [pdf] Bukana ea Mosebelisi T8FB 8-Channel Remote Controller, T8FB, 8-Channel Remote Controller, Remote Controller, Controller

Litšupiso

• Bukana ea Mosebelisi